Solid phase peptide synthesis in water VI: evaluation of water-soluble coupling reagents for solid phase peptide synthesis in aqueous media

Solid phase peptide synthesis requires large amounts of organic solvents, the safe disposal of which is an important environmental issue. Peptide synthesis, if performed in water and using less or nontoxic reagents, circumvents the disposal problem. Our ultimate aim is to develop an "environment-friendly" solid phase peptide synthesis (SPPS) methodology. Previously, we showed that SPPS in water is feasible. To perform SPPS in water, the coupling reagent must be water-soluble and maintain its reactivity in water. For this report, we tested the efficacy of the water-soluble coupling reagents, 2-(5-norbornene-2,3-dicarboximido)-1,1,3,3-tetramethyluronium tetrafluoroborate (TNTU) and 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMT-MM), towards SPPS in water. We successfully synthesized Leu-enkephalin amide on a solid support suspended in aqueous 50% EtOH using DMT-MM and 2-(4-sulfophenylsulfonyl)ethoxycarbonylamino acids.     

Assessment of new 6-Cl-HOBt based coupling reagents for peptide synthesis. Part 1: Coupling efficiency study

Summary The efficiency of a series of well-known coupling reagents (TBTU, HATU, and PyBOP) and of newin situ activating reagents (TCTU, HCTU, and DMTMM) was compared by synthesizing the 65–74 fragment of the Acyl Carrier Protein (H-Val-Gln-Ala-Ala-Ile-Asp-Tyr-Ile-Asn-Gly-NH₂), containing ‘a difficult sequence’, as a test peptide, in a multiple peptide synthesizer. The longer sequence rMOG(35–55) was also synthesized. It was clear that the aminium salts are more efficient than the phosphonium salt (PyBOP) and that the new 6Cl-HOBt based reagents (HCTU and particularly TCTU) are very efficient, while DMTMM appeared to be not suitable for SPPS.     

Chemo-enzymatic synthesis of a glycosylated peptide containing a complex <Emphasis Type="Italic">N</Emphasis>-glycan based on unprotected oligosaccharides by using DMT-MM and Endo-M

For chemo-enzymatic synthesis of a glycosylated peptide, 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMT-MM) was used for the synthesis of a N-acetylglucosaminyl peptide and a pseudoglycopeptide by solid-phase peptide synthesis without the requirement of protecting groups on the carbohydrate. We also performed transglycosylation of an N-glycan to the N-acetylglucosaminyl peptide using endo-β-N-acetylglucosaminidase from Mucor hiemalis (Endo-M) to synthesize a glycopeptide containing a complex N-glycan.     

Reversed-phase liquid chromatographic resolution of diastereomers of protein and non-protein amino acids prepared with newly synthesized chiral derivatizing reagents based on cyanuric chloride

Two new chiral monochloro-s-triazines (MCT) were synthesized [viz N-(4-chloro-6-piperidinyl-[1,3,5]-triazine-2-yl)-l-leucine amide and N-(4-chloro-6-piperidinyl-[1,3,5]-triazine-2-yl)-l-leucine) (CDR 1 and 2, respectively)] by the nucleophilic displacement of chlorine atoms in s-triazine moiety. One of the Cl atoms was replaced with piperidine, and the second Cl atom in the 6-piperidinyl derivative was replaced with amino acid amide (viz l-Leu–NH₂) and amino acid (l-Leu). These reagents were characterized and used as CDRs for chiral separation of protein and non-protein amino acids, and were separated on a reversed-phase C₁₈ column. The reaction conditions were optimized for the synthesis of diastereomers using one MCT reagent. The separation method was validated for limit of detection, linearity, accuracy, precision, and recovery.     

Microwave-assisted solid-phase peptide synthesis of the 60–110 domain of human pleiotrophin on 2-chlorotrityl resin

A fast and efficient microwave-assisted solid phase peptide synthesis (MW-SPPS) of a 51mer peptide, the main heparin-binding site (60–110) of human pleiotrophin (hPTN), using 2-chlorotrityl chloride resin (CLTR-Cl) following the 9-fluorenylmethyloxycarbonyl/tert-butyl (Fmoc/tBu) methodology and with the standard N,N′-diisopropylcarbodiimide/1-hydroxybenzotriazole (DIC/HOBt) coupling reagents, is described. An MW-SPPS protocol was for the first time successfully applied to the acid labile CLTR-Cl for the faster synthesis of long peptides (51mer peptide) and with an enhanced purity in comparison to conventional SPPS protocols. The synthesis of such long peptides is not trivial and it is generally achieved by recombinant techniques. The desired linear peptide was obtained in only 30 h of total processing time and in 51% crude yield, in which 60% was the purified product obtained with 99.4% purity. The synthesized peptide was purified by reversed phase high performance liquid chromatography (RP-HPLC) and identified by electrospray ionization mass spectrometry (ESI-MS). Then, the regioselective formation of the two disulfide bridges of hPTN 60–110 was successfully achieved by a two-step procedure, involving an oxidative folding step in dimethylsulfoxide (DMSO) to form the Cys⁷⁷–Cys¹⁰⁹ bond, followed by iodine oxidation to form the Cys⁶⁷–Cys⁹⁹ bond.     

Synthesis of glycosides in which the aglycon is an N-(Hydroxymethyl)amino-1,3,5-triazine derivative

The synthesis of analogues of the anti-tumour drug 2-[N-(hydroxymethyl)methylamino]-4,6-bis (dimethylamino)-1,3,5-triazine (HMPMM) in which the OH or a dimethylamino group is replaced by a carbohydrate has been explored. Triazinyl β-glycosides were readily prepared by reaction of sugars with trimethyl-triazinylammonium salts. These were made with one or two methylamino groups on the triazine for reaction with formaldehyde to give the cytotoxic NMeCH2OH group. However, reaction of the triazinyl glycosides with formaldehyde gave complex intractable mixtures. When the carbohydrate portion was changed to the fully protected 2,3,4,6-tetra-O-acetyl glucose a good yield of the 2-[N-(hydroxymethyl)methylamino]-4-(dimethylamino)-1,3,5-triazin-2-yl tetra-O-acetyl β-glucoside was obtained. However, de-acetylation using sodium methoxide also removed the N–CH2OH group. We are investigating protection of the base-sensitive N–CH2OH group as trialkylsilyl and benzyl ethers and are looking at de-acetylation methods that are more selective. We have prepared glycosides in which the sugar is joined through the oxygen of the NMeCH2OH group. Coupling of acetobromoglucose with HMPMM catalysed by silver salts was not successful. Although methyl and cyclohexyl derivatives of HMPMM may be produced in high yields by reaction of HMPMM with methyl and cyclohexyl alcohols under acidic catalysis, production of glycosides in this way gave poor yields. MNDO calculations on reactions of HMPMM helped us devise improved reaction conditions for the condensation of 2,3,4,6-tetra-O-acetyl glucose with HMPMM and its derivatives. The best procedure to generate one of the target glycosides is to react 2,3,4,6-tetra-O-acetyl glucose and formaldehyde with 2-methylamino- 4,6-bis(dimethylamino)-1,3,5-triazine. The β-glycoside product was de-acetylated using potassium carbonate in dry methanol. Abbreviations: HMM, hexamethylmelamine (2) or 2,4,6-tris(dimethylamino)-1,3,5-triazine; HMPMM, hydroxymethylpentamethylmelamine or 2-[N-(hydroxymethyl)-methylamino]-4,6-bis(dimethylamino)-1,3,5-triazine; PMM, Pentamethylmelamine or 2-methylamino-4,6-bis(dimethylamino)-1,3,5-triazine; TBMS, t-Butyldimethylsilyl; p-TSA, p-Toluenesulphonic acid This revised version was published online in November 2006 with corrections to the Cover Date.     

Synthesis of linear and cyclic opioid‐based peptide analogs containing multiple N‐methylated amino acid residues

A series of six novel opioid peptide analogs containing one to three N‐methylamino acid residues, and six cyclic counterparts of these peptides were prepared by the solid‐phase method. Introduction of two consecutive N‐methylated amino acids, as well as cyclization of such conformationally constrained sequences, turned out to be challenging. The use of a recently reported triazine‐based coupling reagent, 4‐(4,6‐dimethoxy‐1,3,5‐triazin‐2‐yl)‐4‐methylmorpholinium toluene‐4‐sulfonate, enabled the synthesis and cyclization of the designed analogs in acceptable yields and with a lesser amount of by‐products than observed with the standard coupling reagents such as TBTU or HATU.Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Design,synthesis and biological evaluation of novel ureido benzenesulfonamides incorporating 1,3,5-triazine moieties as potent carbonic anhydrase IX inhibitors

A series of novel ureido benzenesulfonamides incorporating 1,3,5-triazine moieties were obtained by reacting 4-isocyanato-benzenesulfonamide (2) with 2-amino-4,6-dicholoro-1,3,5-triazine (4). The 4-(3-(4,6-dichloro-1,3,5-triazin-2-yl)ureido) benzenesulfonamide (5) was subsequently derivatized by reaction with various nucleophiles such as, morpholine, ammonia, methyl amine, dimethyl amine, and piperidine. The ureido benzenesulfonamides incorporating triazinyl moieties were investigated as inhibitors of four selected physiologically relevant human carbonic anhydrase (hCA, EC 4.2.1.1) isoforms, namely, hCA I, II, IX, and XII which are involved in various diseases such as glaucoma, epilepsy, obesity and cancer. The membrane-bound tumor-associated isoform hCA IX was potently inhibited with these compounds with K_is in the range of 0.91–126.2 nM. Specifically, compound 7j showed great potency against hCA IX with sub-nanomolar K_i of 0.91 nM. Since hCA IX is a validated drug target for anticancer agents, these isoform-selective and potent inhibitors may be considered of interest for further medicinal/pharmacologic studies.     

A universal approach to the synthesis of carbohydrate conjugates of polyhedral boron compounds as potential agents for boron neutron capture therapy

A universal approach to the synthesis of carbohydrate conjugates with polyhedral boron compounds (PBCs) was developed. Oligosaccharide derivatives with amino group in aglycone moiety can be conjugated with PBC carboxy derivatives using N-methyl-N-(4,6-dimethoxy-1,3,5-triazin-2-yl)morpholinium chloride as a condensing agent. Both N-and O-glycosides differing in the conformation mobility around the glycoside bond were shown to be useful as oligosaccharides with a functional group in the aglycone moiety. This allows the application of this approach to the synthesis of PBC conjugates with a wide range of oligosaccharides isolated from natural sources can be transformed into N-glycosides with a functional group in aglycone. The approach was tested by conjugation of the carboxy derivatives of ortho-carborane and dodecaborate anion with lactose as a model oligosaccharide. Lactose, an easily available disaccharide, is a ligand of lectins expressed on the surface of melanoma cells. The approach suggested is the first example of the synthesis of such conjugates that does not require protective groups for the carbohydrate residue. It is especially important for obtaining dodecaborate-carbohydrate conjugates for which the removal of protective groups is often a non-trivial task.     

Evaluation of COMU as a coupling reagent for in situ neutralization Boc solid phase peptide synthesis

Benzotriazole‐based coupling reagents have dominated the last two decades of solid phase peptide synthesis. However, a growing interest in synthesizing complex peptides has stimulated the search for more efficient and low‐cost coupling reagents, such as COMU which has been introduced as a nonexplosive alternative to the classic benzotriazole coupling reagents. Here, we present a comparative study of the coupling efficiency of COMU with the benzotriazole‐based HBTU and HCTU for use in in situ neutralization Boc‐SPPS. Difficult sequences, such as ACP(65–74), Jung–Redeman 10‐mer, and HIV‐1 PR(81–99), were used as model target peptides on polystyrene‐based resins, as well as polyethylene glycol‐based resins. Coupling yields obtained using fast in situ Boc‐SPPS cycles were determined with the quantitative ninhydrin test as well as via LC‐MS analysis of the crude cleavage products. Our results demonstrate that COMU coupling efficiency was less effective compared to HBTU and HCTU with HCTU ≥ HBTU > COMU, when polystyrene‐based resins were employed. However, when the PEG resin was employed in combination with a safety catch amide (SCAL) linker, more comparable yields were observed for the three coupling reagents with the same ranking HCTU ≥ HBTU > COMU. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Validation of density functional modeling protocols on experimental bis(μ-oxo)/μ-η<Superscript>2</Superscript>:η<Superscript>2</Superscript>-peroxo dicopper equilibria

The bis(μ-oxo)/μ-η²:η²-peroxo equilibria for seven supported Cu₂O₂ cores were studied with different hybrid and nonhybrid density functional theory models, namely, BLYP, mPWPW, TPSS, TPSSh, B3LYP, mPW1PW, and MPW1K. Supporting ligands 3,3′-iminobis(N,N-dimethylpropylamine), N,N,N′,N′,N″-pentamethyldipropylenetriamine, N-[2-(pyridin-2-yl)ethyl]-N,N,N′-trimethylpropane-1,3-diamine, bis[2-(2-pyridin-2-yl)ethyl]methylamine, bis[2-(4-methoxy-2-pyridin-2-yl)ethyl]methylamine, bis[2-(4-N,N-dimethylamino-2-pyridin-2-yl)ethyl]methylamine, and 1,4,7-triisopropyl-1,4,7-triazacyclononane were chosen on the basis of the availability of experimental data for comparison. Density functionals were examined with respect to their ability accurately to reproduce experimental properties, including, in particular, geometries and relative energies for the bis(μ-oxo) and side-on peroxo forms. While geometries from both hybrid and nonhybrid functionals were in good agreement with experiment, the incorporation of Hartree–Fock (HF) exchange in hybrid density functionals was found to have a large, degrading effect on predicted relative isomer energies. Specifically, hybrid functionals predicted the μ-η²:η²-peroxo isomer to be too stable by roughly 5–10 kcal mol⁻¹ for each 10% of HF exchange incorporated into the model. Continuum solvation calculations predict electrostatic effects to favor bis(μ-oxo) isomers by 1–4 kcal mol⁻¹ depending on ligand size, with larger ligands having smaller differential solvation effects. Analysis of computed molecular partition functions suggests that nonzero measured entropies of isomerization are likely to be primarily associated with interactions between molecular solutes and their first solvation shell. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

In Situ Neutralization in Boc-chemistry Solid Phase Peptide Synthesis

Simple, effective protocols have been developed for manual and machine-assisted Boc-chemistry solid phase peptide synthesis on polystyrene resins. These use in situ neutralization [i.e. neutralization simultaneous with coupling], high concentrations (>0.2 m) of Boc-amino acid-OBt esters plus base for rapid coupling, 100% TFA for rapid Boc group removal, and a single short (30 s) DMF flow wash between deprotection/coupling and between coupling/deprotection. Single 10 min coupling times were used throughout. Overall cycle times were 15 min for manual and 19 min for machine-assisted synthesis (75 residues per day). No racemization was detected in the _.base-catalyzed coupling step. Several side reactions were studied, and eliminated. These included: pyrrolidonecarboxylic acid formation from Gln in hot TFA-DMF; chain-termination by reaction with excess HBTU; and, chain termination by acetylation (from HOAc in commercial Boc-amino acids). The in situ neutralization protocols gave a significant increase in the efficiency of chain assembly, especially for “difficult” sequences arising from sequence-dependent peptide chain aggregation in standard (neutralization prior to coupling) Boc-chemistry SPPS protocols or in Fmoc-chemistry SPPS. Reported syntheses include HIV-1 protease(1–50,Cys.amide), HIV-1 protease(53–99), and the full length HIV-l protease(1–99). Republished with the permission of Blackwell Publishing from International Journal of Peptide Protein Research, volume 40, pp. 180–193, 1992. A preliminary account of this work was presented at the 12th American Peptide Symposium, Cambridge, MA, July 16–21, 1991 (ref. 43). Dedicated to Professor Bruce Merrifield on the occasion of his 70th birthday.     

Aqueous microwave-assisted solid-phase peptide synthesis using Fmoc strategy. III: Racemization studies and water-based synthesis of histidine-containing peptides

In this study, we describe the first aqueous microwave-assisted synthesis of histidine-containing peptides in high purity and with low racemization. We have previously shown the effectiveness of our synthesis methodology for peptides including difficult sequences using water-dispersible 9-fluorenylmethoxycarbonyl-amino acid nanoparticles. It is an organic solvent-free, environmentally friendly method for chemical peptide synthesis. Here, we studied the racemization of histidine during an aqueous-based coupling reaction with microwave irradiation. Under our microwave-assisted protocol using 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride, the coupling reaction can be efficiently performed with low levels of racemization of histidine. Application of this water-based microwave-assisted protocol with water-dispersible 9-fluorenylmethoxycarbonyl-amino acid nanoparticles led to the successful synthesis of the histidine-containing hexapeptide neuropeptide W-30 (10–15), Tyr-His-Thr-Val-Gly-Arg-NH₂, in high yield and with greatly reduced histidine racemization.     

Evaluation of acid‐labile S‐protecting groups to prevent Cys racemization in Fmoc solid‐phase peptide synthesis

Phosphonium and uronium salt‐based reagents enable efficient and effective coupling reactions and are indispensable in peptide chemistry, especially in machine‐assisted SPPS. However, after the activating and coupling steps with these reagents in the presence of tertiary amines, Fmoc derivatives of Cys are known to be considerably racemized during their incorporation. To avoid this side reaction, a coupling method mediated by phosphonium/uronium reagents with a weaker base, such as 2,4,6‐trimethylpyridine, than the ordinarily used DIEA or that by carbodiimide has been recommended. However, these methods are appreciably inferior to the standard protocol applied for SPPS, that is, a 1 min preactivation procedure of coupling with phosphonium or uronium reagents/DIEA in DMF, in terms of coupling efficiency, and also the former method cannot reduce racemization of Cys(Trt) to an acceptable level (<1.0%) even when the preactivation procedure is omitted. Here, the 4,4′‐dimethoxydiphenylmethyl and 4‐methoxybenzyloxymethyl groups were demonstrated to be acid‐labile S‐protecting groups that can suppress racemization of Cys to an acceptable level (<1.0%) when the respective Fmoc derivatives are incorporated via the standard SPPS protocol of phosphonium or uronium reagents with the aid of DIEA in DMF. Furthermore, these protecting groups significantly reduced the rate of racemization compared to the Trt group even in the case of microwave‐assisted SPPS performed at a high temperature. © 2013 The Authors. European Peptide Society published by John Wiley & Sons, Ltd.     

Assessment of new 6-Cl-HOBt based coupling reagents for peptide synthesis. Part 1: Coupling efficiency study

The efficiency of a series of well-known coupling reagents (TBTU, HATU, and PyBOP) and of new in situ activating reagents (TCTU, HCTU, and DMTMM) was compared by synthesizing the 65–74 fragment of the Acyl Carrier Protein (H-Val-Gln-Ala-Ala-Ile-Asp-Tyr-Ile-Asn-Gly-NH₂₎, containing `a difficult sequence', as a test peptide, in a multiple peptide synthesizer. The longer sequence rMOG(35–55) was also synthesized. It was clear that the aminium salts are more efficient than the phosphonium salt (PyBOP) and that the new 6Cl-HOBt based reagents (HCTU and particularly TCTU) are very efficient, while DMTMM appeared to be not suitable for SPPS.     

Application of Dmb-Dipeptides in the Fmoc SPPS of Difficult and Aspartimide-Prone Sequences

Mutter’s pseudoproline dipeptides and Sheppard’s Hmb derivatives are powerful tools for enhancing synthetic efficiency in Fmoc SPPS. They work by exploiting the natural propensity of N-alkyl amino acids to disrupt the formation of the secondary structures during peptide assembly. Their use results in better and more predictable acylation and deprotection kinetics, enhanced reaction rates, and improved yields of crude products. However, these approaches have certain limitations: pseudoproline dipeptides can only be used for sequences containing serine or threonine, and the coupling of the amino acid following the Hmb residue can be extremely difficult. To alleviate some of these shortcomings, we have prepared a range of Fmoc-Aaa-(Dmb)Gly-OH dipeptides and tested their efficacy in the synthesis of a number of challenging hydrophobic peptides. We also compared the efficiency of N-Dmb against N-Hmb backbone protection in preventing aspartimide formation in the Fmoc SPPS of peptides containing the Asp-Gly sequence.     

Conventional and microwave‐assisted SPPS approach: a comparative synthesis of PTHrP(1–34)NH2

Attracted by the possibility to optimize time and yield of the synthesis of difficult peptide sequences by MW irradiation, we compared Fmoc/tBu MW‐assisted SPPS of 1–34 N‐terminal fragment of parathyroid hormone‐related peptide (PTHrP) with its conventional SPPS carried out at RT. MWs were applied in both coupling and deprotection steps of SPPS protocol. During the stepwise elongation of the resin‐bound peptide, monitoring was conducted by performing MW‐assisted mini‐cleavages and analyzing them by UPLC‐ESI‐MS. Identification of some deletion sequences was helpful to recognize critical couplings and as such helped to guide the introduction of MW irradiations to these stages. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Kinetic parameters of Zn uptake by wheat are affected by the herbicide chlorsulfuron

Kinetic parameters of Zn uptake were determined for wheat plants(Triticum aestivum cvs Excalibur and Gatcher, and Triticum turgidumconv. durum cv. Durati) pre-grown at deficient or sufficientZn supply and with 0 or 4 mg m^-3 sulphonylurea herbicide chlorsulfuron(2-chloro-N-(((4-methoxy-6-methyl-1,3,5-triazin-2-yl) amino)carbonyl)-benzenesulphonamide].Net Zn uptake generally showed a saturable response to increasingsolution Zn concentrations; this response fitted a modifiedMichaelis-Menten equation incorporating the C_min term (solutionconcentration when net uptake is     

Synthesis,characterization and in vitro biological evaluation of some novel 1,3,5-triazine–Schiff base conjugates as potential antimycobacterial agents

A series of some novel 1,3,5-triazine–Schiff base conjugates (1–32) have been synthesized and evaluated for their in vitro antimycobacterial activity against Mycobacterium tuberculosis H37Rv using Alamar Blue assay and the activity expressed as the minimum inhibitory concentration (MIC) in μg/mL. Compounds 4 (4-Methoxy-6-methyl-N-(3,4,5-trimethoxybenzylidene)-1,3,5-triazin-2-amine), 11 (4-Methoxy-6-methyl-N-(2-hydroxy-3-bromo-5-chloro-benzylidene)-1,3,5-triazin-2-amine) and 24 (4-Methoxy-6-methyl-N-(1-(2,5-dihydroxyphenyl)ethylidene)-1,3,5-triazin-2-amine) exhibited a significant activity at 3.125, 6.25 and 6.25 μg/mL, respectively, when compared with the antitubercular drugs such as ethambutol (3.125 μg/mL), pyrazinamide (6.25 μg/mL) and streptomycin (6.25 μg/mL) and it could be a potential starting point to develop new lead compounds in the fight against Mycobacterium tuberculosis H37Rv.     

A new method for the quantification of superoxide dismutase mimics with an allopurinol–xanthine oxidase–lucigenin enhanced system

Allopurinol is a prodrug converted to oxypurinol by xanthine oxidase, a process followed by an efficient enzyme inhibition. Using a lucigenin-enhanced chemiluminescence method, we found that, under alkaline conditions, superoxide radicals are produced in large amounts in the first step of the interaction between the enzyme and the inhibitor. A comparison between lucigenin and cytochrome c as final detectors revealed that only the chemiluminescence technique is able to detect the superoxide anions from allopurinol oxidation. The allopurinol–xanthine oxidase–lucigenin system can be used for the quantification of various free-radical scavengers, in particular superoxide dismutase mimics. Three manganese compounds from different structural classes [manganese(II) chloride, manganese N,N′-bis(salicylidiene)ethylenediamine chloride, and manganese(III) meso-tetrakis(N-ethylpyridinium-2-yl)porphyrin] were compared at five concentrations (0.01, 0.1, 1, 10, and 100 μM). The method is fast, 16 times more sensitive than the cytochrome c assay at pH 10.1 and could be used for in vivo investigations avoiding the lucigenin redox cycle. If the concentrations of the reagents are increased and Tween 20 is added, the method is also operative at pH 7.4.