A new losartan [2-butyl-5-chloro-3-[[4-[2-(2H-tetrazol-5-yl)phenyl]phenyl]methyl]imidazol-4-yl]methanol zinc(II) complex [Zn(Los)Cl], was synthesized and characterized. The crystal structure was determined by x-ray diffraction methods. When aqueous solutions of the ligand and the metal were mixed, the known and more soluble powder [Zn(Los)2].3H2O (ZnLos) complex has been obtained. The interactions with phosphatases showed a concerted mechanism displayed by the Zn ions and ZnLos up to 500 μM concentration: a decrease of the acid phosphatase (AcP) associated with an increase in the alkaline phosphatase (ALP) activities. The complex and ZnSO4 showed a cytotoxic behavior on human lung A549 cancer cell line at concentrations higher than 75 μM with reactive oxygen species (ROS) generation and GSH (and GSH/GSSG ratio) depletion. Apoptotic cells were observed using terminal deoxynucleotidyl transferase dUTP nick-end labeling (TUNEL) method, a mechanism accompanied by upregulation of BAX protein, downregulation of Bcl-XL and release of caspase-3. The BAX/Bcl-XL ratio was found to be significantly higher in cells exposure to ZnLos than cells treated with ZnSO4, in agreement with the higher apoptotic percentage of cells found for the complex. Cell death was found to be produced by apoptosis and no necrosis has been observed. On the contrary, losartan exerted low effects on phosphatases, produced some reduction of cancer cell viability (concentrations >?250 μM, number of apoptotic cells similar to the basal) with low ROS depletion, without alteration of the GSH/GSSG and low BAX/Bcl-XL ratios. In the MRC-5, normal lung fibroblasts cell line only ZnSO4 at concentrations higher than 200 μM displays cytotoxic effects.
Graphical abstract Interaction of Zn with losartan. Activation of intrinsic apoptotic signaling pathway in lung cancer cells and effects on alkaline and acid phosphatases
Development of new energetic salts is the key factor in replacing low performance compounds in conventional formulations of high explosives as well as propellants. Ten salts based on the nitroformate anion and various nitrogen-rich cations were designed and their geometric optimizations carried out using the density functional method. With reasonable oxygen balance (from ?36 % to 0 %), heats of formation (47–624 kJ mol?1) and high densities (1.81–1.89 g cm?3), the detonation velocity (D) and pressure (P) values of salts were calculated as 8.62–9.36 km s?1 and 33.10–40.01 GPa, respectively. Lastly, the nitroformate salts studied in this work are of prospective interest as high performance explosives.
Tea is the second most commonly consumed beverage in the world. It is well recognized that the consumption of tea in high quantities can promote the development of fluorosis. The main objective of this study is to estimate the exposure to fluoride in the Azores through drinking tea prepared with water from different volcanic locations, by i) investigating the fluoride (F) content of various commercial brands of tea (Camellia sinensis) marketed in Azores and ii) comparing tea releasing rates of F according to brewing time, considering the fluoride concentration in the different types of water used for the infusion. Fluoride contents were determined by ion-selective electrode in 30 samples of drinking water from three different locations and in 450 samples of tea (black and green tea) from three different brands. Fluoride concentration in water ranged from 0.29 to 1.56 ppm (Porto Formoso and Sete Cidades village, respectively). Fluoride concentrations increased with brewing time, reaching the highest values in the Azorean black and green tea infusions. For all the studied brands, a negative correlation was found between tea fluoride contents and the pH of the water used to prepare the infusion. Fluoride concentration in infusions was significantly associated with the background fluoride concentration in drinking water. Since the fluoride concentration in groundwater varies accordingly to the geological conditions and tea consumption can contribute to fluoride intake, it is important to define the limits for tea consumption, particularly in fluoride-rich areas.
Graphical Abstract Fluoride concentrations in black and green tea for 3 minutes of brewing time and, association between fluoride concentration and pH with brewing time
This study aimed to investigate the in vitro damage induced by ochratoxin A (OTA) in BME-UV1 and MDCK epithelial cells. Both cells lines were treated with OTA (0 up to 10 μg/mL), and cell viability (MTT assay), membrane stability (lactate dehydrogenase (LDH) release assay) and apoptotic cell rate (Tunel assay) were investigated. Further, the effect of the incubation with OTA has been evaluated at DNA level by the determination of DNA integrity, by the quantification of DNA adduct formation (8-hydroxy-2′-deoxyguanosine (8-OHdG)) and by the assessment of the global DNA methylation status (5-methyl-cytosine (5-mC)). The obtained results showed that after 24 h of OTA treatment, BME-UV1 cell viability was reduced in a dose-dependent way. OTA significantly (P?<?0.05) increased LDH release in BME-UV1 cells at all concentrations tested. OTA (1.25 μg/mL) induced 35 % LDH release in MDCK cells (P?<?0.05). A significant (P?<?0.05) change in percentages of apoptotic BME-UV1 (10?±?0.86) and MDCK (25?±?0.88) cells was calculated when the cells were co-incubated with OTA. The level of 8-OHdG adduct formation was significantly (P?<?0.05) increased in BME-UV1 cells treated with 1.25 μg/mL of OTA. The results of the present study suggest that a different mechanism of action may occur in these cell lines.
To improve the efficiency of reactions of β-glucuronidase (GUS)-assisted glucuronic acid (GluA) removal within a microfluidic system.
Results
β-glucuronidase from Helix pomatia was immobilised and characterised in silica-based sol–gel monoliths. Efficiency of the GUS-doped silica monoliths was tested for hydrolysis of p-Nitrophenyl-β-d-glucuronide (pNP–GluA) in both ml-scaled medium via batch reactions and microfluidic environment via continuous-flow reactions. In the microfluidic platform, within a duration of 150 min of continuous operation (flow rate: 1 µL/min), the obtained highest pNP yield was almost 50% higher than that of the corresponding batchwise reaction. However, increased flow rates (3, 5, and 10 µL/min) resulted in lower conversion yields compared to 1 µL/min. The microfluidic platform demonstrated continuous hydrolytic activity for 7 days with considerable reaction yields while using a small amount of the enzyme.
Conclusion
These results revealed that usage of the microreactors has considerable potential to efficiently obtain bioactive GluA-free aglycons from various plant-derived β-glucuronides for pharmaceutical applications.
We report nanomicelles of amphotericin B (AmB) using various molar ratios of AmB and sodium deoxycholate sulfate (SDCS) for inhalation with improved stability, solubility, bioactivity, and safety. The particle sizes of all aerosolized formulations are expressed as mass median aerodynamic diameter (0.9–1.6 μm), fine particle fraction (70.3–86.5%), and geometric standard deviation (1.4–2.1) which indicated their sizes are appropriate for use as an inhaler. In vitro cytotoxicity studies conducted using respiratory and kidney cell lines demonstrated that the marketed Fungizone® was toxic to macrophage and embryonic kidney cells and cell viability decreased from 96 to 48% and from 97 to 67%, respectively when the AmB equivalent concentration was increased from 1 to 16 μg/mL. However, AmB-SDCS formulations showed no evidence of toxicity even up to 8 μg/mL compared to Fungizone®. Minimum inhibitory and fungicidal concentrations were significantly reduced against Cryptococcus neoformans, and Candida albicans. Also, antileishmanial activity significantly improved for AmB-SDCS formulations. There was an evidence of phagocytosis of the AmB-SDCS formulation by alveolar macrophages NR 8383. Molecular modeling studies suggested the role of hydrogen bonding in stabilization of the AmB-SDCS complex. This study indicated that AmB-SDCS nanomicelles can be used to design a safe and cost-effective AmB for inhalation.
A new compound based on the D-π-A concept, where D = dimethylamino-phenyl and A = naphthoic acid, separated by an imine motif, was designed, synthesized and characterized. The spectral, energetics, and structural characteristics of the compound were studied thoroughly theoretically by density functional theory (DFT) in the gas and aqueous phases and experimentally (steady-state absorption) in aqueous media with various degrees of polarity and hydrogen bonding ability. This compound shows high sensitivity to the polarity, basicity and proton affinity of the environment. Based on DFT, TD-DFT and NBO analysis, the compound exists in the ground-state with both intermolecular and intramolecular hydrogen bond conformations in association with the –COOH, with latter isomer calculated to be more stable. Furthermore, structural changes via intermolecular solute–solvent interactions, dictate electronic modifications and spectral changes.
Spin-polarized first-principles total-energy calculations have been performed to investigate the possible chain reaction of acetylene molecules mediated by hydrogen abstraction on hydrogenated hexagonal boron nitride monolayers. Calculations have been done within the periodic density functional theory (DFT), employing the PBE exchange correlation potential, with van der Waals corrections (vdW-DF). Reactions at two different sites have been considered: hydrogen vacancies on top of boron and on top of nitrogen atoms. As previously calculated, at the intermediate state of the reaction, when the acetylene molecule is attached to the surface, the adsorption energy is of the order of ?0.82 eV and ?0.20 eV (measured with respect to the energy of the non interacting molecule-substrate system) for adsorption on top of boron and nitrogen atoms, respectively. After the hydrogen abstraction takes place, the system gains additional energy, resulting in adsorption energies of ?1.52 eV and ?1.30 eV, respectively. These results suggest that the chain reaction is energetically favorable. The calculated minimum energy path (MEP) for hydrogen abstraction shows very small energy barriers of the order of 5 meV and 22 meV for the reaction on top of boron and nitrogen atoms, respectively. Finally, the density of states (DOS) evolution study helps to understand the chain reaction mechanism.
Vascular dementia (VaD) is a degenerative cerebrovascular disorder that leads to progressive decline in cognitive abilities and memory. Several reports demonstrated that oxidative stress and endothelial dysfunction are principal pathogenic factors in VaD. The present study was constructed to determine the possible neuroprotective effects of simvastatin in comparison with cilostazol in VaD induced by l-methionine in rats. Male Wistar rats were divided into four groups. Group I (control group), group II received l-methionine (1.7 g/kg, p.o.) for 32 days. The remaining two groups received simvastatin (50 mg/kg, p.o.) and cilostazol (100 mg/kg, p.o.), respectively, for 32 days after induction of VaD by l-methionine. Subsequently, rats were tested for cognitive performance using Morris water maze test then sacrificed for biochemical and histopathological assays. l-methionine induced VaD reflected by alterations in rats’ behavior as well as the estimated neurotransmitters, acetylcholinesterase activity as well as increased brain oxidative stress and inflammation parallel to histopathological changes in brain tissue. Treatment of rats with simvastatin ameliorated l-methionine-induced behavioral, neurochemical, and histological changes in a manner comparable to cilostazol. Simvastatin may be regarded as a potential therapeutic strategy for the treatment of VaD. To the best of our knowledge, this is the first study to reveal the neuroprotective effects of simvastatin or cilostazol in l-methionine-induced VaD.
This work reports a detailed DFT study on the generation of trimethylenemethanes (TMMs) from the ring opening of dialkoxymethylenecyclopropane (DMCP), methylenecyclopropanethioacetal (MCPT), and substituted derivatives of DMCP and MCPT, as well as follow-up reactions of the TMMs. The singlet DMCP and MCPT were found to be 51.32 and 53.77 kcal mol?1 more stable than the triplet DMCP and MCPT respectively, corresponding to triplet:singlet population ratios of 1:1038 and 1:1040, respectively, at 25 °C using Boltzmann distribution, implying that the proportion of the triplet species is negligible at 25 °C. The ring-opening reactions occur through singlet transition states with barriers of 40.68 and 42.27 kcal mol?1 for DMCP and MCPT, respectively, and yield TMMs that are very unstable compared to the precursors, with the triplet TMM being far more stable than the singlet. Whereas the singlet TMMs readily undergo cycloaddition reactions with olefins to form five-membered carbocyclic rings, the triplet species do not. The selectivity of the reactions of the DMCP TMMs is very sensitive to temperature; at 25°C, cycloaddition with olefins and ring-closure to form ketenes have very comparable barriers while temperatures above 150 °C favor the exclusive formation of a ketene followed by dimerization. In MCPT, ring closure to form ketenes is the favored reaction at all temperatures studied.
The electric dipole transitions between pure spin and mixed spin electronic states are calculated at the XMC-QDPT2 and MCSCF levels of theory, respectively, for different intermolecular distances of the C6H6 and O2 collisional complex. The magnetic dipole transition moment between the mixed-spin ground (“triplet”) and the first excited (“singlet”) states is calculated by quadratic response at MCSCF level of theory. The obtained results confirm the theory of intensity borrowing and increasing the intensity of electronic transitions in the C6H6?+?O2 collision. The calculation of magnetically induced current density is performed for benzene molecule being in contact with O2 at the distances from 3.5 to 4.5 Å. The calculation shows that the aromaticity of benzene is rising due to the conjugation of π-MOs of both molecules. The C6H6?+?O2 complex becomes nonaromatic at the short distances (r?<?3.5 Å). The computation of static polarizability in the excited electronic states of the C6H6?+?O2 collisional complex at various distances supports the theory of red solvatochromic shift of the a?→?X band.
The chemical sensitivity of urine metabolomics analysis is greatly compromised due to the large amounts of inorganic salts in urine (NaCl, KCl), which are detrimental to analytical instrumentation, e.g. chromatographic columns or mass spectrometers. Traditional desalting approaches applied to urine pretreatment suffer from the chemical losses, which reduce the information depth of analysis.
Objectives
We aimed to test a simple approach for the simultaneous preconcentration and desalting of organic solutes in urine based on the collection of induced bursting bubble aerosols above the surface of urine samples.
Method
Bursting bubbles were generated at ambient conditions by feeding gas through an air diffuser at the bottom of diluted (200 times in ultrapure water) urine solution (50–500 mL). Collected aerosols were analyzed by the direct-infusion electrospray ionization mass spectrometry (ESI–MS).
Results
The simultaneous preconcentration (ca. 6–12 fold) and desalting (ca. six–tenfold) of organic solutes in urine was achieved by the bursting bubble sample pretreatment, which allowed ca. three-times higher number of identified urine metabolites by high-resolution MS analysis. No chemical losses due to bubbling were observed. The increased degree of MS data clustering was demonstrated on the principal component analysis of data sets from the urine of healthy people and from the urine people with renal insufficiency. At least ten times higher sensitivity of trace drug detection in urine was demonstrated for clenbuterol and salbutamol.
Conclusion
Our results indicate the high versatility of bubble bursting as a simple pretreatment approach to enhance the chemical depth and sensitivity of urine analysis. The approach could be attractive for personalized medicine as well as for the diagnostics of renal disorders of different etiology (diabetic nephropathy, chronic renal failure, transplant-associated complications, oncological disorders).
Graphical Abstract
Urine desalting and preconcentration in bursting bubbles.
We aimed to identify new high-yield dextranase strains and study the catalytic potential of dextranase from the strain in industrial applications.
Results
Dextranase-producing strains were screened from soil samples, and a potential strain was identified as Chaetomium globosum according to its phenotype, biochemical characteristics, and rDNA analysis. Crude dextranase was purified to reach 10.97-fold specific activity and 18.7% recovery. The molecular weight of the enzyme was 53 kDa with an optimum temperature and pH of 60 °C and 5.5, respectively. Enzyme activity was stable at pH 4.0–7.0 and displayed sufficient thermal stability at temperatures?<?50 °C. Mn2+ (10 mM) enhanced dextranase activity by 134.44%. The enzyme was identified as an endodextranase. It displayed very high hydrolytic affinity toward high-molecular weight dextran T2000, reaching 97.9% hydrolysis within 15 min at 2 U/mL.
Conclusion
Collectively, these results suggest that Chaetomium globosum shows higher production and specificity of dextranase than that from other reported strains. These findings may offer new insights into the potential of dextranase in the sugar, medical, and food industries.
The nucleation, ice crystal shapes and thermodynamic stability of polar stratospheric clouds particles are interesting concerns owing to their implication in the ozone layer destruction. Some of these particles are formed by conformers of H2O, HNO3, and H2SO4. We carried out calculations using density functional theory (DFT) to obtain optimized structures. Several stable trimers are achieved —divided in two groups, one with HNO3 moiety, second with H2SO4 moiety— after pre-optimization at B3LYP/6-31G and subsequently optimization at B3LYP/aug-cc-pVTZ level of theory. For both most stable conformers five H2O molecules are added to their optimized trimers to calculate hydrated geometries. The OH stretching harmonic frequencies are provided for all aggregates. The zero-point energy correction (ZEPC), relative electronic energies (?E), relative reaction Gibbs free energies ?(?G)k-relative, and cooling constant (Kcooling) are reported at three temperatures: 188 K, 195 K, and 210 K. Shapes given in our calculations are compared with various experimental shapes as well as comparisons with their thermo-stabilities.
Graphical Abstract Facet shapes and thermo-stabilities of H2SO4?HNO3 hydrates involved in polar stratospheric clouds. IR spectrum of WNS-1+5W structure and its circular facet
In the present study, the effect of nanosized graphene oxide layer on thermal stability and biocompatibility of gold nanorods has been examined. The graphene oxide-wrapped gold nanorods were prepared by electrostatic interaction between negatively charged graphene oxide and positively charged nanorods. The resulting nanohybrids were then heated at different time intervals to 95 °C in a water bath to assess the effect of heat on the rods morphology. The structural changes in gold nanorods were monitored via UV-Vis spectroscopy measurements and transmission electron microscopy images. In similar experiments, the graphene oxide used to wrap gold nanorods was reduced by ascorbic acid in a 95 °C water bath. Our results indicate that while bare gold nanorods are highly vulnerable to elevated temperatures, graphene oxide and reduced graphene oxide-coated gold nanorods remain thermally stable with no structural changes. We also confirmed that the enhanced thermal stability is highly dependent on the concentration of deposited graphene oxide available on the surface of the gold nanorods. In addition, we performed an MTT (3-[4,5-dimethylthiazol-2yl]-2,5-diphenyltetrazoliumbromide) assay to make a comparison between the cytotoxicity of the nanohybrids and their primary building blocks on human dermal fibroblast cells as a normal cell line. We found evidence that graphene oxide can enhance the biocompatibility of the rods through covering toxic chemicals on the surface of them.
Performance of 18 DFT functionals (B1B95, B3LYP, B3PW91, B97D, BHandHLYP, BMK, CAM-B3LYP, HSEh1PBE, M06-L, mPW1PW91, O3LYP, OLYP, OPBE, PBE1PBE, tHCTHhyb, TPSSh, wB97xD, VSXC) in combinations with six basis sets (cc-pVDZ, aug-cc-pVDZ, cc-pVTZ, aug-cc-pVTZ, IGLO-II, and IGLO-III) and three methods for calculating magnetic shieldings (GIAO, CSGT, IGAIM) was tested for predicting 1H and 13C chemical shifts for 25 organic compounds, for altogether 86 H and 88 C atoms. Proton shifts varied between 1.03 ppm to 12.00 ppm and carbon shifts between 7.87 ppm to 209.28 ppm. It was found that the best method for calculating 13C shifts is PBE1PBE/aug-cc-pVDZ with CSGT or IGAIM approaches (mae?=?1.66 ppm), for 1H the best results were obtained with HSEh1PBE, mPW1PW91, PBE1PBE, CAM-B3LYP, and B3PW91 functionals with cc-pVTZ basis set and with CSGT or IGAIM approaches (mae?=?0.28 ppm). We found that often larger basis sets do not give better results for chemical shifts. The best basis sets for calculating 1H and 13C chemical shifts were cc-pVTZ and aug-cc-pVDZ, respectively. CSGT and IGAIM NMR approaches can perform really well and are in most cases better than popular GIAO approach.
Graphical Abstract Mean absolute errors for 1H and 13C chemical shifts and computational times of neutral toluene molecule with aug-cc-pVDZ basis set and CSGT approach
The characterization of the seleno-sulfide-bromo systems and the isomerization process on the [H, S, Se, Br] potential energy surface were investigated using state-of-the-art theoretical methods. The CCSD(T) and the MP2 levels of theory were employed along with the series of correlation consistent basis sets extrapolated to the complete basis set (CBS) limit in the optimization of the geometrical parameters and computation of electronic energies. The relative stability, in kcal mol?1, at the CCSD(T)/CBS follows the trend: HSSeBr (0) > HSeSBr (9.51) > SSeHBr (24.02) > SeSHBr (25.42). This order was observed in the previous study of the [H, S, Se, Cl] species. The structural parameters and vibrational frequencies of the [H, S, Se, Br] species are reported. This research work should be helpful to experimentalists in order to gain insights into these novel heteroatom molecules.
Graphical abstract Relative energy profile (in kcal mol?1) using the CCSD(T)/CBS and MP2/CBS (in parentheses) method of the stationary states on the [H, S, Se, Br] PES.
Centella asiatica (L.) Urban is a highly considered medicinal plant owing to its secondary metabolites asiaticoside, madecassoside, asiatic acid, and madecassic acid. The asiaticoside, one of the most important constituents of the plant, is a triterpenoid saponin having memory enhancement property. Given its medicinal properties, we isolated and characterized endophytic fungi from this plant with the aim to screen these microorganisms for asiaticoside production. In total, we isolated 13 endophytic fungi from the leaves of the plant, out of which one of the isolates produced asiaticoside. This asiaticoside producing isolate was identified as Colletotrichum gloeosporioides by internal transcribed spacer-based rDNA sequencing. The presence of asiaticoside in ethyl acetate extract of C. gloeosporioides was confirmed by LC–MS. The production of asiaticoside measured in relation to incubation time and subculture generation revealed presence of 62.29?±?3.36 µg/100 mL of asiaticoside by C. gloeosporioides on the 15th day in first subculture generation followed by a decrease in subsequent generations. A similar trend was also shown by yield and growth curve of C. gloeosporioides. The asiaticoside production and yield were found to be positively correlated. This paper reported the production of asiaticoside by an endophytic fungus C. gloeosporioides for the first time. The present findings definitely provide an impetus to the production of asiaticoside by utilizing the endophytic source.
Efficient design of ionic compounds requires a systematic understanding of cation–anion interactions. Weakening of electrostatic attraction is essential to increase the liquid range of the ionic compound and decrease its melting point. Here, we report simulations of the closest-approach cation–anion distances in a variety of ion pairs containing the tetrakis(pentafluorophenyl)borate (TFPB–) anion. Small alkali cations (Li+, Na+) penetrate the TFPB– core, whereas K+ and larger organic cations do not. In the latter case, the shortest possible distance from the cations to the boron atom of TFPB– ranges from 0.50 nm to 0.63 nm. TFPB– was shown to be substantially rigid, providing a steric hindrance to thermodynamically efficient cation–anion coordination. Our results prove that TFPB– is more efficient for electrostatic charge confinement than the tetraoctylammonium cation, whereas the perfluorophenyl group is more efficient than linear alkyl chains. These simulations will motivate development of TFPB–-based ionic liquids with low phase transition points.
Thirteen X-ray crystal structures containing various non-covalent interactions such as halogen bonds, halogen–halogen contacts and hydrogen bonds (I?N, I?F, I?I, F?F, I?H and F?H) were considered and investigated using the DFT-D3 method (B97D/def2-QZVP). The interaction energies were calculated at MO62X/def2-QZVP and MP2/aug-cc-pvDZ level of theories. The higher interaction and dispersion energies (2nd crystal) of ?9.58 kcal mol?1 and ?7.10 kcal mol?1 observed for 1,4-di-iodotetrafluorobenzene bis [bis (2-phenylethyl) sulfoxide] structure indicates the most stable geometrical arrangement in the crystal packing. The electrostatic potential values calculated for all crystal structures have a positive σ-hole, which aids understanding of the nature of σ-hole bonds. The significance of the existence of halogen bonds in crystal packing environments was authenticated by replacing iodine atoms by bromine and chlorine atoms. Nucleus independent chemical shift analysis reported on the resonance contribution to the interaction energies of halogen bonds and halogen–halogen contacts. Hirshfeld surface analysis and topological analysis (atoms in molecules) were carried out to analyze the occurrence and strength of all non-covalent interactions. These analyses revealed that halogen bond interactions were more dominant than hydrogen bonding interactions in these crystal structures.
Graphical Abstract Molecluar structure of 1,4-Di-iodotetrafluorobenzene bis(thianthrene 5-oxide) moelcule and its corresponding molecular electrostatic potential map for the view of σ-hole.
