Role of bundle helices in a regulatory crosstalk in the trimeric betaine transporter BetP

The Na⁺-coupled betaine symporter BetP regulates transport activity in response to hyperosmotic stress only in its trimeric state, suggesting a regulatory crosstalk between individual protomers. BetP shares the overall fold of two inverted structurally related five-transmembrane (TM) helix repeats with the sequence-unrelated Na⁺-coupled symporters LeuT, vSGLT, and Mhp1, which are neither trimeric nor regulated in transport activity. Conformational changes characteristic for this transporter fold involve the two first helices of each repeat, which form a four-TM-helix bundle. Here, we identify two ionic networks in BetP located on both sides of the membrane that might be responsible for BetP's unique regulatory behavior by restricting the conformational flexibility of the four-TM-helix bundle. The cytoplasmic ionic interaction network links both first helices of each repeat in one protomer to the osmosensing C-terminal domain of the adjacent protomer. Moreover, the periplasmic ionic interaction network conformationally locks the four-TM-helix bundle between the same neighbor protomers. By a combination of site-directed mutagenesis, cross-linking, and betaine uptake measurements, we demonstrate how conformational changes in individual bundle helices are transduced to the entire bundle by specific inter-helical interactions. We suggest that one purpose of bundle networking is to assist crosstalk between protomers during transport regulation by specifically modulating the transition from outward-facing to inward-facing state.     

Structure of the food-poisoning Clostridium perfringens enterotoxin reveals similarity to the aerolysin-like pore-forming toxins

Clostridium perfringens enterotoxin (CPE) is a major cause of food poisoning and antibiotic-associated diarrhea. Upon its release from C. perfringens spores, CPE binds to its receptor, claudin, at the tight junctions between the epithelial cells of the gut wall and subsequently forms pores in the cell membranes. A number of different complexes between CPE and claudin have been observed, and the process of pore formation has not been fully elucidated. We have determined the three-dimensional structure of the soluble form of CPE in two crystal forms by X-ray crystallography, to a resolution of 2.7 and 4.0 Å, respectively, and found that the N-terminal domain shows structural homology with the aerolysin-like β-pore-forming family of proteins. We show that CPE forms a trimer in both crystal forms and that this trimer is likely to be biologically relevant but is not the active pore form. We use these data to discuss models of pore formation.     

Molecular architecture and structural transitions of a Clostridium thermocellum mini-cellulosome

The cellulosome is a highly elaborate cell-bound multienzyme complex that efficiently orchestrates the deconstruction of cellulose and hemicellulose, two of the nature's most abundant polymers. Understanding the intricacy of these nanomachines evolved by anaerobic microbes could sustain the development of an effective process for the conversion of lignocellulosic biomass to bio-ethanol. In Clostridium thermocellum, cellulosome assembly is mediated by high-affinity protein:protein interactions (> 10⁹ M^− 1) between dockerin modules found in the catalytic subunits and cohesin modules located in a non-catalytic protein scaffold termed CipA. Whereas the atomic structures of several cellulosomal components have been elucidated, the structural organization of the complete cellulosome remains elusive. Here, we reveal that a large fragment of the cellulosome presents a mostly compact conformation in solution, by solving the three-dimensional structure of a C. thermocellum mini-cellulosome comprising three consecutive cohesin modules, each bound to one Cel8A cellulase, at 35 Å resolution by cryo-electron microscopy. Interestingly, the three cellulosomal catalytic domains are found alternately projected outward from the CipA scaffold in opposite directions, in an arrangement that could expand the area of the substrate accessible to the catalytic domains. In addition, the cellulosome can transit from this compact conformation to a multitude of diverse and flexible structures, where the linkers between cohesin modules are extended and flexible. Thus, structural transitions controlled by changes in the degree of flexibility of linkers connecting consecutive cohesin modules could regulate the efficiency of substrate recognition and hydrolysis.     

Identification of a Unique Fe-S Cluster Binding Site in a Glycyl-Radical Type Microcompartment Shell Protein

Recently, progress has been made toward understanding the functional diversity of bacterial microcompartment (MCP) systems, which serve as protein-based metabolic organelles in diverse microbes. New types of MCPs have been identified, including the glycyl-radical propanediol (Grp) MCP. Within these elaborate protein complexes, BMC-domain shell proteins [bacterial microcompartment (in reference to the shell protein domain)] assemble to form a polyhedral barrier that encapsulates the enzymatic contents of the MCP. Interestingly, the Grp MCP contains a number of shell proteins with unusual sequence features. GrpU is one such shell protein whose amino acid sequence is particularly divergent from other members of the BMC-domain superfamily of proteins that effectively defines all MCPs. Expression, purification, and subsequent characterization of the protein showed, unexpectedly, that it binds an iron-sulfur cluster. We determined X-ray crystal structures of two GrpU orthologs, providing the first structural insight into the homohexameric BMC-domain shell proteins of the Grp system. The X-ray structures of GrpU, both obtained in the apo form, combined with spectroscopic analyses and computational modeling, show that the metal cluster resides in the central pore of the BMC shell protein at a position of broken 6-fold symmetry. The result is a structurally polymorphic iron-sulfur cluster binding site that appears to be unique among metalloproteins studied to date.     

DynBench3D,a Web-Resource to Dynamically Generate Benchmark Sets of Large Heteromeric Protein Complexes

Multi-protein machines are responsible for most cellular tasks, and many efforts have been invested in the systematic identification and characterization of thousands of these macromolecular assemblies. However, unfortunately, the (quasi) atomic details necessary to understand their function are available only for a tiny fraction of the known complexes. The computational biology community is developing strategies to integrate structural data of different nature, from electron microscopy to X-ray crystallography, to model large molecular machines, as it has been done for individual proteins and interactions with remarkable success. However, unlike for binary interactions, there is no reliable gold-standard set of three-dimensional (3D) complexes to benchmark the performance of these methodologies and detect their limitations. Here, we present a strategy to dynamically generate non-redundant sets of 3D heteromeric complexes with three or more components. By changing the values of sequence identity and component overlap between assemblies required to define complex redundancy, we can create sets of representative complexes with known 3D structure (i.e., target complexes). Using an identity threshold of 20% and imposing a fraction of component overlap of < 0.5, we identify 495 unique target complexes, which represent a real non-redundant set of heteromeric assemblies with known 3D structure. Moreover, for each target complex, we also identify a set of assemblies, of varying degrees of identity and component overlap, that can be readily used as input in a complex modeling exercise (i.e., template subcomplexes). We hope that resources like this will significantly help the development and progress assessment of novel methodologies, as docking benchmarks and blind prediction contests did. The interactive resource is accessible at https://DynBench3D.irbbarcelona.org.     

Conformations of NhaA, the Na/H Exchanger from Escherichia coli, in the pH-Activated and Ion-Translocating States

NhaA, the main sodium-proton exchanger in the inner membrane of Escherichia coli, regulates the cytosolic concentrations of H and Na. It is inactive at acidic pH, becomes active between pH 6 and pH 7, and reaches maximum activity at pH 8. By cryo-electron microscopy of two-dimensional crystals grown at pH 4 and incubated at higher pH, we identified two sequential conformational changes in the protein in response to pH or substrate ions. The first change is induced by a rise in pH from 6 to 7 and marks the transition from the inactive state to the pH-activated state. pH activation, which precedes the ion-induced conformational change, is accompanied by an overall expansion of the NhaA monomer and a local ordering of the N-terminus. The second conformational change is induced by the substrate ions Na and Li at pH above 7 and involves a 7-Å displacement of helix IVp. This movement would cause a charge imbalance at the ion-binding site that may trigger the release of the substrate ion and open a periplasmic exit channel.     

Erratum to “Conformations of NhaA, the Na/H Exchanger from Escherichia coli, in the pH-Activated and Ion-Translocating States” [J. Mol. Biol. 386 (2009) 351-385]: Conformations of NhaA, the Na/H Exchanger from Escherichia coli, in the pH-Activated and Ion-Translocating States

NhaA, the main sodium-proton exchanger in the inner membrane of Escherichia coli, regulates the cytosolic concentrations of H⁺ and Na⁺. It is inactive at acidic pH, becomes active between pH 6 and pH 7, and reaches maximum activity at pH 8. By cryo-electron microscopy of two-dimensional crystals grown at pH 4 and incubated at higher pH, we identified two sequential conformational changes in the protein in response to pH or substrate ions. The first change is induced by a rise in pH from 6 to 7 and marks the transition from the inactive state to the pH-activated state. pH activation, which precedes the ion-induced conformational change, is accompanied by an overall expansion of the NhaA monomer and a local ordering of the N-terminus. The second conformational change is induced by the substrate ions Na⁺ and Li⁺ at pH above 7 and involves a 7-Å displacement of helix IVp. This movement would cause a charge imbalance at the ion-binding site that may trigger the release of the substrate ion and open a periplasmic exit channel.     

Two Alternative Conformations of a Voltage-Gated Sodium Channel

Activation and inactivation of voltage-gated sodium channels (Navs) are well studied, yet the molecular mechanisms governing channel gating in the membrane remain unknown. We present two conformations of a Nav from Caldalkalibacillus thermarum reconstituted into lipid bilayers in one crystal at 9 Å resolution based on electron crystallography. Despite a voltage sensor arrangement identical with that in the activated form, we observed two distinct pore domain structures: a prominent form with a relatively open inner gate and a closed inner-gate conformation similar to the first prokaryotic Nav structure. Structural differences, together with mutational and electrophysiological analyses, indicated that widening of the inner gate was dependent on interactions among the S4–S5 linker, the N-terminal part of S5 and its adjoining part in S6, and on interhelical repulsion by a negatively charged C-terminal region subsequent to S6. Our findings suggest that these specific interactions result in two conformational structures.     

The EM structure of a type I interferon-receptor complex reveals a novel mechanism for cytokine signaling

Type I interferons (IFNs) have pleiotropic effects, including antiviral, antiproliferative, and immunomodulatory responses. All type I IFNs bind to a shared receptor consisting of the two transmembrane proteins ifnar1 and ifnar2. We used negative stain electron microscopy to calculate a three-dimensional reconstruction of the ternary complex formed by a triple mutant IFN α2 with the ectodomains of ifnar1 and ifnar2. We present a model of the complex obtained by placing atomic models of subunits into the density map of the complex. The complex of IFN α2 with its receptor (a class II cytokine receptor) shows structural similarities to the complexes formed by growth hormone and erythropoietin with their receptors (members of the class I cytokine receptor family). Despite different assembly mechanisms, class I and class II cytokine receptors thus appear to initiate signaling through similar arrangements of the receptors induced by the binding of their respective ligands.     

Structural basis for chitotetraose coordination by CGL3, a novel galectin-related protein from Coprinopsis cinerea

Recent advances in genome sequencing efforts have revealed an abundance of novel putative lectins. Among these, many galectin-related proteins, characterized by many conserved residues but intriguingly lacking critical amino acids, have been found in all corners of the eukaryotic superkingdom. Here we present a structural and biochemical analysis of one representative, the galectin-related lectin CGL3 found in the inky cap mushroom Coprinopsis cinerea. This protein contains all but one conserved residues known to be involved in β-galactoside binding in galectins. A Trp residue strictly conserved among galectins is changed to an Arg in CGL3 (R81). Accordingly, the galectin-related protein is not able to bind lactose. Screening of a glycan array revealed that CGL3 displays preference for oligomers of β1-4-linked N-acetyl-glucosamines (chitooligosaccharides) and GalNAcβ1-4GlcNAc (LacdiNAc). Carbohydrate-binding affinity of this novel lectin was quantified using isothermal titration calorimetry, and its mode of chitooligosaccharide coordination not involving any aromatic amino acid residues was studied by X-ray crystallography. Structural information was used to alter the carbohydrate-binding specificity and substrate affinity of CGL3. The importance of residue R81 in determining the carbohydrate-binding specificity was demonstrated by replacing this Arg with a Trp residue (R81W). This single-amino-acid change led to a lectin that failed to bind chitooligosaccharides but gained lactose binding. Our results demonstrate that, similar to the legume lectin fold, the galectin fold represents a conserved structural framework upon which dramatically altered specificities can be grafted by few alterations in the binding site and that, in consequence, many metazoan galectin-related proteins may represent lectins with novel carbohydrate-binding specificities.     

Structural basis for myopathic defects engendered by alterations in the myosin rod

While mutations in the myosin subfragment 1 motor domain can directly disrupt the generation and transmission of force along myofibrils and lead to myopathy, the mechanism whereby mutations in the myosin rod influences mechanical function is less clear. Here, we used a combination of various imaging techniques and molecular dynamics simulations to test the hypothesis that perturbations in the myosin rod can disturb normal sarcomeric uniformity and, like motor domain lesions, would influence force production and propagation. We show that disrupting the rod can alter its nanomechanical properties and, in vivo, can drive asymmetric myofilament and sarcomere formation. Our imaging results indicate that myosin rod mutations likely disturb production and/or propagation of contractile force. This provides a unifying theory where common pathological cascades accompany both myosin motor and specific rod domain mutations. Finally, we suggest that sarcomeric inhomogeneity, caused by asymmetric thick filaments, could be a useful index of myopathic dysfunction.     

Projection structure of channelrhodopsin-2 at 6 Å resolution by electron crystallography

Channelrhodopsin-2 (ChR2) is the prototype of a new class of light-gated ion channels that is finding widespread applications in optogenetics and biomedical research. We present a  6-Å projection map of ChR2, obtained by cryo-electron microscopy of two-dimensional crystals grown from pure, heterologously expressed protein. The map shows that ChR2 is the same dimer with non-crystallographic 2-fold symmetry in three different membrane crystals. This is consistent with biochemical analysis, which shows a stable dimer in detergent solution. Comparison to the projection map to bacteriorhodopsin indicates a similar structure of seven transmembrane alpha helices. Based on the projection map and sequence alignments, we built a homology model of ChR2 that potentially accounts for light-induced channel gating. Although a monomeric channel is not ruled out, comparison to other membrane channels and transporters suggests that the ChR2 channel is located at the dimer interface on the 2-fold axis, lined by transmembrane helices 3 and 4.     

Structure and regulatory mechanism of Aquifex aeolicus NtrC4: variability and evolution in bacterial transcriptional regulation

Genetic changes lead gradually to altered protein function, making deduction of the molecular basis for activity from a sequence difficult. Comparative studies provide insights into the functional consequences of specific changes. Here we present structural and biochemical studies of NtrC4, a sigma-54 activator from Aquifex aeolicus, and compare it with NtrC1 (a paralog) and NtrC (a homolog from Salmonella enterica) to provide insight into how a substantial change in regulatory mechanism may have occurred. Activity assays show that assembly of NtrC4's active oligomer is repressed by the N-terminal receiver domain, and that BeF₃ ⁻ addition (mimicking phosphorylation) removes this repression. Observation of assembly without activation for NtrC4 indicates that it is much less strongly repressed than NtrC1. The crystal structure of the unactivated receiver-ATPase domain combination shows a partially disrupted interface. NMR structures of the regulatory domain show that its activation mechanism is very similar to that of NtrC1. The crystal structure of the NtrC4 DNA-binding domain shows that it is dimeric and more similar in structure to NtrC than NtrC1. Electron microscope images of the ATPase-DNA-binding domain combination show formation of oligomeric rings. Sequence alignments provide insights into the distribution of activation mechanisms in this family of proteins.     

Solution Structure of Human ζ-COP: Direct Evidences for Structural Similarity between COP I and Clathrin-Adaptor Coats

COP-I-coated vesicles are protein and lipid carriers that mediate intra-Golgi transport and transport from the cis-Golgi complex to the endoplasmic reticulum in cells. The coatomer of the vesicles coat is comprised of seven subunits: α-COP, ?-COP, β′-COP, β-COP, γ-COP, δ-COP, and ζ-COP. Here we report the solution structure of a truncated form (residues 1-149; ζ-COP149) of human ζ-COP (total 177 residues). It is the first three-dimensional structure of a “core” subunit of the COP I F-subcomplex. The structure of ζ-COP149 mainly consists of a disordered N-terminal tail, a five-stranded antiparallel β-sheet, a two-stranded antiparallel β-sheet, and five α-helices. The global folding of ζ-COP149 is very similar to the crystal structures of AP1-σ1 and AP2-σ2, directly demonstrating the structural similarity between the “core” subunits of the COP I F-subcomplex and adaptor protein complexes. Through structural comparison and mutagenesis study, we have also demonstrated that the heterodimers of ζ-COP149 and γ-COP have packing interfaces and relative subunit orientations similar to those of AP2-σ2 and AP2-α heterodimers. These results provide direct evidence supporting the previous proposal that the COP I F-subcomplex and adaptor protein complexes have similar tertiary and quaternary structures.     

The Four Canonical TPR Subunits of Human APC/C Form Related Homo-Dimeric Structures and Stack in Parallel to Form a TPR Suprahelix

The anaphase-promoting complex or cyclosome (APC/C) is a large E3 RING-cullin ubiquitin ligase composed of between 14 and 15 individual proteins. A striking feature of the APC/C is that only four proteins are involved in directly recognizing target proteins and catalyzing the assembly of a polyubiquitin chain. All other subunits, which account for > 80% of the mass of the APC/C, provide scaffolding functions. A major proportion of these scaffolding subunits are structurally related. In metazoans, there are four canonical tetratricopeptide repeat (TPR) proteins that form homo-dimers (Apc3/Cdc27, Apc6/Cdc16, Apc7 and Apc8/Cdc23). Here, we describe the crystal structure of the N-terminal homo-dimerization domain of Schizosaccharomyces pombe Cdc23 (Cdc23^Nterm). Cdc23^Nterm is composed of seven contiguous TPR motifs that self-associate through a related mechanism to those of Cdc16 and Cdc27. Using the Cdc23^Nterm structure, we generated a model of full-length Cdc23. The resultant “V”-shaped molecule docks into the Cdc23-assigned density of the human APC/C structure determined using negative stain electron microscopy (EM). Based on sequence conservation, we propose that Apc7 forms a homo-dimeric structure equivalent to those of Cdc16, Cdc23 and Cdc27. The model is consistent with the Apc7-assigned density of the human APC/C EM structure. The four canonical homo-dimeric TPR proteins of human APC/C stack in parallel on one side of the complex. Remarkably, the uniform relative packing of neighboring TPR proteins generates a novel left-handed suprahelical TPR assembly. This finding has implications for understanding the assembly of other TPR-containing multimeric complexes.     

Structural Determinants for Improved Stability of Designed Ankyrin Repeat Proteins with a Redesigned C-Capping Module

Designed ankyrin repeat proteins (DARPins) that specifically bind to almost any target can be obtained by ribosome display or phage display from combinatorial libraries. Although DARPins are already very stable molecules, molecular dynamics simulations, equilibrium denaturation experiments, structural studies, and recent NMR experiments suggested that the unfolding of the original C-terminal capping repeat (C-cap), taken from a natural ankyrin repeat protein, limits the stability of the initial DARPin design. Several point mutations had been introduced to optimize the C-cap and were shown to indeed further increase the stability of DARPins. We now determined crystal structures of DARPins with one or three full-consensus internal repeats (NI₁C or NI₃C) between an N-terminal capping repeat and mutants of the C-cap. An NI₁C mutant, in which the C-cap was only extended by three additional helix-forming residues, showed no structural change but reduced B-factors in the C-cap. An NI₃C C-cap mutant carrying five additional mutations in the interface to the preceding repeat, previously designed by using the consensus sequence as a guide, showed a rigid-body movement of the C-cap towards the internal repeat. This movement results in an increased buried surface area and a superior surface complementarity and explains the improved stability in equilibrium unfolding, compared to the original C-cap. A C-cap mutant with three additional mutations introducing suitably spaced charged residues did not show formation of salt bridges, explaining why its stability was not increased further. These structural studies underline the importance of repeat coupling for stability and help in the further design of this protein family.     

Structural Information, Resolution, and Noise in High-Resolution Atomic Force Microscopy Topographs

AFM has developed into a powerful tool in structural biology, providing topographs of proteins under close-to-native conditions and featuring an outstanding signal/noise ratio. However, the imaging mechanism exhibits particularities: fast and slow scan axis represent two independent image acquisition axes. Additionally, unknown tip geometry and tip-sample interaction render the contrast transfer function nondefinable. Hence, the interpretation of AFM topographs remained difficult. How can noise and distortions present in AFM images be quantified? How does the number of molecule topographs merged influence the structural information provided by averages? What is the resolution of topographs? Here, we find that in high-resolution AFM topographs, many molecule images are only slightly disturbed by noise, distortions, and tip-sample interactions. To identify these high-quality particles, we propose a selection criterion based on the internal symmetry of the imaged protein. We introduce a novel feature-based resolution analysis and show that AFM topographs of different proteins contain structural information beginning at different resolution thresholds: 10 Å (AqpZ), 12 Å (AQP0), 13 Å (AQP2), and 20 Å (light-harvesting-complex-2). Importantly, we highlight that the best single-molecule images are more accurate molecular representations than ensemble averages, because averaging downsizes the z-dimension and “blurs” structural details.Abbreviations: 2D, two-dimensional; 3D, three-dimensional; ACV, auto-correlation value; AFM, atomic force microscopy; AQP0, aquaporin-0; AQP2, aquaporin-2; AqpZ, aquaporin-Z; bR, bacteriorhodopsin; CCV, cross-correlation value; CTF, contrast transfer function; DPR, differential phase residual; EM, electron microscopy; FRC, Fourier ring correlation; FSC, Fourier shell correlation; IS, internal symmetry; LH2, light-harvesting-complex 2; RMSD, root mean-square deviation; SD, standard deviation; SNR, signal/noise ratio; SSNR, spectral signal/noise ratio     

Tilt-pair analysis of images from a range of different specimens in single-particle electron cryomicroscopy

The comparison of a pair of electron microscope images recorded at different specimen tilt angles provides a powerful approach for evaluating the quality of images, image-processing procedures, or three-dimensional structures. Here, we analyze tilt-pair images recorded from a range of specimens with different symmetries and molecular masses and show how the analysis can produce valuable information not easily obtained otherwise. We show that the accuracy of orientation determination of individual single particles depends on molecular mass, as expected theoretically since the information in each particle image increases with molecular mass. The angular uncertainty is less than 1° for particles of high molecular mass (∼ 50 MDa), several degrees for particles in the range 1-5 MDa, and tens of degrees for particles below 1 MDa. Orientational uncertainty may be the major contributor to the effective temperature factor (B-factor) describing contrast loss and therefore the maximum resolution of a structure determination. We also made two unexpected observations. Single particles that are known to be flexible showed a wider spread in orientation accuracy, and the orientations of the largest particles examined changed by several degrees during typical low-dose exposures. Smaller particles presumably also reorient during the exposure; hence, specimen movement is a second major factor that limits resolution. Tilt pairs thus enable assessment of orientation accuracy, map quality, specimen motion, and conformational heterogeneity. A convincing tilt-pair parameter plot, where 60% of the particles show a single cluster around the expected tilt axis and tilt angle, provides confidence in a structure determined using electron cryomicroscopy.     

A new cryo-EM single-particle ab initio reconstruction method visualizes secondary structure elements in an ATP-fueled AAA+ motor

The generation of ab initio three-dimensional (3D) models is a bottleneck in the studies of large macromolecular assemblies by single-particle cryo-electron microscopy. We describe here a novel method, in which established methods for two-dimensional image processing are combined with newly developed programs for joint rotational 3D alignment of a large number of class averages (RAD) and calculation of 3D volumes from aligned projections (VolRec). We demonstrate the power of the method by reconstructing an ∼ 660-kDa ATP-fueled AAA+ motor to 7.5 Å resolution, with secondary structure elements identified throughout the structure. We propose the method as a generally applicable automated strategy to obtain 3D reconstructions from unstained single particles imaged in vitreous ice.