Quantification of viable endospores from a Greenland ice core

Endospores (i.e., bacterial spores) embedded in polar ices present an opportunity to investigate the most durable form of life in an ideal medium for maintaining long-term viability. However, little is known about the endospore distribution and viability in polar ices. We have determined germinable endospore concentrations of bacterial spores capable of germination in a Greenland ice core (GISP2 94 m, ID# G2-271) using two complementary endospore viability assays (EVA), recently developed in our laboratory. These assays are based on bulk spectroscopic analysis (i.e., spectroEVA), and direct microscopic enumeration (i.e., microEVA) of ice core concentrates. Both assays detect dipicolinic acid (DPA) release during l-alanine induced germination via terbium ion (Tb3+)-DPA luminescence. Using spectroEVA, the germinable and total bacterial spore concentrations were found to be 295+/-19 spores mL(-1) and 369+/-36 spores mL(-1), respectively, (i.e., 80% of the endospores were capable of germination). Using microEVA, the germinating endospore concentration was found to be 27+/-2 spores mL(-1). The total cell concentration, as determined by DAPI stain fluorescence microscopy, was 7.0 x 10(3)+/-6.7 x 10(2) cells mL(-1). Culturing attempts yielded 2 CFU mL(-1) (4 degrees C). We conclude that endospores capable of germination in the GISP2 ice cores are readily determined using novel endospore viability assays.     

Validation of a Clostridium endospore viability assay and analysis of Greenland ices and Atacama Desert soils

A microscopy-based endospore viability assay (micro-EVA) capable of enumerating germinable Clostridium endospores (GCEs) in less than 30 min has been validated and employed to determine GCE concentrations in Greenland ices and Atacama Desert soils. Inoculation onto agarose doped with Tb(3+) and d-alanine triggers Clostridium spore germination and the concomitant release of ～10(8) molecules of dipicolinic acid (DPA) per endospore, which, under pulsed UV excitation, enables enumeration of resultant green Tb(3+)-DPA luminescent spots as GCEs with time-gated luminescence microscopy. The intensity time courses of the luminescent spots were characteristic of stage I Clostridium spore germination dynamics. Micro-EVA was validated against traditional CFU cultivation from 0 to 1,000 total endospores/ml (i.e., phase-bright bodies/ml), yielding 56.4% ± 1.5% GCEs and 43.0% ± 1.0% CFU. We also show that d-alanine serves as a Clostridium-specific germinant (three species tested) that inhibits Bacillus germination of spores (five species tested) in that endospore concentration regime. Finally, GCE concentrations in Greenland ice cores and Atacama Desert soils were determined with micro-EVA, yielding 1 to 2 GCEs/ml of Greenland ice (versus <1 CFU/ml after 6 months of incubation) and 66 to 157 GCEs/g of Atacama Desert soil (versus 40 CFU/g soil).     

Fast sterility assessment by germinable-endospore biodosimetry

The increased demand for sterile products has created the need for rapid technologies capable of validating the hygiene of industrial production processes. Bacillus endospores are in standard use as biological indicators for evaluating the effectiveness of sterilization processes. Currently, culture-based methods, requiring more than 2 days before results become available, are employed to verify endospore inactivation. We describe a rapid, microscopy-based endospore viability assay (microEVA) capable of enumerating germinable endospores in less than 15 min. MicroEVA employs time-gated luminescence microscopy to enumerate single germinable endospores via terbium-dipicolinate (Tb-DPA) luminescence, which is triggered under UV excitation as 10(8) DPA molecules are released during germination on agarose containing Tb(3+) and a germinant (e.g., L-alanine). Inactivation of endospore populations to sterility was monitored with microEVA as a function of thermal and UV dosage. A comparison of culturing results yielded nearly identical decimal reduction values, thus validating microEVA as a rapid biodosimetry method for monitoring sterilization processes. The simple Tb-DPA chemical test for germinability is envisioned to enable fully automated instrumentation for in-line monitoring of hygiene in industrial production processes.     

Spore dipicolinic acid contents used for estimating the number of endospores in sediments

Endospores are heat-resistant bacterial resting stages that can remain viable for long periods of time and may thus accumulate in sediments as a function of sediment age. The number of spores in sediments has only rarely been quantified, because of methodological problems, and consequently little is known about the quantitative contribution of endospores to the total number of prokaryotic cells. We here report on a protocol to determine the number of endospores in sediments and cultures. The method is based on the fluorimetric determination of dipicolinic acid (DPA), a spore core-specific compound, after reaction with terbium chloride. The concentration of DPA in natural samples is converted into endospore numbers using endospore-forming pure cultures as standards. Quenching of the fluorescence by sediment constituents and background fluorescence due to humic substances hampered direct determination of DPA in sediments. To overcome those interferences, DPA was extracted using ethyl acetate prior to fluorimetric measurements of DPA concentrations. The first results indicated that endospore numbers obtained with this method are orders of magnitude higher than numbers obtained by cultivation after pasteurization. In one of the explored sediment cores, endospores accounted for 3% of all stainable prokaryotic cells.     

Microbial imprinted polypyrrole/poly(3-methylthiophene) composite films for the detection of Bacillus endospores

The fabrication of Bacillus subtilis endospore imprinted conducting polymer films and subsequent electrochemical detection of bound spores is reported. Imprinted films were prepared by absorbing spores on the surface of glassy carbon electrodes upon which a polypyrrole, followed by a poly(3-methylthiophene), layer were electrochemically deposited. Spore template release was achieved through soaking the modified electrode in DMSO. Binding of endospores to imprinted films could be detected via impedance spectroscopy by monitoring changes in Y' (susceptance) using Mn(II)Cl2 (0.5M pH 3) as the supporting electrolyte. Here, the change in Y' could be correlated to spore densities between 10(4) and 10(7)cfu/ml. More sensitive detection of absorbed spores was achieved by following endospore germination via changes in film charge as measured using cyclic voltammetry. Here, imprinted films were submerged in spore suspensions to permit absorption, heat activated at 70 degrees C for 10 min prior to transferring to an electrochemical cell containing germination activators. By using the assay format it was possible to detect 10(2)cfu/ml. The observed changes in film charge could be attributed to the interaction of the supporting conducting polymer with dipicolinic acid (DPA) and other constituents released from the core in the course of germination. In all cases, it was not possible to regenerate the imprinted films without losing electrode response. In summary, the study has provided proof-of-concept for fabricating microbial imprinted films using conducting polymers.     

Endospores of Sporosarcina halophila: characteristics and ultrastructure

Sporosarcina halophila forms endospores. Electron micrographs revealed ultrastructural similarity to spores of S. ureae. Spore germination indicated by loss of refractility, darkening, swelling and formation of new vegetative cells was followed by phase contrast light microscopy. To induce spore germination, the endospores needed to be heat avtivated. After activation, they were inoculated into nutrient broth medium supplemented with sea-water. Double concentrated sea-water was found to be optimal for germination. Similar to other bacterial endospores, the spores were found to be resistant to heat and ethanol. An ultraviolet absorbing substance was isolated from suspensions of free spores; it was identified to be pyridine-2,6-dicarboxylic acid (DPA) usually present in bacterial spores. DPA was detected in amounts ranging from 5–7% of the spore dry weight; it was not detected in extracts of vegetative cells.Abbreviation DPA 2,6-pyridine-dicarboxylic acid     

Bactericidal effect of solar water disinfection under real sunlight conditions

Batch solar disinfection (SODIS) inactivation kinetics are reported for suspensions in water of Campylobacter jejuni, Yersinia enterocolitica, enteropathogenic Escherichia coli, Staphylococcus epidermidis, and endospores of Bacillus subtilis, exposed to strong natural sunlight in Spain and Bolivia. The exposure time required for complete inactivation (at least 4-log-unit reduction and below the limit of detection, 17 CFU/ml) under conditions of strong natural sunlight (maximum global irradiance, approximately 1,050 W m(-2) +/- 10 W m(-2)) was as follows: C. jejuni, 20 min; S. epidermidis, 45 min; enteropathogenic E. coli, 90 min; Y. enterocolitica, 150 min. Following incomplete inactivation of B. subtilis endospores after the first day, reexposure of these samples on the following day found that 4% (standard error, 3%) of the endospores remained viable after a cumulative exposure time of 16 h of strong natural sunlight. SODIS is shown to be effective against the vegetative cells of a number of emerging waterborne pathogens; however, bacterial species which are spore forming may survive this intervention process.     

Sensitive quantification of dipicolinic acid from bacterial endospores in soils and sediments

Endospore-forming bacteria make up an important and numerically significant component of microbial communities in a range of settings including soils, industry, hospitals and marine sediments extending into the deep subsurface. Bacterial endospores are non-reproductive structures that protect DNA and improve cell survival during periods unfavourable for bacterial growth. An important determinant of endospores withstanding extreme environmental conditions is 2,6-pyridine dicarboxylic acid (i.e. dipicolinic acid, or DPA), which contributes heat resistance. This study presents an improved HPLC-fluorescence method for DPA quantification using a single 10-min run with pre-column Tb³⁺ chelation. Relative to existing DPA quantification methods, specific improvements pertain to sensitivity, detection limit and range, as well as the development of new free DPA and spore-specific DPA proxies. The method distinguishes DPA from intact and recently germinated spores, enabling responses to germinants in natural samples or experiments to be assessed in a new way. DPA-based endospore quantification depends on accurate spore-specific DPA contents, in particular, thermophilic spores are shown to have a higher DPA content, meaning that marine sediments with plentiful thermophilic spores may require spore number estimates to be revisited. This method has a wide range of potential applications for more accurately quantifying bacterial endospores in diverse environmental samples.     

An automated front-end monitor for anthrax surveillance systems based on the rapid detection of airborne endospores

A fully automated anthrax smoke detector (ASD) has been developed and tested. The ASD is intended to serve as a cost effective front-end monitor for anthrax surveillance systems. The principle of operation is based on measuring airborne endospore concentrations, where a sharp concentration increase signals an anthrax attack. The ASD features an air sampler, a thermal lysis unit, a syringe pump, a time-gated spectrometer, and endospore detection chemistry comprised of dipicolinic acid (DPA)-triggered terbium ion (Tb(3+)) luminescence. Anthrax attacks were simulated using aerosolized Bacillus atrophaeus spores in fumed silica, and corresponding Tb-DPA intensities were monitored as a function of time and correlated to the number of airborne endospores collected. A concentration dependence of 10(2)-10(6) spores/mg of fumed silica yielded a dynamic range of 4 orders of magnitude and a limit of detection of 16 spores/L when 250 L of air were sampled. Simulated attacks were detected in less than 15 min.     

Bacillus subtilis diacylglycerol kinase (DgkA) enhances efficient sporulation

The sn-1,2-diacylglycerol kinase homologue gene, dgkA, is a sporulation gene indispensable for the maintenance of spore stability and viability in Bacillus subtilis. After 6 h of growth in resuspension medium, the endospore morphology of the dgkA mutant by standard phase-contrast microscopy was normal; however, after 9 h, the endospores appeared mostly dark by phase-contrast microscopy, suggesting a defect in the spores. Moreover, electron microscopic studies revealed an abnormal cortex structure in mutant endospores 6 h after the onset of sporulation, an indication of cortex degeneration. In addition, a significant decrease in the dipicolinic acid content of mutant spores was observed. We also found that dgkA is expressed mainly during the vegetative phase. It seems likely that either the DgkA produced during growth prepares the cell for an essential step in sporulation or the enzyme persists into sporulation and performs an essential function.     

The use of flow cytometry to study the germination of Bacillus cereus endospores.

BACKGROUND: At present the study of endospore germination is conducted using microbiological methods which are slow and yield data based on the means of large heterogeneous populations. Flow cytometry (FCM) offers the potential to rapidly quantify and identify germination and outgrowth events for large numbers of individual endospores. METHODS: Standard methods were employed to arrest the germination of Bacillus cereus endospores at defined stages. Endospores were then stained with SYTO 9 alone or carboxyfluorescein diacetate (CFDA) together with Hoechst 33342 and analysed using FCM. Comparisons were made between FCM as a method to measure germination rate and standard microbiological techniques. RESULTS: Germinating endospores displayed increases in permeability to SYTO 9 and hydrolysis of CFDA compared with controls. Statistically significant correlations were found between the standard plate count method and both FCM methods for measuring the percentage of germinating and outgrowing endospores up to 75 min after addition of germinant. CONCLUSIONS: Using FCM, the percentage of germinating or outgrowing endospores at various time points during germination and/or outgrowth can be quantified. FCM with CFDA/Hoechst 33342 staining may be used to estimate overall germination rate, whereas FCM with SYTO 9 staining may be used to quantify ungerminated, germinating and outgrowing endospores.     

Use of Epifluorescence Microscopy in Studies of the Germination and Recovery of Thermoactinomycetes

Spore germination and growth of thermoactinomycetes were observed by epifluorescence microscopy. Each of the principal stages in germination was recognized and found to correspond to changes in phase-contrast appearance commonly monitored during endospore germination. The effects of novobiocin and nalidixic acid on germination of Thermoactinomyces vulgaris and T. thalpophilus were studied by using epifluorescence microscopy. Outgrowth but not initiation was inhibited by 100 μg of nalidixic acid per ml and 50 μg of novobiocin per ml. When each of the compounds, at various concentrations, was incorporated into a medium for thermoactinomycete recovery, the antibiotics were found to inhibit colony development. Samples of water and sediment incubated in a growth medium containing novobiocin and selective for thermoactinomycete species were examined by epifluorescence microscopy for total numbers of outgrown spores. Direct viable counts of outgrown spores indicated that the standard plate count enumerated less than 10% of the viable population of thermoactinomycetes.     

Assessment of bacterial endospore viability with fluorescent dyes

AIM: To validate three fluorescence viability assays designed primarily for vegetative cells on pure Bacillus endospores. METHODS AND RESULTS: Purified fresh and gamma-irradiated Bacillus endospores (Bacillus cereus, B. coagulans and two strains of B. subtilis) were used. The viability assays were: 5-cyano-2,3-diotolyl tetrazolium chloride (CTC) to test respiratory activity and early germination, DiBAC4(3) and Live/Dead BacLight to measure membrane energization and permeabilization, respectively. Gamma irradiation treatment completely eliminated spore culturability and was used as negative control. The untreated spores showed respiratory activity after 1 h of incubation and this was characteristic of almost 100% of spores after 24 h. The membrane potential assessment gave no answer about spore viability. A lower proportion of untreated spores had permeabilized membrane compared with gamma-irradiated spores using Live/Dead BacLight (P < 0.02). CONCLUSION: It is possible to use CTC and Live/Dead BacLight to rapidly test endospore viability and evaluate the proportion of spores in a preparation that could not be recovered with plate count. SIGNIFICANCE AND IMPACT OF THE STUDY: This study shows that fluorescence tests could be applied to assess viability in potentially pathogenic Bacillus spore preparations within 1 h.     

A highly sensitive HPLC method for determination of nanomolar concentrations of dipicolinic acid, a characteristic constituent of bacterial endospores

A high-performance liquid chromatographic method with indirect fluorescence detection has been developed for quantification of dipicolinic acid, a major constituent of bacterial endospores. After separation on a reversed-phase column, a post-column reagent of sodium acetate at 1 mol l(-1) with 50 micromol l(-1) terbium chloride was added for complexation of dipicolinic acid. Terbium monodipicolinate complexes formed were quantified by measuring the fluorescence emission maximum at 548 nm after excitation with UV light at 270 nm wavelength. Parameters of post-column complexation were optimized to achieve a detection limit of 0.5 nmol DPA l(-1), corresponding to about 10(3) Desulfosporosinus orientis endospores per ml. The method was applied to the analysis of spore contamination in tuna and for estimating the endospore numbers in marine sediments.     

Pressure inactivation of Bacillus endospores

The inactivation of bacterial endospores by hydrostatic pressure requires the combined application of heat and pressure. We have determined the resistance of spores of 14 food isolates and 5 laboratory strains of Bacillus subtilis, B. amyloliquefaciens, and B. licheniformis to treatments with pressure and temperature (200 to 800 MPa and 60 to 80 degrees C) in mashed carrots. A large variation in the pressure resistance of spores was observed, and their reduction by treatments with 800 MPa and 70 degrees C for 4 min ranged from more than 6 log units to no reduction. The sporulation conditions further influenced their pressure resistance. The loss of dipicolinic acid (DPA) from spores that varied in their pressure resistance was determined, and spore sublethal injury was assessed by determination of the detection times for individual spores. Treatment of spores with pressure and temperature resulted in DPA-free, phase-bright spores. These spores were sensitive to moderate heat and exhibited strongly increased detection times as judged by the time required for single spores to grow to visible turbidity of the growth medium. The role of DPA in heat and pressure resistance was further substantiated by the use of the DPA-deficient mutant strain B. subtilis CIP 76.26. Taken together, these results indicate that inactivation of spores by combined pressure and temperature processing is achieved by a two-stage mechanism that does not involve germination. At a pressure between 600 and 800 MPa and a temperature greater than 60 degrees C, DPA is released predominantly by a physicochemical rather than a physiological process, and the DPA-free spores are inactivated by moderate heat independent of the pressure level. Relevant target organisms for pressure and temperature treatment of foods are proposed, namely, strains of B. amyloliquefaciens, which form highly pressure-resistant spores.     

Role of superoxide in the germination of Bacillus anthracis endospores

The spore forming Gram-positive bacterium Bacillus anthracis, the causative agent of anthrax, has achieved notoriety due to its use as a bioterror agent. In the environment, B. anthracis exists as a dormant endospore. Germination of endospores during their internalization within the myeloid phagocyte, and the ability of those endospores to survive exposure to antibacterial killing mechanisms such as superoxide (O(2)*-, is a key initial event in the infective process. We report herein that endospores exposed to fluxes of O(2)*- typically found in stimulated phagocytes had no effect on viability. Further endospores of the Sterne strain of B. anthracis were found to scavenge O(2)*-, which may enhance the ability of the bacterium to survive within the hostile environment of the phagolysosome. Most intriguing was the observation that endospore germination was stimulated by a flux of O(2)*- as low as 1 microM/min. Data presented herein suggest that B. anthracis may co-opt O(2)*- which is produced by stimulated myeloid phagocytes and is an essential element of host immunity, as a necessary step in productive infection of the host.     

Pressure Inactivation of Bacillus Endospores

The inactivation of bacterial endospores by hydrostatic pressure requires the combined application of heat and pressure. We have determined the resistance of spores of 14 food isolates and 5 laboratory strains of Bacillus subtilis, B. amyloliquefaciens, and B. licheniformis to treatments with pressure and temperature (200 to 800 MPa and 60 to 80°C) in mashed carrots. A large variation in the pressure resistance of spores was observed, and their reduction by treatments with 800 MPa and 70°C for 4 min ranged from more than 6 log units to no reduction. The sporulation conditions further influenced their pressure resistance. The loss of dipicolinic acid (DPA) from spores that varied in their pressure resistance was determined, and spore sublethal injury was assessed by determination of the detection times for individual spores. Treatment of spores with pressure and temperature resulted in DPA-free, phase-bright spores. These spores were sensitive to moderate heat and exhibited strongly increased detection times as judged by the time required for single spores to grow to visible turbidity of the growth medium. The role of DPA in heat and pressure resistance was further substantiated by the use of the DPA-deficient mutant strain B. subtilis CIP 76.26. Taken together, these results indicate that inactivation of spores by combined pressure and temperature processing is achieved by a two-stage mechanism that does not involve germination. At a pressure between 600 and 800 MPa and a temperature greater than 60°C, DPA is released predominantly by a physicochemical rather than a physiological process, and the DPA-free spores are inactivated by moderate heat independent of the pressure level. Relevant target organisms for pressure and temperature treatment of foods are proposed, namely, strains of B. amyloliquefaciens, which form highly pressure-resistant spores.     

Exploitation of immunofluorescence for the quantification and characterization of small numbers of Pasteuria endospores

The Pasteuria group of endospore-forming bacteria has been studied as a biocontrol agent of plant-parasitic nematodes. Techniques have been developed for its detection and quantification in soil samples, and these mainly focus on observations of endospore attachment to nematodes. Characterization of Pasteuria populations has recently been performed with DNA-based techniques, which usually require the extraction of large numbers of spores. We describe a simple immunological method for the quantification and characterization of Pasteuria populations. Bayesian statistics were used to determine an extraction efficiency of 43% and a threshold of detection of 210 endospores g(-1) sand. This provided a robust means of estimating numbers of endospores in small-volume samples from a natural system. Based on visual assessment of endospore fluorescence, a quantitative method was developed to characterize endospore populations, which were shown to vary according to their host.     

Slow Leakage of Ca-Dipicolinic Acid from Individual Bacillus Spores during Initiation of Spore Germination

When exposed to nutrient or nonnutrient germinants, individual Bacillus spores can return to life through germination followed by outgrowth. Laser tweezers, Raman spectroscopy, and either differential interference contrast or phase-contrast microscopy were used to analyze the slow dipicolinic acid (DPA) leakage (normally ∼20% of spore DPA) from individual spores that takes place prior to the lag time, T_lag, when spores begin rapid release of remaining DPA. Major conclusions from this work with Bacillus subtilis spores were as follows: (i) slow DPA leakage from wild-type spores germinating with nutrients did not begin immediately after nutrient exposure but only at a later heterogeneous time T₁; (ii) the period of slow DPA leakage (ΔT_leakage = T_lag − T₁) was heterogeneous among individual spores, although the amount of DPA released in this period was relatively constant; (iii) increases in germination temperature significantly decreased T₁ times but increased values of ΔT_leakage; (iv) upon germination with l-valine for 10 min followed by addition of d-alanine to block further germination, all germinated spores had T₁ times of less than 10 min, suggesting that T₁ is the time when spores become committed to germinate; (v) elevated levels of SpoVA proteins involved in DPA movement in spore germination decreased T₁ and T_lag times but not the amount of DPA released in ΔT_leakage; (vi) lack of the cortex-lytic enzyme CwlJ increased DPA leakage during germination due to longer ΔT_leakage times in which more DPA was released; and (vii) there was slow DPA leakage early in germination of B. subtilis spores by the nonnutrients CaDPA and dodecylamine and in nutrient germination of Bacillus cereus and Bacillus megaterium spores. Overall, these findings have identified and characterized a new early event in Bacillus spore germination.     

Studies on the mechanism of killing of Bacillus subtilis spores by hydrogen peroxide

AIMS: To determine the mechanism of killing of Bacillus subtilis spores by hydrogen peroxide. METHODS AND RESULTS: Killing of spores of B. subtilis with hydrogen peroxide caused no release of dipicolinic acid (DPA) and hydrogen peroxide-killed spores were not appreciably sensitized for DPA release upon a subsequent heat treatment. Hydrogen peroxide-killed spores appeared to initiate germination normally, released DPA and hydrolysed significant amounts of their cortex. However, the germinated killed spores did not swell, did not accumulate ATP or reduced flavin mononucleotide and the cores of these germinated spores were not accessible to nucleic acid stains. CONCLUSIONS: These data indicate that treatment with hydrogen peroxide results in spores in which the core cannot swell properly during spore germination. SIGNIFICANCE AND IMPACT OF THE STUDY: The results provide further information on the mechanism of killing of spores of Bacillus species by hydrogen peroxide.