Regulation of IS1 transposition by the insA gene product

The IS1 element contains two adjacent genes called insA and insB, both required for IS1 transposition and IS1-mediated plasmid cointegration. These two genes are transcribed polycistronically from the promoter in the left terminal inverted repeat of IS1 (insL). We constructed overexpression systems of these genes with the tac promoter, which are regulated by an exogenous inducer, isopropyl-beta-D-thiogalactopyranoside (IPTG). Then we have examined, under various conditions of induction with IPTG, how overexpression of these genes affects IS1 transposition, using an assay based on plasmid cointegration. When the insA and insB genes were organized identically to the wild-type IS1 genes and simultaneously expressed using low concentrations of IPTG, activity of a mutant IS1 in cis was restored, but not in trans. Higher IPTG concentrations resulted in lower transposition activity. Expression in trans of insA and insB results in a 50 to 100-fold reduction of the frequency of cointegration mediated by wild-type IS1. Such a reduction is also observed when only the insA gene is overexpressed in trans. Overexpression of either mutant insA or insB does not affect the cointegration event. Tests with the insA-lacZ fusion gene showed that the InsA product inhibits the expression of IS1 genes directed by its own promoter in insL. These results suggest that the InsA product regulates IS1 transposition by inhibiting expression of IS1 transposition genes in addition to acting as part of a transposase complex.     

Mutational Analysis of the Open Reading Frames in the Transposable Element Is1

IS1 is one of the smallest transposable elements found in bacteria (768 bp). It contains eight overlapping open-reading-frames (ORFs) greater than 50 codons, designated insA to insG and insB'. To determine which of the ORFs actually code for proteins involved in transposition, we have introduced amber codons into each ORF by site-directed mutagenesis which make neutral changes in the overlapping ORFs. Each mutant IS1 was then tested for its ability to mediate cointegrate formation in Su+ and Su- backgrounds. The mutant elements were also tested for trans-complementation in an IS1-free Salmonella background. Our results show that the products of the insA and insB genes are the only ones essential for cointegrate formation. We suggest that other ORFs may, however, encode accessory proteins.     

Base substitutions in transposable element IS1 cause DNA duplication of variable length at the target site for plasmid co-integration.

We demonstrate that base substitutions in the IS1 sequence affect the length of the nucleotide sequence which is duplicated during IS1-mediated co-integration. IS1K, an IS1 variant present in the Escherichia coli chromosome, has seven base substitutions in its sequence as compared with that of IS1R derived from the plasmid R100. All substitutions are located in the internal region of IS1K. We have constructed plasmids containing IS1R, IS1K and hybrids between them: one contains four base substitutions causing an amino acid substitution in the insA gene and the other has three substitutions producing an amino acid substitution in the insB gene. We have isolated co-integrate plasmids formed by each IS1 and analysed nucleotide sequences of the target sites duplicated at the co-integration junctions. The results show that IS1K generates duplications of 8 or 14 bp as well as 9 bp, while IS1R exclusively generates the 9-bp duplications. Both hybrid IS1s also create 8- or 7-bp target duplications in addition to 9-bp duplications. These results indicate that the base substitutions in either insA or insB are sufficient for the occurrence of unusual target duplications, suggesting that both genes are involved in the target duplication.     

A transcriptional terminator sequence in the prokaryotic transposable element IS1

The prokaryotic transposable element IS1 is known to exert a strong polar effect upon integration into an operon. To elucidate this polar effect, we constructed a plasmid which has an IS1 integrated between the 5' half of the tet gene for tetracycline resistance and the cat structural gene for chloramphenicol resistance. The cat gene is expressed by the tet promoter and the presence of IS1 in orientation I, in which the IS1 transposase genes insA and insB are in the same orientation as the cat gene, reduced the cat expression. By introducing deletions or insertions within the IS1 sequence, we were able to map a rho-dependent terminator TIS1A between the insA and insB genes. Translational interruption between these ins genes is important for TIS1A to be an active terminator.     

Different Reading Frames Are Responsible for Is1-Dependent Deletions and Recombination

Two classes of plasmids in addition to the parent become apparent when plasmids that contain direct repeats of IS1. One class of plasmids has deleted sequences from the end of IS1 to nonrandom sites within the plasmid. The appearance of these plasmids in the population requires intact insA and insB reading frames, but not insC. The other class of plasmids has undergone an exchange within the direct repeats of IS1 on the plasmid. Their appearance requires InsC but neither InsA nor InsB. The two reactions may represent two distinguishable steps in IS1 transposition. The InsC-catalyzed exchange is independent of RecA and resembles hologous recombination since the frequency of recombinants arising from exchanges in different regions of IS1 appears to be roughly proportional to the size of the region. InsC can also catalyze an exchange between direct repeats of non-IS1 DNA.     

Insertion element IS1 encodes two structural genes required for its transposition

The nucleotide sequence analysis of insertion element IS1 has shown that IS1 could have as many as six translational reading frames encoding possible proteins. In order to determine which reading frames are actual structural genes responsible for IS1-mediated recombination, we introduced base substitution mutations including nonsense mutations into all of the potential reading frames and examined the ability of these IS1 mutants to mediate cointegration between two plasmids. The results reveal that IS1 has two structural genes (termed insA and insB), which are required for plasmid cointegration mediated by IS1.     

Function of the InsA gene in the IS1 element of the Tn9' transposon: influence of oligonucleotide inserts in the InsA gene on formation of simple insertions and plasmid cointegrates]

To elucidate the role of the insA reading frame in transposition of the IS1 element of the Tn9' transposon, the derivatives of plasmids pUC19::Tn9' and pUC19::IS1 have been obtained using oligonucleotide inserts of the length equal or exceeding 9 bp and equal to 10 bp. The ability of mutant variants of the Tn9' transposon and the IS1 element to form simple insertions and plasmid cointegrates was studied. To this end, experiments were performed on mobilization of the derivatives of pUC19 containing mutant variants of the IS1 element and Tn9' as well as of the plasmids pUC19::Tn9' by the conjugative plasmid pRP3.1. According to the data obtained, mutations (inserts) in the insA gene have no influence on the frequency of transposition of the IS1 element and Tn9' from the plasmid pUC19 to pRP3.1. At the same time, the frequency of transposition events of mutant variants of Tn9' from the plasmid pRP3.1 to pBR322 is more than 10 times lower in comparison with the wild type transposon. The data obtained are in accordance with the assumption that the insA gene is not essential for transposition. A hypothesis is put forward explaining the role of the insA gene product in the process of bringing together short inverted repeats of the IS1, which are the sites for the transposase to be recognized at first stages of transposition.     

Study of the role of the insA open reading frame in the IS1 insertion element structure during transposition and resolution of the IS1 mediated cointegrates

In order to elucidate the function of the IS1 insA gene derivatives of plasmid pUC19::Tn9' with insertions of synthetic oligonucleotides were obtained. The latter are equal or multiple of 9 b.p. in length and are located in the Pst1 site within each of the two IS1 copies of the Tn9' transposon. The insertions of the nine base oligonucleotides code for the neutral amino acids and do not shift the reading frame. One of the mutant transposon obtained - Tn9'/X was studied on the ability to form simple insertions and plasmid cointegrates. For this purpose the pUC19 derivatives carrying the wild type and mutant transposon were mobilized by conjugative plasmid pRP3.1. It was found that the damage of the insA gene does not influence the ability of transposon to form simple insertions and plasmid cointegrates in both recA - and rec+ cells of E. coli. However, the frequency of the cointegrate formation in the subsequent transposition of the mutant transposon from pRP3.1::Tn9'/X to pBR322 was by 10-20 times lower in comparison to the wild type transposon. Instable (dissociating) Tn9'/X-mediated plasmid cointegrates formed by interaction pUC19::Tn9'/X and pRP3.1 were obtained. It was shown that in the E. coli recA-cells such cointegrates dissociate, as a rule, "correctly", i.e. they segregate mainly plasmids of types pUC19::Tn9'/X and pUC19::IS1/X. The data obtained correspond with the notion that the gene insA product is not essential for transposition, but is, possibly, involved in the formation of the IS1-generated deletions.     

Functional organization of the ends of IS 1: specific binding site for an IS1-encoded protein

The IS 1-encoded protein InsA binds specifically to both ends of IS1, and acts as a repressor of IS1 gene expression and may be a direct inhibitor of the transposition process. We show here, using DNasel 'foot-printing' and gel retardation, that the InsA binding sites are located within the 24/25 bp minimal active ends of IS1 and that InsA induces DNA bending upon binding. Conformational modification of the ends of IS1 as a result of binding of the host protein integration host factor (IHF) to its site within the minimal ends has been previously observed. Using a collection of synthetic mutant ends we have mapped some of the nucleotide sequence requirements for InsA binding and for transposition activity. We show that sequences necessary for InsA binding are also essential for transposition activity. We demonstrate that InsA and IHF binding sites overlap since some sequence determinants are shared by both InsA and IHF. The data suggest that these ends contain two functional domains: one for binding of InsA and IHF, and the other for transposition activity. A third region, when present, may enhance transposition activity with an intact right end. This 'architecture' of the ends of IS1 is remarkably similar to that of IS elements IS10, IS50 and IS903.     

A complex insertion sequence cluster at a point of interaction between the linear plasmid SCP1 and the linear chromosome of Streptomyces coelicolor A3(2)

The giant linear plasmid SCP1 can integrate into the central region of the linear chromosome of Streptomyces coelicolor A3(2). Nucleotide sequence analysis around the target site for SCP1 integration in strain M145 identified a total of five copies of four insertion sequences (ISs) in a 6.5-kb DNA stretch. Three of the four (IS468, IS469, and IS470) are new IS elements, and the other is IS466. All of these elements contain one open reading frame which encodes a transposase-like protein. Two copies of IS468 (IS468A and -B) are tandemly aligned at the left end of the cluster. Following these, IS469 and IS466 are located in a tail-to-tail orientation with 69.3% identity to each other. IS470 is located at the right end of the cluster. The activities of IS466 and IS468 were demonstrated by transposition experiments and sequence comparison of several copies, respectively.     

Evidence that the insertion events of IS2 transposition are biased towards abrupt compositional shifts in target DNA and modulated by a diverse set of culture parameters

Insertion specificity of mobile genetic elements is a rather complex aspect of DNA transposition, which, despite much progress towards its elucidation, still remains incompletely understood. We report here the results of a meta-analysis of IS2 target sites from genomic, phage, and plasmid DNA and find that newly acquired IS2 elements are consistently inserted around abrupt DNA compositional shifts, particularly in the form of switch sites of GC skew. The results presented in this study not only corroborate our previous observations that both the insertion sequence (IS) minicircle junction and target region adopt intrinsically bent conformations in IS2, but most interestingly, extend this requirement to other families of IS elements. Using this information, we were able to pinpoint regions with high propensity for transposition and to predict and detect, de novo, a novel IS2 insertion event in the 3′ region of the gfp gene of a reporter plasmid. We also found that during amplification of this plasmid, process parameters such as scale, culture growth phase, and medium composition exacerbate IS2 transposition, leading to contamination levels with potentially detrimental clinical effects. Overall, our findings provide new insights into the role of target DNA structure in the mechanism of transposition of IS elements and extend our understanding of how culture conditions are a relevant factor in the induction of genetic instability.     

Spontaneous transposition in the bacteriophage lambda cro gene residing on a plasmid.

A new mutagenesis assay system based on the phage lambda cro repressor gene residing on a plasmid was developed. The assay detects mutations in cro that decrease the binding of the repressor to the OR operator in an OR PR-lacZ fusion present in a lambda prophage. Mutations arose spontaneously during growth of E. coli cells harboring cro plasmids at a frequency of 3-6 x 10(-6). Analysis of some 200 cro mutants from several 'wild-type' strains revealed a substantial fraction of 25-70% insertion events caused by transposition of IS elements. Most of the insertions were caused by IS1, but IS5 insertions were observed too. In strains harboring Tn10, IS10 was responsible for most insertions. Restriction nuclease digestion analysis revealed a preference for insertion of IS10 into the C-terminal half of cro, despite the absence of sequences which are known hot spots for Tn10 insertions. The frequency of IS1 insertions into cro decreased 25-60-fold and that of IS10 insertions decreased 200-fold in cells carrying the recA56 mutation, suggesting that RecA is involved in transposition of these elements. During the logarithmic phase of growth, the mutation frequency was constant for at least 22 generations; however, upon continuous incubation at the stationary phase, the mutation frequency gradually increased, yielding a 3-fold increase in the frequency of insertion and a 4-5-fold increase in point mutation. Genomic Southern analysis of chromosomal IS elements in cells which underwent a transposition from the chromosome into the cro plasmid revealed that the number and distribution of IS1 and IS5 were usually unaltered compared to cells which did not undergo a transposition event. In contrast, essentially each IS10 transposition was accompanied by multiple events which led to changes in the number and distribution of chromosomal IS10 elements.     

Transposon Tn10: genetic organization, regulation, and insertion specificity

Transposon Tn10 is a composite element in which two individual insertion sequence (IS)-like sequences cooperate to mediate transposition of the intervening material. The two flanking IS10 elements are not identical; IS10-right is responsible for functions required to promote transposition, and IS10-left is defective in transposition functions. We suggest that the two IS10 elements were originally identical in sequence and have subsequently diverged. IS10-right is compactly organized with structural gene(s), promoters, and sites important for transposition and (presumably) its regulation all closely linked and, in some cases, overlapping. IS10 has a single major coding region that almost certainly encodes an essential transposition function. A pair of opposing promoters flank the start of this coding region. One of these promoters is responsible for expression in vivo of transposon-encoded transposition functions. We propose that the second promoter is involved in modulation of Tn10 transposition. Genetic analysis suggests that transposon-encoded function(s) may be preferentially cis-acting. Insertion of Tn10 into particular preferred target sites is due primarily to the occurrence of a particular six-base pair target DNA sequence. The properties of this sequence suggest that symmetrically disposed subunits of a single protein may be responsible for both recognition and cleavage of target DNA during insertion.     

High-temperature-induced transposition of insertion elements in burkholderia multivorans ATCC 17616

An efficient and quantitative method to analyze the transposition of various insertion sequence (IS) elements in Burkholderia multivorans ATCC 17616 was devised. pGEN500, a plasmid carrying a Bacillus subtilis-derived sacB gene, was introduced into ATCC 17616 cells, and 25% of their sucrose-resistant derivatives were found to carry various IS elements on pGEN500. A PCR-based experimental protocol, in which a mixture of several specific primer pairs was used, revealed that pGEN500 captured, in addition to five previously reported IS elements (IS401, IS402, IS406, IS407, and IS408), three novel IS elements, ISBmu1, ISBmu2, and ISBmu3. The global transposition frequency of these IS elements was enhanced more than sevenfold under a high-temperature condition (42 degrees C) but not under oxidative stress or starvation conditions. To our knowledge, this is the first report demonstrating the elevated transposition activities of several IS elements at a high temperature. The efficient experimental protocol developed in this study will be useful in quantitatively and simultaneously investigating various IS elements, as well as in capturing novel functional mobile elements from a wide variety of bacteria.     

On the role of IS1 in the formation of hybrids between the bacteriophage P1 and the R plasmid NR1

Summary The genomes of bacteriophage P1 derivatives carrying drug resistance genes derived from an R plasmid NR1 were analysed by restriction cleavage and be DNA-DNA hybridization. Two representatives of a class of oversized P1CmSmSu phages were identified as P1 carrying the entire r-determinant of NR1 together with its two flanking, directly repeated IS1. In one case the r-determinant insertion is carried at the site of the residential IS1 of P1, in the other case it is transposed into another region of the P1 genome. Models postulate that the first type resulted from reciprocal recombination within IS1 elements and that the formation of the second type of P1-R hybrid depended both on IS1 mediated transposition and reciprocal recombination. Plaque forming P1Cm or P1CmSm phages are explained as IS1 mediated deletion derivatives of P1CmSmSu, although an alternative model postulates that sometimes P1Cm phages might result from two consecutive transposition events of only one IS1 without involving reciprocal recombination. Secondary P1 derivatives carrying only one IS1 at the site of the original r-determinant or of Cm insertions into P1 must have been produced by reciprocal recombination between the two IS1 flanking the insertions. An implication from this study, that any genetic material carried adjacent to an IS1 element may undergo passive transposition, is discussed.