Sixth and seventh cusp on lower molar teeth of Icelanders

The occurrence of lower molar accessory cusps c6 and c7 is studied in three local populations of known Caucasoid origin in the Northeast of Iceland. The sample comprises 1,010 school-children, 506 boys and 504 girls. The scoring is made from dental stone casts with reference to standard plaques. Only the frequency of c6 on the second deciduous molar is relatively low as expected in a Caucasoid population. Otherwise both c6 and c7 are more common than expected, the frequencies are in fact comparable to those predicted by the Mongoloid dental complex for Mongoloid populations.     

Torus mandibularis among Icelanders

Nine hundred and seventy-six Icelandic schoolchildren (489 ♂ and 487♀) were surveyed for occurrence of torus mandibularis. No sexual dimorphism was observed but there was a statistically significant difference between areas. A highly significant positive association between age and frequency of occurrence and size was also observed. Single tori were more prevalent than multiple ones and also appeared earlier. Symmetrical occurrence predominated, but when unilateral, tori were more often found on the right side. Secular changes in the incidence of torus mandibularis among Icelanders suggest the strong influence of environmental factors.     

Torus palatinus in Icelandic schoolchildren

Three populations in South- and North-Thingeyjarsyslas, Northeast Iceland, were surveyed for the presence of torus palatinus. A total of 987 schoolchildren (489 male and 487 female) were examined. A statistically significant difference was noted between the prevalence in South-Thingeyjarsysla (33.3%) and North-Thingeyjarsysla (14.6%). Prevalence and size were affected by age and population but not by sex. An association between torus palatinus and torus mandibularis was not found. Secular changes in the occurrence of torus palatinus in Icelanders emphasize the importance of environmental etiological factors and diminish the value of torus palatinus as a racial trait.     

Intra- and interobserver concordance in classifying dental morphology

A sample of 50 Kodiak Island Eskimo dental casts were observed, using standard reference plaques, three times by one observer and once by a second observer, for 47 graded and discrete morphological characters of the dentition and jaws. Although the frequency of both intra- and interobserver scoring differences between observation sessions are relatively high for some characters, statistical analysis reveals that differences are largely random in direction and cancel out. Most dental morphological variants can be observed in a ranked fashion with adequate within- and between-observer reliability. However, four traits present both within- and between-observer difficulties: the tuberculum dentale, the canine distal accessory ridge, marginal accessory cusps of the upper first premolar, and the anterior fovea on the lower first molar.     

Comparative study of the upper molar occlusal table morphology among seven human populations

Three-dimensional morphology of the occlusal table of the upper first molars was compared in seven racial populations. Materials were moiré contourograms collected by ourselves over 5 years. Intercuspal distances and cuspal heights were comparatively studied in this analysis. When the populations were arranged in the order of these sizes, their arrangements based on intercuspal distances and cuspal heights were quite different from each other. When intercuspal distances were scaled by protocone-paracone distance, the distances connecting distal cusps were significantly smaller in Mongoloids (Japanese and Eskimo) than in Caucasoids (Dutch and Asiatic Indian), which suggests a reduction tendency of distal cusps in Mongoloids. This tendency was intermediate in Negroids and Australoid. Principal coordinate analysis was carried out on the basis of a similarity matrix including both intercuspal distances and cuspal heights. The result suggested that the three-dimensional shape of the occlusal table was distinguishable in four representative racial populations.     

Protostylid expression at the enamel-dentine junction and enamel surface of mandibular molars of Paranthropus robustus and Australopithecus africanus

Distinctive expressions and incidences of discrete dental traits at the outer enamel surface (OES) contribute to the diagnoses of many early hominin taxa. Examination of the enamel-dentine junction (EDJ), imaged non-destructively using micro-computed tomography, has elucidated the morphological development of dental traits and improved interpretations of their variability within and among taxa. The OES expressions of one of these dental traits, the protostylid, have been found to differ among African Plio-Pleistocene fossil hominin taxa. In this study protostylid expression is examined at the OES and at the EDJ of Paranthropus robustus (n = 23) and Australopithecus africanus (n = 28) mandibular molars, with the goals of incorporating EDJ morphology into the definition of the protostylid and assessing the relative contribution of the EDJ and enamel cap to its expression in these taxa. The results provide evidence a) of statistically significant taxon-specific patterns of protostylid morphology at the EDJ that are not evident at the OES; b) that in P. robustus, thick enamel reduces the morphological correspondence between the form of the protostylid seen at the EDJ and the OES, and c) that if EDJ images can be obtained, then the protostylid retains its taxonomic value even in worn teeth.     

Brief communication: Variation in the frequency and form of the lower permanent molar middle trigonid crest

The frequency and form of the middle trigonid crest (MTC) in lower permanent molars is reported for 1,131 dental casts of Bushman (San), Bantu, Solomons, Hawaiians, Pima, Eskimo, Navajo, Chinese, and American whites. The MTC occurs most often on the first molar. We found very little intra-trait variation, so observations were scored on a present-absent basis. The MTC is most frequent in the African samples and rare in those of the other populations. Two reference plaques can be obtained to add to the existing series in the ASU dental anthropology system. © 1993 Wiley-Liss, Inc.     

Major features of Sundadonty and Sinodonty, including suggestions about East Asian microevolution, population history, and late Pleistocene relationships with Australian aboriginals

The eight diagnostic morphological traits of the Sundadont and Sinodont divisions of the Mongoloid dental complex are identified. Intra- and intergroup variation for these crown and root features is plotted. The univariate frequency distributions provide useful evidence for several suggestions about East Asian prehistory, dental microevolution, and intergroup relationships. The case for local evolution of Sundadonty is strengthened by finding Australian teeth to be very similar to this pattern. Australian Aboriginal teeth are also generally like those of Jomonese and some Ainus, suggesting that members of the late Pleistocene Sundaland population could have initially colonized Sahulland as well as the continental shelf of East Asia northward to Hokkaido.     

The metaconule: A morphologic and familial analysis of a molar cusp in humans

Incidence and size variability of the metaconule, an accessory maxillary molar cusp, is analyzed in a series of 1,217 living Melanesians. The range of morphologic variation is quantified on a six-grade ordinal scale developed to standardize observations. Total incidence of the metaconule decreases along a mesial-to-distal gradient, while mean size and size variability increase from M1 to M3. So, while the trait is less common on distal molars, it is on average larger. Estimation of the additive genetic component is 65% for the first molar but only 15% for the second. Trait incidence and heritability estimates are generally higher for females indicating the need for separate analysis by sex.     

The depth of the lingual fossa in permanent incisors of Norwegians. I. Method of measurement, statistical distribution and sex dimorphism

The depth of the incisor lingual fossa in permanent extracted incisors and plaster casts of Norwegians was examined. It was shown that plaster casts are well suited for measurements of lingual fossa depth, and that the measurements can be performed with great accuracy. Skewness values showed the symmetry of the distribution to decrease with decreasing mean lingual fossa depth. Kurtosis was found small in maxillary incisors, in mandibular outside the limits for normal theory. The distribution of the depth of the lingual fossa cannot generally be described as normal. No sex differences were found. The inheritance of this trait in Norwegians is probably not sex linked.     

Expression of the entoconulid (sixth cusp) on mandibular molar teeth of an Australian aboriginal population

The expression and genetic basis of the entoconulid (sixth cusp) on mandibular molars were examined in a geographically isolated group of aboriginals from Yuendumu in the Northern Territory of Australia. Four grades of trait expression, ranging from trace to small, medium, and large cusps, were defined on dental casts of 399 subjects. Frequencies of occurrence were among the highest reported in human populations. Approximately 80% of dm2s showed the trait, whereas frequencies in the permanent dentition ranged from around 50% on M2 to 70% on M1 and 80% on M3. The degree of expression increased distally along the molar series, with only 3% of dm2s showing large cusps compared with 25% of M3s. Fluctuating asymmetry was highest for M2 and lowest for dm2. No strong evidence for sexual dimorphism in occurrence or degree of expression was found. Based on a quasi-continuous threshold model, a genetic contribution to entoconulid variability was observed that was strongest for M1. Significant associations were noted between entoconulid expression on mandibular molars and metaconule expression on maxillary molars, indicating that similar developmental mechanisms may influence these traits. The entoconulid and the metaconule both provide additional bulk on the distal occlusal surface of molar teeth, an area subjected to early wear during mastication in aboriginals.     

Expression count: a method for calculating morphological dental trait frequencies by using adjustable weighting coefficients with standard ranked scales

Expression count is the term used for a new method of calculating the frequency of a morphological dental trait in a population sample. This method incorporates into a single value the total trait variation expressed in the sample. It has been designed to increase the information content of small samples of dental remains common with archeological recovery.     

陕西陇县战国时代人类牙齿形态特征

本文记述了陕西县出土的战国时代人类牙齿形态特征。数据对比和统计分析显示：与华北新石器时代人类相比,陇县人类牙齿形态特征除具有典型蒙古人种的共同特点外,与现代华北人更为接近。作者认为在近一万年内华北地区人类在体质特征上经历了某种规律性的演化过程,其表现特点是朝向现代华北人的方向转变。这一过程反映了东北亚地区人类在这一特定时间内体质特征的微观演化趋势。     

Dental remains from Dmanisi (Republic of Georgia): morphological analysis and comparative study

The systematic excavation of the Dmanisi site (Republic of Georgia) has provided the earliest evidence of hominins outside Africa, dating back to ca. 1.8Ma. The analysis of the hominin remains has mainly focused on the morphology of the crania and mandibles. We present the first detailed morphological analysis and comparison of the Dmanisi teeth. The dental evidence from Dmanisi shows a unique combination of primitive and derived traits. In general, although the Dmanisi dental fossils show primitive morphology that resembles that seen in Australopithecus and H. habilis, they also display some derived characteristics, particularly in relation to dental reduction, resembling that seen in the dentition of H. erectus from the Far East.     

Genetic structure of a tribal population, the Yanomama Indians. XIII. Dental microdifferentiation.

Data are presented on the frequency of the following eight dental traits in 635 Yanomama and 65 Makiritare Indians: upper central incisor rotation or winging, shoveling of maxillary incisors, maxillary molar hypocone reduction, Carabelli's trait, mandibular molar cusp number, mandibular molar cusp pattern rotation of second lower premolar, and pattern of second lower premolar cusps. Yanomama dentition is unusual in the high frequency of six cusps on the mandibular molars. There is marked dental microdifferentiation between villages; significant agreement was observed between a matrix of pairwise "dental distances" based on six morphological traits and corresponding matrices based on 11 genetic systems and on geographic location.     

Complex segregation analysis of dental morphological variants

A set of 20 morphological variants of the dental crowns and four characteristics of the jaws are tested for probable mode of inheritance using the complex segregation analysis method of Morton et al. (Am. J. Hum. Genet. 23:602-611, 1971). Models tested include three two-allele single-locus models (dominant, codominant, and recessive) and a model employing the polychotomized normal distribution of liability (an additive polygenic model), with transmissibility estimated via maximum likelihood. Most of the traits studied are observed using ordinal scales with several grades, and many are tested using more than one dichotomy of their scale. These multiple analyses allow for an examination of such factors as trait incidence on the results of the statistical analysis. The results of the analysis yield propositions of major genes for 13 of the 24 traits examined. Two traits give good evidence of being polygenic in origin. The remaining nine characters present methodological problems that do not allow for a definite conclusion on their mode of inheritance at this time. The ability to test varying levels of transmissibility in the polygenic model allows for an estimation of the percentage of trait variance determined by familial factors. Estimates of transmissibility for all characters examined range from 0 to 1, with a mean of 0.36. These findings may suggest a large environmental role in the development of dental crown morphology. However, the possibility exists that difficulties in the ability to classify the expression of certain traits consistently result in overestimates of the environmental influences on the development of those characters.     

Dental topography and diets of Australopithecus afarensis and early Homo

Diet is key to understanding the paleoecology of early hominins. We know little about the diets of these fossil taxa, however, in part because of a limited fossil record, and in part because of limitations in methods available to infer their feeding adaptations. This paper applies a new method, dental topographic analysis, to the inference of diet from fossil hominin teeth. This approach uses laser scanning to generate digital 3D models of teeth and geographic information systems software to measure surface attributes, such as slope and occlusal relief. Because it does not rely on specific landmarks that change with wear, dental topographic analysis allows measurement and comparison of variably worn teeth, greatly increasing sample sizes compared with techniques that require unworn teeth. This study involved comparison of occlusal slope and relief of the lower second molars of Australopithecus afarensis (n=15) and early Homo (n=8) with those of Gorilla gorilla gorilla (n=47) and Pan troglodytes troglodytes (n=54). Results indicate that while all groups show reduced slope and relief in progressively more worn specimens, there are consistent differences at given wear stages among the taxa. Early Homo shows steeper slopes and more relief than chimpanzees, whereas A. afarensis shows less slope and relief than any of the other groups. The differences between the two hominin taxa are on the same order as those between the extant apes, suggesting similar degrees of difference in diet. Because these chimpanzees and gorillas differ mostly in fallback foods where they are sympatric, results suggest that the early hominins may likewise have differed mostly in fallback foods, with A. afarensis emphasizing harder, more brittle foods, and early Homo relying on tougher, more elastic foods.