Small multicopy, non-integrative shuttle vectors based on the plasmid pRN1 for Sulfolobus acidocaldarius and Sulfolobus solfataricus, model organisms of the (cren-)archaea

The extreme thermoacidophiles of the genus Sulfolobus are among the best-studied archaea but have lacked small, reliable plasmid vectors, which have proven extremely useful for manipulating and analyzing genes in other microorganisms. Here we report the successful construction of a series of Sulfolobus–Escherichia coli shuttle vectors based on the small multicopy plasmid pRN1 from Sulfolobus islandicus. Selection in suitable uracil auxotrophs is provided through inclusion of pyrEF genes in the plasmid. The shuttle vectors do not integrate into the genome and do not rearrange. The plasmids allow functional overexpression of genes, as could be demonstrated for the β-glycosidase (lacS) gene of S. solfataricus. In addition, we demonstrate that this β-glycosidase gene could function as selectable marker in S. solfataricus. The shuttle plasmids differ in their interruption sites within pRN1 and allowed us to delineate functionally important regions of pRN1. The orf56/orf904 operon appears to be essential for pRN1 replication, in contrast interruption of the highly conserved orf80/plrA gene is tolerated. The new vector system promises to facilitate genetic studies of Sulfolobus and to have biotechnological uses, such as the overexpression or optimization of thermophilic enzymes that are not readily performed in mesophilic hosts.     

Identification of a Replication Protein and Repeats Essential for DNA Replication of the Temperate Lactococcal Bacteriophage TP901-1

DNA replication of the temperate lactococcal bacteriophage TP901-1 was shown to involve the gene product encoded by orf13 and the repeats located within the gene. Sequence analysis of 1,500 bp of the early transcribed region of the phage genome revealed a single-stranded DNA binding protein analogue (ORF12) and the putative replication protein (ORF13). The putative origin of replication was identified as series of repeats within orf13 and was shown to confer a TP901-1 resistance phenotype when present in trans. Site-specific mutations were introduced into the replication protein and into the repeats. The mutations were introduced into the TP901-1 prophage by homologous recombination by using a vector with a temperature-sensitive replicon. Subsequent analysis of induced phages showed that the protein encoded by orf13 and the repeats within orf13 were essential for phage TP901-1 amplification. In addition, analyses of internal phage DNA replication showed that the ORF13 protein and the repeats are essential for phage TP901-1 DNA replication in vivo. These results show that orf13 encodes a replication protein and that the repeats within the gene are the origin of replication.     

Isolation and characterization of a new plasmid pSpnP1 from a multidrug-resistant clone of Streptococcus pneumoniae

A novel Streptococcus pneumoniae plasmid (pSpnP1; 5413bp) has been isolated from the multidrug-resistant clone Poland(23F)-16, and its complete nucleotide sequence has been determined. Sequence analysis predicted seven co-directional open reading frames and comparative analyses revealed that plasmid pSpnP1 is different to pDP1, the only previously described pneumococcal plasmid, whereas it is highly similar to pSt08, a plasmid from Streptococcus thermophilus. A double-stranded origin for replication similar to the replication origin of the pC194/pUB110 family was located upstream of the putative rep gene (orf2). It also contained a 144-bp region with over 60% identity to the single-stranded origin type A of the Streptococcus agalactiae plasmid pMV158/pLS1. Detection of single-stranded DNA by Southern blot analysis indicated that pSpnP1 replicates via a rolling circle mechanism. Interestingly, the product of orf1 has a putative Zonular occludens toxin conserved domain present in toxigenic strains of Vibrio cholerae. Real-time PCR assays revealed that this ORF was expressed. Hybridization experiments showed that the pSpnP1 replicon was unusual among other examined antibiotic-resistant pneumococcal clones, although the recombinant plasmids based on pSpnP1 were able to replicate in Bacillus subtilis and Lactococcus lactis.     

Removal of symmetrical sequences from the origin region of plasmid R1 reduces its replication efficiency

The R1 origin region contains many symmetrical DNA sequence elements which allow the formation of complex secondary structures. A 218-bp in vivo deletion in a cloned R1 origin fragment removes most of them. As this deletion was never observed in plasmids containing all R1 replication functions, it was introduced by BglI in vitro recombination into the `basic replicon' of R1 cloned into pBR322. The recombinant plasmid with the 218-bp deletion and its derivatives unambiguously show that the deleted symmetrical elements are not absolutely essential for R1 replication as was previously assumed though they seem to determine a more efficient origin function. Likewise, a hypothetical protein of a mol. wt. of 14 000 daltons, the major part of which would be encoded by the deleted sequences, does not seem to be of particular importance for R1-specific replication. This is the first report of an alteration in the origin region of an IncFII plasmid which affects plasmid replication without abolishing it completely.     

Sequence Analysis and Molecular Characterization of the Lactococcus lactis Temperate Bacteriophage BK5-T

The Lactococcus lactis temperate bacteriophage BK5-T is one of twelve type phages that define L. lactis phage species. This paper describes the nucleotide sequence and analysis of a 21-kbp region of the BK5-T genome and completes the nucleotide sequence of the genome of this phage. The 40,003-nucleotide linear genome encodes 63 open reading frames. Sequence runoff experiments showed that the cohesive ends of the BK5-T genome contained a 12-bp 3′ single-stranded overhang with the sequence 5′-CACACACATAGG-3′. Two major BK5-T structural proteins, of approximately 30 and 20 kDa, were identified, and N-terminal sequence analysis determined that they were encoded by orf7 and orf12, respectively. A 169-bp fragment containing a 37-bp direct repeat and several smaller repeat sequences conferred resistance to BK5-T infection when introduced in trans to the host cell and is likely a part of the BK5-T origin of replication (ori).     

DNA translocation activity of the multifunctional replication protein ORF904 from the archaeal plasmid pRN1

The replication protein ORF904 from the plasmid pRN1 is a multifunctional enzyme with ATPase-, primase- and DNA polymerase activity. Sequence analysis suggests the presence of at least two conserved domains: an N-terminal prim/pol domain with primase and DNA polymerase activities and a C-terminal superfamily 3 helicase domain with a strong double-stranded DNA dependant ATPase activity. The exact molecular function of the helicase domain in the process of plasmid replication remains unclear. Potentially this motor protein is involved in duplex remodelling and/or origin opening at the plasmid replication origin. In support of this we found that the monomeric replication protein ORF904 forms a hexameric ring in the presence of DNA. It is able to translocate along single-stranded DNA in 3′–5′ direction as well as on double-stranded DNA. Critical residues important for ATPase activity and DNA translocation activity were identified and are in agreement with a homology model of the helicase domain. In addition we propose that a winged helix DNA-binding domain at the C-terminus of the helicase domain could assist the binding of the replication protein specifically to the replication origin.     

Identification of a replication protein and repeats essential for DNA replication of the temperate lactococcal bacteriophage TP901-1

DNA replication of the temperate lactococcal bacteriophage TP901-1 was shown to involve the gene product encoded by orf13 and the repeats located within the gene. Sequence analysis of 1,500 bp of the early transcribed region of the phage genome revealed a single-stranded DNA binding protein analogue (ORF12) and the putative replication protein (ORF13). The putative origin of replication was identified as series of repeats within orf13 and was shown to confer a TP901-1 resistance phenotype when present in trans. Site-specific mutations were introduced into the replication protein and into the repeats. The mutations were introduced into the TP901-1 prophage by homologous recombination by using a vector with a temperature-sensitive replicon. Subsequent analysis of induced phages showed that the protein encoded by orf13 and the repeats within orf13 were essential for phage TP901-1 amplification. In addition, analyses of internal phage DNA replication showed that the ORF13 protein and the repeats are essential for phage TP901-1 DNA replication in vivo. These results show that orf13 encodes a replication protein and that the repeats within the gene are the origin of replication.     

Complete Sequence of the Enterocin Q-Encoding Plasmid pCIZ2 from the Multiple Bacteriocin Producer Enterococcus faecium L50 and Genetic Characterization of Enterocin Q Production and Immunity

The locations of the genetic determinants for enterocin L50 (EntL50A and EntL50B), enterocin Q (EntQ), and enterocin P (EntP) in the multiple bacteriocin producer Enterococcus faecium strain L50 were determined. These bacteriocin genes occur at different locations; entL50AB (encoding EntL50A and EntL50B) are on the 50-kb plasmid pCIZ1, entqA (encoding EntQ) is on the 7.4-kb plasmid pCIZ2, and entP (encoding EntP) is on the chromosome. The complete nucleotide sequence of pCIZ2 was determined to be 7,383 bp long and contains 10 putative open reading frames (ORFs) organized in three distinct regions. The first region contains three ORFs: entqA preceded by two divergently oriented genes, entqB and entqC. EntqB shows high levels of similarity to bacterial ATP-binding cassette (ABC) transporters, while EntqC displays no significant similarity to any known protein. The second region encompasses four ORFs (orf4 to orf7), and ORF4 and ORF5 display high levels of similarity to mobilization proteins from E. faecium and Enterococcus faecalis. In addition, features resembling a transfer origin region (oriT) were found in the promoter area of orf4. The third region contains three ORFs (orf8 to orf10), and ORF8 and ORF9 exhibit similarity to the replication initiator protein RepE from E. faecalis and to RepB proteins, respectively. To clarify the minimum requirement for EntQ synthesis, we subcloned and heterologously expressed a 2,371-bp fragment from pCIZ2 that encompasses only the entqA, entqB, and entqC genes in Lactobacillus sakei, and we demonstrated that this fragment is sufficient for EntQ production. Moreover, we also obtained experimental results indicating that EntqB is involved in ABC transporter-mediated EntQ secretion, while EntqC confers immunity to this bacteriocin.     

Characterization of a Theta-Type Plasmid from Lactobacillus sakei: a Potential Basis for Low-Copy-Number Vectors in Lactobacilli

The complete nucleotide sequence of the 13-kb plasmid pRV500, isolated from Lactobacillus sakei RV332, was determined. Sequence analysis enabled the identification of genes coding for a putative type I restriction-modification system, two genes coding for putative recombinases of the integrase family, and a region likely involved in replication. The structural features of this region, comprising a putative ori segment containing 11- and 22-bp repeats and a repA gene coding for a putative initiator protein, indicated that pRV500 belongs to the pUCL287 subfamily of theta-type replicons. A 3.7-kb fragment encompassing this region was fused to an Escherichia coli replicon to produce the shuttle vector pRV566 and was observed to be functional in L. sakei for plasmid replication. The L. sakei replicon alone could not support replication in E. coli. Plasmid pRV500 and its derivative pRV566 were determined to be at very low copy numbers in L. sakei. pRV566 was maintained at a reasonable rate over 20 generations in several lactobacilli, such as Lactobacillus curvatus, Lactobacillus casei, and Lactobacillus plantarum, in addition to L. sakei, making it an interesting basis for developing vectors. Sequence relationships with other plasmids are described and discussed.     

Influence of Different Functional Elements of Plasmid pGT232 on Maintenance of Recombinant Plasmids in Lactobacillus reuteri Populations In Vitro and In Vivo

Plasmid pGT232 (5.1 kb), an indigenous plasmid of Lactobacillus reuteri 100-23, was determined, on the basis of nucleotide and deduced protein sequence data, to belong to the pC194-pUB110 family of plasmids that replicate via the rolling-circle mechanism. The minimal replicon of pGT232 was located on a 1.7-kb sequence consisting of a double-strand origin of replication and a gene encoding the replication initiation protein, repA. An erythromycin-selectable recombinant plasmid containing this minimal replicon was stably maintained (>97% erythromycin-resistant cells) without antibiotic selection in an L. reuteri population under laboratory growth conditions but was poorly maintained (<33% resistant cells) in the L. reuteri population inhabiting the murine gastrointestinal tract. Stable maintenance (>90% resistant cells) of pGT232-derived plasmids in the lactobacillus population in vivo required an additional 1.0-kb sequence which contained a putative single-strand replication origin (SSO). The SSO of pGT232 is believed to be novel and functions in an orientation-specific manner.     

Rep*: a Viral Element That Can Partially Replace the Origin of Plasmid DNA Synthesis of Epstein-Barr Virus

Replication of the Epstein-Barr viral (EBV) genome occurs once per cell cycle during latent infection. Similarly, plasmids containing EBV’s plasmid origin of replication, oriP, are replicated once per cell cycle. Replication from oriP requires EBV nuclear antigen 1 (EBNA-1) in trans; however, its contributions to this replication are unknown. oriP contains 24 EBNA-1 binding sites; 20 are located within the family of repeats, and 4 are found within the dyad symmetry element. The site of initiation of DNA replication within oriP is at or near the dyad symmetry element. We have identified a plasmid that contains the family of repeats but lacks the dyad symmetry element whose replication can be detected for a limited number of cell cycles. The detection of short-term replication of this plasmid requires EBNA-1 and can be inhibited by a dominant-negative inhibitor of EBNA-1. We have identified two regions within this plasmid which can independently contribute to this replication in the absence of the dyad symmetry element of oriP. One region contains native EBV sequences within the BamHI C fragment of the B95-8 genome of EBV; the other contains sequences within the simian virus 40 genome. We have mapped the region contributing to replication within the EBV sequences to a 298-bp fragment, Rep*. Plasmids which contain three copies of Rep* plus the family of repeats support replication more efficiently than those with one copy, consistent with a stochastic model for the initiation of DNA synthesis. Plasmids with three copies of Rep* also support long-term replication in the presence of EBNA-1. These observations together indicate that the latent origin of replication of EBV is more complex than formerly appreciated; it is a multicomponent origin of which the dyad symmetry element is one efficient component. The experimental approach described here could be used to identify eukaryotic sequences which mediate DNA synthesis, albeit inefficiently.     

Cloning and molecular characterization of a novel rolling-circle replicating plasmid, pK1S-1, from Bacillus thuringiensis subsp. kurstaki K1

Bacillus thuringiensis, an entomopathogenic bacterium belonging to the B. cereus group, harbors numerous extra-chromosomal DNA molecules whose sizes range from 2 to 250 kb. In this study, we used a plasmid capture system (PCS) to clone three small plasmids from B. thuringiensis subsp. kurstaki Kl which were not found in B. thuringiensis subsp. kurstaki HD-1, and determined the complete nucleotide sequence of plasmid pKlS-1 (5.5 kb). Of the six putative open reading frames (ORF2-ORF7) in pKlS-1, ORF2 (MobKl) showed approximately 90% aa identity with the Mob-proteins of pGI2 and pTX14-2, which are rolling circle replicating group VII (RCR group VII) plasmids from B. thuringiensis. In addition, a putative origin of transfer (oriT) showed 95.8% identity with those of pGI2 and pTX14-2. ORF3 (RepK1) showed relatively low aa identity (17.8～25.2%) with the Rep protein coded by RCR plasmids, however. The putative double-strand origin of replication (dso) and single-strand origin of replication (sso) of pKlS-1 exhibited approximately 70% and 64% identities with those of pGI2 and pTX14-2. ORF6 and 7 showed greater than 50% similarities with alkaline serine protease, which belongs to the subtilase family. The other 2 ORFs were identified as hypothetical proteins. To determine the replicon of pKlS-1, seven subclones were contructed in the B. thuringiensis ori-negative pHTIK vector and were electroporated into a plasmid cured B. thuringiensis strain. The 1.6 kb region that included the putative ORF3 (ReplK), dso and ORF4, exhibited replication ability. These findings identified pKlS-1 as a new RCR group VII plasmid, and determined its replication region.     

Isolation and Characterization of a Rolling-Circle-Type Plasmid from Rhodococcus erythropolis and Application of the Plasmid to Multiple-Recombinant-Protein Expression

We isolated, sequenced, and characterized the cryptic plasmid pRE8424 from Rhodococcus erythropolis DSM8424. Plasmid pRE8424 is a 5,987-bp circular plasmid; it carries six open reading frames and also contains cis-acting elements, specifically a single-stranded origin and a double-stranded origin, which are characteristic of rolling-circle-replication plasmids. Experiments with pRE8424 derivatives carrying a mutated single-stranded origin sequence showed that single-stranded DNA intermediates accumulated in the cells because of inefficient conversion from single-stranded DNA to double-stranded DNA. This result indicates that pRE8424 belongs to the pIJ101/pJV1 family of rolling-circle-replication plasmids. Expression vectors that are functional in several Rhodococcus species were constructed by use of the replication origin from pRE8424. We previously reported a cryptic plasmid, pRE2895, from R. erythropolis, which may replicate by a θ-type mechanism, like ColE2 plasmids. The new expression vectors originating from pRE8424 were compatible with those derived from pRE2895. Coexpression experiments with these compatible expression vectors indicated that the plasmids are suitable for the simultaneous expression of multiple recombinant proteins.     

Small cryptic plasmids of Streptococcus pneumoniae belong to the pC194/pUB110 family of rolling circle plasmids

The DNA sequences of two related plasmids pPR1 and pPR3 described previously in Streptococcus pneumoniae isolates from Germany and Spain were now determined. Both plasmids belong to a family of rolling circle (RC) plasmids found in a variety of bacteria. Their GC content with 32% is lower than that of the S. pneumoniae chromosomal DNA. The plasmid pPR3 has a molecular size of 3160 bp with four putative open reading frames, whereas pPR1 contained a deletion of 313 bp that included the 5′-part of ORF2 and upstream regions and differed by three bp from pPR3. The predicted protein of ORF1 showed high similarity to replication proteins of RC plasmids with 74% identical amino acids to RepA of Streptococcus thermophilus plasmids. Sequences similar to the plus origin of replication of ssDNA plasmids were present in both plasmids. They also contained a 152-bp region with over 83% identity to the minus origin of replication of the Streptococcus agalacticae plasmid pMV158.     

Characterization of a rolling-circle replication plasmid from Thermus aquaticus NTU103

The thermophilic bacterium Thermus aquaticus NTU103 harbors a 1,965-bp plasmid, pTA103. Sequencing analysis revealed that pTA103 contains two open reading frames. One of the open reading frames (orf2) shares no significant homology with protein in the data bank. The other one has 50% similarity and 34% identity with RepA-like protein of pRm1132f, which is a rolling-circle replication (RCR) plasmid isolated from Sinorhizobium meliloti. S1 nuclease analysis demonstrated that pTA103 contains a single-stranded intermediate, confirming that pTA103 replicates via RCR mechanism. Sequence data also revealed putative double-stranded origin and single-stranded origin sites, indicating the importance of these cis elements in pTA103 replication.     

Poly(ADP-ribose) Polymerase-1 (PARP-1) Contributes to the Barrier Function of a Vertebrate Chromatin Insulator

The prototypic chromatin insulator cHS4 has proven effective in reducing silencing chromosomal position effects in a variety of settings. Most of this barrier insulator activity has been mapped to a 250-bp core region, as well as to several proteins that bind this region. However, recent studies from our laboratory demonstrated that an extended 400-bp core region of the cHS4 element is necessary to achieve full barrier insulator activity when used as a single copy in the context of recombinant gammaretroviral and lentiviral vectors. In this study, electrophoretic gel mobility shift assays revealed specific DNA-protein binding activities associated with the distal portion of this extended core region. Affinity purification and tandem mass spectrometry studies led to the identification of one of these proteins as poly(ADP-ribose) polymerase-1 (PARP-1). The identity of this binding activity as PARP-1 was subsequently verified by a variety of biochemical studies in vitro and by chromatin immunoprecipitation studies in vivo. Functional studies with gammaretroviral reporter vectors in cell lines and primary mouse bone marrow progenitor cultures showed that cHS4 barrier activity was abrogated upon mutation of the putative PARP-1-binding site or upon treatment with a PARP inhibitor, respectively. The barrier activity of the cHS4 element was also found to be abrogated in studies using bone marrow from Parp1-null mice. Taken together, this study demonstrates that binding of PARP-1 plays a key functional role in the barrier activity of the extended cHS4 insulator core element.