An In Vitro Procedure for Estimation of Lead Relative Bioavailability: With Validation

The relative bioaccessibility leaching procedure (RBALP) is a simple, reproducible, and rapid in vitro procedure for estimating the in vivo (juvenile swine) relative bioavailability (RBA) of lead in solid media. Control of pH, temperature, and agitation are the most critical parameters of this in vitro procedure. The performance of the method was evaluated by triplicate analyses of each of 19 different test substances by the author and three independent laboratories, and comparison of the results to relative bioavailability (RBA) values measured in vivo. The results indicate that the RBALP measurements are strongly correlated with the in vivo RBA values (r² = 0.924, p < 0.0001), with an average absolute error of 10% and an average predictive error of 20%. Comparison of results within and between laboratories indicates that the procedure is highly reproducible, with inter-and intra-laboratory coefficients of variation of 4% and 6%, respectively, and within-sample precision of approximately 7%. Based on the results reported here, the RBALP can be effective in providing reliable estimates of lead RBA as predicted by the immature swine model. The method may also be valuable in evaluating site-specific differences in bioaccessibility, assessing remedial technologies intended to reduce lead RBA, providing a screening mechanism for futurein vivo studies, and providing insight into the chemical and physical factors that control lead bioavailability.     

SMEDDS of Glyburide: Formulation, In Vitro Evaluation, and Stability Studies

The objective of the present investigation was to develop and evaluate self-microemulsifying drug delivery system (SMEDDS) for improving the delivery of a BCS class II antidiabetic agent, glyburide (GLY). The solubility of GLY in oils, cosurfactants, and surfactants was evaluated to identify the components of the microemulsion. The ternary diagram was plotted to identify the area of microemulsion existence. The in vitro dissolution profile of GLY SMEDDS was evaluated in comparison to the marketed GLY tablet and pure drug in pH 1.2 and pH 7.4 buffers. The chemical stability of GLY in SMEDDS was determined as per the International Conference on Harmonisation guidelines. The area of microemulsion existence increased with the increase in the cosurfactant (Transcutol P) concentration. The GLY microemulsion exhibited globule size of 133.5 nm and polydispersity index of 0.94. The stability studies indicated that GLY undergoes significant degradation in the developed SMEDDS. This observation was totally unexpected and has been noticed for the first time. Further investigations indicated that the rate of GLY degradation was highest in Transcutol P.     

Studies on Mefenamic Acid Microparticles: Formulation, In Vitro Release, and In Situ Studies in Rats

In this study, we investigated the in vitro characteristics of mefenamic acid (MA) microparticles as well as their effects on DNA damage. MA-loaded chitosan and alginate beads were prepared by the ionotropic gelation process. Microsponges containing MA and Eudragit RS 100 were prepared by quasi-emulsion solvent diffusion method. The microparticles were characterized in terms of particle size, surface morphology, encapsulation efficiency, and in vitro release profiles. Most of the formulation variables manifested an influence on the physical characteristics of the microparticles at varying degrees. We also studied the effects of MA, MA-loaded microparticles, and three different polymers on rat brain cortex DNA damage. Our results showed that DNA damage was higher in MA-loaded Eudragit microsponges than MA-loaded biodegradable chitosan or alginate microparticles.     

Spray Dried Formulation of 5-Fluorouracil Embedded with Probiotic Biomass: In Vitro and In Vivo Studies

The present study is utilizing the targeted therapeutic approach and antioxidant potential of selected probiotic biomass in mitigating toxic side effects of chemotherapeutic agents. Multicomponent carrier system consisting of 5-fluorouracil (5-FU) and selected probiotic strain with higher free radical scavenging activity was prepared using spray drying technique. Prepared spray dried microparticles were characterized for various physical, pharmaceutical, and biopharmaceutical properties including particle size, moisture content, entrapment efficiency, in vitro drug release, DSC, XRD, cell uptake, histopathology, and pharmacokinetic studies. In addition to the above, optimized formulation was subjected to in vivo targeting efficacy studies using radiographic technique. Optimized formulation meets the necessary physical requirement for pharmaceutical powder. X-ray studies revealed that the prepared spray dried formulations are able to target the colon. Pharmacokinetic endpoints with an extended t _1/2 and lower C _max indicate lower systemic toxicity. Intact nature of colonic epithelium in experimental formulation clearly demonstrates the protective role of Lactobacillus rhamnosus in minimizing the harmful consequence induced by 5-FU. Existing outcomes provide the basis for a combination of targeted therapeutic approach with natural antioxidant capacity of potential probiotic strain which could help to mitigate the problems associated with traditional chemotherapy.     

Microemulsion-Based Vaginal Gel of Clotrimazole: Formulation, In Vitro Evaluation, and Stability Studies

The objective of the present investigation was to develop and evaluate microemulsion-based gel for the vaginal delivery of clotrimazole (CMZ). The solubility of CMZ in oils and surfactants was evaluated to identify components of the microemulsion. The ternary diagram was plotted to identify the area of microemulsion existence. Various gelling agents were evaluated for their potential to gel the CMZ microemulsion without affecting its structure. The bioadhesive potential and antifungal activity of the CMZ microemulsion-based gel (CMZ-MBG) was determined in comparison to the marketed clotrimazole gel (Candid-V® gel) by in vitro methods. The chemical stability of CMZ in CMZ-MBG was determined as per the International Conference on Harmonization guidelines. The CMZ microemulsion exhibited globule size of 48.4 nm and polydispersity index of 0.75. Carbopol® ETD 2020 could successfully gel the CMZ microemulsion without disturbing the structure. The CMZ-MBG showed significantly higher (P < 0.05) in vitro bioadhesion and antifungal activity as compared to that of Candid-V® gel. The stability studies indicated that CMZ undergoes acidic pH-catalyzed degradation at all the storage conditions at the end of 3 months.Key words: clotrimazole, microemulsion, microemulsion-based vaginal gel, stability studies, vaginal delivery     

Applying the Taguchi Design for Optimized Formulation of Sustained Release Gliclazide Chitosan Beads: An In Vitro/In Vivo Study

Gliclazide is a second generation of hypoglycemic sulfonylurea and acts selectively on pancreatic β cell to control diabetes mellitus. The objective of this study was to produce a controlled release system of gliclazide using chitosan beads. Chitosan beads were produced by dispersion technique using tripolyphosphate (TPP) as gelating agent. The effects of process variables including chitosan molecular weight, concentration of chitosan and TPP, pH of TPP, and cross-linking time after addition of chitosan were evaluated by Taguchi design on the rate of drug release, mean release time (MRT), release efficiency (RE₈%), and particle size of the beads. The blood glucose lowering effect of the beads was studied in normal and streptozotocin-diabetic rats. The optimized formulation CL₂T₅P₂t₁₀ with about 31% drug loading, 2.4 h MRT, and 69.16% RE₈% decreased blood glucose level in normal rats for 24 h compared to pure powder of gliclazide that lasted for just 10 h.     

In Vitro Bioavailability of Calcium,Magnesium, Iron,Zinc, and Copper from Gluten-Free Breads Supplemented with Natural Additives

The aim of this study was to measure the content of calcium, magnesium, iron, zinc, and copper and determine the bioavailability of these ingredients in gluten-free breads fortified with milk and selected seeds. Due to the increasing prevalence of celiac disease and mineral deficiencies, it has become necessary to produce food with higher nutritional values which maintains the appropriate product characteristics. This study was designed for gluten-free breads fortified with milk and seeds such as flax, poppy, sunflower seeds, pumpkin seeds or nuts, and flour with amaranth. Subsequently, digestion was performed in vitro and the potential bioavailability of the minerals was measured. In the case of calcium, magnesium, iron, and copper, higher bioavailability was observed in rice bread, and, in the case of copper and zinc, in buckwheat bread. This demonstrated a clear increase in bioavailability of all the minerals when the bread were enriched. However, satisfactory results are obtained only for the individual micronutrients.     

Co-Culture of S. epidermidis and Human Osteoblasts on Implant Surfaces: An Advanced In Vitro Model for Implant-Associated Infections

Objectives

Total joint arthroplasty is one of the most frequent and effective surgeries today. However, despite improved surgical techniques, a significant number of implant-associated infections still occur. Suitable in vitro models are needed to test potential approaches to prevent infection. In the present study, we aimed to establish an in vitro co-culture setup of human primary osteoblasts and S. epidermidis to model the onset of implant-associated infections, and to analyze antimicrobial implant surfaces and coatings.

Materials and Methods

For initial surface adhesion, human primary osteoblasts (hOB) were grown for 24 hours on test sample discs made of polystyrene, titanium alloy Ti6Al4V, bone cement PALACOS R^®, and PALACOS R^® loaded with antibiotics. Co-cultures were performed as a single-species infection on the osteoblasts with S. epidermidis (multiplicity of infection of 0.04), and were incubated for 2 and 7 days under aerobic conditions. Planktonic S. epidermidis was quantified by centrifugation and determination of colony-forming units (CFU). The quantification of biofilm-bound S. epidermidis on the test samples was performed by sonication and CFU counting. Quantification of adherent and vital primary osteoblasts on the test samples was performed by trypan-blue staining and counting. Scanning electron microscopy was used for evaluation of topography and composition of the species on the sample surfaces.

Results

After 2 days, we observed approximately 10⁴ CFU/ml biofilm-bound S. epidermidis (10³ CFU/ml initial population) on the antibiotics-loaded bone cement samples in the presence of hOB, while no bacteria were detected without hOB. No biofilm-bound bacteria were detectable after 7 days in either case. Similar levels of planktonic bacteria were observed on day 2 with and without hOB. After 7 days, about 10⁵ CFU/ml planktonic bacteria were present, but only in the absence of hOB. Further, no bacteria were observed within the biofilm, while the number of hOB was decreased to 10% of its initial value compared to 150% in the mono-culture of hOB.

Conclusion

We developed a co-culture setup that serves as a more comprehensive in vitro model for the onset of implant-associated infections and provides a test method for antimicrobial implant materials and coatings. We demonstrate that observations can be made that are unavailable from mono-culture experiments.     

Influence of Estrogens on Copper Indicators: In Vivo and In Vitro Studies

Classic copper indicators are not sensitive and specific for detecting excess copper exposure when this is higher than customary but not markedly elevated. Serum copper and ceruloplasmin (Cp) are the most commonly used indicators to assess nutritional status of copper. The objective of this paper was to study the influence of estrogens on these indicators and others used to assess early effects of excess copper exposure in humans and the expression of a set of copper related proteins in a hepatic cellular model. For the studies in humans, 107 healthy participants (18–50 years) were allocated as follows: group 1 (n = 39), women assessed on day 7 of their hormonal cycle; group 2 (n = 34), women assessed on day 21 of their hormonal cycle, and group 3 (n = 34, comparison group), healthy men. Participants received 8 mg Cu/day (as copper sulfate) during 6 months. Serum Cp and Cu, Cu–Zn–superoxide dismutase activity, liver function indicators [aspartate aminotransferase (AST), alanine aminotransferase (ALT), and gamma glutamyltransferase (GGT)], and serum Fe and Zn concentrations were measured monthly. In addition, the influence of estradiol on intracellular total copper content, hctr1, dmt1 and shbg mRNA abundance and hCTR1, and DMT1 expression was measured in HepG2 cells. Serum Cu, Fe, and Zn and liver aminotransferases but not Cu–Zn–superoxide dismutase varied depending on sex. Fe nutrition indicators, GGT, and ALT activities showed significant differences between the hormonal phases. Cellular experiments showed that estradiol increased cellular Cu concentration and hCTR1 and DMT1 mRNA expression and changed these proteins expression patterns. Estradiols significantly influence the responses to copper at the whole body and the cellular levels, suggesting that they help maintaining copper availability for metabolic needs.     

Bioadhesive Microspheres for Bioavailability Enhancement of Raloxifene Hydrochloride: Formulation and Pharmacokinetic Evaluation

Raloxifene hydrochloride (R-HCl), a BCS class II drug, remains a mainstay in the prevention and pharmacologic therapy of osteoporosis. Its absolute bioavailability, however, is 2% due to poor solubility and extensive first pass metabolism. The present study describes two simultaneous approaches to improve its bioavailability, complexation of R-HCl with cyclodextrin(s), and formulation of mucoadhesive microspheres of the complex using different proportions of carbopol and HPMC. Microspheres were pale yellow in color, free-flowing, spherical, and porous in outline. The particle size ranged between 3 and 15 μm, and entrapment efficiency was found to be within 81.63% to 87.73%. A significant improvement in the solubility of R-HCl was observed, and it differed with the combination of excipients used. X-ray diffraction and differential scanning calorimetry studies revealed that enhancement in drug solubility was resulted due to a change in its crystallinity within the formulation. Microspheres possessed remarkable mucoadhesion and offered controlled drug release, lasting up to 24 h. They produced a sharp plasma concentration–time profile of R-HCl within 30 min post-administration to Wistar rats. [AUC]_0–24 h was found to be 1,722.34 ng h/ml, and it differed significantly to that of pure drug powder (318.28 ng h/ml). More than fivefold increase in AUC and more than twofold increase in MRT were observed. FT-IR studies evidenced no interaction among drug and excipients. The results of this study showed that mucoadhesive microspheres could be a viable approach to improve the pharmacokinetic profile of R-HCl.     

Antioxidant Activity of a New Xanthone Derivative from Aspidistra Letreae: In Vitro and In Silico Studies

A new xanthone derivative, aspidxanthone A ( 1 ), and three known compounds ((2S)-1-(β-D-galactopyranosyloxy)-3-(hexadecanoyloxy)propan-2-yl (9Z,12Z)-octadeca-9,12-dienoate ( 2 ), (25S)-spirostane-1β,3α,5β-triol ( 3 ), and asparenyldiol ( 4 )) were isolated from the whole of the endemic species Aspidistra letreae in Vietnam. Their structures were elucidated by means of extensive spectroscopic analyses and comparison with published data. In this study, we report the isolation and structure elucidation of a new compound aspidxanthone A, antioxidant activities of the extract and isolates 1 – 4 , and in silico molecular docking of aspidxanthone A. The ethyl acetate extract had good antioxidant activity with an IC₅₀ value of 26.3 μg mL⁻¹. Among the isolates, aspidxanthone A exhibited DPPH reduction activity with an IC₅₀ value of 11.2 μM, which is in the same range as that of the positive control, ascorbic acid. The mechanism of action of aspidxanthone A on the tyrosinase and xanthine oxidase proteins have been clarified by in silico studies.     

Evaluation of Paeonol Skin-Target Delivery from Its Microsponge Formulation: In Vitro Skin Permeation and In Vivo Microdialysis

The aim of the present study was to design a novel topical skin-target drug-delivery system, the paeonol microsponge, and to investigate its drug-release patterns in dosage form, both in vitro and in vivo. Paeonol microsponges were prepared using the quasi-emulsion solvent-diffusion method. In vitro release studies were carried out using Franz diffusion cells, while in vivo studies were investigated by microdialysis after the paeonol microsponges were incorporated into a cream base. In vitro release studies showed that the drug delivered via microsponges increased the paeonol permeation rate. Ex vivo drug-deposition studies showed that the microsponge formulation improved drug residence in skin. In addition, in vivo microdialysis showed that the values for the area under the concentration versus time curve (AUC) for the paeonol microsponge cream was much higher than that of paeonol cream without microsponges. Maximum time (T_max) was 220 min for paeonol microsponge cream and 480 min for paeonol cream, while the half-life (t_1/2) of paeonol microsponge cream (935.1 min) was almost twice that of paeonol cream (548.6 min) in the skin (n = 3). Meanwhile, in the plasma, the AUC value for paeonol microsponge cream was half that of the paeonol cream. Based on these results, paeonol-loaded microsponge formulations could be a better alternative for treating skin disease, as the formulation increases drug bioavailability by lengthening the time of drug residence in the skin and should reduce side-effects because of the lower levels of paeonol moving into the circulation.     

Lyophilized Sustained Release Mucoadhesive Chitosan Sponges for Buccal Buspirone Hydrochloride Delivery: Formulation and In Vitro Evaluation

This work aims to prepare sustained release buccal mucoadhesive lyophilized chitosan sponges of buspirone hydrochloride (BH) to improve its systemic bioavailability. Chitosan sponges were prepared using simple casting/freeze-drying technique according to 3² factorial design where chitosan grade was set at three levels (low, medium, and high molecular weight), and concentration of chitosan solution at three levels (0.5, 1, and 2%). Mucoadhesion force, ex vivo mucoadhesion time, percent BH released after 8 h (Q8h), and time for release of 50% BH (T_50%) were chosen as dependent variables. Additional BH cup and core buccal chitosan sponge were prepared to achieve uni-directional BH release toward the buccal mucosa. Sponges were evaluated in terms of drug content, surface pH, scanning electron microscopy, swelling index, mucoadhesion strength, ex vivo mucoadhesion time, and in vitro drug release. Cup and core sponge (HCH 0.5E) were able to adhere to the buccal mucosa for 8 h. It showed Q8h of 68.89% and exhibited a uni-directional drug release profile following Higuchi diffusion model.KEY WORDS: buspirone HCL, casting/freeze-drying technique, chitosan, cup and core sponge, mucoadhesive buccal sponges     

Cardioprotective Properties of Omentin-1 in Type 2 Diabetes: Evidence from Clinical and In Vitro Studies

Context

Adipokines are linked to the development of cardiovascular dysfunction in type 2 diabetes (DM2). In DM2-patients, circulating levels of omentin-1, an adipokine preferentially expressed in epicardial adipose tissue, are decreased. This study investigated whether omentin-1 has a cardioprotective function.

Methods

Omentin-1 levels in plasma and cardiac fat depots were determined in DM2-patients versus controls. Moreover, the relation between omentin-1 levels and cardiac function was examined in men with uncomplicated DM2. Finally, we determined whether omentin-1 could reverse the induction of cardiomyocyte dysfunction by conditioned media derived from epicardial adipose tissue from patients with DM2.

Results

Omentin-1 was highly expressed and secreted by epicardial adipose tissue, and reduced in DM2. Circulating omentin-1 levels were lower in DM2 versus controls, and positively correlated with the diastolic parameters early peak filling rate, early deceleration peak and early deceleration mean (all P<0.05). The improved diastolic function following pioglitazone treatment associated with increases in omentin-1 levels (P<0.05). In vitro, exposure of cardiomyocytes to conditioned media derived from epicardial adipose tissue from patients with DM2 induced contractile dysfunction and insulin resistance, which was prevented by the addition of recombinant omentin.

Conclusion

These data identify omentin-1 as a cardioprotective adipokine, and indicate that decreases in omentin-1 levels could contribute to the induction of cardiovascular dysfunction in DM2.     

Acetazolamide Inhibits the Level of Tyrosinase and Melanin: An Enzyme Kinetic,In Vitro,In Vivo,and In Silico Studies

Melanin is the major factor that determines skin color and protects from ultraviolet radiation. In present study we evaluated the anti‐melanogenesis effect of acetazolamide (ACZ) using four different approaches: enzyme kinetic, in vitro, in vivo and in silico. ACZ demonstrated significant inhibitory activity (IC₅₀ 7.895 ± 0.24 μm ) against tyrosinase as compared to the standard drug kojic acid (IC₅₀ 16.84 ± 0.64 μm ) and kinetic analyses showed that ACZ is a non‐competitive inhibitor without cytotoxic effect. In in vitro experiments, A375 human melanoma cells were treated with 20 or 40 μm of ACZ with or without 50 μm of l ‐DOPA. Western blot results showed that ACZ significantly (P < 0.05) decreased the expression level of tyrosinase at 40 μm . Zebrafish embryos were treated with 10, 20 or 40 μm of ACZ and of positive control kojic acid. At 72 h of treatment with ACZ and kojic acid, ACZ significantly (P < 0.001) decreased the embryos pigmentation to 40.8% of untreated embryos at the dose of 40 μm of ACZ while kojic acid decreased only 25.0% of pigmentation at the same dose of kojic acid. In silico docking were performed against tyrosinase using PyRx tool. Docking studies suggested that His244, Asn260 and His85 are the major interacting residues in the binding site of the protein. In conclusion, our results suggest that ACZ is a good candidate for the inhibition of melanin and it could be used as a lead for developing the drugs for hyperpigmentary disorders and skin whitening.     

Analysis and Optimization of the Cationic Lipid Component of a Lipid/Peptide Vector Formulation for Enhanced Transfection In Vitro and In Vivo

We have previously described a lipopolyplex formulation comprising a mixture of a cationic peptide with an integrin-targeting motif (K₁₆GACRRETAWACG) and Lipofectin^®, a liposome consisting of DOTMA and DOPE in a 1:1 ratio. The high transfection efficiency of the mixture involved a synergistic interaction between the lipid/peptide components. The aim of this study was to substitute the lipid component of the lipopolyplex to optimize transfection further and to seek information on the structure-activity relationship of the lipids in the lipopolyplex. Symmetrical cationic lipids with diether linkages that varied in alkyl chain length were formulated into liposomes and then incorporated into a lipopolyplex by mixing with an integrin-targeting peptide and plasmid DNA. Luciferase transfections were performed of airway epithelial cells and fibroblasts in vitro and murine lung airways in vivo. The biophysical properties of lipid structures and liposome formulations and their potential effects on bilayer membrane fluidity were determined by differential scanning calorimetry and calcein-release assays. Shortening the alkyl tail from C18 to C16 or C14 enhanced lipopolyplex and lipoplex transfection in vitro but with differing effects. The addition of DOPE enhanced transfection when formulated into liposomes with saturated lipids but was more variable in its effects with unsaturated lipids. A substantial improvement in transfection efficacy was seen in murine lung transfection with unsaturated lipids with 16 carbon alkyl tails. The optimal liposome components of lipopolyplex and lipoplex vary and represent a likely compromise between their differing structural and functional requirements for complex formation and endosomal membrane destabilization.     

Controlled Release of Dutasteride from Biodegradable Microspheres: In Vitro and In Vivo Studies

The aim of the present work was to study the in vitro/in vivo characteristics of dutasteride loaded biodegradable microspheres designed for sustained release of dutasteride over four weeks. An O/W emulsion-solvent evaporation method was used to incorporate dutasteride, which is of interest in the treatment of benign prostatic hyperplasia (BPH), into poly(lactide-co-glycolide) (PLGA). A response surface method (RSM) with central composite design (CCD) was employed to optimize the formulation variables. A prolonged in vitro drug release profile was observed, with a complete release of the entrapped drug within 28 days. The pharmacokinetics study showed sustained plasma drug concentration-time profile of dutasteride loaded microspheres after subcutaneous injection into rats. The in vitro drug release in rats correlated well with the in vivo pharmacokinetics profile. The pharmacodynamics evaluated by determination of the BPH inhibition in the rat models also showed a prolonged pharmacological response. These results suggest the potential use of dutasteride loaded biodegradable microspheres for the management of BPH over long periods.     

Two-dimensional Fast Surface Imaging Using a Handheld Optical Device: In Vitro and In Vivo Fluorescence Studies

Near-infrared (NIR) optical imaging is a noninvasive and nonionizing modality that is emerging as a diagnostic tool for breast cancer. The handheld optical devices developed to date using the NIR technology are predominantly developed for spectroscopic applications. A novel handheld probe-based optical imaging device has been recently developed toward area imaging and tomography applications. The three-dimensional (3D) tomographic imaging capabilities of the device have been demonstrated from previous fluorescence studies on tissue phantoms. In the current work, fluorescence imaging studies are performed on tissue phantoms, in vitro, and in vivo tissue models to demonstrate the fast two-dimensional (2D) surface imaging capabilities of this flexible handheld-based optical imaging device, toward clinical breast imaging studies. Preliminary experiments were performed using target(s) of varying volume (0.23 and 0.45 cm³) and depth (1–2 cm), using indocyanine green as the fluorescence contrast agent in liquid phantom, in vitro, and in vivo tissue models. The feasibility of fast 2D surface imaging (∼5 seconds) over large surface areas of 36 cm² was demonstrated from various tissue models. The surface images could differentiate the target(s) from the background, allowing a rough estimate of the target''s location before extensive 3D tomographic analysis (future studies).