Phytosterol content and the campesterol:sitosterol ratio influence cotton fiber development: role of phytosterols in cell elongation

Phytosterols play an important role in plant growth and development, including cell division, cell elongation, embryogenesis, cellulose biosynthesis, and cell wall formation. Cotton fiber, which undergoes synchronous cell elongation and a large amount of cellulose synthesis, is an ideal model for the study of plant cell elongation and cell wall biogenesis. The role of phytosterols in fiber growth was investigated by treating the fibers with tridemorph, a sterol biosynthetic inhibitor. The inhibition of phytosterol biosynthesis resulted in an apparent suppression of fiber elongation in vitro or in planta. The determination of phytosterol quantity indicated that sitosterol and campesterol were the major phytosterols in cotton fibers; moreover, higher concentrations of these phytosterols were observed during the period of rapid elongation of fibers. Furthermore, the decrease and increase in campesterol:sitosterol ratio was associated with the increase and decease in speed of elongation, respectively, during the elongation stage. The increase in the ratio was associated with the transition from cell elongation to secondary cell wall synthesis. In addition, a number of phytosterol biosynthetic genes were down-regulated in the short fibers of ligon lintless-1 mutant, compared to its near-isogenic wild-type TM-1. These results demonstrated that phytosterols play a crucial role in cotton fiber development, and particularly in fiber elongation.     

Changes in biochemical composition of the cell wall of the cotton fiber during development

The composition of the cell wall of the cotton fiber (Gossypium hirsutum L. Acala SJ-1) has been studied from the early stages of elongation (5 days postanthesis) through the period of secondary wall formation, using cell walls derived both from fibers developing on the plant and from fibers obtained from excised, cultured ovules. The cell wall of the elongating cotton fiber was shown to be a dynamic structure. Expressed as a weight per cent of the total cell wall, cellulose, neutral sugars (rhamnose, fucose, arabinose, mannose, galactose, and noncellulosic glucose), uronic acids, and total protein undergo marked changes in content during the elongation period. As a way of analyzing absolute changes in the walls with time, data have also been expressed as grams component per millimeter of fiber length. Expressed in this way for plant-grown fibers, the data show that the thickness of the cell wall is relatively constant until about 12 days postanthesis; after this time it markedly increases until secondary wall cellulose deposition is completed. Between 12 and 16 days postanthesis increases in all components contribute to total wall increase per millimeter fiber length. The deposition of secondary wall cellulose begins at about 16 days postanthesis (at least 5 days prior to the cessation of elongation) and continues until about 32 days postanthesis. At the time of the onset of secondary wall cellulose deposition, a sharp decline in protein and uronic acid content occurs. The content of some of the individual neutral sugars changes during development, the most prominent change being a large increase in noncellulosic glucose which occurs just prior to the onset of secondary wall cellulose deposition. Methylation analyses indicate that this glucose, at least in part, is 3-linked. In contrast to the neutral sugars, no significant changes in cell wall amino acid composition are observed during fiber development.     

Analysis of cell-wall polymers during cotton fiber development

Although the fibers of cotton (Gossypium hirsutum L.) are single cells with a secondary wall composed primarily of cellulose, the cell-wall polymers of the fibers are technically difficult to characterize with respect to molecular weights. This limitation hinders understanding how the fiber wall composition changes during development, particularly with respect to genotypic variations, and how the molecular composition is related to physical properties. We analyzed cell-wall polymers from cotton fibers (cultivar, Texas Marker-1) at several developmental stages (8–60 days post-anthesis; DPA) by gel-permeation chromatography of components soluble in dimethyl acetamide and lithium chloride. This procedure solubilizes fiber cell-wall components directly without prior extraction or derivatization, processes that could lead to degradation of high-molecular-weight components. Cellwall polymers from fibers at primary cell-wall stages had lower molecular weights than the cellulose from fibers at the secondary wall stages; however, the high-molecularweight cellulose characteristic of mature cotton was detected as early as 8 DPA. High-molecular-weight material decreased during the period of 10–18 DPA with concomitant increase in lower-molecular-weight wall components, possibly indicating hydrolysis during the later stages of elongation.Abbreviations DMAC dimethyl acetamide - DP degree of polymerization - DPA days post anthesis - GPC gel-permeation chromatography - MW molecular weight - MWD molecular-weight distribution - TM-1 Texas Marker 1     

Analysis of xyloglucan endotransglycosylase/hydrolase (XTH) genes from allotetraploid (Gossypium hirsutum) cotton and its diploid progenitors expressed during fiber elongation

Multiple cellular pathways have been shown to be involved during fiber initiation and elongation stages in the cultivated allotetraploid cotton (Gossypium hirsutum). The cell wall enzymes xyloglucan endotransglycosylase/hydrolases (XTH) have been reported to be associated with the biosynthesis of the cell wall and the growth of cotton fibers, probably regulating the plasticity of the primary cell wall. Among various cotton fiber cDNAs found to be preferentially expressed in cotton fibers, a xyloglucan endotransglycosylase (XTH) cDNA was significantly up-regulated during the elongation stage of cotton fiber development. In the present study, we isolated and characterized genomic clones encoding cotton XTH from cultivated cotton (Gossypium hirsutum) and its diploid progenitors (Gossypium arboreum and Gossypium raimondii), designated GhXTH1-1, GhXTH1-2, GaXTH1 and GrXTH, respectively. In addition, we isolated and characterized, by in silico methods, the putative promoter of XTH1 from Gossypium hirsutum. Sequence analysis revealed more than 50% homology to XTH's at the protein level. DNA gel blot hybridization indicated that at least two copies of GhXTH1 are present in Gossypium hirsutum whereas the diploid progenitor species Gossypium arboreum and Gossypium raimondii has only a single copy. Quantitative real-time PCR and high-resolution melting experiments indicated that in Gossypium hirsutum cultivars, in cotton fibers during early stages of fiber elongation specifically expressing only the GhXTH1-1 gene and expression levels of GhXTH1-1 in fibers varies among cultivars differing in fiber percentage and fiber length.     

Overexpression of GhFIM2 propels cotton fiber development by enhancing actin bundle formation

Cell elongation and secondary wall deposition are two consecutive stages during cotton fiber development. The mechanisms controlling the progression of these two developmental phases remain largely unknown. Here,we report the functional characterization of the actin-bundling protein GhFIM2 in cotton fiber. Overexpression of GhFIM2 increased the abundance of actin bundles,which was accompanied with accelerated fiber growth at the fastelongating stage. Meanwhile,overexpression of GhFIM2 could propel the onset of secondary cell wall biogenesis. These results indicate that the dynamic rearrangement of actin higher structures involving GhFIM2 plays an important role in the development of cotton fiber cells.     

An integrative analysis of four CESA isoforms specific for fiber cellulose production between Gossypium hirsutum and Gossypium barbadense

Cotton fiber is an excellent model system of cellulose biosynthesis; however, it has not been widely studied due to the lack of information about the cellulose synthase (CESA) family of genes in cotton. In this study, we initially identified six full-length CESA genes designated as GhCESA5–GhCESA10. Phylogenetic analysis and gene co-expression profiling revealed that CESA1, CESA2, CESA7, and CESA8 were the major isoforms for secondary cell wall biosynthesis, whereas CESA3, CESA5, CESA6, CESA9, and CESA10 should involve in primary cell wall formation for cotton fiber initiation and elongation. Using integrative analysis of gene expression patterns, CESA protein levels, and cellulose biosynthesis in vivo, we detected that CESA8 could play an enhancing role for rapid and massive cellulose accumulation in Gossypium hirsutum and Gossypium barbadense. We found that CESA2 displayed a major expression in non-fiber tissues and that CESA1, a housekeeping gene like, was predominantly expressed in all tissues. Further, a dynamic alteration was observed in cell wall composition and a significant discrepancy was observed between the cotton species during fiber elongation, suggesting that pectin accumulation and xyloglucan reduction might contribute to cell wall transition. In addition, we discussed that callose synthesis might be regulated in vivo for massive cellulose production during active secondary cell wall biosynthesis in cotton fibers.     

Cu/Zn superoxide dismutases in developing cotton fibers: evidence for an extracellular form

Hydrogen peroxide and other reactive oxygen species are important signaling molecules in diverse physiological processes. Previously, we discovered superoxide dismutase (SOD) activity in extracellular protein preparations from fiber-bearing cotton (Gossypium hirsutum L.) seeds. We show here, based on immunoreactivity, that the enzyme is a Cu/Zn-SOD (CSD). Immunogold localization shows that CSD localizes to secondary cell walls of developing cotton fibers. Five cotton CSD cDNAs were cloned from cotton fiber and classified into three subfamilies (Group 1: GhCSD1; Group 2: GhCSD2a and GhCSD2b; Group 3: GhCSD3 and GhCSD3s). Members of Group 1 and 2 are expressed throughout fiber development, but predominant during the elongation stage. Group 3 CSDs are also expressed throughout fiber development, but transiently increase in abundance at the transition period between cell elongation and secondary cell wall synthesis. Each of the three GhCSDs also has distinct patterns of expression in tissues other than fiber. Overexpression of cotton CSDs fused to green fluorescent protein in transgenic Arabidopsis demonstrated that GhCSD1 localizes to the cytosol, GhCSD2a localizes to plastids, and GhCSD3 is translocated to the cell wall. Subcellular fractionation of proteins from transgenic Arabidopsis seedlings confirmed that only c-myc epitope-tagged GhCSD3 co-purifies with cell wall proteins. Extracellular CSDs have been suggested to be involved in lignin formation in secondary cell walls of other plants. Since cotton fibers are not lignified, we suggest that extracellular CSDs may be involved in other plant cell wall growth and development processes.     

Changes in the sugar composition and molecular mass distribution of matrix polysaccharides during cotton fiber development

Cotton (Gossypium herbaceum L.) fiber development consists of a fiber elongation stage (up to 20 d post-anthesis) and a subsequent cell wall thickening stage. Cell wall analysis revealed that the extractable matrix (pectic and hemicellulosic) polysaccharides accounted for 30-50% of total sugar content in the fiber elongation stage but less than 3% in the cell wall thickening stage. By contrast, cellulose increased dramatically after the fiber elongation ceased. The amounts of extractable xyloglucans and arabinose- and galactose-containing polymers per seed increased in the early fiber elongation stage and decreased thereafter. The amounts of extractable acidic polymers and non-cellulosic beta-glucans (mainly composed of beta-1,3-glucans) increased in parallel with fiber elongation and then decreased. The molecular masses of extractable non-cellulosic beta-glucans, and arabinose- and galactose-containing polymers decreased during both fiber elongation and cell wall thickening stages. The molecular mass of extractable xyloglucans also decreased during the fiber elongation stage, but this decrease ceased during the cell wall thickening stage. Conversely, the molecular size of acidic polymers in the extractable pectic fraction increased during both stages. Thus, not only the amounts but also the molecular size of the extractable matrix polysaccharides showed substantial changes during cotton fiber development.     

Phylogenetically Distinct Cellulose Synthase Genes Support Secondary Wall Thickening in Arabidopsis Shoot Trichomes and Cotton Fiber

Through exploring potential analogies between cotton seed trichomes (or cotton fiber) and arabidopsis shoot trichomes we discovered that CesAs from either the primary or secondary wall phylogenetic clades can support secondary wall thickening. CesA genes that typically support primary wall synthesis, AtCesA1,2,3,5, and 6, underpin expansion and secondary wall thickening of arabidopsis shoot trichomes. In contrast, apparent orthologs of CesA genes that support secondary wall synthesis in arabidopsis xylem, AtCesA4,7, and 8, are up-regulated for cotton fiber secondary wall deposition. These conclusions arose from: (a) analyzing the expression of CesA genes in arabidopsis shoot trichomes; (b) observing birefringent secondary walls in arabidopsis shoot trichomes with mutations in AtCesA4, 7, or 8; (c) assaying up-regulated genes during different stages of cotton fiber development; and (d) comparing genes that were co-expressed with primary or secondary wall CesAs in arabidopsis with genes up-regulated in arabidopsis trichomes, arabidopsis secondary xylem, or cotton fiber during primary or secondary wall deposition. Cumulatively, the data show that: (a) the xylem of arabidopsis provides the best model for secondary wall cellulose synthesis in cotton fiber; and (b) CesA genes within a "cell wall toolbox" are used in diverse ways for the construction of particular specialized cell walls.