Effect of Food Status on the Gastrointestinal Transit of Amphotericin B-Containing Solid Lipid Nanoparticles in Rats

Amphotericin B (AmB) is poorly absorbed from the gastrointestinal tract. Recent studies have suggested enhanced drug absorption from solid lipid nanoparticles (SLN). Little is known of the fate of AmB absorption within the gastrointestinal tract, and no gastrointestinal transit study has yet been performed on AmB-containing nano-formulations. We aimed to investigate the effect of food on the gastrointestinal transit properties of an AmB-containing SLN in rats. Three SLNs containing AmB, paracetamol, or sulfasalazine were formulated using cocoa butter and beeswax as lipid matrices and simultaneously administered orally to Sprague-Dawley rats. Paracetamol and sulfapyridine were used as marker drugs for estimating gastric emptying and cecal arrival, respectively. The pharmacokinetic data generated for paracetamol and sulfapyridine were used in estimating the absorption of the AmB SLNs in the small and large intestines, respectively. A delayed rate of AmB absorption was observed in the fed state; however, the extent of absorption was not affected by food. Specifically, the percentages of AmB absorption during the fasted state in the stomach, small intestine, and colon were not significantly different from absorption within the respective regions in the fed state. In both states, however, absorption was highest in the colon and appeared to be a combination of absorption from the small intestine plus absorption proper within the colon. The study suggests that AmB SLN, irrespective of food status, is slowly but predominantly taken up by the lymph, making the small intestine the most favorable site for the delivery of the AmB SLNs.     

A Gastrointestinal Transit Study on Amphotericin B-Loaded Solid Lipid Nanoparticles in Rats

The gastrointestinal (GI) transit behavior of and absorption from an amphotericin B (AmB) solid lipid nanoformulation (SLN) in rats was investigated. We aimed to estimate the gastric emptying time (GET) and cecal arrival time (CAT) of AmB SLN in rats as animal models. From these two parameters, an insight on the absorption window of AmB was ascertained. Three types of SLNs, AmB, paracetamol (PAR), and sulfasalazine (SSZ), were similarly formulated using beeswax/theobroma oil composite as the lipid matrix and characterized with regard to size, viscosity, density, migration propensity within agarose gel, in vitro drug release, morphology, gastrointestinal transit, and in vivo absorption. The GET and CAT were estimated indirectly using marker drugs: PAR and sulfapyridine (SP). All three types of SLNs exhibited identical properties with regard to z-average, viscosity, relative density, and propensity to migrate. PAR was absorbed rapidly from the small intestine following emptying of the SLNs giving the T_50E (time for 50% absorption of PAR) to be 1.6 h. SP was absorbed after release and microbial degradation of SSZ from SLN in the colon with a lag time of 2 h post-administration, serving as the estimated cecal arrival time of the SLNs. AmB within SLN was favorably absorbed from the small intestine, albeit slowly.KEY WORDS: absorption, gastric emptying, marker drugs, paracetamol, sulfasalazine     

Characterization and Evaluation of 5-Fluorouracil-Loaded Solid Lipid Nanoparticles Prepared via a Temperature-Modulated Solidification Technique

The aim of this research was to advance solid lipid nanoparticle (SLN) preparation methodology by preparing glyceryl monostearate (GMS) nanoparticles using a temperature-modulated solidification process. The technique was reproducible and prepared nanoparticles without the need of organic solvents. An anticancer agent, 5-fluorouracil (5-FU), was incorporated in the SLNs. The SLNs were characterized by particle size analysis, zeta potential analysis, differential scanning calorimetry (DSC), infrared spectroscopy, atomic force microscopy (AFM), transmission electron microscopy (TEM), drug encapsulation efficiency, in vitro drug release, and in vitro cell viability studies. Particle size of the SLN dispersion was below 100 nm, and that of redispersed lyophilizates was ~500 nm. DSC and infrared spectroscopy suggested that the degree of crystallinity did not decrease appreciably when compared to GMS. TEM and AFM images showed well-defined spherical to oval particles. The drug encapsulation efficiency was found to be approximately 46%. In vitro drug release studies showed that 80% of the encapsulated drug was released within 1 h. In vitro cell cultures were biocompatible with blank SLNs but demonstrated concentration-dependent changes in cell viability to 5-FU-loaded SLNs. The 5-FU-loaded SLNs can potentially be utilized in an anticancer drug delivery system.KEY WORDS: atomic force microscopy, calorimetry (DSC), FTIR, particle size, solid lipid nanoparticles     

Lyotropic Liquid Crystalline Nanoparticles of Amphotericin B: Implication of Phytantriol and Glyceryl Monooleate on Bioavailability Enhancement

Implication of different dietary specific lipids such as phytantriol (PT) and glyceryl monooleate (GMO) on enhancing the oral bioavailability of amphotericin B (AmB) was examined. Liquid crystalline nanoparticles (LCNPs) were prepared using hydrotrope method, followed by in vitro characterization, Caco-2 cell monolayer uptake, and in vivo pharmacokinetic and toxicity evaluation. Optimized AmB-LCNPs displayed small particle size (<?210 nm) with a narrow distribution (~?0.2), sustained drug release and high gastrointestinal stability, and reduced hemolytic toxicity. PLCNPs presented slower release, i.e., ~?80% as compared to ~?90% release in case of GLCNPs after 120 h. Significantly higher uptake in Caco-2 monolayer substantiated the role of LCNPs in increasing the intestinal permeability followed by increased drug titer in plasma. Pharmacokinetic studies demonstrated potential of PT in enhancing the bioavailability (approximately sixfold) w.r.t. of its native counterpart with reduced nephrotoxicity as presented by reduced nephrotoxicity biomarkers and histology studies. These studies established usefulness of PLCNPs over GLCNPs and plain drug. It can be concluded that acid-resistant lipid, PT, can be utilized efficiently as an alternate lipid for the preparation of LCNPs to enhance bioavailability and to reduce nephrotoxicity of the drug as compared to other frequently used lipid, i.e., GMO.     

Formulation and optimization of solid lipid nanoparticles of buspirone HCl for enhancement of its oral bioavailability

Solid lipid nanoparticles (SLNs) of buspirone HCl as a water-soluble drug were prepared by emulsification-evaporation, followed by the sonification method. A preliminary screening of the most effective parameters on the production of nanoparticles by a Taguchi L₈ orthogonal array showed that the lipid type, surfactant percentage, speed of homogenizer, and acetone:dichloromethane (DCM) ratio had a significant effect on particle size. In the next step, the lipid was fixed on cetyl alcohol, surfactant on Tween 20, lecithin:lipid weight ratio on 20:70, sonication time on 30 seconds, and the other effective, independent factors aforementioned were studied each at three levels by a three-factor, three-level Box-Behnken design. The percentage of drug entrapment, mean particle-size diameter, and zeta potential were studied as the responses. Contour plots were constructed to further elucidate the relationship between the independent and dependent variables. A pharmacokinetic study was conducted in male Wistar rats after oral administration of 15?mg.kg^?1 buspirone in the form of free drug or SLNs. The optimized SLNs had aq particle size of 345.7?nm, loading efficiency of 32.8%, and zeta potential of ?6.8?mV. Buspirone released about 90% during 4.5?hours in vitro. It was found that the relative bioavailability of the drug in SLNs was significantly increased, compared to that of the drug solution.     

Tracing transport of chitosan nanoparticles and molecules in Caco-2 cells by fluorescent labeling

The aim of this study was to explore the transport properties of chitosan nanoparticles and molecules in Caco-2 cells. Fluorescein isothiocyanate-labeled chitosan (f-CS) was synthesized and prepared into nanoparticles (f-CNP). The f-CNP exhibit a mean size of 58.04 nm and a mean charge with +41.63 mV. Cytotoxicities of the f-CNP and the f-CS against Caco-2 cells were disregarded in the transport study. The transport was observed under fluorescence microscope. The f-CNP could be transported into Caco-2 cells across the cell membrane, and showed concentration-dependent and saturable intracellular fluorescence signal at 37 °C. Meanwhile, the energy-dependence of the trans-membrane transport of f-CNP was not observed at 4 °C. The f-CS was mainly accumulated in the cell peripheral and showed a concentration-dependent intercellular fluorescence signal. Thus, formulation of chitosan into nanoparticles significantly improved its trans-membrane transport in Caco-2 cells.     

Formulation and characterization of hydrophilic drug diclofenac sodium-loaded solid lipid nanoparticles based on phospholipid complexes technology

To successfully prepare the diclofenac sodium (DS)-loaded solid lipid nanoparticles (SLNs), phospholipid complexes (PCs) technology was applied here to improve the liposolubility of DS. Solid lipid nanoparticles (SLNs) loaded with phospholipid complexes (PCs) were prepared by the modified emulsion/solvent evaporation method. DS could be solubilized effectively in the organic solvents with the existence of phospholipid and apparent partition coefficient of DS in PCs increased significantly. X-ray diffraction analysis suggested that DS in PCs was either molecularly dispersed or in an amorphous form. However, no significant difference was observed between the Fourier transform infrared spectroscopy (FT-IR) spectra of physical mixture and that of PCs. Particles with small sizes, narrow polydispersity indexes and high entrapment efficiencies could be obtained with the addition of PCs. Furthermore, according to the transmission electron microscopy, a core-shell structure was likely to be formed. The presence of PCs caused the change of zeta potential and retarded the drug release of SLNs, which indicated that phospholipid formed multilayers around the solid lipid core of SLNs. Both FT-IR and differential scanning calorimetry analysis also illustrated that some weak interactions between DS and lipid materials might take place during the preparation of SLNs. In conclusion, the model hydrophilic drug-DS can be formulated into the SLNs with the help of PCs.     

Mechanism of Action of Amphotericin B at the Cellular Level. Its Modulation by Delivery Systems

Abstract

Amphotericin B (AmB) is the drug of choice for the treatment of systemic fungal infections, but its use is hampered by its severe side-effects. A better understanding of its mechanisms of action is needed to develop new AmB formulations with an optimal selectivity between fungal and mammalian cells. Interactions between AmB and cells depend on the concentration of the drug. Stimulatory effects, modulation of the activity of immunocompetent cells and inhibition of yeast adherence are early events that precede the actual cellular toxicity. If membrane permeability alterations are considered to be the first toxic step, cell death results not only from osmotic imbalances, but also from additional mechanisms, such as lipid peroxidation, inhibition of membrane enzymes and blockade of endocytosis. The selectivity between fungal and mammalian cells takes its origin from the difference in the nature of the membrane sterol: ergosterol in fungi, cholesterol in mammalian cells. Transmembrane pores result from different mechanisms according to the sterol: ergosterol-AmB complexes are formed from monomelic AmB in solution, which is the only form present in aqueous medium at low AmB concentrations, whereas pores in the cholesterol containing membrane result from the adsorption onto the membrane surface of aqueous self-associated AmB, that appears in medium when AmB concentration increases. The liposomes seem to sequester AmB in a manner which makes it unavailable for mammalian cells, but maintains its access to fungal cells. The transfer of AmB by progressive diffusion of free AmB through the aqueous phase could explain the enhancement of the therapeutic index of the drug by liposomes, since the induction of pore formation needs a higher threshold of drug for host cell than for fungal cell membranes. The closed structure of the vehicle is not required to enhance the selectivity of the drug: esters of sucrose or high concentration of sodium deoxycholate afford a protective effect as well. Macrophages, after phagocytosis of liposomal AmB, may be considered as a reservoir of AmB, from which the drug is progressively released. Finally, the strong binding of AmB to the delivery system reduces the amount of drug bound to serum components and thus the endocytosis of AmB through the LDL receptor, resulting in lower toxicity.     

Enhancement of oral bioavailability of pentoxifylline by solid lipid nanoparticles

Pentoxifylline (PTX) is a highly water-soluble, hemorheologic drug that undergoes first-pass effect with 20% bioavailability. The solid lipid nanoparticles (SLNs) of PTX were prepared to enhance its oral bioavailability by homogenization, followed by the sonification method. Seven different variables, each at two levels, were studied: lipid type, surfactant type and concentration, speed of homogenizer, acetone:dichloromethane (DCM) ratio, lecithin:lipid ratio, and sonication time. The mean particle size and size distribution, drug entrapment efficiency (EE%), zeta potential, and drug release of the SLNs were investigated. A pharmacokinetic study was conducted in male Wistar rats after oral administration of 10?mg kg^?1 PTX in the form of free drug or SLNs. The z-average particle size, zeta potential, and EE% of the SLNs were at least 250?nm, ?30.2 mV, and 70%, respectively. Among the studied factors, the lipid type, surfactant type, and percentage had a significant effect on the particle size. Zeta potential was more affected by lipid type, acetone:DCM ratio, and sonication time. Speed of homogenizer and acetone:DCM ratio had a significant effect on the EE%. The optimized SLN was prepared by 80?mg of cetyl alcohol, 10?mg of lecithin, acetone:DCM ratio (1:2), 30-second sonication, 3% Tween 20, and a mixing rate of 800?rpm. In vitro drug release lasted for about 5 hours. It was found that the relative bioavailability of PTX in SLNs was significantly increased, compared to that of the PTX solution. SLNs offer a promising approach to improve the oral bioavailability of PTX that is affected by a high first-pass effect.     

Solid lipid nanoparticles for transdermal delivery of avanafil: optimization,formulation, in-vitro and ex-vivo studies

Context: Avanafil (AVA) is used in the treatment of erectile dysfunction, but is reported for its poor aqueous solubility. Solid lipid nanoparticles (SLNs) are lipid carriers that can greatly enhance drug solubility and bioavailability.

Objective: This work was aimed to formulate and optimize AVA SLNs with subsequent loading into hydrogel films for AVA transdermal delivery.

Materials and methods: AVA SLNs were prepared utilizing homogenization followed by ultra-sonication technique. The prepared SLNs were characterized for particle size, charge, surface morphology and drug content. The optimized SLNs formulation was incorporated into transdermal films prepared using HPMC and chitosan. Hydrogel films were evaluated for ex-vivo rat skin permeation using automated Franz diffusion cells. The permeation parameters and the release mechanism were evaluated. The transdermal permeation of the prepared AVA SLNs through the skin layers was studied using confocal laser scanning microscope.

Results: Lipid concentration and % of oil in lipid had a pronounced effect on particle size while, entrapment efficiency was significantly affected by lipid concentration and % of cholesterol. The optimized AVA SLNs showed particle size and entrapment efficiency of 86?nm and 85.01%, respectively. TEM images revealed spherecity of the particles. High permeation parameters were observed from HPMC films loaded with AVA SLNs. The release data were in favor of Higuchi diffusion model. The prepared AVA SLNs were able to penetrate deeper in skin layers.

Conclusion: HPMC transdermal film-loaded AVA SLNs is an effective and alternative to per-oral drug administration.     

Development of Lipid-Based Nanoparticles for Enhancing the Oral Bioavailability of Paclitaxel

The current research work investigates the potential of solid lipid nanoparticles (SLNs) in improving the oral bioavailability of paclitaxel. Paclitaxel-loaded SLNs (PTX-SLNs) were prepared by modified solvent injection method using stearylamine as lipid, soya lecithin and poloxamer 188 as emulsifiers. SLNs were characterized in terms of surface morphology, size and size distribution, surface chemistry and encapsulation efficiency. Pharmacokinetics and bioavailability studies were conducted in male Swiss albino mice after oral administration of PTX-SLNs. SLNs exhibited spherical shape with smooth surface as analyzed by transmission electron microscopy (TEM). The mean particle size of SLNs was 96 ± 4.4 nm with a low polydispersity index of 0.162 ± 0.04 and zeta potential of 39.1 ± 0.8 mV. The drug entrapment efficiency was found to be 75.42 ± 1.5% with a loading capacity of 31.5 ± 2.1% (w/w). Paclitaxel showed a slow and sustained in vitro release profile and followed Higuchi kinetic equations. After oral administration of the PTX-SLNs, drug exposure in plasma and tissues was ten- and twofold higher, respectively, when compared with free paclitaxel solution. PTX-SLNs produced a high mean C _max (10,274 ng/ml) compared with that of free paclitaxel solution (3,087 ng/ml). The absorbed drug was found to be distributed in liver, lungs, kidneys, spleen, and brain. The results suggested that PTX-SLNs dispersed in an aqueous environment are promising novel formulations that enhanced the oral bioavailability of hydrophobic drugs, like paclitaxel and were quite safe for oral delivery of paclitaxel as observed by in vivo toxicity studies.     

Duloxetine HCl Lipid Nanoparticles: Preparation,Characterization, and Dosage Form Design

Solid lipid nanoparticles (SLNs) of duloxetine hydrochloride (DLX) were prepared to circumvent the problems of DLX, which include acid labile nature, high first-pass metabolism, and high-dosing frequency. The DLX-SLNs were prepared by using two different techniques, viz. solvent diffusion method and ultrasound dispersion method, and evaluated for particle size, zeta potential, entrapment efficiency, physical characteristics, and chemical stability. Best results were obtained when SLNs were prepared by ultrasound dispersion method using glyceryl mono stearate as solid lipid and DLX in ratio of 1:20 and mixture of polysorbate 80 and poloxamer 188 as surfactant in concentration of 3%. The mean particle size of formulation and entrapment efficiency was 91.7 nm and 87%, respectively, and had excellent stability in acidic medium. Differential scanning calorimetry and X-ray diffraction data showed complete amorphization of DLX in lipid. In vitro drug release from SLNs was observed for 48 h and was in accordance with Higuchi kinetics. In vivo antidepressant activity was evaluated in mice by forced swim test. DLX-SLNs showed significant enhancement in antidepressant activity at 24 h when administered orally in comparison to drug solution. These results confirm the potential of SLNs in enhancing chemical stability and improving the efficacy of DLX via oral route. The SLN dispersion was converted into solid granules by adsorbing on colloidal silicon dioxide and characterized for particle size after redispersion, morphology, and flow properties. Results indicated that nanoparticles were successfully adsorbed on the carrier and released SLNs when dispersed in water.     

Clinical evaluation of a novel intraoperative handheld gamma camera for sentinel lymph node biopsy

ObjectivePreoperative lymphoscintigraphy (PLS) combined with intraoperative gamma probe (GP) localization is standard procedure for localizing the sentinel lymph nodes (SLN) in melanoma and breast cancer. In this study, we evaluated the ability of a novel intraoperative handheld gamma camera (IHGC) to image SLNs during surgery.MethodsThe IHGC is a small-field-of-view camera optimized for real-time imaging of lymphatic drainage patterns. Unlike conventional cameras, the IHGC can acquire useful images in a few seconds in a free-running fashion and be moved manually around the patient to find a suitable view of the node. Thirty-nine melanoma and eleven breast cancer patients underwent a modified SLN biopsy protocol in which nodes localized with the GP were imaged with the IHGC. The IHGC was also used to localize additional nodes that could not be found with the GP.ResultsThe removal of 104 radioactive SLNs was confirmed ex vivo by GP counting. In vivo, the relative node detection sensitivity was 88.5 (82.3, 94.6)% for the IHGC (used in conjunction with the GP) and 94.2 (89.7, 98.7)% for the GP alone, a difference not found to be statistically significant (McNemar test, p = 0.24).ConclusionSmall radioactive SLNs can be visualized intraoperatively using the IHGC with exposure time of 20 s or less, with no significant difference in node detection sensitivity compared to a GP. The IHGC is a useful complement to the GP, especially for SLNs that are difficult to locate with the GP alone.     

Formation of Two Different Types of Ion Channels by Amphotericin B in Human Erythrocyte Membranes

The polyene antibiotic amphotericin B (AmB) is known to form aqueous pores in lipid membranes and biological membranes. Here, membrane potential and ion permeability measurements were used to demonstrate that AmB can form two types of selective ion channels in human erythrocytes, differing in their interaction with cholesterol. We show that AmB induced a cation efflux (negative membrane polarization) across cholesterol-containing liposomes and erythrocytes at low concentrations (≤1.0 × 10⁻⁶ M), but a sharp reversal of such polarization was observed at concentrations greater than 1.0 × 10⁻⁶ M AmB, an indication that aqueous pores are formed. Cation-selective AmB channels are also formed across sterol-free liposomes, but aqueous pores are only formed at AmB concentrations 10 times greater. The effect of temperature on the AmB-mediated K⁺ efflux across erythrocytes revealed that the energies of activation for channel formation are negative and positive at AmB concentrations that lead predominantly to the formation of cation-selective channels and aqueous pores, respectively. These findings support the conclusion that the two types of AmB channels formed in human erythrocytes differ in their interactions with cholesterol and other membrane components. In effect, a membrane lipid reorganization, as induced by incubation of erythrocytes with tetrathionate, a cross-linking agent of the lipid raft–associated protein spectrin, led to differential changes in the activation parameters for the formation of both types of channels, reflecting the different lipid environments in which such structures are formed.     

Preparation and Optimization of Meropenem-Loaded Solid Lipid Nanoparticles: <Emphasis Type="Italic">In Vitro</Emphasis> Evaluation and Molecular Modeling

Encapsulation of antibiotics into nanocarriers has the potential to overcome resistance and disadvantages associated with conventional dosage forms as well as increase half-life of an antibiotic. Encapsulation of meropenem (MRPN) into solid lipid nanoparticles (SLNs) remains unexplored among the limited work reported on nanoformulation incorporating MRPN. The study aimed to use an experimental design, to optimize MRPN-loaded SLNs, and to undertake in vitro and in silico evaluations. A Box-Behnken design (BBD) was used to optimize manufacturing conditions of glycerol monostearate (GMS) SLNs loaded with MRPN. The SLNs were prepared using hot homogenization and ultrasonication method. Optimized MRPN-SLNs showed particle size, zeta potential, and entrapment efficiency of 112.61?±?0.66 nm, ?20.43?±?0.99 mV, and 89.94?±?1.26%, respectively. The morphology of the SLNs revealed nearly spherical shaped particles. Differential scanning calorimetry and X-ray diffraction analysis showed that meropenem was present in amorphous form in the SLNs. Controlled in vitro MRPN release from SLNs was achieved and followed the Korsmeyer-Peppas model (R ²?=?0.9679). Prolonged in vitro antibacterial activity against Escherichia coli was also observed. The molecular modeling showed that both hydrophobic interactions and hydrogen bonding led to a stable MRPN-GMS complex formation, which was confirmed by its low heat of formation (?5536.13 kcal/mol). This stable complex could have contributed to the controlled release of MRPN from the SLNs and subsequent sustained antibacterial activity.     

Investigations on feasibility of in situ development of amphotericin B liposomes for industrial applications

Amphotericin B (AmB) liposome formulations are very successful in the treatment of fungal infections and leishmaniasis. But higher cost limits its widespread use among people in developing countries. Therefore, we have developed a modified ethanol-injection method for the preparation of AmB liposomes. Two liposomal formulations were developed with dimyristoyl phosphatidylcholine [F-1a] and soya phosphatidylcholine [F-2a], along with egg phosphatidyl glycerol and cholesterol. AmB was dissolved in acidified dimethyl acetamide and mixed with ethanolic lipid solution and rapidly injected in 5% dextrose to prepare liposomes. Liposomes were characterized on the basis of size (~100?nm), zeta (–43.3?±?2.8 mV) and percent entrapment efficiency (>95%). The in vitro release study showed an insignificant difference (P?≥?0.05) for 24-hour release between marketed AmB liposomes (AmBisome) and F-1a and F-2a. Proliposome concentrate, used for the preparation of in situ liposomes, was physically stable for more than 3 months at experimental conditions. Similarly, AmB showed no sign of degradation in reconstituted liposomes stored at 2–8°C for more than 3 months. IC₅₀ value of Ambisome (0.18 µg/mL) was comparatively similar to F-1a (0.17 µg/mL) and F-2a (0.16 µg/mL) against intramacrophagic amastigotes. Under experimental conditions, a novel modified method for AmB liposomes is a great success and generates interest for development as a platform technology for many therapeutic drug products.     

Immunoglobulin G transport increases in an in vitro blood–brain barrier model with amyloid-β and with neuroinflammatory cytokines

Immunotherapies are a promising strategy for the treatment of neurological diseases such as Alzheimer's disease (AD), however, transport of antibodies to the brain is severely restricted by the blood–brain barrier (BBB). Furthermore, molecular transport at the BBB is altered in disease, which may affect the mechanism and quantity of therapeutic antibody transport. To better understand the transport of immunotherapies at the BBB in disease, an in vitro BBB model derived from human induced pluripotent stem cells (iPSCs) was used to investigate the endocytic uptake route of immunoglobulin G (IgG). In this model, uptake of fluorescently labeled IgGs is a saturable process. Inhibition of clathrin-mediated endocytosis, caveolar endocytosis, and macropinocytosis demonstrated that macropinocytosis is a major transport route for IgGs at the BBB. IgG uptake and transport were increased after the addition of stimuli to mimic AD (Aβ_1–40 and Aβ_1–42) and neuroinflammation (tumor necrosis factor-α and interleukin-6). Lastly, caveolar endocytosis increased in the AD model, which may be responsible for the increase in IgG uptake in disease. This study presents an iPSC-derived BBB model that responds to disease stimuli with physiologically relevant changes to molecular transport and can be used to understand fundamental questions about transport mechanisms of immunotherapies in health and neurodegenerative disease.     

Comparing different sterol containing solid lipid nanoparticles for targeted delivery of quercetin in hepatocellular carcinoma

Quercetin (QT) is a potential chemotherapeutic drug with low solubility that seriously limits its clinical use. The aim of this study was enhancing cellular penetration of QT by sterol containing solid lipid nanoparticles (SLNs) which make bilayers fluent for targeting hepatocellular carcinoma cells. Three variables including sterol type (cholesterol, stigmasterol and stigmastanol), drug and sterol content were studied in a surface response D-optimal design for preparation of QT-SLNs by emulsification solvent evaporation method. The studied responses included particle size, zeta potential, drug loading capacity and 24?h release efficiency (RE₂₄%). Scanning electron and atomic force microscopy were used to study the morphology of QT-SLNs and their thermal behavior was studied by DSC analysis. Cytotoxicity of QT-SLNs was determined by MTT assay on HepG-2 cells and cellular uptake by fluorescence microscopy method. Optimized QT-SLNs obtained from cholesterol and QT with the ratio of 2:1 that showed particle size of 78.0?±?7.0?nm, zeta potential of??22.7?±?1.3?mV, drug loading efficiency of 99.9?±?0.5% and RE₂₄ of 56.3?±?3.4%. IC₅₀ of QT in cholesterol SLNs was about six and two times less than free QT and phytosterol SLNs, respectively, and caused more accumulation of QT in HepG2 cells. Blank phytosterol SLNs were toxic on cells.     

Nanoethosomal formulation for skin targeting of amphotericin B: an in vitro and in vivo assessment

Abstract

The present study is envisaged to develop nanoethosomal formulation for enhanced topical delivery of amphotericin B (AmB) for the treatment of cutaneous fungal infections. AmB encapsulated nanoethosomes were prepared using mechanical dispersion method in a strength of 0.1% w/w similar to the strength of marketed topical formulation. Vesicle size of nanoethosomal formulations was found to be in the range of 186?±?2 to 298?±?4?nm. The optimized nanoethosomal formulation was further incorporated in gel base to form AmB nanoethogel formulation. Rheological characterization study of nanoethogel demonstrated its viscoelastic nature with high elasticity and resistance to deformation at 37?°C. The yield stress value was found to be 108.05?±?2.4 and 52.15?±?0.9?Pa for nanoethogel and marketed gel formulation, respectively. The nanoethogel formulation exhibited 2.7- and 3.5-fold higher steady state transdermal flux and skin deposition of AmB, respectively, in comparison to marketed formulation. Confocal laser scanning microscopy (CLSM) study also revealed enhanced skin permeation and deposition with nanoethogel formulation. In vivo study showed that topical application of nanoethogel does not exhibit any skin irritation as tested by Draize test. The developed formulation, in comparison to the marketed gel, demonstrated a remarkable increase in the antifungal activity against Candida albicans. It is thus corroborated from the above results that nanoethosomal formulation represents an efficacious carrier for effective topical delivery of AmB.     

Histopathological indices and inflammatory response in the digestive gland of the mussel Mytilus galloprovincialis as biomarker of immunotoxicity to silver nanoparticles

Background: Histopathological assessments approaches in bivalves have become an important tool in environmental toxicology. This study seeks to develop a quantitative histopathological index (Ih) and inflammation score as biomarkers in the aim to assess the health status of nanoparticles exposed mussels.

Methods: Digestive gland hematoxylin and eosin (H&;E) stained sections from Mytilus galloprovincialis were assessed after in vivo exposure (for 3, 6 and 12?h) to silver nanoparticles (Ag-NPs?Results: Silver nanoparticles clearly induced histopathological alterations in digestive gland (maximum inflammation 2.75 with AgNP?p?Ih with AgNP?p?Ih were recorded after uptake routes were blockade: AgNP?p?Conclusions: Histopathological assessments showed to be promising tool in nanotoxicity which seems to depend on nanoparticles size, exposure time and interestingly to uptake routes. It was not clear: is it the length of exposure or the size of particles is more impactful.