Mapping shifts in nanopore signal to changes in protein and protein-DNA conformation

Solid-state nanopores have been used extensively in biomolecular studies involving DNA and proteins. However, the interpretation of signals generated by the translocation of proteins or protein-DNA complexes remains challenging. Here, we investigate the behavior of monovalent streptavidin and the complex it forms with short biotinylated DNA over a range of nanopore sizes, salts, and voltages. We describe a simple geometric model that is broadly applicable and employ it to explain observed variations in conductance blockage and dwell time with experimental conditions. The general approach developed here underscores the value of nanopore-based protein analysis and represents progress toward the interpretation of complex translocation signals.     

A Theoretical Study of Single-Cell Electroporation in a Microchannel

Electroporation of a single cell in a microchannel was studied. The effects of electrical (e.g., strength of the electric pulse) and geometrical (e.g., microchannel height, electrode size and position) parameters on cell membrane permeabilization were investigated. The electrodes were assumed to be embedded in the walls of the microchannel; the cell was suspended between these two electrodes. By keeping the electric pulse constant, increasing the microchannel height reduces the number and the radius of the biggest nanopores, as well as the electroporated area of the cell membrane. If the width of the electrodes is bigger than the cell diameter, the transmembrane potential will be centralized and have a sinusoidal distribution around the cell if nanopores are not generated. As the width of the electrode decreases and becomes smaller than the cell diameter, the local transmembrane potential decreases; in the nonelectroporative area, the transmembrane potential distribution deviates from the sinusoidal behavior; the induced transmembrane potential also concentrates around the poles of the cell membrane (the nearest points of the cell membrane to the electrodes). During cell membrane permeabilization, the biggest nanopores are initially created at the poles and then the nanopore population expands toward the equator. The number of the created nanopores reaches its maximal value within a few microseconds; further presence of the electric pulse may not influence the number and location of the created nanopores anymore but will develop the generated nanopores. Strengthening the electric pulse intensifies the size and number of the created nanopores as well as the electroporated area on the cell membrane.     

Specificity of the Pseudomonas aeruginosa PAO1 lipoprotein I gene as a DNA probe and PCR target region within the Pseudomonadaceae.

The lipoprotein I gene (oprI) of Pseudomonas aeruginosa PAO1 was cloned and sequenced. A high degree of homology was found between our cloned PAO1 gene sequence and two published oprI sequences. Specific oligonucleotides were designed to amplify the oprI gene by the polymerase chain reaction (PCR). The potential of either the complete gene sequence or the specific oligonucleotide primers as a tool for rapid strain identification was directly assessed against bacterial colonies by PCR or against purified genomic DNA by Southern blot analysis, using a number of representative strains within the Pseudomonadaceae. The oprI gene was found to be well conserved within RNA group I.     

Insertion state of modular protein nanopores into a membrane

In the past decade, significant progress has been made in the development of new protein nanopores. Despite these advancements, there is a pressing need for the creation of nanopores equipped with relatively large functional groups for the sampling of biomolecular events on their extramembranous side. Here, we designed, produced, and analyzed protein nanopores encompassing a robust truncation of a monomeric β-barrel membrane protein. An exogenous stably folded protein was anchored within the aqueous phase via a flexible peptide tether of varying length. We have extensively examined the pore-forming properties of these modular protein nanopores using protein engineering and single-molecule electrophysiology. This study revealed distinctions in the nanopore conductance and current fluctuations that arose from tethering the exogenous protein to either the N terminus or the C terminus. Remarkably, these nanopores insert into a planar lipid membrane with one specific conductance among a set of three substate conductance values. Moreover, we demonstrate that the occurrence probabilities of these insertion substates depend on the length of the peptide tether, the orientation of the exogenous protein with respect to the nanopore opening, and the molecular mass of tethered protein. In addition, the three conductance values remain unaltered by major changes in the composition of modular nanopores. The outcomes of this work serve as a platform for further developments in areas of protein engineering of transmembrane pores and biosensor technology.     

Phenylarsine oxide interferes with the death inducing signaling complex and inhibits tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) induced apoptosis

The mechanism by which tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) induces death is the subject of intense scrutiny due to its preferential targeting of transformed cells for deletion. Based on recent findings that the TRAIL-dependent death inducing signaling complex (DISC) forms and signals at the plasma membrane without being internalized, we investigated the possibility that agents that prevent endocytosis may stabilize the surface bound DISC and thereby enhance TRAIL-dependent signaling. We utilized phenylarsine oxide (PAO), a trivalent arsenical that has been reported to inhibit endocytosis and to induce mitochondrial permeability transition. Therefore PAO could, by two separate and independent activities, enhance TRAIL-induced killing. Paradoxically, we found that rather than synergizing with TRAIL, PAO was an effective inhibitor of TRAIL-induced killing. Recruitment of FADD and caspase-8 to the TRAIL-dependent DISC was diminished in a concentration-dependent manner in cells exposed to PAO. The effects of PAO could not be reversed by washing cells under non-reducing conditions, suggesting covalent linkage of PAO with its cellular target(s); however, 2,3-dimercaptoethanol effectively overcame the inhibitory action of PAO and restored sensitivity to TRAIL-induced apoptosis. PAO inhibited formation of the TRAIL-dependent DISC and therefore prevented all subsequent apoptotic events.     

Biochemical studies on pili isolated from Pseudomonas aeruginosa strain PAO.

Pseudomonas aeruginosa strains PAO and PAK bear polar pili which are flexible filaments having a diameter of 6 nm and an average length of 2500 nm. Both types of pili are retractile and promote infection by a number of bacteriophages. The present communication describes the partial biochemical characterization of PAO pili isolated from a multipiliated nonretractile mutant of PAO. The observed properties are compared to those of PAK pili which were characterized previously. PAO pili were found to contain a single polypeptide subunit of 18 700 daltons. This is similar to PAK pili which contain a single polypeptide of 18 100 daltons. The amino acid composition of PAO pilin was also similar to that of PAK pilin. Neither protein contained phosphate or carbohydrate residues and both were found to contain N-methylphenylalanine at the amino terminus. Sequencing of 20 amino acid residues at the amino terminal end of PAO pilin revealed the sequence to be identical with that of PAK pilin, while tryptic peptide analyses of PAO and PAK pilin indicated that the two proteins probably contain a number of homologous regions within the polypeptide. It was concluded that PAO and PAK pili were closely related structures.     

Flow-through lipid nanotube arrays for structure-function studies of membrane proteins by solid-state NMR spectroscopy

A novel method for studying membrane proteins in a native lipid bilayer environment by solid-state NMR spectroscopy is described and tested. Anodic aluminum oxide (AAO) substrates with flow-through 175 nm wide and 60-mum-long nanopores were employed to form macroscopically aligned peptide-containing lipid bilayers that are fluid and highly hydrated. We demonstrate that the surfaces of both leaflets of such bilayers are fully accessible to aqueous solutes. Thus, high hydration levels as well as pH and desirable ion and/or drug concentrations could be easily maintained and modified as desired in a series of experiments with the same sample. The method allows for membrane protein NMR experiments in a broad pH range that could be extended to as low as 1 and as high as 12 units for a period of up to a few hours and temperatures as high as 70 degrees C without losing the lipid alignment or bilayers from the nanopores. We demonstrate the utility of this method by a solid-state 19.6 T (17)O NMR study of reversible binding effects of mono- and divalent ions on the chemical shift properties of the Leu(10) carbonyl oxygen of transmembrane pore-forming peptide gramicidin A (gA). We further compare the (17)O shifts induced by binding metal ions to the binding of protons in the pH range from 1 to 12 and find a significant difference. This unexpected result points to a difference in mechanisms for ion and proton conduction by the gA pore. We believe that a large number of solid-state NMR-based studies, including structure-function, drug screening, proton exchange, pH, and other titration experiments, will benefit significantly from the method described here.     

Phenylarsine oxide and the mechanism of insulin-stimulated sugar transport

The actions of phenylarsine oxide (PAO) on hormone receptors and transport processes are reviewed with particular reference to the mechanism of insulin-stimulated sugar transport. It is suggested that as well as reaction with vicinal -SH groups, vicinal -SH/-OH and -SH/-CO2H groups should also be considered as potential reaction sites for PAO. The relatively high levels of these vicinal combinations of groups in many hormone receptors makes them particularly susceptible to reaction with PAO. In the case of insulin-stimulated sugar transport PAO does not inhibit insulin binding to its receptor at low concentrations but may react directly with the glucose transporters in some cells. A hypothesis is proposed suggesting that PAO may react specifically with one transporter isoform (GLUT-4) which is found almost exclusively in rat adipocytes, skeletal muscle and heart tissue (i.e. insulin responsive tissue) whereas in insulin unresponsive cells such as erythrocytes the GLUT-1 isoform is the predominant transporter which is not inhibited by PAO.     

Pseudomonas aeruginosa PAO1 as a model for rhamnolipid production in bioreactor systems

Rhamnolipids are biosurfactants with interesting physico-chemical properties. However, the main obstacles towards an economic production are low productivity, high raw-material costs, relatively expensive downstream processing, and a lack of understanding the rhamnolipid production regulation in bioreactor systems. This study shows that the sequenced Pseudomonas aeruginosa strain PAO1 is able to produce high quantities of rhamnolipid during 30 L batch bioreactor cultivations with sunflower oil as sole carbon source and nitrogen limiting conditions. Thus PAO1 could be an appropriate model for rhamnolipid production in pilot plant bioreactor systems. In contrast to well-established production strains, PAO1 allows knowledge-based systems biotechnological process development combined with the frequently used heuristic bioengineering approach. The maximum rhamnolipid concentration obtained was 39 g/L after 90 h of cultivation. The volumetric productivity of 0.43 g/Lh was comparable with previous described production strains. The specific rhamnolipid productivity showed a maximum between 40 and 70 h of process time of 0.088 g_RL/g_BDMh. At the same time interval, a shift of the molar di- to mono-rhamnolipid ratio from 1:1 to about 2:1 was observed. PAO1 not only seems to be an appropriate model, but surprisingly has the potential as a strain of choice for actual biotechnological rhamnolipid production.     

Mechanisms of pressure-induced water infiltration process through graphene nanopores

Understanding the mechanism of water infiltration through nanopores is essential for wide applications ranging from membrane separation to gene therapy. In this paper, the molecular dynamics simulation method is used to investigate the pressure-assisted water transport process through graphene nanopores. Various factors including the hydrophobicity of nanopore surface, nanopore dimension, temperature as well as external electric field that affect water in permeation into graphene nanopores are discussed. It is found that classic Laplace-Young equation fails and the relationship between pressure and diameter (D) does not follow the 1/D dependence as the characteristic dimension of a nanopore is sufficiently small (smaller than 1?nm). The critical pressure significantly depends on both the pore length and electric field as D is smaller than 5?nm. Besides, enhancing temperature and electric field intensity are obviously beneficial for water infiltration through those nanopores with a diameter smaller than 5?nm.     

Developing synthetic conical nanopores for biosensing applications

In this review we bring together recent results from our group focused towards the development of biosensors from single conically-shaped artificial nanopores. The nanopores, used in the work presented here, were prepared using the track-etch process. The fabrication of track-etched conical nanopores has been optimized to allow for single nanopores with reproducible dimensions to be prepared. We have also demonstrated techniques that allow for easy and controllable manipulation of nanopore geometry (e.g., cone angle). We will consider the ion transport properties of the conical nanopores and factors that affect these properties. Methods for introducing functions that mimic biological ion channels, such as voltage-gating, into these nanopores will also be addressed. Three prototype sensors developed from single conical nanopores will be presented. In the first two sensors, the single conical nanopores function as resistive-pulse sensors and detect the presence of analytes as current-blockade events in the ion current. The third sensor functions in an on/off mode, much like a ligand-gated ion channel. In the presence of a target analyte, the ion current permanently shuts off.     

Synthetic nanopores as a test case for ion channel theories: the anomalous mole fraction effect without single filing

The predictions of a theory for the anomalous mole fraction effect (AMFE) are tested experimentally with synthetic nanopores in plastic. The negatively charged synthetic nanopores under consideration are highly cation selective and 50 Å in diameter at their smallest point. These pores exhibit an AMFE in mixtures of Ca²⁺ and monovalent cations. An AMFE occurs when the conductance through a pore is lower in a mixture of salts than in the pure salts at the same concentration. For ion channels, the textbook interpretation of the AMFE is that multiple ions move through the pore in coordinated, single-file motion. However, because the synthetic nanopores are so wide, their AMFE shows that single filing is not necessary for the AMFE. It is shown that the AMFE in the synthetic nanopores is explained by a theory of preferential ion selectivity. The unique properties of the synthetic nanopores allow us to experimentally confirm several predictions of this theory. These same properties make synthetic nanopores an interesting new platform to test theories of ion channel permeation and selectivity in general.     

Comparative studies of the amino acid and nucleotide sequences of pilin derived from Pseudomonas aeruginosa PAK and PAO.

The entire amino acid sequence for Pseudomonas aeruginosa PAO pilin was determined through peptide sequencing and from the complete nucleotide sequence encoding the pilin gene. The precursor PAO pilin is 149 amino acids in length which includes a 6-amino-acid positively charged leader sequence. Comparison of the amino acid sequences of pilin produced by P. aeruginosa PAO and PAK reveals a region of high homology corresponding to the leader peptide and residues 1 to 54 of the mature pilin. The amino acid sequence of the peptide encompassing the major antigenic determinant of PAK differs greatly from that of the equivalent region in PAO. The C-terminal regions of these proteins are semiconserved. Few major differences were found when the predicted secondary structures for PAO and PAK pilins were compared. Major nucleotide sequence variation between the equivalent restriction fragments from PAO and PAK occurred within the areas coding for the peptides containing the immunodominant site for PAK pilin and the C termini.     

Mechanisms of Cation Exchange by Pseudomonas aeruginosa PAO1 and PAO1 wbpL, a Strain with a Truncated Lipopolysaccharide

The ability of bacterial cells to sequester cations is well recognized, despite the fact that the specific binding sites and mechanistic details of the process are not well understood. To address these questions, the cation-exchange behavior of Pseudomonas aeruginosa PAO1 cells with a truncated lipopolysaccharide (LPS) (PAO1 wbpL) and cells further modified by growth in a magnesium-deficient medium (PAO1 wbpL − Mg²⁺) were compared with that of wild-type P. aeruginosa PAO1 cells. P. aeruginosa PAO1 cells had a negative surface charge (zeta potential) between pH 11 and 2.2, due to carboxylate groups present in the B-band LPS. The net charge on PAO1 wbpL cells was increasingly positive below pH 3.5, due to the influence of NH₃⁺ groups in the core LPS. The zeta potentials of these cells were also measured in Na⁺, Ca²⁺, and La³⁺ electrolytes. Cells in the La³⁺ electrolyte had a positive zeta potential at all pH values tested. Growing P. aeruginosa PAO1 wbpL in magnesium-deficient medium (PAO1 wbpL − Mg²⁺) resulted in an increase in its zeta potential in the pH range from 3.0 to 6.5. In cation-exchange experiments carried out at neutral pH with either P. aeruginosa PAO1 or PAO1 wbpL, the concentration of bound Ca²⁺ was found to decrease as the pH was reduced from 7.0 to 3.5. At pH 3.5, the bound Mg²⁺ concentration decreased sharply, revealing the activity of surface sites for cation exchange and their pH dependence. Infrared spectroscopy of attached biofilms suggested that carboxylate and phosphomonoester functional groups within the core LPS are involved in cation exchange.     

Comparative Molecular docking analysis of DNA Gyrase subunit A in Pseudomonas aeruginosaPAO1

Pseudomonas aeruginosa is an opportunistic bacterium known for causing chronic infections in cystic fibrosis and chronic obstructive pulmonary disease (COPD) patients. Recently, several drug targets in Pseudomonas aeruginosa PAO1 have been reported using network biology approaches on the basis of essentiality and topology and further ranked on network measures viz. degree and centrality. Till date no drug/ligand molecule has been reported against this targets.In our work we have identified the ligand /drug molecules, through Orthologous gene mapping against Bacillus subtilis subsp. subtilis str. 168 and performed modelling and docking analysis. From the predicted drug targets in PA PAO1, we selected those drug targets which show statistically significant orthology with a model organism and whose orthologs are present in all the selected drug targets of PA PAO1.Modeling of their structure has been done using I-Tasser web server. Orthologous gene mapping has been performed using Cluster of Orthologs (COGs) and based on orthology; drugs available for Bacillus sp. have been docked with PA PAO1 protein drug targets using MoleGro virtual docker version 4.0.2.Orthologous gene for PA3168 gyrA is BS gyrAfound in Bacillus subtilis subsp. subtilis str. 168. The drugs cited for Bacillus sp. have been docked with PA genes and energy analyses have been made. Based on Orthologous gene mapping andin-silico studies, Nalidixic acid is reported as an effective drug against PA3168 gyrA for the treatment of CF and COPD.     

Single polypeptide detection using a translocon EXP2 nanopore

DNA sequencing using nanopores has already been achieved and commercialized; the next step in advancing nanopore technology is towards protein sequencing. Although trials have been reported for discriminating the 20 amino acids using biological nanopores and short peptide carriers, it remains challenging. The size compatibility between nanopores and peptides is one of the issues to be addressed. Therefore, exploring biological nanopores that are suitable for peptide sensing is key in achieving amino acid sequence determination. Here, we focus on EXP2, the transmembrane protein of a translocon from malaria parasites, and describe its pore-forming properties in the lipid bilayer. EXP2 mainly formed a nanopore with a diameter of 2.5 nm assembled from 7 monomers. Using the EXP2 nanopore allowed us to detect poly-L-lysine (PLL) at a single-molecule level. Furthermore, the EXP2 nanopore has sufficient resolution to distinguish the difference in molecular weight between two individual PLL, long PLL (Mw: 30,000–70,000) and short PLL (Mw: 10,000). Our results contribute to the accumulation of information for peptide-detectable nanopores.     

Determination of protein orientation on surfaces with X-ray photoelectron spectroscopy

The use of X-ray photoelectron spectroscopy (XPS) for determination of the preferred orientation of proteins on metal surfaces is demonstrated. A myoglobin derivative in which a pentaamineruthenium (III) group is attached to a specific histidine (residue 81) is used for this purpose, with the Ru and Fe acting as a double marker. The relative intensities of the XPS photoelectron spectra for these two markers are shown to be a sensitive measure of orientation of the protein film. On both aluminum and indium-tin-oxide surfaces, XPS indicates that the Ru-Fe axis of the myoglobin derivative is preferentially oriented with the Ru furthest from the substrate.     

TOL plasmid in Pseudomonas aeruginosa PAO: thermosensitivity of self-maintenance and inhibition of host cell growth.

The TOL plasmid originally isolated in Pseudomonas putida (arvilla) mt-2 was transmissible to strains of the fluorescens group of Pseudomonas, i.e., P. putida, P. fluorescens, and P. aeruginosa, except for a strain of P. aeruginosa, strain PAO. The same strain, however, could accept the plasmid when its restriction and modification abilities were lost by mutations or by growing at high temperature. In addition, the transmissibility of the TOL plasmid from strain PAO to P. putida was low when the plasmid was modified by the donor. By using P. aeruginosa PAO carrying the TOL plasmid, the stability and genetic expression of the plasmid as well as its effect on the host cell growth were examined. Thus the self-maintenance of the plasmid was found to be thermosensitive. Furthermore, the TOL plasmid inhibited the growth of strain PAO at high temperature, accompanied by the formation of some filamentous cells. These thermosensitive properties of the TOL plasmid were host dependent and not exhibited in another strain of P. aeruginosa.     

An innovative spectroelectrochemical reflection cell for rapid protein electrochemistry and ultraviolet/visible/infrared spectroscopy

A novel electrochemical reflection cell combining electrochemical techniques and spectroscopy which uses a solid gold working electrode as an optical mirror is described. This cell can be used at path lengths as low as a few micrometers and thus is suitable for ultraviolet/visible (UV/Vis) and infrared spectroscopy even for aqueous solutions and suspensions. The cell was designed for small sample volumes of only a few microliters, thus reducing the effort for sample preparation. Due to the short path length of some micrometers, the entire volume is within the Nernst diffusion layer, hence resulting in fast equilibration. Evaluation of the technique is described with direct electrochemistry of horse heart cytochrome c at the gold electrode modified with 4,4'-dithiodipyridine. Cyclic voltammograms indicate rapid and reversible electrochemistry with the correct midpoint potential (52 mV vs Ag/AgCl/3 M KCl). Chronoamperometry and coulometry confirm rapid and complete oxidation and reduction; the cell volume can be entirely fully reduced within less than 10-20 s. Spectroscopy in the UV/Vis region, with potentials at the working electrode stepped between -390 and 390 mV, show perfect titration of the cytochrome c heme bands. A Nernst fit of the alpha band absorption, with redox potential Em and number of electrons n left as parameters, yields a midpoint potential of 49 mV and n=0.9. The potential of this cell in the investigation of biological electron transfer reactions and in the study of bioenergetic systems is discussed.     

Polyamine oxidase-mediated trypanosome killing: the role of hydrogen peroxide and aldehydes

Trypanosoma lewisi and T. musculi were lysed when incubated with bovine serum in the presence of either spermine or spermidine. Similar results were obtained when a fraction from bovine serum containing polyamine oxidase (PAO) activity or a commercially available purified beef plasma PAO were used in lieu of bovine serum. Trypanosomes treated with cytotoxic concentrations of PAO-spermine failed to establish infection in rats. These results are similar to those from our previous studies with African trypanosomes. We now extend the properties of PAO by showing that human retroplacental serum (RPS) containing PAO activity was also capable of mediating trypanosome killing. This is of significance because the macrophage PAO resembles the human RPS PAO. In addition, our preliminary studies, in which an attempt was made to characterize the factors responsible for cytotoxicity, suggested that a number of products of the PAO-polyamine reaction display trypanocidal properties. These included hydrogen peroxide (H2O2), the aldehyde acrolein, and possibly aminoaldehydes. No evidence was obtained that the oxygen intermediates, superoxide and hydroxyl radicals, play a role in the PAO-mediated trypanosome killing. Ammonia, an additional product of PAO-polyamine reaction, was not trypanocidal. Furthermore, the data suggested that less than 30 min exposure to the reaction mixture (and possibly to aminoaldehydes) was adequate to cause irreversible damage to trypanosomes.