Fed-batch cultivation of Pseudomonas cepacia with on-line control of the toxic substrate salicylate

Pseudomonas cepacia was cultivated on salicylate as sole carbon and energy source in a fed-batch culture. On-line measurement of salicylate concentration was carried out using a filtration system. Cell-free permeate was passed through a flow-through spectrophotometer. Measurements were carried out at 325 nm. A Proportional-Integral controller was used for regulating the feed rate around a basic dosage scheme to maintain a constant salicylate concentration of 0.2 g/l in the broth. The cell mass concentration increased from less than 1 g dry weight (dw)/l to 12 g dw/l in less than 6 h, and the yield coefficient was 0.4 g dw/g salicylate. The intracellular enzymatic activity of salicylate hydroxylase was virtually unchanged during the fed-batch cultivation. Correspondence to: A. Tocaj     

A study of polynucleotide phosphorylase production by <Emphasis Type="Italic">Escherichia coli</Emphasis> in a hollow fibre reactor

A 30-l hollow fibre reactor with continuous fermentation for cell recycling of Escherichia coli AS 1.183 was used to remove the inhibitory effects on cell growth and extend the fast growth phase to increase the yield of polynucleotide phosphorylase (PNPase) in E. coli cells. When the dilution rate was 1.5 h⁻¹, the cell concentration of E. coli reached 235 g/l (wet wt, 70% moisture content), with PNPase activity above 90 u/g (wet wt). With the dilution rate is 1.0 h⁻¹, the fermentor volumetric productivity of PNPase in a hollow fiber reactor can reach 974 (u/h * l) compared to 20 (u/h * l) in a conventional batch culture.     

Production of acetic acid by a repeated batch culture with cell recycle ofAcetobacter aceti

Summary A comparison of volumetric production rates of acetic acid inAcetobacter aceti M23 was conducted for repeated batch (RB), cell-recycling repeated batch (CRB) and continuous (C) cultures. Best result was obtained with CRB culture. The magnification of productivity was 1.7 (to RB culture) and 3.3 (to C culture) for aiming final acetic acid concentration of 60 g/l and 42 g/l, respectively.     

Automatic laboratory-scale fed-batch procedure for production of recombinant proteins using inducible expression systems of Escherichia coli

Summary An automatic fed-batch procedure for the production of recombinant proteins in Escherichia coli was developed. Using glycerol as carbon source and by controlling the growth rate by using feed-forward algorithm, enabled high specific expression level (10–20 % of total cell protein) at high cell densities (20 g dry wt/l) to be achieved: rat and human soluble catechol-O-methyltransferase, calf prochymosin, and human troponin C were expressed with nearly 50-fold higher volumetric yield compared to the conventional (batch) procedures.     

Scalable,two-stage,autoinduction of recombinant protein expression in E. coli utilizing phosphate depletion

We report the scalable production of recombinant proteins in Escherichia coli, reliant on tightly controlled autoinduction, triggered by phosphate depletion in the stationary phase. The method, reliant on engineered strains and plasmids, enables improved protein expression across scales. Expression levels using this approach have reached as high as 55% of the total cellular protein. The initial use of the method in instrumented fed-batch fermentations enables cell densities of ∼30 gCDW/L and protein titers up to 8.1 ± 0.7 g/L (∼270 mg/gCDW). The process has also been adapted to an optimized autoinduction media, enabling routine batch production at culture volumes of 20 μl (384-well plates), 100 μl (96-well plates), 20 ml, and 100 ml. In batch cultures, cell densities routinely reach ∼5–7 gCDW/L, offering protein titers above 2 g/L. The methodology has been validated with a set of diverse heterologous proteins and is of general use for the facile optimization of routine protein expression from high throughput screens to fed-batch fermentation.     

Improved yields of the extracellular domain of the epidermal growth factor receptor produced using the baculovirus expression system by medium replacement following infection

The extracellular domain of the epidermal growth factor receptor (EGFR) was expressed using the baculovirus expression vector system. The maximum level of the EGFR extracellular domain secreted into the medium in Sf-9 (Spodoptera frugiperda or fall armyworm) cell batch culture was approximately 2.5 g ml^–1. In order to increase this yield, a process was developed that included the following sequence of steps: batch growth to maximum cell density, infection of the cells with recombinant virus, and replacement of spent medium. By using this process, the specific yield of recombinant protein, which in batch culture drops when infection is carried out at densities greater than 3 × 10⁶ cells ml^–1, can be maintained at a maximum in cultures infected at densities of 10⁷ cells ml^–1 or greater. The process, when applied to 3-1 and 11-1 bioreactor cultures, allowed a maximum volumetric yield of triple the maximum value attainable in batch culture. Spent-medium analysis indicates that medium replacement provides certain nutrients that could otherwise be limiting for recombinant protein production.     

Production of a high concentration acetic acid by Acetobacter aceti using a repeated fed-batch culture with cell recycling

Summary The acetic acid concentration in a batch culture of Acetobacter aceti M23 increased up to 90 g/l by adding ethanol intermittently. Although the bacterial cells ceased growth at about 60 g acetic acid/l, non-viable cells still preserved ethanol oxidation activity. Cell recycling by filtration in a repeated fed-batch culture increased the overall acetic acid production rate 2.84-fold compared to that without cell recycling for the purpose of obtaining an acetic acid concentration of 80.8 g/l. Repeated fed-batch cultivation with cell recycle was effective for increasing the production rate of acetic acid and obtaining high amounts close to a lethal concentration (90 g/l).Offprint requests to: Kiyoshi Toda     

Continuous culture with complete cell recycle to obtain high cell densities in product inhibited cultures; cultivation ofStreptococcus lactis for production of superoxide dismutase

Summary A cultivation system is described for cultivatingStreptococcus lactis in continuous culture with complete cell recycle. The aim was to obtain high cell densities for the production of su-peroxide dismutase (SOD) while avoiding the growth inhibiting effects of the lactic acid produced. This type of cultivation was performed both at constant and at increasing dilution rates. Comparisons made include those between cell mass productivity and SOD productivity in recycling cultivations and batch cultivations. In the recycling cultivation at increasing dilution rates a cell mass of 19 g/1 was obtained after 22 h of cultivation and the SOD productivity was 43.10³ U/1.h which is four times higher than for batch cultivations. The effect of recyclingS. lactis was also considered and no damage of the microorganisms was observed.     

Drosophila cells can be grown to high cell densities in a bioreactor

Summary Cell cultures of the fruitfly, Drosophila melanogaster, were grown in a bioreactor to high cell densities: 5.7×10⁷ cells/ml, in batch, semi-batch and continuous flow modes. Using a semi-batch culture mode 500g wet weight of cell mass was produced in 16 days, using 5 l of cheap, commercially available, serum-free medium.     

Itaconic acid production by immobilizedAspergillus terreus from xylose and glucose

Summary Aspergillus terreus NRRC 1960 spores were entrapped in calcium alginate gel beads or alternotely the fungal mycelium was immobilized either on Celite R-626 or in agar gel cubes, and the biocatalyst was employed both in repeated batch and in continuous column reactors to produce itaconic acid from D-xylose or D-glucose. The highest itaconic acid yield obtained in a submerged culture batch fermentation was 54.5% based on total initial glucose (55 g/l) with a volumetric productivity of 0.32 g/l h, and 44.8% from xylose (67 g/l) with a productivity of 0.20 g/l h. In a repeated batch fermentation mycelium immobilized in agar gel had a productivity of 0.112 g/l h, and mycelium grown from spores immobilized in calcium alginate gel 0.06 g/l h, both from xylose (60 g/l). With the best immobilized biocatalyst system used employing Celite R-626 as a carrier, volumetric productivities of 1.2 g/l h from glucose and 0.56 g/l h from xylose (both at 60 g/l) were obtained in continuous column operation for more than 2 weeks.     

Process development for an inducible rituximab-expressing Chinese hamster ovary cell line

Inducible mammalian expression systems are becoming increasingly available and are not only useful for the production of cytotoxic/cytostatic products, but also confer the unique ability to uncouple the growth and production phases. In this work, we have specifically investigated how the cell culture state at the time of induction influences the cumate-inducible expression of recombinant rituximab by a GS-CHO cell line. To this end, cells grown in batch and fed-batch cultures were induced at increasing cell densities (1 to 10 × 10 ⁶ cells/mL). In batch, the cell specific productivity and the product yield were found to reduce with increasing cell density at induction. A dynamic feeding strategy using a concentrated nutrient solution applied prior and postinduction allowed to significantly increase the integral of viable cells and led to a 3-fold increase in the volumetric productivity (1.2 g/L). The highest product yields were achieved for intermediate cell densities at induction, as cultures induced during the late exponential phase (10 × 10 ⁶ cells/mL) were associated with a shortened production phase. The final glycosylation patterns remained however similar, irrespective of the cell density at induction. The kinetics of growth and production in a 2 L bioreactor were largely comparable to shake flasks for a similar cell density at induction. The degree of galactosylation was found to decrease over time, but the final glycan distribution at harvest was consistent to that of the shake flasks cultures. Taken together, our results provide useful insights for the rational development of fed-batch cell culture processes involving inducible CHO cells. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2742, 2019     

Continuous alpha-amylase production using Bacillus amyloliquefaciens adsorbed on an ion exchange resin

Summary A method for the continuous production of extracellular alpha amylase by surface immobilized cells of Bacillus amyloliquefaciens NRC 2147 has been developed. A large-pore, macroreticular anionic exchange resin was capable of initially immobilizing an effective cell concentration of 17.5 g DW/1 (based on a total reactor volume of 160 ml). The reactor was operated continuously with a nutrient medium containing 15 g/l soluble starch, as well as yeast extract and salts. Aeration was achieved by sparging oxygen enriched air into the column inlet. Fermentor plugging by cells was avoided by periodically substituting the nutrient medium with medium lacking in both soluble starch and yeast extract. This fermentor was operated for over 200 h and obtained a steady state enzyme concentration of 18700 amylase activity units per litre (18.7 kU/l), and an enzyme volumetric productivity of 9700 amylase activity units per litre per hour (9.7 kU/l-h). Parallel fermentations were performed using a 2 l stirred vessel fermentor capable of operation in batch and continuous mode. All fermentation conditions employed were identical to those of the immobilized cell experiments in order to assess the performance of the immobilized cell reactor. Batch stirred tank operation yielded a maximum amylase activity of 150 kU/l and a volumetric productivity of 2.45 kU/l-h. The maximum cell concentration obtained was 5.85 g DW/l. Continuous stirred tank fermentation obtained a maximum effluent amylase activity of 6.9 kU/l and a maximum enzyme volumetric productivity of 2.73 kU/l-h. Both of these maximum values were observed at a dilution rate of 0.345 l/h. The immobilized cell reactor was observed to achieve larger volumetric productivities than either mode of stirred tank fermentation, but achieved an enzyme activity concentration lower than that of the batch stirred tank fermentor.     

Photosynthetically oxygenated salicylate biodegradation in a continuous stirred tank photobioreactor

A consortium consisting of a Chlorella sorokiniana strain and a Ralstonia basilensis strain was able to carry out sodium salicylate biodegradation in a continuous stirred tank reactor (CSTR) using exclusively photosynthetic oxygenation. Salicylate biodegradation depended on algal activity, which itself was a function of microalgal concentration, light intensity, and temperature. Biomass recirculation improved the photobioreactor performance by up to 44% but the results showed the existence of an optimal biomass concentration above which dark respiration started to occur and the process efficiency started to decline. The salicylate removal efficiency increased by a factor of 3 when illumination was increased from 50-300 microE/m2.s. In addition, the removal rate of sodium salicylate was shown to be temperature-dependent, increasing from 14 to 27 mg/l.h when the temperature was raised from 26.5 to 31.5 degrees C. Under optimized conditions (300 microE/m2.s, 30 degrees C, 1 g sodium salicylate/l in the feed and biomass recirculation) sodium salicylate was removed at a maximum constant rate of 87 mg/l.h, corresponding to an estimated oxygenation capacity of 77 mg O2/l.h (based on a BOD value of 0.88 g O2/g sodium salicylate for the tested bacterium), which is in the range of the oxygen transfer capacity of large-scale mechanical surface aerators. Thus, although higher degradation rates were attained in the control reactor, the photobioreactor is a cost-efficient process which reduces the cost of aeration and prevents volatilization problems associated with the degradation of toxic volatile organic compounds under aerobic conditions.     

Effects of complete cell recycling on product formation byLactobacillus casei ssp.rhamnosus in continuous cultures

The lactic acid bacteriumLactobacillus casei ssprhamnosus was cultivated in a system with complete cell recycling in order to obtain information on how this cultivation technique affected the microorganisms. Cultivations at two different glucose concentrations (25 g/L and 50 g/L) were performed. Hollow fiber filters were used for separating the cells from the spent broth. The cell recycling was carried out for 128–135 h. Samples were taken three to four times daily for analysis ofd- andl-lactate, glucose concentration, and cell mass. Protein patterns were studied with two-dimensional electrophoresis. A change in the protein pattern was observed. Dry weight of cell mass of 86 g/L was obtained when cultivated on 50 g glucose/L, which was approximately 15 times more than in the batch culture. The percentage ofd-lactate of the total lactate increased with time; when cultivated on 25 g glucose/L, it increased from 3% to 13%. No racemase was detected by the methods used. The data collected from these two recycling experiments show that this is an efficient way to obtain high cell densities, but that the method can affect the product formation pattern of the microorganism.     

Production of xylitol in cell recycle fermentations of Candida tropicalis

Xylitol was produced a in two-substrate, batch fermentation with cell recycling of Candida tropicalis ATCC 13803. A series of cell-recycle experiments showed that the feeding of xylose, glucose and yeast extract in the xylitol production phase was most effective in enhancing xylitol productivity. The optimized cell recycle fermentation resulted in 0.82 g xylitol/g xylose yield, 4.94 g xylitol l^–1 h^–1 productivity, and final xylitol concentration of 189 g l^–1. These results were 1.3 times higher in volumetric xylitol productivity and 2.2 times higher in final product concentration compared with the corresponding values of the optimized two-substrate batch culture.     

Ethanol production from concentrated food waste hydrolysates with yeast cells immobilized on corn stalk

The aim of the present study was to examine ethanol production from concentrated food waste hydrolysates using whole cells of S. cerevisiae immobilized on corn stalks. In order to improve cell immobilization efficiency, biological modification of the carrier was carried out by cellulase hydrolysis. The results show that proper modification of the carrier with cellulase hydrolysis was suitable for cell immobilization. The mechanism proposed, cellulase hydrolysis, not only increased the immobilized cell concentration, but also disrupted the sleek surface to become rough and porous, which enhanced ethanol production. In batch fermentation with an initial reducing sugar concentration of 202.64 ± 1.86 g/l, an optimal ethanol concentration of 87.91 ± 1.98 g/l was obtained using a modified corn stalk-immobilized cell system. The ethanol concentration produced by the immobilized cells was 6.9% higher than that produced by the free cells. Ethanol production in the 14th cycle repeated batch fermentation demonstrated the enhanced stability of the immobilized yeast cells. Under continuous fermentation in an immobilized cell reactor, the maximum ethanol concentration of 84.85 g/l, and the highest ethanol yield of 0.43 g/g (of reducing sugar) were achieved at hydraulic retention time (HRT) of 3.10 h, whereas the maximum volumetric ethanol productivity of 43.54 g/l/h was observed at a HRT of 1.55 h.     

Exopolysaccharide biosynthesis by a fast-producing strain of Aureobasidium pullulans

Summary The mutant strain Aureobasidium pullulans ICCF-68 was able to produce in batch fermentation on a glucose medium of 80 g/l, exopolysaccharide at high volumetric productivity and final concentration (1.05 g/l.h and 50.2 g/l, respectively). A specific pH pattern and very high oxygen requirement were shown.     

Production of 2,3-butanediol by Klebsiella oxytoca

Summary High glucose concentrations result in high levels of 2,3-butanediol, improved yield and productivity, and a decrease in cell growth in batch cultures of Klebsiella oxytoca. A maximum of 84.2 g butanediol/l and a yield of 0.5 was obtained with an initial glucose concentration of 262.6g/l. Adding the substrate in two steps in a modified fed-batch operation resulted in 85.5 g butanediol/l, 6.4 g acetoin/l and 3.4 g ethanol/l with a net yield of 0.5. Increasing the cell density to 60g/l resulted in productivities as high as 3.22 g/l.h.     

Cultivation of Thermoanaerobium brockii in continuous culture with complete cell recycling

The growth behaviour of the thermophilic anaerobic bacterium Thermoanaerobium brockii for the production of its intracellular secondary alcohol dehydrogenase (sADH) has been studied in batch cultures as well as in continuous cultivation with complete cell recycling. In batch culture the maximum specific growth rate, μ_MAX, was 0·5 h⁻¹, resulting in a cell density of 1·2 g l⁻¹ and an sADH activity of 1·3 units ml⁻¹. Higher glucose concentrations resulted in a decrease in ep cf7 max rs, enzyme productivity as well as biomass yield although an increase in total biomass was achieved. To improve cell density and productivity, continuous culture with complete cell recycling was used, resulting in an increase in cell density by 5 times and in productivity of the sADH by 3 times in comparison to those obtained in batch culture.     

Production of poly(3-hydroxyalkanoates) by Pseudomonas putida KT2442 in continuous cultures

 The synthesis of poly(3-hydroxyalkanoates) (PHA) by Pseudomonas putida KT2442 growing on long-chain fatty acids was studied in continuous cultures. The effects of the growth rate on the biomass and polymer concentration were determined and it was found that the PHA concentrations decreased with increasing growth rates. The highest volumetric productivity was 0.13 g PHA l^-1 h^-1 at a specific growth rate (μ) of 0.1 h^-1. The molecular mass of the polymer remained constant at all growth rates but changes in the monomeric composition of the PHA synthesized were observed. Variation of the carbon to nitrogen (C/N) ratio of the substrate feed at μ=0.1 h^-1 revealed optimal PHA formation at C/N=20 mol/mol. In order to optimize PHA production P. putida KT2442 was cultivated to high cell densities in oxygen-limited continuous cultures. In this way a maximum biomass concentration of 30 g/l containing approximately 23% PHA was achieved. This corresponds to a volumetric productivity of 0.69 g  l^-1 h^-1. Received: 14 December 1995 / Received revision: 18 April 1996 / Accepted: 22 April 1996