Reassembly in vitro of hexagonal surface arrays in a protein-producing bacterium, Bacillus brevis 47.

Bacillus brevis 47 had two protein layers (the outer and middle walls) and a peptidoglycan layer (the inner wall) and contained two major proteins with approximate molecular weights of 130,000 and 150,000 in the cell wall. Both the total and Triton-insoluble envelopes revealed a hexagonal lattice array with a lattice constant of 14.5 nm. The proteins of 130,000 and 150,000 molecular weight isolated from the Triton-insoluble envelopes were serologically different from each other and assembled in vitro on the peptidoglycan layer. A mixture of 130,000- and 150,000-molecular-weight proteins led to the formation of a five-layered cell wall structure, two layers on each side of the peptidoglycan layer, which resembled closely the Triton-insoluble envelopes. A three-layered cell wall structure, one layer on each side of the peptidoglycan layer, was reconstituted when only the 150,000-molecular-weight protein was used. Both five- and three-layered cell walls reconstituted in vitro also contained hexagonally arranged arrays with the same lattice constant as that of the total and Triton-insoluble envelopes. A mutant, strain 47-57, which was isolated as a phage-resistant colony, had a two-layered cell wall consisting of the middle and inner wall layers and contained only 150,000-molecular-weight protein as the major cell wall protein. The cell envelopes of the mutant revealed the hexagonal arrays with the same lattice constant as that of the wild-type cell envelopes. We conclude that the outer and middle wall layers consist of proteins with approximate molecular weights of 130,000 and 150,000, respectively. Furthermore, the 150,000-molecular-weight protein formed the hexagonal arrays in the middle wall layer.     

Electron Microscopic Observations on the Structure of the Envelopes of Mature Elementary Bodies and Developmental Reticulate Forms of Chlamydia psittaci

Purified suspensions of Chlamydia psittaci were prepared from L cells. Thin sections of intact elementary bodies and intact developmental reticulate bodies and of their purified envelopes were observed by electron microscopy. In both intact organisms and partially purified envelopes, two membranous structures, each appearing in electron micrographs as two darkly stained layers, were observed. In the elementary body sections, the outer membrane was round, apparently rigid, and was not soluble in 0.5% sodium dodecyl sulfate. The inner layer was irregular in shape and was completely removed by detergent treatment. We interpret these results to indicate that the outer rigid layer of the envelope is the cell wall and the inner layer is the cytoplasmic membrane. When the fragile reticulate body envelopes were similarly studied, the outer cell wall was clearly visible, and some evidence of an inner membrane was seen. After treatment with nucleases and detergent, all evidence of inner or cytoplasmic membrane was removed, but the outer cell wall remained. Thus, it appears that the cell wall of this organism is continuous throughout the growth cycle and that the fragility and lack of rigidity of the reticulate body cell is due to changes in chemical composition or structure of the cell wall.     

Structural and chemical characterization of the S layer of a Pseudomonas-like bacterium.

Sections and freeze-fractured preparations showed an S layer on the surface of Pseudomonas-like strain EU2. Polyacrylamide gel electrophoresis of cell envelopes extracted with 1% sodium dodecyl sulfate (SDS) at room temperature showed three proteins (45K, 55K, and 110K). The 55K protein was identified as the S-layer protein. Incubation in 1.5 M guanidine hydrochloride removed the S layer from cell envelopes and dissociated the structure into subunits. The soluble 55K protein reassembled into planar sheets upon removal of the guanidine hydrochloride by dialysis. Electron microscopy and image processing indicated that these sheets had p4 symmetry in projection with a lattice constant of 13.2 +/- 0.1 nm (corresponding to 9.3 nm between adjacent fourfold axes). In some instances these reassemblies appeared to form small three-dimensional crystals which gave particularly clear views of the structure in projection because of the superimposition of information from a number of layers. A model is proposed with molecules having rounded lobes connected by a narrower linker region and joining at the lobes to form the fourfold axes of the array. The pattern superficially resembles those of other bacterial S layers, such as those of Aeromonas salmonicida, Aeromonas hydrophila, and Azotobacter vinelandii. Extraction of cell envelopes with 1% SDS at 50 degrees C released the 110K protein from the envelopes and removed an amorphous backing layer from the S layer. The 45K protein displayed heat-modifiable migration in SDS-polyacrylamide gel electrophoresis and was insoluble in SDS at 50 degrees C or in high concentrations of guanidine hydrochloride, suggesting that it was associated with the peptidoglycan.     

The cell envelope of the hyperthermophilic archaebacterium Pyrobaculum organotrophum consists of two regularly arrayed protein layers: three-dimensional structure of the outer layer

The cell envelope of the hyperthermophilic sulphur-reducing archaebacterium Pyrobaculum organotrophum H10 was found to be composed of two distinct hexagonally arranged crystalline protein arrays. Electron microscopic analysis of freeze-etched cells and isolated envelopes in conjunction with image processing showed that the inner layer (lattice centre-to-centre spacing 27.9 nm) is essentially identical to the protein array of Pyrobaculum islandicum GEO3, a complex, rigid structure implicated in the maintenance of cell shape. The outer layer has clear p6 symmetry and a lattice spacing of 20.6 nm. Its three-dimensional structure was reconstructed from a negative stain tilt series of an intact double-layered envelope using Fourier filtration to separate the desired information from the other lattices present. The outer layer is a unique, porous network of blocklike dimers disposed around six-fold axes, and exhibits minimal asymmetry between its inner and outer faces. It appears to be rather loosely associated with the outer surface of the inner layer. In most H10 envelopes, the inner layer is orientated with one base vector exactly perpendicular to the long axis of the cell, so that the cylindrical portion is composed of a series of parallel cell-girdling hoops of hexameric morphological units. All the other known Pyrobaculum strains were found to have a GEO3-type envelope structure, consisting of a single rigid protein array and a fibrous capsule. Although H10 does not possess a capsule, fibrils appear to be sandwiched between the two protein layers.     

The structure and associations of the double S layer on the cell wall of Aquaspirillum sinuosum

Aquaspirillum sinuosum cell walls bear two paracrystalline, proteinaceous surface layers (S layers). Each shows a different symmetry: the inner layer is closely apposed to the outer membrane and is a tetragonal array (90 degrees axes; 5-nm units; repeat frequency 8 nm); the outer layer is a hexagonal array on the external surface (14-nm units; repeat frequency 18 nm) and, although the units have a six-pointed stellate form, the linkage between units is not resolved. The outer layer consists of a major 130-kDa protein and a 180-kDa minor component; these co-extract, co-assemble, and are inseparable by hydroxylapatite chromatography or by recrystallization. The solubilizing effects of reagents suggest stabilization by hydrogen bonding and Ca2+. The two outer layer proteins are serologically related and show partial identity by peptide mapping. Periodic acid--Schiff staining of the 180-kDa band suggests that this may be a glycosylated form of the 130-kDa component. The inner layer components form a doublet of 75- and 80-kDa polypeptides with extreme resistance to extraction. Close apposition to the outer membrane, resistance to chaotropes, aqueous insolubility, and behaviour in charge-shift electrophoresis suggest hydrophobic interaction between subunits and an integral association with the outer membrane.     

Morphological alterations of cell wall concomitant with protein release in a protein-producing bacterium, Bacillus brevis 47.

Bacillus brevis 47 secreted vast amounts of protein into the medium and had a characteristic three-layered cell wall. The three layers are designated, from the outermost to the innermost layer, as the outer wall (4.2 nm), the middle wall(8.5 nm), and the inner wall (2.1-3.7 nm). The inner wall might be a peptidoglycan layer. The fine cell wall structure was morphologically altered to various extents, depending on the growth period. At the early stationary phase of growth, cells began to shed the outer two layers of a limited area of the surface. This shedding was complete after further cell growth. The morphological alterations in the cell wall occurred concomitantly with a prominent increase in protein excretion. When protein secretion was severely inhibited by growing cells with Mg2+, morphological alterations in the cell wall were not observed, even at the late stationary phase of growth. This was also the case with a nonprotein-producing mutant, strain 47-5-25. When cells were incubated in buffers, the outer two layers of the cell wall were specifically removed, leaving cells surrounded only by the inner wall layer. The layers removed by incubation were recovered by high-speed centrifugation. This fraction consisted of two layers resembling the outer and middle wall layers. Protein secreted by B. brevis 47-5 consisted mainly of two proteins with approximate molecular weights of 150,000 and 130,000. Proteins released by incubating cells in buffers and proteins in the outer- and middle-wall-enriched fraction were also composed mainly of two proteins with the same molecular weights as those secreted into the medium. Therefore, we conclude that B. brevis 47 secretes proteins derived from the outer two layers of cell wall and these components are synthesized even after the shedding of the outer two layers.     

Ultrastructure and biochemistry of the cell wall of Methanococcus voltae.

The ultrastructure and chemical composition of the cell wall of the marine archaebacterium Methanococcus voltae were studied by negative-staining and freeze-etch electron microscopy and by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. M. voltae possesses a single regularly structured (RS) protein layer external to the plasma membrane. Freeze-etch preparations of cells indicated that the protein subunits are hexagonally arranged with a center-to-center spacing of approximately 10 nm. The extracted RS protein had a molecular weight of 76,000. It was present on envelopes prepared by shearing in a French press, osmotic lysis, or sonication, as indicated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. NaCl was not required for attachment of the RS protein to the underlying plasma membrane. The hexagonal array could be demonstrated by platinum shadowing and freeze-etching of envelopes, but negative staining in the abscence of NaCl failed to stabilize the array. The RS protein could be solubilized by urea, guanidine hydrochloride, dithiothreitol, and several detergents, including Nonidet P-40, Triton X-100, and Tween 20. However, the most specific release of the wall protein from envelopes occurred after a heat treatment in HEPES (N-2-hydroxyethylpiperazine-N'-2-ethanesulfonic acid) buffer at 50 to 60 degrees C.     

Lysis of Vibrio cholerae cells: direct isolation of the outer membrane from whole cells by treatment with urea

Cells of Vibrio cholerae underwent rapid autolysis when suspended in media of low osmolarity under non-growing conditions. Chaotropes like urea and guanidine. HCl which are potent protein denaturants caused complete and immediate lysis of whole cells. This unique sensitivity of V. cholerae to protein denaturants led to the development of a rapid method for the selective isolation of the outer membrane upon treatment of whole cells with urea. The composition of the outer membrane isolated from both whole cells and crude envelopes by treatment with urea was comparable with that of the outer membrane isolated by other conventional methods.     

Ultrastructural and Chemical Alteration of the Cell Envelope of Pseudomonas aeruginosa, Associated with Resistance to Ethylenediaminetetraacetate Resulting from Growth in a Mg2+-Deficient Medium

Cells of Pseudomonas aeruginosa became resistant to the lytic effect of ethylenediametetraacetate (EDTA) when grown in a Mg(2+)-deficient medium. To correlate ultrastructural changes in the cell wall associated with the shift to EDTA-resistance, a freeze-etch study was performed. Upon fracturing, the outer cell wall membrane split down the hydrophobic center to reveal the outer (concave) and inner (convex) layers. The concave cell wall layer of EDTA-sensitive cells grown in Mg(2+)-sufficient medium contained spherical units resting on an underlying smooth support layer. Upon EDTA treatment, approximately one-half of these spherical units were extracted. Cells grown in Mg(2+)-deficient medium were resistant to EDTA. The concave cell wall layer of EDTA-resistant cells had increased numbers of highly compacted spherical units, giving this layer a disorganized appearance. The highly compacted appearance of this layer was unaltered by EDTA treatment. Thus, growth in Mg(2+)-deficient medium resulted in cells which were resistant to EDTA and which possessed an ultrastructurally altered outer layer of the outer cell wall membrane. Cell envelopes from EDTA-resistant cells were found to possess 18% less phosphorus, 16.4% more total carbohydrate, and 13.3% more 2-keto-3-deoxyoctonate than cell envelopes from EDTA-sensitive cells. There were also qualitative, but not quantitative, differences in the protein content of cell envelopes from EDTA-resistant and EDTA-sensitive cells.     

Derepression of the Azotobacter vinelandii siderophore system, using iron-containing minerals to limit iron repletion

Azotobacter vinelandii solubilized iron from certain minerals using only dihydroxybenzoic acid, which appeared to be produced constitutively. Solubilization of iron from other minerals required dihydroxybenzoic acid and the siderophore N,N'-bis-(2,3- dihydroxybenzoyl )-L-lysine ( azotochelin ) or these chelators plus the yellow-green fluorescent siderophore azotobactin . In addition to this sequential production of siderophores, cells also demonstrated partial to hyperproduction relative to the iron-limited control. The iron sources which caused partial derepression of the siderophores caused derepression of all the high-molecular-weight iron-repressible outer membrane proteins except a 77,000-molecular-weight protein, which appeared to be coordinated with azotobactin production. Increased siderophore production correlated with increased production of outer membrane proteins with molecular weights of 93,000, 85,000, and 77,000, but an 81,000-molecular-weight iron-repressible protein appeared at a constant level despite the degree of derepression. When iron was readily available, it appeared to complex with a 60,000-molecular-weight protein believed to form a surface layer on the A. vinelandii cell.     

Superficial cell-wall layers on Spirillum "Ordal" and their in vitro reassembly.

The cell envelope of Sporillum sp. strain "Ordal" (possibly a variety of S. anulus) demonstrated multiple superficial wall layers which were diverse in their macromolecular arrays. Negative staining and freeze-etching techniques revealed an outer hexagonally packed layer and an inner tetragonally packed layer. However, both thin sections and freeze-etched cleavages of the wall showed that each of these regular structures rested upon a backing layer, and that there was a delicate amorphous layer overlying the outer hexagonal array. Rotary integration, optical deffraction, and reconstruction of image were used to clarify measurements of each array and to verify the validity of a diagrammatic model of the outer hexagonal system. The integrity of these layers required suitable cations (Ca2+ appeared essential) and pH (pH less than or equal to 4.6 dissociated most superficial layers). These observations aided in the development of a low-pH cationic-substitution technique, in which Na+ replaced essential Ca2+, for extraction of the layers from the cell surface. Dialysis to remove Na+ and restoration of Ca2+ initiated in vitro reassembly of the superficial layer components until regularly structured assembly products were formed.     

Identification and characterization of murine gammaherpesvirus 68 gp150: a virion membrane glycoprotein.

Murine gammaherpesvirus 68 (MHV-68) is a naturally occurring virus of murid rodents which displays pathobiological characteristics similar to those of other gammaherpesviruses, including Epstein-Barr virus (EBV). However, unlike EBV and many other gammaherpesviruses, MHV-68 replicates in epithelial cells in vitro and infects laboratory strains of mice and therefore provides a good model for the study of gammaherpesviruses. Studies of sequences around the center of the MHV-68 genome identified a gene (designated BPRF1 for BamHI P fragment rightward open reading frame 1) whose putative product had motifs reminiscent of a transmembrane glycoprotein. All other gammaherpesviruses have a glycoprotein in this genomic position, but the BPRF1 gene showed sequence homology with only the EBV membrane antigen gp340/220. Biochemical analysis showed that the product of BPRF1 was a glycoprotein present on the surface of infected cells, and immunoelectron microscopy showed that it was present in the virus particle. In addition, antibodies to the BPRF1 product raised by using a bacterial fusion protein neutralized the virus in the absence of complement. The predominant molecular weights of the protein were 150,000 and 130,000. Pulse-chase analysis and endoglycosidase-H digestion showed that the 130,000-molecular-weight form was a precursor of the 150,000-molecular-weight form, and cell surface labelling showed that the 150,000-molecular-weight form alone was on the cell surface. We therefore named the protein gp150. Since gp150 is the first virion-associated glycoprotein and neutralizing determinant of MHV-68 to be characterized, it provides a valuable tool for the future study of virus-host interactions.     

Biochemical characterization of the structural and nonstructural polypeptides of a porcine group C rotavirus.

Purified virions or radiolabeled lysates of infected MA104 cells were used to characterize the structural and nonstructural polypeptides of a porcine group C rotavirus. At least six structural proteins were identified from purified group C rotavirus by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Of these, two (37,000- and 33,000-molecular-weight polypeptides) were associated with the outer shell, as demonstrated by the ability of EDTA to remove them from the purified virion. The other four polypeptides (molecular weights, 125,000, 93,000, 74,000, and 41,000) were located in the inner shell. The structural or nonstructural nature of a 25,000-molecular-weight protein identified in our studies was unclear. Glycosylation inhibition studies with tunicamycin in infected cells demonstrated that the 37,000- and 25,000-molecular-weight proteins were glycosylated and contained mannose-rich oligosaccharides identified by radiolabeling of the infected cells with [3H]mannose. The 37,000-molecular-weight outer shell glycoprotein was shown by pulse-chase experiments to be posttranslationally processed. The kinetics of viral polypeptide synthesis in infected cells were also studied, and maximal synthesis occurred at 6 to 9 h postinfection. The 41,000-molecular-weight inner capsid polypeptide was the most abundant and was the subunit structure of a 165,000-molecular-weight protein aggregate. Two polypeptides (molecular weights, 39,000 and 35,000) appeared to be nonstructural, as determined by comparison of the protein pattern of radiolabeled infected cell lysates with that of purified virions. Radioimmunoprecipitation was used to examine the serologic cross-reactions between the viral polypeptides of a group C rotavirus with those of a group A rotavirus. No serologic cross-reactivities were detected. The polypeptides of group A and C rotaviruses are compared and discussed.     

Preparation of the FhuA (TonA) receptor protein from cell envelopes of an overproducing strain of Escherichia coli K-12.

A rapid and simple method for purification of the FhuA receptor protein from cell envelopes of a FhuA-overproducing strain of Escherichia coli K-12 was developed. The overproduction of FhuA was programmed by the thermoamplifiable plasmid pHK232, which carried the fhuACD genes of pLC19-19 of the Clarke and Carbon collection. At low temperature (27 degrees C), pHK232 specified the overproduction of FhuA to levels comparable to those of major outer membrane proteins OmpF, OmpC, and OmpA. The amount of these proteins in the outer membrane was reduced along with overproduction of FhuA. Upon runaway replication of pHK232 at 37 degrees C, the precursor of the FhuA protein, proFhuA, was also accumulated in the cell envelope in amounts similar to FhuA. For extraction of the FhuA protein, crude cell envelopes were washed with 2% Triton X-100-6 M urea to remove less tightly bound proteins. Then FhuA but not proFhuA was solubilized by treating Triton X-100-urea-washed membranes with 1% octylglucoside-1 mM EDTA. This procedure yielded FhuA protein free from other membrane proteins. The amount of lipopolysaccharide and phospholipids was low and ranged from 5 to 15% and 10 to 25% of the weight of the FhuA protein, respectively. As shown by direct inactivation and by competition assays, the isolated FhuA protein retained receptor activity for ferrichrome, albomycin, colicin M, and phages T5 and T1.     

Characterization and reassembly of a regular array in the cell wall of Clostridium difficile GAI 4131

The cell wall of Clostridium difficile GAI 4131 was revealed by electron microscopy to have an outer layer composed of a nearly square array and contained the two major proteins with molecular weights of 38 kDa and 42 kDa. The properties and reassembly of the two major proteins into the regular array were investigated. When the isolated cell walls were treated with hydrophobic bond-disrupting agents or a chelating agent specific for Ca2+, the two major proteins were effectively removed and the regularly arranged outer layer disappeared. The amino acid composition of the two major proteins differed from each other. The two major proteins also gave different peptide maps from each other upon proteolysis with Staphylococcus aureus V8 protease. The major proteins solubilized from the isolated cell walls with 8 M urea or 4 M guanidine hydrochloride could be reassembled into open-ended cylinders possessing the native regular pattern by dialysis against neutral buffer containing 5 mM CaCl2. The reassembled cylinders purified by centrifugation on a Percoll density gradient were composed of almost equal amounts of the 38 kDa and 42 kDa proteins and freed from the other proteins. These results suggest that the regular array in the outer cell wall layer is constructed from the two major cell wall proteins and requires Ca2+ for its assembly.     

Location of the Fracture Faces Within the Cell Envelope of Acinetobacter Species Strain MJT/F5/5

The cell wall of the gram-negative bacterium Acinetobacter species strain MJT/F5/5 shows in thin section an external “additional” layer, an outer membrane, an intermediate layer, and a dense layer. Negatively stained preparations showed that the additional layer is composed of hexagonally arranged subunits. In glycerol-treated preparations, freeze-etching revealed that the cell walls consist of four layers, with the main plane of fracture between layers cw 2 and cw 3. The surface of [Formula: see text] 2 consisted of densely packed particles, whereas [Formula: see text] 3 appeared to be fibrillar. In cell envelopes treated with lysozyme by various methods, the removal of the dense layer has detached the outer membrane and additional layer from the underlying layers, as shown in thin sections. When freeze-etched in the absence of glycerol, these detached outer membranes with additional layers fractured to reveal both the faces [Formula: see text] 2 and [Formula: see text] 3 with their characteristic surface structures, and, in addition, both the external and internal etched surfaces were revealed. This experiment provided conclusive evidence that the main fracture plane in the cell wall lies within the interior of the outer membrane. This and other evidence showed that the corresponding layers in thin sections and freeze-etched preparations are: the additional layer, cw 1; the outer membrane, cw (2 + 3); and the intermediate and dense layers together from cw 4. Because of similarities in structure between this Acinetobacter and other gram-negative bacteria, it seemed probable that the interior of the outer membrane is the plane most liable to fracture in the cell walls of most gram-negative bacteria.     

Characterization of a major envelope protein from the rumen anaerobe Selenomonas ruminantium OB268

Cell envelopes from the Gram-negative staining but phylogenetically Gram-positive rumen anaerobe Selenomonas ruminantium OB268 contained a major 42 kDa heat modifiable protein. A similarly sized protein was present in the envelopes of Selenomonas ruminantium D1 and Selenomonas infelix. Sodium dodecyl sulfate polyacrylamide gel electrophoresis of Triton X-100 extracted cell envelopes from S. ruminantium OB268 showed that they consisted primarily of the 42 kDa protein. Polyclonal antisera produced against these envelopes cross-reacted only with the 42 kDa major envelope proteins in both S. ruminantium D1 and S. infelix, indicating a conservation of antigenic structure among each of the major envelope proteins. The N-terminus of the 42 kDa S. ruminantium OB268 envelope protein shared significant homology with the S-layer (surface) protein from Thermus thermophilus, as well as additional envelope proteins containing the cell surface binding region known as a surface layer-like homologous (SLH) domain. Thin section analysis of Triton X-100 extracted envelopes demonstrated the presence of an outer bilayer over-laying the cell wall, and a regularly ordered array was visible following freeze-fracture etching through this bilayer. These findings suggest that the regularly ordered array may be composed of the 42 kDa major envelope protein. The 42 kDa protein has similarities with regularly ordered outer membrane proteins (rOMP) reported in certain Gram-negative and ancient eubacteria.     

Cell envelope alterations in antibiotic-sensitive and-resistant strains of Neisseria gonorrhoeae.

The cell envelopes of antibiotic-resistant and -sensitive isogenic strains of Neisseria gonorrhoeae were analyzed to determine whether acquisition of genetic loci for altered antibiotic sensitivity was accompanied by alterations in cell envelope composition. No differences in the composition of phospholipids and lipopolysaccharides were noted. Acquisition of mtr-2, which results in low-level, nonspecific increased resistance to multiple antibiotics, dyes, and detergents, was accompanied by a sevenfold increase in the amount of a minor, 52,000-molecular-weight outer membrane protein and a 32% increase in the extent of peptidoglycan cross-linking. Subsequent addition of the nonspecific hypersensitivity loci env-1 or env-2 to a strain carrying mtr-2 resulted in reversal of the phenotypic resistance determined by mtr-2 and marked reduction in both the amount of the 52,000-molecular-weight outer membrane protein and the extent of peptidoglycan cross-linking. Introduction of penB2, which results in a fourfold increase in resistance to penicillin and tetracycline, was accompanied by the disappearance of the principal outer membrane protein of the wild-type strain (molecular weight, 36,900) and the appearance of a new species of the principal outer membrane protein (molecular weight, 39,400) in the transformant.     

A polypeptide bacteriophage receptor: modified cell wall protein subunits in bacteriophage-resistant mutants of Bacillus sphaericus strain P-1

Bacillus sphaericus strain P-1 has previously been shown to have a tetragonally arrayed (T layer) protein which forms the outer layer of the cell wall. The T layer was quantitatively extracted from whole cells by 6 M urea, and the T layer subunits were purified by electrophoresis of the extracts on acrylamide gels containing 0.1% sodium dodecyl sulfate or 6 M urea. Using ethylene diacrylate cross-linked gels, the T layer was found to make up 16% of the total cellular protein. A virulent bacteriophage which is inactivated by purified T layer was isolated from soil. Twenty-four phage-resistant mutants were isolated, of which 17 had T layer subunits of increased mobility on sodium dodecyl sulfate acrylamide gels. No mutants devoid of T layer were found. Mutants were grouped into six classes according to the molecular weight of their T layer subunits. These ranged from that of the wild type, 150,000 down to 86,000. Two mutants from different classes were examined in detail. Cells of the mutant strains did not adsorb phage nor did cell walls isolated from these mutants inactivate phage. The amino acid composition of the T layers from mutants differed little from that of the wild-type T layer.     

Detachment and Chemical Characterization of the Regularly Arranged Subunits from the Surface of an Acinetobacter

Acinetobacter sp. strain MJT/F5/199A carries an array of tetragonally arranged subunits on its outer surface. The subunits can be detached from isolated cell walls by incubation with 1 M urea or by washing with water after treatment with 10 mM ethylenediaminetetraacetic acid or ethyleneglycol-bis(beta-aminoethylether)N,N'-tetraacetic acid. After removal of the urea, they reaggregate into the same ordered array at air-water interfaces in the presence of MgCl(2). The detached subunits were characterized as an acidic protein of molecular weight 65,000. They represent one-fifth of the total cell wall protein.