In Situ Hybridization: Use of S-Labeled Probes on Paraffin Tissue Sections

The following protocol is for radioactive in situ hybridization detection of RNA using paraffin-embedded tissue sections on glass microscope slides. Steps taken to inhibit RNase activity such as diethyl pyrocarbonate (DEPC) treatment of solutions and baked glassware are unnecessary. The tissue is fixed using 4% paraformaldehyde, hybridized with ³⁵S-labeled RNA probes, and exposed to nuclear-track emulsion. The entire procedure takes 2–3 days prior to autoradiography. The time required for autoradiography is variable with an average time of 10 days. Parameters that affect the length of the autoradiography include: (1) number of copies of mRNA in the tissue, (2) incorporation of label into the probe, and (3) amount of background signal. Additional steps involved in the autoradiography process, including development of the emulsion, cleaning of the microscope slides, counterstaining of the tissue, and mounting coverslips on the microscope slides, are discussed. In addition, a general guide to the interpretation of the in situ results is provided.     

An efficient in situ hybridization protocol for multiple tissue sections and probes on miniaturized slides

To facilitate detection of gene activity in tissue sections we combined common protocols of in situ hybridization on tissue sections (TSISH) with the technique of whole-mount in situ hybridization (WMISH). Miniature glass slides for mounting tissue sections were cut from regular microscope slides and handled for in situ hybridization in laboratory-made 2-ml containers (baskets) similar to those originally used for WMISH on Drosophila embryos. A salient point of the method is the use of airtight reaction vessels placed in a dry thermostat for critical hybridization steps as this facilitates reproducible and stringent hybridization conditions which are difficult to achieve on tissue sections otherwise. The practicability of the method is illustrated on consecutive serial frozen sections of murine neonatal cerebellum hybridized for math1 and neuroD, two developmentally regulated genes with distinct expression patterns. For both genes excellent spatial resolution and a highly dynamic range of signal intensity was obtained. The approach enables simple processing of multiple probes, allows the efficient and economic use of small tissue samples and is amenable to automation.     

Ultrastructural in situ hybridization: A review of technical aspects

Detection of nucleic acid sequence at the ultrastructural level has allowed us to better understand the expression of genes in some fields of application in cell biology. In situ hybridization at the ultrastructural level can be carried out using three different methods: on vibratome sections before embedding in epoxy resin, on ultrathin frozen section, or on ultrathin section of tissue embedded in hydrophilic resin such as Lowicryl. Before starting the detection of nucleic acid sequences at the electron microscope level, the experimenter has to choose various parameters: the type of tissue fixation, the probe and its label, and the in situ hybridization method, depending on the sensitivity, the resolution and the ultrastructural preservation required. This review of technical aspects, by describing the different methods of ultrastructural in situ hybridization, will help the experimenter to optimize each step of the hybridization procedure.     

Detection of mRNA and hnRNA using a digoxigenin labelled cDNA probe byin situ hybridization on frozen tissue sections

Summary A full-length cDNA clone encoding the constant region of T cell receptor chain was labelled by random priming DNA with digoxigenin-dUTP. The probe was used to estimate the relative amount of the receptor chain mRNA byin situ hybridization on frozen sections from human thymus and lymph nodes. The hybridization was visualized in blue using an anti-digoxigenin antibody conjugated with alkaline phosphatase and a subsequent enzyme-catalysed colour reaction. The distributions of the signal in tissue sections were as expected. Moreover, labelled cells showed hybrids both in the cytoplasm and in the nucleus, and strongly and weakly stained cells were clearly distinguishable. The results indicate that this method ofin situ hybridization should be useful in the detection of specific mRNA in frozen sections.     

Autoradiography of Water-Diffusible Substances in Sections of Whole Baby Rats

Rats, 7 days postnatal which had been injected with a radioactive nuclide, were quick frozen and sectioned in the frozen state. An adhesive cellulose tape (Sellotape) was used to support the section during cutting, through freeze-drying, and attaching to slides. Dehydration of the frozen sections consisted of 1 hr in a chilled desiccator containing silica gel, then at reduced pressure of 2-3 mm Hg until quite dry. The exposed side of the section was sprayed with celloidin dissolved in amyl acetate and allowed to dry. This side of the section was attached to a slide, previously coated with 1% gelatin containing 0.1% chrome alum, by means of an adhesive consisting of 4% gelatin and 5% formalin in 60% glycerol. In applying this adhesive it is mandatory that a border of about 3 mm of bare glass be left outside the adhesive, to allow intimate contact between the sticky side of the tape and the glass. The adhesive was allowed to set for 20 min, the slide immersed in water lor 50 sec, and the cellulose layer of the tape peeled off. The rubber base from the tape was removed with chloroform, the slide dried, and the exposed surface of the section coated with celloidin in amyl acetate, by dipping. After this treatment, the slides could be coated by dipping in autoradiographic emulsion without affecting water-soluble radioactive substances in the tissue.     

Three color cDNA microarrays: quantitative assessment through the use of fluorescein-labeled probes

Gene expression studies using microarrays have great potential to generate new insights into human disease pathogenesis, but data quality remains a major obstacle. In particular, there does not exist a method to determine prior to hybridization whether an array will yield high quality data, given good study design and target preparation. We have solved this problem through development of a three-color cDNA microarray platform where printed probes are fluorescein labeled, but are spectrally compatible with Cy3 and Cy5 dye-labeled targets when using confocal laser scanners possessing narrow bandwidths. This approach enables prehybridization evaluation of array/spot morphology, DNA deposition and retention and background levels. By using these measurements and the intra-slide coefficient of variation for fluorescence intensity we show that slides in the same batch are not equivalent and measurable prehybridization parameters can be predictive of hybridization performance as determined by replicate consistency. When hybridizing target derived from two cell lines to high and low quality replicate pairs (n = 50 pairs), a direct and significant relationship between prehybridization signal-to-background noise and post-hybridization reproducibility (R² = 0.80, P < 0.001) was observed. We therefore conclude that slide selection based upon prehybridization quality scores will greatly benefit the ability to generate reliable gene expression data.     

In situ hybridization using PEG-embedded tissue and riboprobes: increased cellular detail coupled with high sensitivity

We describe a procedure for preparing tissue sections by embedding in polyethylene glycol for subsequent in situ hybridization analysis using single-stranded RNA probes. Improved tissue morphology is obtained as compared to frozen sections, and the embedding procedure is milder and faster than paraffin embedding. Sections as thin as 2 microns are readily cut from PEG-embedded brain tissue. A simplified hybridization protocol (Clayton et al.: Neuron 1:249, 1988) supports the detection of even low-abundance brain mRNAs (less than or equal to 10(-4) fractional mRNA mass). By employing high stringency washes in place of ribonuclease treatment after hybridization, cell RNA is retained for cresyl violet staining, and high signal:noise ratios are achieved. Solutions to problems with section mounting and adherence to glass slides are presented. The combination of improved morphology, high signal levels, and relative simplicity should make this procedure useful in a variety of applications.     

Thin sectioning of slice preparations for immunohistochemistry

Many investigations in neuroscience, as well as other disciplines, involve studying small, yet macroscopic pieces or sections of tissue that have been preserved, freshly removed, or excised but kept viable, as in slice preparations of brain tissue. Subsequent microscopic studies of this material can be challenging, as the tissue samples may be difficult to handle. Demonstrated here is a method for obtaining thin cryostat sections of tissue with a thickness that may range from 0.2-5.0 mm. We routinely cut 400 micron thick Vibratome brain slices serially into 5-10 micron coronal cryostat sections. The slices are typically first used for electrophysiology experiments and then require microscopic analysis of the cytoarchitecture of the region from which the recordings were observed. We have constructed a simple device that allows controlled and reproducible preparation and positioning of the tissue slice. This device consists of a cylinder 5 cm in length with a diameter of 1.2 cm, which serves as a freezing stage for the slice. A ring snugly slides over the cylinder providing walls around the slice allowing the tissue to be immersed in freezing compound (e.g., OCT). This is then quickly frozen with crushed dry ice and the resulting wafer can be position easily for cryostat sectioning. Thin sections can be thaw-mounted onto coated slides to allow further studies to be performed, such as various staining methods, in situ hybridization, or immunohistochemistry, as demonstrated here.     

An Activated GOPS‐poly‐L‐Lysine‐ Coated Glass Surface for the Immobilization of 60mer Oligonucleotides

To explore a method for enhancing the immobilization and hybridization efficiency of oligonucleotides on DNA microarrays, conventional protocols of poly‐L‐lysine coating were modified by means of surface chemistry, namely, the slides were prepared by the covalently coupling of poly‐L‐lysine to a glycidoxy‐modified glass surface. The modified slides were then used to print microarrays for the detection of the SARS coronavirus by means of 60mer oligonucleotide probes. The characteristics of the modified slides concerning immobilization efficiency, hybridization dynamics, and probe stripping cycles were determined. The improved surface exhibited high immobilization efficiency, a good quality uniformity, and satisfactory hybridization dynamics. The spotting concentration of 10 μmol/L can meet the requirements of detection; the spots were approximately 170 nm in diameter; the mean fluorescence intensity of the SARS spots were between 3.2 × 10⁴ and 5.0 × 10⁴ after hybridization. Furthermore, the microarrays prepared by this method demonstrated more resistance to consecutive probe stripping cycles. The activated GOPS‐PLL slide could undergo hybridization stripping cycles for at least three cycles, and the highest loss in fluorescence intensity was found to be only 11.9 % after the third hybridization. The modified slides using the above‐mentioned method were superior to those slides treated with conventional approaches, which theoretically agrees with the fact that modification by surface chemistry attaches the DNA covalently firmly to the slides. This protocol may have great promise in the future for application in large‐scale manufacture.     

New tissue microarray technology for analyses of gene expression in frozen pathological samples

Tissue microarrays (TMAs) are widely used to analyze gene expression in multiple pathological samples on a single slide. Currently, most TMA slides are made by coring paraffin-embedded tissues and arraying them into a paraffin block, from which TMA sections are cut. However paraffin-based TMA technology may not be compatible with frozen clinical tissue samples, which have a higher quality of RNAs and proteins for preparing TMAs than paraffin-embedded tissue samples. In this study, we developed an alternative TMA technology that is applicable to a broader range of frozen tissue samples. Our method takes advantage of a newly developed array recipient block that can be used to array small tissue cores. After arraying tissue cores, the tissue block can be immediately sectioned on a cryostat microtome to make TMA slides. TMAs made using this method have well-defined array configurations and good tissue/cell morphology. Immunohistochemistry and in situ hybridization study also revealed well-preserved proteins and mRNAs on TMA slides. Our method significantly simplifies TMA preparation and assembly when frozen pathological tissues are used. Our technology provides an alternative tool for creating high-quality TMAs for the general research community to study gene expressions in pathological samples.     

The discrimination of high-risk HPV types by in situ hybridization and the polymerase chain reaction

Summary The parameter Tm^t has been defined by non-isotopic in situ hybridization and describes the tissue melting temperature (Tm^t) of human papillomavirus (HPV) DNA sequences. In this study, multiple in situ hybridization signals for HPV types 16, 31 and 33 in individual archival biopsies hybridized with genomic probes are shown by polymerase chain reactions to be due to cross-hybridization of probe sequences to a single tissue target. Tm^t is independent of viral type but depends on the homology between probe and target when using nick-translated whole genomic probes. The difference between Tm and Tm^t is not due to the presence of viral capsid protein. Multiple HPV signals in archival material should not therefore be interpreted as indicative of multiple HPV infection unless adequate stringency conditions have been employed or they are present in morphologically distinct areas of the biopsy.Furthermore, extrapolation of calculated DNA homologies to non-isotopic in situ hybridization analysis may not be appropriate. A hybridization signal does not imply probe and target identity: this has implications for HPV typing in clinical material.     

Detection of human papillomavirus DNA in genital lesions by enzymatic in situ hybridization with Fast Red and laser scanning confocal microscopy

Human papillomavirus (HPV) infection with potentially oncogenic types 16 or 18 is common in genital lesions especially in uterine carcinomas. In such lesions, in situ hybridization with non-radioactive probes is a powerful tool for the histopathologist to detect and type HPV DNA either on cell deposits or on tissue sections. The use of an immunohistochemical method involving alkaline phosphatase and Fast Red TR salt/naphthol AS-MX phosphate is proposed for use with conventional bright-field or fluorescence microscopy as well as by laser scanning confocal microscopy. The alkaline phosphatase-Fast Red reaction has the advantage of producing a red precipitate that permits the detection of in situ hybridization signals by bright-field microscopy, and of obtaining a strong red fluorescence characterized by a lack of bleaching when excited by a green light. Therefore, the alkaline phosphatase-Fast Red reaction is well adapted for observations by fluorescence and confocal microscopy, the latter method allowing the detection, in tissue sections of cervical intraepithelial lesions, of small punctate and large diffuse hybridization signals, considered as integrated and episomal states of HPV DNA respectively. The combination of in situ hybridization with the alkaline phosphatase-Fast Red reaction and confocal microscopy is particularly convincing when hybridization signals are of small size and/or of low fluorescence intensity, especially if they are present in various focal planes; in such conditions, infected cells are easily detected by three-dimensional reconstruction. Therefore, this combination is a suitable method for identifying and characterizing HPV DNA in cells and tissue sections This revised version was published online in November 2006 with corrections to the Cover Date.     

Regional differences in expression of VEGF mRNA in rat gastrocnemius following 1 hr exercise or electrical stimulation

Background  

Vascular endothelial growth factor (VEGF) mRNA levels increase in rat skeletal muscle after a single bout of acute exercise. We assessed regional differences in VEGF₁₆₅ mRNA levels in rat gastrocnemius muscle using in situ hybridization after inducing upregulation of VEGF by treadmill running (1 hr) or electrical stimulation (1 hr). Muscle functional regions were defined as oxidative (primarily oxidative fibers, I and IIa), or glycolytic (entirely IIb or IId/x fibers). Functional regions were visualized on muscle cross sections that were matched in series to slides processed through in situ hybridization with a VEGF₁₆₅ probe. A greater upregulation in oxidative regions was hypothesized.     

Vacuum Freeze Drying of Frozen Sections for Dry-Mounting, High-Resolution Autoradiography

Specimens no larger than 1.5 × 1.5 × 2 mm were frozen in liquid nitrogen and sectioned, while still frozen, with a refrigerated microtome. The frozen sections were dried in a vacuum, then pressed onto either Kodak NTB10 plates or onto slides which had been coated with Kodak NTB3 emulsion and dried. Radioactive mouse liver was used to test tissue preservation. Intestinal mucosa with Ha-labeled nuclei was used to test the quality of autoradiography. Good cytological detail was preserved in both tissues, with the autoradiographs interpretable at the cellular level.