Mechanistic studies on the mononuclear ZnII-containing metallo-beta-lactamase ImiS from Aeromonas sobria

In an effort to understand the reaction mechanism of a B2 metallo-beta-lactamase, steady-state and pre-steady-state kinetic and rapid freeze quench electron paramagnetic resonance (EPR) studies were conducted on ImiS and its reaction with imipenem and meropenem. pH dependence studies revealed no inflection points in the pH range of 5.0-8.5, while proton inventories demonstrated at least 1 rate-limiting proton transfer. Site-directed mutagenesis studies revealed that Lys224 plays a catalytic role in ImiS, while the side chain of Asn233 does not play a role in binding or catalysis. Stopped-flow fluorescence studies on ImiS, which monitor changes in tryptophan fluorescence on the enzyme, and its reaction with imipenem and meropenem revealed biphasic fluorescence time courses with a rate of fluorescence loss of 160 s(-)(1) and a slower rate of fluorescence regain of 98 s(-)(1). Stopped-flow UV-vis studies, which monitor the concentration of substrate, revealed a rapid loss in absorbance during catalysis with a rate of 97 s(-)(1). These results suggest that the rate-limiting step in the reaction catalyzed by ImiS is C-N bond cleavage. Rapid freeze quench EPR studies on Co(II)-substituted ImiS demonstrated the appearance of a rhombic signal after 10 ms that is assigned to a reaction intermediate that has a five-coordinate metal center. A distinct product (EP) complex was also observed and began to appear in 18-19 ms. When these results are taken together, they allow for a reaction mechanism to be offered for the B2 metallo-beta-lactamases and demonstrate that the mono- and dinuclear Zn(II)-containing enzymes share a common rate-limiting step, which is C-N bond cleavage.     

Biochemical and kinetic analysis of the GH3 family beta-xylosidase from Aspergillus awamori X-100

The beta-xylosidase from Aspergillus awamori X-100 belonging to the family 3 glycoside hydrolase revealed a distinctive transglycosylating ability to produce xylooligosaccharides with degree of polymerization more than 7. In order to explain this fact, the enzyme has been subjected to the detailed biochemical study. The enzymatic hydrolysis of p-nitrophenyl beta-D-xylopyranoside was found to occur with overall retention of substrate anomeric configuration suggesting cleavage of xylosidic bonds through a double-displacement mechanism. Kinetic study with aryl beta-xylopyranosides substrates, in which leaving group pK(a)s were in the range of 3.96-10.32, revealed monotonic function of log(k(cat)) and no correlation of log(k(cat)/Km) versus pKa values indicating deglycosylation as a rate-limiting step for the enzymatic hydrolysis. The classical bell-shaped pH dependence of k(cat)/Km indicated two ionizable groups in the beta-xylosidase active site with apparent pKa values of 2.2 and 6.4. The kinetic parameters of hydrolysis, Km and k(cat), of p-nitrophenyl beta-D-1,4-xylooligosaccharides were very close to those for hydrolysis of p-nitrophenyl-beta-D-xylopyranoside. Increase of p-nitrophenyl-beta-D-xylopyranoside concentration up to 80 mM led to increasing of the reaction velocity resulting in k(cat)(app)=81 s(-1). Addition of alpha-methyl D-xylopyranoside to the reaction mixture at high concentration of p-nitrophenyl-beta-D-xylopyranoside (50 mM) caused an acceleration of the beta-xylosidase-catalyzed reactions and appearance of a new transglycosylation product, alpha-methyl D-xylopyranosyl-1,4-beta-D-xylopyranoside, that was identified by 1H NMR spectroscopy. The kinetic model suggested for the enzymatic reaction was consistent with the results obtained.     

Product release is rate-limiting in the activation of the prodrug 5-fluorocytosine by yeast cytosine deaminase

Yeast cytosine deaminase (yCD), a zinc metalloenzyme, catalyzes the hydrolytic deamination of cytosine to uracil. The enzyme is of great biomedical interest because it also catalyzes the deamination of the prodrug 5-fluorocytosine (5FC) to form the anticancer drug 5-fluorouracil (5FU). yCD/5FC is one of the most widely used enzyme/prodrug combinations for gene-directed enzyme prodrug therapy for the treatment of cancers. A pH indicator assay has been developed for the measurement of the steady-state kinetic parameters for the deamination reaction. Transient kinetic studies have shown that the product release is a rate-limiting step in the activation of the prodrug 5FC by yCD. The rate constant of the chemical step for the forward reaction (250 s(-)(1)) is approximately 8 times that of the product release (31 s(-)(1)) and approximately 15 times k(cat) (17 s(-)(1)). The transient kinetic results are consistent with those of the steady-state kinetic analysis in the sense that the k(cat) and K(m) values calculated from the rate constants determined by the transient kinetic analysis are in close agreement with those measured by the steady-state kinetic analysis. NMR experiments have demonstrated that free 5FU is in slow exchange with its complex with yCD but has a low affinity for yCD. The transient kinetic and NMR results together suggest that the release of 5FU is rate-limiting in the activation of the prodrug 5FC by yCD and may involve multiple steps.     

Detailed dissection of a new mechanism for glycoside cleavage: alpha-1,4-glucan lyase

The unusual enzyme, Gracilariopsis alpha-1,4-glucan lyase of the sequence-related glycoside hydrolase family 31, cleaves the glycosidic bond of alpha-1,4-glucans via a beta-elimination reaction involving a covalent glycosyl-enzyme intermediate (Lee, S. S., Yu, S., and Withers, S. G. (2002) J. Am. Chem. Soc. 124, 4948-4949). The classical bell-shaped pH dependence of k(cat)/K(m) indicates two ionizable groups in the active site with apparent pK(a) values of 3.05 and 6.66. Br?nsted relationships of log k(cat) versus pK(a) and log(k(cat)/K(m)) versus pK(a) for a series of aryl glucosides both show a linear monotonic dependence on leaving group pK(a) with low beta(lg) values of 0.32 and 0.33, respectively. The combination of these low beta(lg) values with large secondary deuterium kinetic isotope effects (k(H)/k(D) = 1.16 - 1.19) on the first step indicate a glycosylation step with substantial glycosidic bond cleavage and proton donation to the leaving group oxygen at the transition state. Developed oxocarbenium ion character of the transition state is also suggested by the potent inhibition afforded by acarbose and 1-deoxynojirimycin (K(i) = 20 and 130 nM, respectively) and by the substantial rate reduction afforded by adjacent fluorine substitution. For only one substrate, 5-fluoro-alpha-D-glucopyranosyl fluoride, was the second elimination step shown to be rate-limiting. The large alpha-secondary deuterium kinetic isotope effect (k(H)/k(D) = 1.23) at C-1 and the small primary deuterium kinetic isotope effect (k(H)/k(D) = 1.92) at C-2 confirm an E2 mechanism with strong E1 character for this second step. This considerable structural and mechanistic similarity with retaining alpha-glucosidases is clear evidence for the evolution of an enzyme mechanism within the family.     

Direct measurement of acylenzyme hydrolysis demonstrates rate-limiting deacylation in cleavage of physiological sequences by the processing protease Kex2

Saccharomyces cerevisiae Kex2 protease is the prototype for the family of eukaryotic proprotein convertases that includes furin, PC1/3, and PC2. These enzymes belong to the subtilase superfamily of serine proteases and are distinguished from degradative subtilisins by structural features and by their much more stringent substrate specificity. Pre-steady-state studies have shown that both Kex2 and furin exhibit an initial burst of 7-amino-4-methylcoumarin release in cleavage of peptidyl methylcoumarinamide substrates that are based on physiological cleavage sites. Thus, in cleavage of such substrates, formation of the acylenzyme intermediate is fast relative to some later step (deacylation or N-terminal product release). This behavior is significant, because Kex2 also exhibits burst kinetics in cleavage of peptide bonds. k(cat) for cleavage of a tetrapeptidyl methylcoumarinamide substrate based on the physiological yeast substrate pro-alpha-factor exhibits a weak solvent isotope effect, but neither this isotope effect nor temperature dependence studies with this substrate conclusively identify the rate-limiting step for Kex2 cleavage of this substrate. We therefore developed an assay to measure deacylation directly by pulse-chase incorporation of H(2)(18)O in a rapid-quenched-flow mixer followed by mass spectrometric quantitation. The results given by this assay rule out rate-limiting product release for cleavage of this substrate by Kex2. These experiments demonstrate that cleavage of the acylenzyme ester bond, as opposed to either the initial attack on the amide bond or product release, is rate-limiting for the action of Kex2 at physiological sequences. This work demonstrates a fundamental difference in the catalytic strategy of proprotein processing enzymes and degradative subtilisins.     

Steady-state and pre-steady-state kinetic analysis of halopropane conversion by a rhodococcus haloalkane dehalogenase

Haloalkane dehalogenase from Rhodococcus rhodochrous NCIMB 13064 (DhaA) catalyzes the hydrolysis of carbon-halogen bonds in a wide range of haloalkanes. We examined the steady-state and pre-steady-state kinetics of halopropane conversion by DhaA to illuminate mechanistic details of the dehalogenation pathway. Steady-state kinetic analysis of DhaA with a range of halopropanes showed that bromopropanes had higher k(cat) and lower K(M) values than the chlorinated analogues. The kinetic mechanism of dehalogenation was further studied using rapid-quench-flow analysis of 1,3-dibromopropane conversion. This provided a direct measurement of the chemical steps in the reaction mechanism, i.e., cleavage of the carbon-halogen bond and hydrolysis of the covalent alkyl-enzyme intermediate. The results lead to a minimal mechanism consisting of four main steps. The occurrence of a pre-steady-state burst, both for bromide and 3-bromo-1-propanol, suggests that product release is rate-limiting under steady-state conditions. Combining pre-steady-state burst and single-turnover experiments indicated that the rate of carbon-bromine bond cleavage was indeed more than 100-fold higher than the steady-state k(cat). Product release occurred with a rate constant of 3.9 s(-1), a value close to the experimental k(cat) of 2.7 s(-1). Comparing the kinetic mechanism of DhaA with that of the corresponding enzyme from Xanthobacter autotrophicus GJ10 (DhlA) shows that the overall mechanisms are similar. However, whereas in DhlA the rate of halide release represents the slowest step in the catalytic cycle, our results suggest that in DhaA the release of 3-bromo-1-propanol is the slowest step during 1,3-dibromopropane conversion.     

Examining the relative timing of hydrogen abstraction steps during NAD(+)-dependent oxidation of secondary alcohols catalyzed by long-chain D-mannitol dehydrogenase from Pseudomonas fluorescens using pH and kinetic isotope effects

Mannitol dehydrogenases (MDH) are a family of Zn(2+)-independent long-chain alcohol dehydrogenases that catalyze the regiospecific NAD(+)-dependent oxidation of a secondary alcohol group in polyol substrates. pH and primary deuterium kinetic isotope effects on kinetic parameters for reaction of recombinant MDH from Pseudomonas fluorescens with D-mannitol have been measured in H(2)O and D(2)O at 25 degrees C and used to determine the relative timing of C-H and O-H bond cleavage steps during alcohol conversion. The enzymatic rates decreased at low pH; apparent pK values for log(k(cat)/K(mannitol)) and log k(cat) were 9.2 and 7.7 in H(2)O, respectively, and both were shifted by +0.4 pH units in D(2)O. Proton inventory plots for k(cat) and k(cat)/K(mannitol) were determined at pL 10.0 using protio or deuterio alcohol and were linear at the 95% confidence level. They revealed the independence of primary deuterium isotope effects on the atom fraction of deuterium in a mixed H(2)O-D(2)O solvent and yielded single-site transition-state fractionation factors of 0.43 +/- 0.05 and 0.47 +/- 0.01 for k(cat)/K(mannitol) and k(cat), respectively. (D)(k(cat)/K(mannitol)) was constant (1.80 +/- 0.20) in the pH range 6.0-9.5 and decreased at high pH to a limiting value of approximately 1. Measurement of (D)(k(cat)/K(fructose)) at pH 10.0 and 10.5 using NADH deuterium-labeled in the 4-pro-S position gave a value of 0.83, the equilibrium isotope effect on carbonyl group reduction. A mechanism of D-mannitol oxidation by MDH is supported by the data in which the partly rate-limiting transition state of hydride transfer is stabilized by a single solvation catalytic proton bridge. The chemical reaction involves a pH-dependent internal equilibrium which takes place prior to C-H bond cleavage and in which proton transfer from the reactive OH to the enzyme catalytic base may occur. Loss of a proton from the enzyme at high pH irreversibly locks the ternary complex with either alcohol or alkoxide bound in a conformation committed of undergoing NAD(+) reduction at a rate about 2.3-fold slower than the corresponding reaction rate of the protonated complex. Transient kinetic studies for D-mannitol oxidation at pH(D) 10.0 showed that the solvent isotope effect on steady-state turnover originates from a net rate constant of NADH release that is approximately 85% rate-limiting for k(cat) and 2-fold smaller in D(2)O than in H(2)O.     

Mechanistic and spectroscopic studies of metallo-β-lactamase NDM-1

In an effort to biochemically characterize metallo-β-lactamase NDM-1, we cloned, overexpressed, purified, and characterized several maltose binding protein (MBP)-NDM-1 fusion proteins with different N-termini (full-length, Δ6, Δ21, and Δ36). All MBP-NDM-1 fusion proteins were soluble; however, only one, MBP-NDM-1Δ36, exhibited high activity and bound 2 equiv of Zn(II). Thrombin cleavage of this fusion protein resulted in the truncated NDM-1Δ36 variant, which exhibited a k(cat) of 16 s(-1) and a K(m) of 1.1 μM when using nitrocefin as a substrate, bound 2 equiv of Zn(II), and was monomeric in solution. Extended X-ray absorption fine structure studies of the NDM-1Δ36 variant indicate the average metal binding site for Zn(II) in this variant consists of four N/O donors (two of which are histidines) and 0.5 sulfur donor per zinc, with a Zn-Zn distance of 3.38 ?. This metal binding site is very similar to those of other metallo-β-lactamases that belong to the B1 subclass. Pre-steady-state kinetic studies using nitrocefin and chromacef and the NDM-1Δ36 variant indicate that the enzyme utilizes a kinetic mechanism similar to that used by metallo-β-lactamases L1 and CcrA, in which a reactive nitrogen anion is stabilized and its protonation is rate-limiting. While they are very different in terms of amino acid sequence, these studies demonstrate that NDM-1 is structurally and mechanistically very similar to metallo-β-lactamase CcrA.     

²H kinetic isotope effects and pH dependence of catalysis as mechanistic probes of rat monoamine oxidase A: comparisons with the human enzyme

Monoamine oxidase A (MAO A) is a mitochondrial outer membrane-bound flavoenzyme important in the regulation of serotonin and dopamine levels. Because the rat is extensively used as an animal model in drug studies, it is important to understand how rat MAO A behaves in comparison with the more extensively studied human enzyme. For many reversible inhibitors, rat MAO A exhibits K(i) values similar to those of human MAO A. The pH profile of k(cat) for rat MAO A shows a pK(a) of 8.2 ± 0.1 for the benzylamine ES complex and pK(a) values of 7.5 ± 0.1 and 7.6 ± 0.1 for the ES complexes with p-CF(3)-(1)H- and p-CF(3)-(2)H-benzylamine, respectively. In contrast to the human enzyme, the rat enzyme exhibits a single pK(a) value (8.3 ± 0.1) with k(cat)/K(m) for benzylamine versus pH and pK(a) values of 7.8 ± 0.1 and 8.1 ± 0.2 for the ascending limbs, respectively, of k(cat)/K(m) versus pH profiles for p-CF(3)-(1)H- and p-CF(3)-(2)H-benzylamine and 9.3 ± 0.1 and 9.1 ± 0.2 for the descending limbs, respectively. The oxidation of para-substituted benzylamine substrate analogues by rat MAO A has large deuterium kinetic isotope effects on k(cat) and on k(cat)/K(m). These effects are pH-independent and range from 7 to 14, demonstrating a rate-limiting α-C-H bond cleavage step in catalysis. Quantitative structure-activity correlations of log k(cat) with the electronic substituent parameter (σ) at pH 7.5 and 9.0 show a dominant contribution with positive ρ values (1.2-1.3) and a pH-independent negative contribution from the steric term. Quantitative structure-activity relationship analysis of the binding affinities of the para-substituted benzylamine analogues for rat MAO A shows an increased van der Waals volume (V(w)) increases the affinity of the deprotonated amine for the enzyme. These results demonstrate that rat MAO A exhibits functional properties similar but not identical with those of the human enzyme and provide additional support for C-H bond cleavage via a polar nucleophilic mechanism.     

Kinetic studies of oxygen reactivity in soybean lipoxygenase-1

The reactivity of O(2) with soybean lipoxygenase-1 (SLO) has been examined using a range of kinetic probes. We are able to rule out diffusional encounter of O(2) with protein, an outer-sphere electron transfer to O(2), and proton transfer as rate-limiting steps in k(cat)/K(M)(O(2)) for wild-type enzyme (WT SLO); this restricts the rate-limiting step to either the combination of O(2) with L(*) or a subsequent conformational change. In the Ile(553) --> Phe mutant, which constricts the putative O(2) binding channel [Knapp et al. (2001) J. Am. Chem. Soc. 123, 2931-2932], k(cat)/K(M)(O(2)) decreases by over a factor of 20; yet, this mutant appears to have the same rate-limiting step as WT SLO. It is argued that the slow step on k(cat)/K(M)(O(2)) is the combination of O(2) with L(*), with proximal protein effects determining the rate of reaction. The available data for SLO support the view that enzymes can affect O(2) reactivity without a direct involvement of metal cofactors. The primary role of the Fe(3+) cofactor is to generate an enzyme-bound radical, while the protein is concluded to control the stereo- and regiochemistry of O(2) encounter with this radical.     

Oxidation of methoxyphenethylamines by cytochrome P450 2D6. Analysis of rate-limiting steps

Cytochrome P450 (P450) 2D6 is involved in the oxidation of a large fraction ( approximately 30%) of drugs used by humans and also catalyzes the O-demethylation of the model substrates 3- and 4-methoxyphenethylamine followed by subsequent ring hydroxylation to dopamine. Burst kinetics were not observed; rate-limiting step(s) must occur prior to product formation. Rates of reduction of ferric P450 2D6 were stimulated by 3- or 4-methoxyphenethylamine or the inhibitor quinidine; reduction is not the most rate-limiting step. The non-competitive intramolecular deuterium isotope effect, an estimate of the intrinsic isotope effect, for 4-methoxyphenethylamine O-demethylation was 9.6. Intermolecular non-competitive deuterium isotope effects of 3.1-3.8 were measured for k(cat) and k(cat)/K(m) for both O-demethylation reactions, implicating at least partially rate-limiting C-H bond breaking. Simulation of steady-state kinetic data yielded a catalytic mechanism dominated by the rates of (i) Fe(2+)O(2)(-) protonation (plus O-O bond scission) and (ii) C-H bond breaking, consistent with the appearance of the spectral intermediates in the steady state, attributed to iron-oxygen complexes. However, all the rates of individual steps (or rates of combined steps) are considerably higher than k(cat), and the contributions of several steps must be considered in understanding rates of the P450 2D6 reactions.     

Kinetic investigations of the rate-limiting step in human 12- and 15-lipoxygenase

Mammalian lipoxygenases have been implicated in several inflammatory disorders; however, the details of the kinetic mechanism are still not well understood. In this paper, human platelet 12-lipoxygenase (12-hLO) and human reticulocyte 15-lipoxygenase-1 (15-hLO) were tested with arachidonic acid (AA) and linoleic acid (LA), respectively, under a variety of changing experimental conditions, such as temperature, dissolved oxygen concentration, and viscosity. The data that are presented show that 12-hLO and 15-hLO have slower rates of product release (k(cat)) than soybean lipoxygenase-1 (sLO-1), but similar or better rates of substrate capture for the fatty acid (k(cat)/K(M)) or molecular oxygen [k(cat)/K(M(O)2)]. The primary, kinetic isotope effect (KIE) for 15-hLO with LA was determined to be temperature-independent and large ((D)k(cat) = 40 +/- 8), over the range of 10-35 degrees C, indicating that C-H bond cleavage is the sole rate-limiting step and proceeds through a tunneling mechanism. The (D)k(cat)/K(M) for 15-hLO, however, was temperature-dependent, consistent with our previous results [Lewis, E. R., Johansen, E., and Holman, T. R. (1999) J. Am. Chem. Soc. 121, 1395-1396], indicating multiple rate-limiting steps. This was confirmed by a temperature-dependent, k(cat)/K(M) solvent isotope effect (SIE), which indicated a hydrogen bond rearrangement step at low temperatures, similar to that of sLO-1 [Glickman, M. H., and Klinman, J. P. (1995) Biochemistry 34, 14077-14092]. The KIE could not be determined for 12-hLO due to its inability to efficiently catalyze LA, but the k(cat)/K(M) SIE was temperature-independent, indicating distinct rate-limiting steps from both 15-hLO and sLO-1.     

Engineering the substrate specificity of Staphylococcus aureus Sortase A. The beta6/beta7 loop from SrtB confers NPQTN recognition to SrtA

The Staphylococcus aureus transpeptidase Sortase A (SrtA) anchors virulence and colonization-associated surface proteins to the cell wall. SrtA selectively recognizes a C-terminal LPXTG motif, whereas the related transpeptidase Sortase B (SrtB) recognizes a C-terminal NPQTN motif. In both enzymes, cleavage occurs after the conserved threonine, followed by amide bond formation between threonine and the pentaglycine cross-bridge of cell wall peptidoglycan. Genetic and biochemical studies strongly suggest that SrtA and SrtB exhibit exquisite specificity for their recognition motifs. To better understand the origins of substrate specificity within these two isoforms, we used sequence and structural analysis to predict residues and domains likely to be involved in conferring substrate specificity. Mutational analyses and domain swapping experiments were conducted to test their function in substrate recognition and specificity. Marked changes in the specificity profile of SrtA were obtained by replacing the beta6/beta7 loop in SrtA with the corresponding domain from SrtB. The chimeric beta6/beta7 loop swap enzyme (SrtLS) conferred the ability to acylate NPQTN-containing substrates, with a k(cat)/K(m)(app) of 0.0062 +/- 0.003 m(-1) s(-1). This enzyme was unable to perform the transpeptidation stage of the reaction, suggesting that additional domains are required for transpeptidation to occur. The overall catalytic specificity profile (k(cat)/K(m)(app)(NPQTN)/k(cat)/K(m)(app)(LPETG)) of SrtLS was altered 700,000-fold from SrtA. These results indicate that the beta6/beta7 loop is an important site for substrate recognition in sortases.     

Mutagenesis of the conserved active-site tyrosine changes a retaining sialidase into an inverting sialidase

Mutagenesis of the conserved tyrosine (Y370) of the Micromonospora viridifaciens sialidase changes the mechanism of catalysis from retention of anomeric configuration to an unprecedented inverting mechanism in which water efficiently functions as the nucleophile. Three mutants, Y370A, Y370D, and Y370G, were produced recombinantly in Escherichia coli, and all are catalytically active against the activated substrate 4-methylumbelliferyl alpha-D-N-acetylneuraminide. The Y370D mutant was also shown to catalyze the hydrolysis of natural substrate analogues such as 3'-sialyllactose. A comparison of the pH-rate profiles for the wild-type and the Y370D mutant sialidase reveals no major differences, although with respect to the kinetic term k(cat)/K(m), an ionized form of the aspartate-370 enzyme is catalytically compromised. For the wild-type enzyme, the value of the Br?nsted parameter beta(lg) on k(cat) is 0.02 +/- 0.03, while for the Y370D mutant sialidase beta(lg) = -0.55 +/- 0.03 for the substrates with bad leaving groups. Thus, for the wild-type enzyme, a nonchemical step(s) is rate-limiting, but for the tyrosine mutant cleavage of the glycosidic C-O bond is rate-determining. The Br?nsted slopes derived for the kinetic parameter k(cat)/K(m) display a similar trend (beta(lg) -0.30 +/- 0.04 and -0.74 +/- 0.04 for the wild-type and Y370D, respectively). These results reveal that the tyrosine residue lowers the activation free energy for cleavage of 6'-sialyllactose, a natural substrate analogue, by more than 24.9 kJ mol(-1). Evidence is presented that the mutant sialidases operate by a dissociative mechanism, and the wild-type enzyme operates by a concerted mechanism.     

Mechanistic studies of 1-aminocyclopropane-1-carboxylate deaminase: characterization of an unusual pyridoxal 5'-phosphate-dependent reaction

1-Aminocyclopropane-1-carboxylic acid (ACC) deaminase (ACCD) is a pyridoxal 5'-phosphate (PLP)-dependent enzyme that cleaves the cyclopropane ring of ACC, to give α-ketobutyric acid and ammonia as products. The cleavage of the C(α)-C(β) bond of an amino acid substrate is a rare event in PLP-dependent enzyme catalysis. Potential chemical mechanisms involving nucleophile- or acid-catalyzed cyclopropane ring opening have been proposed for the unusual transformation catalyzed by ACCD, but the actual mode of cyclopropane ring cleavage remains obscure. In this report, we aim to elucidate the mechanistic features of ACCD catalysis by investigating the kinetic properties of ACCD from Pseudomonas sp. ACP and several of its mutant enzymes. Our studies suggest that the pK(a) of the conserved active site residue, Tyr294, is lowered by a hydrogen bonding interaction with a second conserved residue, Tyr268. This allows Tyr294 to deprotonate the incoming amino group of ACC to initiate the aldimine exchange reaction between ACC and the PLP coenzyme and also likely helps to activate Tyr294 for a role as a nucleophile to attack and cleave the cyclopropane ring of the substrate. In addition, solvent kinetic isotope effect (KIE), proton inventory, and (13)C KIE studies of the wild type enzyme suggest that the C(α)-C(β) bond cleavage step in the chemical mechanism is at least partially rate-limiting under k(cat)/K(m) conditions and is likely preceded in the mechanism by a partially rate-limiting step involving the conversion of a stable gem-diamine intermediate into a reactive external aldimine intermediate that is poised for cyclopropane ring cleavage. When viewed within the context of previous mechanistic and structural studies of ACCD enzymes, our studies are most consistent with a mode of cyclopropane ring cleavage involving nucleophilic catalysis by Tyr294.     

Novel mechanism of hydrolysis of therapeutic beta-lactams by Stenotrophomonas maltophilia L1 metallo-beta-lactamase.

Stopped-flow tryptophan fluorescence under single turnover and pseudo-first-order conditions has been used to investigate the kinetic mechanism of beta-lactam hydrolysis by the Stenotrophomonas maltophilia L1 metallo-beta-lactamase. For the cephalosporin substrates nitrocefin and cefaclor and the carbapenem meropenem, a substantial quench of fluorescence is observed on association of substrate with enzyme. We have assigned this to a rearrangement event subsequent to formation of an initial collision complex. For the colorimetric compound nitrocefin, decay of this dark inter- mediate represents the overall rate-determining step for the reaction and is equivalent to decay of a previously observed state in which the beta-lactam amide bond has already been cleaved. For both cefaclor and meropenem, the rate-determining step for hydrolysis is loss of a second, less quenched state, in which, however, the beta-lactam amide bond remains intact. We suggest, therefore, that the mechanism of hydrolysis of nitrocefin by binuclear metallo-beta-lactamases may be atypical and that cleavage of the beta-lactam amide bond is the rate-determining step for breakdown of the majority of beta-lactam substrates by the L1 enzyme.     

Do enzymes change the nature of transition states? Mapping the transition state for general acid-base catalysis of a serine protease

The properties of the transition state for serine protease-catalyzed hydrolysis of an amide bond were determined for a series of subtilisin variants from Bacillus lentus. There is no significant change in the structure of the enzyme upon introduction of charged mutations S156E/S166D, suggesting that changes in catalytic activity reflect global properties of the enzyme. The effect of charged mutations on the pK(a) of the active site histidine-64 N(epsilon)(2)-H was correlated with changes in the second-order rate constant k(cat)/K(m) for hydrolysis of tetrapeptide anilides at low ionic strength with a Br?nsted slope alpha = 1.1. The solvent isotope effect (D)2(O)(k(cat)/K(m))(1) = 1.4 +/- 0.2. These results are consistent with a rate-limiting breakdown of the tetrahedral intermediate in the acylation step with hydrogen bond stabilization of the departing amine leaving group. There is an increase in the ratio of hydrolysis of succinyl-Ala-Ala-Pro-Phe-anilides for p-nitroaniline versus aniline leaving groups with variants with more basic active site histidines that can be described by the interaction coefficient p(xy) = delta beta(lg)/delta pK(a) (H64) = 0.15. This is attributed to increased hydrogen bonding of the active site imidazolium N-H to the more basic amine leaving group as well as electrostatic destabilization of the transition state. A qualitative characterization of the transition state is presented in terms of a reaction coordinate diagram that is defined by the structure-reactivity parameters.     

Identification of an unusual AT(D)Pase-like activity in multifunctional NAD glycohydrolase from the venom of Agkistrodon acutus

NAD-glycohydrolases (NADases) are ubiquitous enzymes that possess NAD glycohydrolase, ADPR cyclase or cADPR hydrolase activity. All these activities are attributed to the NADase-catalyzed cleavage of C-N glycosyl bond. AA-NADase purified from the venom of Agkistrodon acutus is different from the known NADases, for it consists of two chains linked with disulfide-bond(s) and contains one Cu(2+) ion. Here, we show that AA-NADase is not only able to cleave the C-N glycosyl bond of NAD to produce ADPR and nicotinamide, but also able to cleave the phosphoanhydride linkages of ATP, ADP and AMP-PNP to yield AMP. AA-NADase selectively cleaves the P-O-P bond of ATP, ADP and AMP-PNP without the cleavage of P-O-P bond of NAD. The hydrolysis reactions of NAD, ATP and ADP catalyzed by AA-NADase are mutually competitive. ATP is the excellent substrate for AA-NADase with the highest specificity constant k(cat)/K(m) of 293+/-7mM(-1)s(-1). AA-NADase catalyzes the hydrolysis of ATP to produce AMP with an intermediate ADP. AA-NADase binds with one AMP with high affinity determined by isothermal titration calorimetry (ITC). AMP is an efficient inhibitor against NAD. AA-NADase has so far been identified as the first unique multicatalytic enzyme with both NADase and AT(D)Pase-like activities.     

Kinetic study of the catalytic mechanism of mannitol dehydrogenase from Pseudomonas fluorescens.

To characterize catalysis by NAD-dependent long-chain mannitol 2-dehydrogenases (MDHs), the recombinant wild-type MDH from Pseudomonas fluorescens was overexpressed in Escherichia coli and purified. The enzyme is a functional monomer of 54 kDa, which does not contain Zn(2+) and has B-type stereospecificity with respect to hydride transfer from NADH. Analysis of initial velocity patterns together with product and substrate inhibition patterns and comparison of primary deuterium isotope effects on the apparent kinetic parameters, (D)k(cat), (D)(k(cat)/K(NADH)), and (D)(k(cat)/K(fructose)), show that MDH has an ordered kinetic mechanism at pH 8.2 in which NADH adds before D-fructose, and D-mannitol and NAD are released in that order. Isomerization of E-NAD to a form which interacts with D-mannitol nonproductively or dissociation of NAD from the binary complex after isomerization is the slowest step (>/=110 s(-)(1)) in D-fructose reduction at pH 8.2. Release of NADH from E-NADH (32 s(-)(1)) is the major rate-limiting step in mannitol oxidation at this pH. At the pH optimum for D-fructose reduction (pH 7.0), the rate of hydride transfer contributes significantly to rate limitation of the catalytic cascade and the overall reaction. (D)(k(cat)/K(fructose)) decreases from 2.57 at pH 7.0 to a value of 相似文献   

Role of Thr(66) in porcine NADH-cytochrome b5 reductase in catalysis and control of the rate-limiting step in electron transfer

Site-directed mutagenesis of Thr(66) in porcine liver NADH-cytochrome b(5) reductase demonstrated that this residue modulates the semiquinone form of FAD and the rate-limiting step in the catalytic sequence of electron transfer. The absorption spectrum of the T66V mutant showed a typical neutral blue semiquinone intermediate during turnover in the electron transfer from NADH to ferricyanide but showed an anionic red semiquinone form during anaerobic photoreduction. The apparent k(cat) values of this mutant were approximately 10% of that of the wild type enzyme (WT). These data suggest that the T66V mutation stabilizes the neutral blue semiquinone and that the conversion of the neutral blue to the anionic red semiquinone form is the rate-limiting step. In the WT, the value of the rate constant of FAD reduction (k(red)) was consistent with the k(cat) values, and the oxidized enzyme-NADH complex was observed during the turnover with ferricyanide. This indicates that the reduction of FAD by NADH in the WT-NADH complex is the rate-limiting step. In the T66A mutant, the k(red) value was larger than the k(cat) values, but the k(red) value in the presence of NAD(+) was consistent with the k(cat) values. The spectral shape of this mutant observed during turnover was similar to that during the reduction with NADH in the presence of NAD(+). These data suggest that the oxidized T66A-NADH-NAD(+) ternary complex is a major intermediate in the turnover and that the release of NAD(+) from this complex is the rate-limiting step. These results substantiate the important role of Thr(66) in the one-electron transfer reaction catalyzed by this enzyme. On the basis of these data, we present a new kinetic scheme to explain the mechanism of electron transfer from NADH to one-electron acceptors including cytochrome b(5).