Molecular movements in the actomyosin complex: F-actin-promoted internal cross-linking of the 25- and 20-kDa heavy chain fragments of skeletal myosin subfragment.

We describe, for the first time, the F-actin-promoted changes in the spatial relationship of strands in the NH2-terminal 25-kDa and COOH-terminal 20-kDa heavy chain fragments of the skeletal myosin subfragment 1 (S-1), detected by their exclusive chemical cross-linking in the rigor F-actin-S-1 complex with m-maleimidobenzoic acid N-hydroxysuccinimide ester (MBS). Quantitative electrophoretic analysis of the reaction products showed extensive conversion of the 95-kDa heavy chain of the actin-bound S-1 into a new species with an apparent mass of 135 kDa (yield = 50-60%), whereas the heavy chain mobility remained unaffected when actin was omitted. The 135-kDa entity retained the fluorescence of AEDANS-S-1 but not of AEDANS-actin, indicating that it was not a cross-linked acto-heavy chain adduct. Its extent of production depended markedly on the S-1: actin molar ratio and was maximum near a ratio of 1:4. The MBS treatment of acto-S-1 led also to some covalent actin-actin oligomers which could be suppressed by using trypsin-truncated F-actin lacking Cys-374, without altering the generation of the 135-kDa heavy chain derivative.(ABSTRACT TRUNCATED AT 250 WORDS)     

The myosin SH2-50-kilodalton fragment cross-link: location and consequences

Some of us recently described a new interthiol cross-link which occurs in the skeletal myosin subfragment 1-MgADP complex between the reactive sulfhydryl group "SH2" (Cys-697) and a thiol (named SH chi) of the 50-kilodalton (kDa) central domain of the heavy chain; this link leads to the entrapment of the nucleotide at the active site [Chaussepied, P., Mornet, D., & Kassab, R. (1986) Proc. Natl. Acad. Sci. U.S.A. 83, 2037-2041]. In the present study, we identify SH chi as Cys-540 of the 50-kDa fragment. The portion of the heavy chain including this residue and also extending to Cys-522 that is cross-linkable to the "SH1" thiol [Ue, K. (1987) Biochemistry 26, 1889-1894] is near the SH2-SH1 region. Furthermore, various spectral and enzymatic properties of the (Cys697-Cys540)-N,N'-p-phenylenedimaleimide (pPDM)-cross-linked myosin chymotryptic subfragment 1 (S-1) were established and compared to those for the well-known (SH1-SH2)-pPDM-cross-linked S-1. The circular dichroism spectra of the new derivative were similar to those of native S-1 complexed to MgADP. At 15 mM ionic strength, (Cys697-Cys540)-S-1 binds very strongly to unregulated actin (Ka = 7 X 10(6) M-1), and the actin binding is very weakly affected by ionic strength. Joining actin with the (Cys697-Cys540)-S-1 heavy chain, using 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide, produces different species than does joining unmodified S-1 with actin.(ABSTRACT TRUNCATED AT 250 WORDS)     

Effect of mild heat treatment on the ATPase activity and proteolytic sensitivity of myosin subfragment-1

The K+-EDTA-activated ATPase activity of chymotryptic myosin subfragment-1 (S-1) decreased by 85-90% when S-1 was incubated over a 2-h period at 35 degrees C. Addition of F-actin, ATP, or ATP analogs, such as ADP or PPi, to S-1 before incubation at 35 degrees C prevented the loss of ATPase activity. The decrease in ATPase activity was also accompanied by changes in tryptic sensitivity. Instead of the normal peptide pattern--which is comprised of three heavy chain fragments (27K, 50K, and 20K)--only two fragments (27K and 20K) appeared on the sodium dodecyl sulfate-gel electrophoregram after limited tryptic digestion of thermally treated S-1. Addition of any ligand--e.g. ATP, ADP, pyrophosphate, or actin--which prevented the loss of ATPase activity during incubation at 35 degrees C also prevented the observed change in the tryptic peptide pattern of S-1. Tryptic digested S-1, whose heavy chain has been cleaved to 27K, 50K, and 20K fragments, also lost its ATPase activity upon mild heat treatment. The heat-treated trypsin-digested S-1 was subjected to a second tryptic digestion, which resulted in the disappearance of the 50K fragment, while the 50K fragment of tryptic S-1 not subjected to heat treatment was not susceptible to additional tryptic hydrolysis. The results indicate that the structural changes, that take place specifically in the 50K region of S-1 upon mild heat treatment, lead to both the loss of the ATPase activity and the changed tryptic sensitivity of S-1.     

The limited tryptic cleavage of chymotryptic S-1: an approach to the characterization of the actin site in myosin heads.

Limited tryptic proteolysis of S-1 (A₁+A₂) or S-1 (A₁) and S-1 (A₂) converts the heavy chain into 3 fragments of Mr = 27K-50K-20K. As a result the actin-stimulated ATPase activity of the fragmented heads is lost. When the digestion is performed using the complex F-actin-S-1, this ATPase activity is completely preserved and the heavy chain is split into only 2 fragments of Mr = 27K–70K. The specific protection by F-actin of the -COOH terminal region of the heavy chain at the joint 50K-20K against tryptic cleavage and loss of activity suggests that this part of the head can be involved in actin binding site and/or Mg²⁺ ATP hydrolysis by the acto-S-1 complex.     

Complex formation between regulatory and essential light chain on squid mantle myosin subfragment-1 revealed by thermal denaturation method.

Thermal treatment of squid myosin subfragment-1 (S-1) in the presence of EDTA results in a rapid inactivation of ATPase, a marked turbidity increase, and a dissociation of light chains. These effects were suppressed by addition of calcium ion. Different light chain binding in EDTA-medium from that in Ca-medium was demonstrated by the tryptic digestion of native squid S-1; the two types of light chain are both resistant to trypsinolysis in Ca-medium, whereas they are readily degraded in EDTA-medium. S-1 heavy chain was converted into three fragments with sizes of 27, 47, and 22 kDa in both media. However, trypsinolysis of S-1 inactivated in Ca-medium generated no such heavy chain fragments that survived, while the two types of light chain survived. These light chains were isolated as a complex lacking any heavy chain fragments, and the complex formation was Ca-sensitive. It is concluded that regulatory and essential light chains are present on S-1 as a complex whose formation is mediated by calcium ion, and this binding might alter the S-1 conformation so as to confer resistance to thermal treatment.     

Proteolytic fragmentation of myosin: location of SH-1 and SH-2 thiols.

The heavy chain fragmentation pattern of native myosin when digested by proteolytic enzymes is influenced by such conditions as the nature of the proteolytic agent, ionic strength and presence or absence of divalent cations. HMM and S-1 produced by digestion of 14CNEM-labelled myosin under various conditions were analyzed by sodium dodecyl-sulfate polyacrylamide gel electrophoresis. Purified samples of these species were digested under controlled conditions by chymotrypsin and trypsin and a comparison of the observed heavy chain fragmentation patterns led to a sequential arrangement of the proteolytic fragments. The main features of this arrangement are the following: a 21K molecular weight tryptic peptide is found at the N-terminal side of myosin heavy chain. Adjacent to it is a 48K peptide, then a 19.5K peptide containing the two SH-1 and SH-2 thiols. These three peptides constitute the heavy chain of S-1. Adjacent to this S-1 heavy chain is a tryptic (and also chymotryptic) 40K peptide. The rest of the HMM heavy chain on the C-terminus is a sequence susceptible to both chymotrypsin and trypsin attack yielding an undefined number of small peptides.     

Monoclonal antibodies distinguish between the head portions of two myosin isozymes from chicken breast muscle

Monoclonal antibodies against chicken breast myosin and its subfragment-1(S-1) were produced. One antibody, 2G41, reacted with S-1 containing a light chain 3 (LC3), but not with another S-1 containing a light chain 1 (LC1) or a mixture of the light chains. A structural difference can be assumed to exist between the head portions of the two myosin isozymes. Antigenicity of S-1 toward 2G41 could not be detected after tryptic digestion into three fragments of 50K, 27K, and 20K daltons. Another monoclonal antibody, M68, was obtained from mice immunized with myosin. M68 preferably recognized the heavy chain from S-1 containing LC3 rather than that from that containing LC1 or S-1. M68 reacted with the 27K fragment among the three.     

Interaction between the heavy and the regulatory light chains in smooth muscle myosin subfragment 1.

The interaction between the heavy and the regulatory light chains within chicken gizzard myosin heads was investigated by using a zero-length chemical cross-linker, 1-ethyl-3-[3-(dimethylamino)-propyl]carbodiimide (EDC). The chicken gizzard subfragment 1 (S-1) used was treated with papain so that the heavy chain was partly cleaved into the NH2-terminal 72K and the COOH-terminal 24K fragments and the regulatory light chain into the 16K fragment. S-1 was reacted with EDC either alone or in the presence of ATP or F-actin. In all cases, the 16K fragment of the regulatory light chain formed a covalent cross-link with the 24K heavy chain fragment but not with the 72K fragment. The 38K cross-linked peptide, which was the product of cross-linking between the 16K light chain and the 24K heavy chain fragments, was isolated and further cleaved with cyanogen bromide and arginylendopeptidase. Smaller cross-linked peptides were purified by reverse-phase HPLC and then characterized by amino acid analysis and sequencing. The results indicated that cross-linking occurred between Lys-845 in the heavy chain and Asp-168, Asp-170, or Asp-171 in the regulatory light chain. The position of the cross-linked lysine was only three amino acid residues away from the invariant proline residue mapped as the S-1-rod hinge by McLachlan and Karn [McLachlan, A. D., & Karn, J. (1982) Nature (London) 299, 226-231]. We propose that the COOH-terminal region of the regulatory light chain is located in the neck region of myosin and that this region and the phosphorylation site of the regulatory light chain together may play a role in the phosphorylation-induced conformational change of gizzard myosin.     

Trypsinolysis promotes disulfide formation between 21- and 50-kilodalton segments of myosin subfragment 1 during reaction with 5,5'-dithiobis(2-nitrobenzoic acid)

The reaction of 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB) with S1 and tryptic S1 has been examined to identify the sites of mixed and intramolecular disulfides formed in the initial and final stages of the reaction in these two forms of S1. With undigested S1, the two mixed disulfide bonds initially formed were found to be in the 21-kDa segment. The intramolecular disulfide bond, formed in the subsequent slow phase of the reaction, was also found to be mainly confined to the 21-kDa segment although a small fraction arose from disulfide formation between the 21-kDa and 50-kDa segments. Only 35% of the light chain was modified in undigested S1 after 24 h. For tryptic S1, the initial reaction also led to the formation of mixed disulfides in the 21-kDa segment. However, in the second slower phase, the formation of the intramolecular disulfide occurred primarily between thiols in the 21-kDa and 50-kDa fragments, and in this case, the light chain was labeled to about 60% after 24 h. The enhanced formation of disulfide links between 21-kDa and 50-kDa domains in tryptic S1 points to an increase in flexibility between the thiol-containing regions of these segments.     

Reaction of thiol groups of gizzard myosin heavy chains with 7-chloro-4-nitrobenzo-2-oxa-1,3-diazole

Chicken gizzard myosin treated with 7-chloro-4-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) resulted in a 65% inhibition of the K(+)-ATPase (myosin ATP phosphohydrolase (actin translocating), EC 3.6.1.32) activity and 3.5 mol of the reagent was bound per 4.7 x 10(5) g protein. The labeling was limited to the heavy chain region and none of the light chains were lost. MgATP had no effect on the inactivation or labeling pattern. Thiolysis of NBD-myosin with dithiothreitol restored the K(+)-ATPase activity and concurrently, 1 mol of the NBD group was removed from the heavy chain region. Cysteine residues were modified in NBD-myosin at sites other than the active site when the enzyme activity was inhibited. There was a difference in the extent of NBD-Cl modification of gizzard myosin at 0.6 M KCl (6 S elongated state) when compared to that at 0.15 M KCl (10 S folded state). This was also seen in the heavy meromyosin-like chymotryptic fragments and tryptic fragments of NBD-myosin. The reagent NBD-Cl can detect changes in the conformation of gizzard myosin by way of its reaction with thiol groups of the heavy chain region.     

Comparative structure of the protease-sensitive regions of the subfragment-1 heavy chain from smooth and skeletal myosins

The heavy chain fragments generated by restricted proteolysis of the smooth chicken gizzard myosin subfragment-1 (S-1) with trypsin, Staphylococcus aureus V8 protease, and chymotrypsin were isolated and submitted to partial amino acid sequencing. The comparison between the smooth and striated muscle myosin sequences permitted the unambiguous structural characterization of the two protease-vulnerable segments joining the three putative domain-like regions of the smooth head heavy chain. The smooth carboxyl-terminal connector is a serine-rich region located around positions 632-640 of the rabbit skeletal sequence and would represent the "A" site that is conformationally sensitive to the myosin 10 S-6 transition and to its interaction with actin (Ikebe, M., and Hartshorne, D. J. (1986) Biochemistry 25, 6177-6185). A third site which undergoes a nucleotide-dependent chymotryptic cleavage which inactivates the Mg2+-ATPase (Okamoto, Y., and Sekine, T. (1981) J. Biochem. (Tokyo) 90, 833-842, 843-849) was identified at Trp-31/Ser-32. It is vicinal to Lys-34 that is monomethylated in the skeletal heavy chain but not at all in the smooth sequence. However, the two trimethyl lysine residues present in the skeletal sequence are conserved in the same regions of the smooth S-1 and may play a general functional role in myosin. The smooth central 50-kDa segment could be selectively destroyed by a mild tryptic digestion in the absence of any unfolding agent, with a concomitant inhibition of the ATPase activities. This feature is in line with the proposed domain structure of the S-1 heavy chain and also suggests a relationship between the specific biochemical properties of the smooth S-1 and the particular conformation of its 50-kDa region.     

Cross-linking of the skeletal myosin subfragment 1 heavy chain to the N-terminal actin segment of residues 40-113

Glutaraldehyde (GA) and N-(ethoxycarbonyl)-2-ethoxy-1,2-dihydroquinoline (EEDQ), a hydrophobic, carboxyl group directed, zero-length protein cross-linker, were employed for the chemical cross-linking of the rigor complex between F-actin and the skeletal myosin S-1. The enzymatic properties and structure of the new covalent complexes obtained with both reagents were determined and compared to those known for the EDC-acto-S-1 complex. The GA- or EEDQ-catalyzed covalent attachment of F-actin to the S-1 heavy chain induced an elevated Mg2+-ATPase activity. The turnover rates of the isolated cross-linked complexes were similar to those for EDC-acto-S-1 (30 s-1). The solution stability of the new complexes is also comparable to that exhibited by EDC-acto-S-1. The proteolytic digestion of the isolated AEDANS-labeled covalent complexes and direct cross-linking experiments between actin and various preformed proteolytic S-1 derivatives indicated that, as observed with EDC, the COOH-terminal 20K and the central 50K heavy chain fragments are involved in the cross-linking reactions of GA and EEDQ. KI-depolymerized acto-S-1 complexes cross-linked by EDC, GA, or EEDQ were digested by thrombin which cuts only actin, releasing S-1 heavy chain-actin peptide cross-linked complexes migrating on acrylamide gels with Mr 100K (EDC), 110K and 105K (GA), and 102K (EEDQ); these were fluorescent only when fluorescent S-1 was used. They were identified by immunostaining with specific antibodies directed against selected parts of he NH2-terminal actin segment of residues 1-113.(ABSTRACT TRUNCATED AT 250 WORDS)     

Localisation of light chain and actin binding sites on myosin

A gel overlay technique has been used to identify a region of the myosin S-1 heavy chain that binds myosin light chains (regulatory and essential) and actin. The 125I-labelled myosin light chains and actin bound to intact vertebrate skeletal or smooth muscle myosin, S-1 prepared from these myosins and the C-terminal tryptic fragments from them (i.e. the 20-kDa or 24-kDa fragments of skeletal muscle myosin chymotryptic or Mg2+/papain S-1 respectively). MgATP abolished actin binding to myosin and to S-1 but had no effect on binding to the C-terminal tryptic fragments of S-1. The light chains and actin appeared to bind to specific and distinct regions on the S-1 heavy chain, as there was no marked competition in gel overlay experiments in the presence of 50-100 molar excess of unlabelled competing protein. The skeletal muscle C-terminal 24-kDa fragment was isolated from a tryptic digest of Mg2+/papain S-1 by CM-cellulose chromatography, in the presence of 8 M urea. This fragment was characterised by retention of the specific label (1,5-I-AEDANS) on the SH1 thiol residue, by its amino acid composition, and by N-terminal and C-terminal sequence analyses. Electron microscopical examination of this S-1 C-terminal fragment revealed that: it had a strong tendency to form aggregates with itself, appearing as small 'segment-like' structures that formed larger aggregates, and it bound actin, apparently bundling and severing actin filaments. Further digestion of this 24-kDa fragment with Staphylococcus aureus V-8 protease produced a 10-12-kDa peptide, which retained the ability to bind light chains and actin in gel overlay experiments. This 10-12-kDa peptide was derived from the region between the SH1 thiol residue and the C-terminus of S-1. It was further shown that the C-terminal portion, but not the N-terminal portion, of the DTNB regulatory light chain bound this heavy chain region. Although at present nothing can be said about the three-dimensional arrangement of the binding sites for the two kinds of light chain (regulatory and essential) and actin in S-1, it appears that these sites are all located within a length of the S-1 heavy chain of about 100 amino acid residues.     

Involvement of C-terminal 14 residues of alkali light chain in binding to the heavy chain of myosin

The alkali light chain of rabbit skeletal muscle myosin, A1, was cyanylated with 2-nitro-5-thiocyanobenzoic acid, and the peptide bond at Cys 177 was subsequently cleaved in the presence of 0.05 M CaCl2. Two peptide fragments, from the N-terminal to the residue 176 (CF1) and from the residue 177 to the C-terminal (CF2), were obtained. The CD spectrum and the difference UV absorption spectrum induced by CaCl2 suggested that CF1 largely retained the higher order structure of A1. The CF1 fragment, however, could neither incorporate subfragment-1 (S-1) by an exchange reaction, nor bind with the renatured 20K fragment of S-1 heavy chain. On the other hand, the C-terminal fragment of 14 residues, CF2, could bind with the 20K fragment of S-1 heavy chain. These results indicate that the binding site of the alkali light chain for the heavy chain of myosin is located within the C-terminal 14 residues.     

Intrachain disulfide bond in the core hinge region of human IgG4.

IgG is a tetrameric protein composed of two copies each of the light and heavy chains. The four-chain structure is maintained by strong noncovalent interactions between the amino-terminal half of pairs of heavy-light chains and between the carboxyl-terminal regions of the two heavy chains. In addition, interchain disulfide bonds link each heavy-light chain and also link the paired heavy chains. An engineered human IgG4 specific for human tumor necrosis factor-alpha (CDP571) is similar to human myeloma IgG4 in that it is secreted as both disulfide bonded tetramers (approximately 75% of the total amount of IgG) and as tetramers composed of nondisulfide bonded half-IgG4 (heavy chain disulfide bonded to light chain) molecules. However, when CDP571 was genetically engineered with a proline at residue 229 of the core hinge region rather than serine, CDP571 (S229P), or with an IgG1 rather than IgG4 hinge region, CDP571(gamma 1), only trace amounts of nondisulfide bonded half-IgG tetramers were observed. Trypsin digest reversephase HPLC peptide mapping studies of CDP571 and CDP571(gamma 1) with on-line electrospray ionization mass spectroscopy supplemented with Edman sequencing identified the chemical factor preventing inter-heavy chain disulfide bond formation between half-IgG molecules: the two cysteines in the IgG4 and IgG1 core hinge region (CPSCP and CPPCP, respectively) are capable of forming an intrachain disulfide bond. Conformational modeling studies on cyclic disulfide bonded CPSCP and CPPCP peptides yielded energy ranges for the low-energy conformations of 31-33 kcal/mol and 40-42 kcal/mol, respectively. In addition, higher torsion and angle bending energies were observed for the CPPCP peptide due to backbone constraints caused by the extra proline. These modeling results suggest a reason why a larger fraction of intrachain bonds are observed in IgG4 rather than IgG1 molecules: the serine in the core hinge region of IgG4 allows more hinge region flexibility than the proline of IgG1 and thus may permit formation of a stable intrachain disulfide bond more readily.     

Free sulfhydryl in recombinant monoclonal antibodies

Monoclonal antibody (mAb) therapy applications have been growing rapidly in recent years. Like other recombinant protein drugs, therapeutic mAb's need to be well characterized to ensure their structural and functional integrity. IgG mAb's are composed of two heavy and two light chains covalently linked by interchain disulfide bonds. Each domain of the heavy or light chain contains one additional disulfide bond. Native IgG mAb's, with completely formed disulfide bonds, should not bear any free sulfhydryl. This report describes detection and quantification of free sulfhydryl in recombinant mAb's produced in Chinese hamster ovary (CHO) cells using a fluorescent technique. The method utilizes the fluorescent probe N-(1-pyrenyl)maleimide (NPM). The purified mAb's appear to be homogeneous under native conditions with approximately 0.02 mol of free sulfhydryl per mole of protein. Upon denaturation, minor species related to the mAb's are observed on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), and the free sulfhydryl level is determined to be approximately 0.1 mol/mol of protein. These results suggest that a small portion of these recombinant mAb's lack in intermolecular disulfide bonds but remain noncovalently associated under native conditions. The formation of the free sulfhydryl containing mAb species is likely to occur during the culture process and/or protein folding process in the endoplasmic reticulum (ER).     

Ca2+ binding properties and Ca2(+)-dependent interactions of the isolated NH2-terminal alpha fragments of human complement proteases C1-r and C1-s

The NH2-terminal alpha fragments of human complement proteases C1-r and C1-s were obtained by limited proteolysis of the native proteins with trypsin, and isolated. C1-r alpha extended from residues 1 to 208 of C1-r A chain, with at least two cleavage sites within disulfide loops, after lysine 134 and arginine 202. C1-s alpha comprised residues 1-192 of the C1-s A chain, with one cleavage site within a disulfide loop, after arginine 186. C1-r alpha was monomeric either in the presence or absence of Ca2+ but formed Ca2(+)-dependent dimers with native C1-s. C1-s alpha dimerized in the presence of Ca2+ and formed Ca2(+)-dependent tetramers (C1-s alpha-C1-r-C1-r-C1-s alpha) with native C1-r. C1-r alpha and C1-s alpha associated in the presence of Ca2+ to form C1-r alpha-C1-s alpha heterodimers. Equilibrium dialysis studies indicated that each alpha region binds Ca2+ with a dissociation constant ranging from 19 microM (native proteins) to 38 microM (fragments). C1-r alpha, C1-r alpha-C1-s alpha, and the native C1-s-C1-r-C1-r-C1-s tetramer bound 0.9, 1.9, and 4.0 Ca2+ atoms/mol, respectively, whereas dimers C1-s alpha-C1-s alpha and C1-s-C1-s incorporated 2.9 and 3.0 Ca2+ atoms/mol. It is concluded that each alpha region contains one high affinity Ca2+ binding site. This 1:1 stoichiometry is maintained upon heterologous (C1-r-C1-s) interaction, whereas the homologous (C1-s-C1-s) interaction provides one additional binding site.     

Involvement of heparin chain length in the heparin-catalyzed inhibition of thrombin by antithrombin III

The mechanism of the heparin-promoted reaction of thrombin with antithrombin III was investigated by using covalent complexes of antithrombin III with either high-affinity heparin (Mr = 15,000) or heparin fragments having an average of 16 and 12 monosaccharide units (Mr = 4,300 and 3,200). The complexes inhibit thrombin in the manner of active site-directed, irreversible inhibitors: (Formula: see text) That is, the inhibition rate of the enzyme is saturable with respect to concentration of complexes. The values determined for Ki = (k-1 + k2)/k1 are 7 nM, 100 nM, and 6 microM when the Mr of the heparin moieties are 15,000, 4,300, 3,200, respectively, whereas k2 (2 S-1) is independent of the heparin chain length. The bimolecular rate constant k2/Ki for intact heparin is 3 X 10(8) M-1 S-1 and the corresponding second order rate constant k1 is 6.7 X 10(8) M-1 S-1, a value greater than that expected for a diffusion-controlled bimolecular reaction. The bimolecular rate constants for the complexes with heparin of Mr = 4,300 and 3,200 are, respectively, 2 X 10(7) M-1 S-1 and 3 X 10(5) M-1 S-1. Active site-blocked thrombin is an antagonist of covalent antithrombin III-heparin complexes: the effect is monophasic and half-maximum at 4 nM of antagonist against the complex with intact heparin, whereas the effect is weaker against complexes with heparin fragments and not monophasic. We conclude that virtually all of the activity of high affinity, high molecular weight heparin depends on binding both thrombin and antithrombin III to heparin, and that the exceptionally high activity of heparin results in part from the capacity of thrombin bound nonspecifically to heparin to diffuse in the dimension of the heparin chain towards bound antithrombin III. Increasing the chain length of heparin results in an increased reaction rate because of a higher probability of interaction between thrombin and heparin in solution.     

Hydrophobic interaction chromatography of myosin fragments: Potential use in purification

Myosin fragments were fractionated on columns of the hydrophobic gel phenyl-Sepharose CL-4B. In the presence of high NaCl concentrations the fragments bound tightly to the columns; they could be eluted by decreasing the ionic strength, by increasing the pH, or by applying various concentrations of ethylene glycol. In myosin subfragment-1 (S-1), the light chains underwent partial dissociation from the heavy chain and bound separately to the column matrix. The order of strength of binding of the various species to the column was heavy chain > A1 light chain > A2 light chain > native S-1 > denatured heavy chain or S-1. Thus the hydrophobic gel appears to be able to differentiate between enzymatically active and inactive S-1. Under appropriate elution conditions it was possible to obtain S-1 preparations depleted from nicked heavy chains and with specific ATPase activities 34–130% higher than those of untreated S-1. When S-1(A2) was fractionated on phenyl-Sepharose a fivefold enrichment of the heavy chain with respect to the light chains was obtained, while the ATPase activity was equal or larger than that of the original S-1, implying that the light chains are not essential for ATPase activity. Thus, it seems that chromatography of S-1 on phenyl-Sepharose is a potentially useful method for obtaining a purified myosin heavy-chain fragment with a high ATPase specific activity.     

Nucleotide-induced changes in the proteolytically sensitive regions of myosin subfragment 1

Limited proteolytic digestions of myosin subfragment 1 (S-1) with elastase, subtilisin, papain, and thermolysin yield fragments that correspond within 1-2K daltons to the 25K, 50K, and 20K fragments produced by trypsin. While papain and thermolysin cut preferentially at the 26K/70K junction, elastase and subtilisin cleave both the 26K/70K and the 75K/22K junctions in S-1. Using the above proteases as conformational probes, we have previously demonstrated that the binding of actin is sensed at both the 26K/50K and the 50K/22K junctions [Applegate, D., & Reisler, E. (1983) Proc. Natl. Acad. Sci. U.S.A. 80, 7109-7112]. We report here that the binding of nucleotides at the active site is also sensed at both junctions. Both 2 mM MgADP and 5 mM MgATP slow the rate of elastase and subtilisin cleavage of the 95K heavy chain. With elastase, the 3-fold decrease in the rate of cleavage induced by nucleotides is evidenced at both the 26K/50K and the 50K/22K junctions. The analysis of subtilisin digestions is complicated by Mg nucleotide induced cleavage at a new site to produce a 91K fragment. Using N-methyl-6-anilinonaphthalene-2-sulfonyl chloride (MnsCl) to fluorescently label the 26K peptide, we demonstrate that the additional cleavage site is approximately 4K daltons from the N-terminal portion of the 95K heavy chain.(ABSTRACT TRUNCATED AT 250 WORDS)