Quantitative in vitro assay to evaluate the capability of yeast cell wall fractions from Trichosporon mycotoxinivorans to selectively bind gram negative pathogens

Yeast cell wall fractions have been proposed to bind enteropathogenic bacteria. The aim of this study was to develop a quantitative assay by measuring the optical density as growth parameter of adhering bacteria. The exponential growth phase of adhering bacteria was determined by optical density reading and compared with the colony count (CFU/mL). A linear regression was compiled and the bacterial number bound to the yeast cell wall product could be determined. Further focus was the investigation of a yeast cell wall from strain Trichosporon mycotoxinivorans (MTV) for its ability to bind gram negative Salmonella, E. coli and Campylobacter strains and gram positive probiotic bacteria of the genera lactobacilli and bifidobacteria as well as gram positive Clostridium perfringens quantitatively. The gram negative probiotic strain E. coli Nissle 1917 was also investigated. Seven out of 10 S. Typhimurium and S. Enteritidis strains adhered to the cell wall product with an amount between 10³ and 10⁴ CFU/10 μg. Four out of 7 E. coli strains showed an average binding capability (10² CFU/10 µg) whereas 4 × 10³E. coli F4 cells bound per 10 μg yeast cell wall. E. coli 0149 K91, E. coli 0147 K89, C. jejuni and C. perfringens as well the genera lactobacilli and bifidobacteria did not bind to the yeast cell wall. E. coli Nissle 1917 was bound with 2 × 10² CFU/10 μg. These results demonstrate that cell wall from MTV can be used to differentially bind E. coli spp. and Salmonella spp. up to 8 × 10⁴ CFU/10 μg. Thus certain yeast cell walls may prevent enteric infections caused by selective bacteria. This methodical approach would be an accurate tool in the feed industry for quality control of yeast cell wall products.     

Electroporation of Bradyrhizobium japonicum

Summary Electroporation offers a fast, efficient and reproducible way to introduce DNA into bacteria. We have successfully used this technique to transform two commercially important strains of Bradyrhizobium japonicum, the nitrogen-fixing soybean symbiont. Initially, electroporation conditions were optimized using plasmid DNA which had been prepared from the same B. japonicum strain into which the{imDNA was to b}e transformed. Efficiencies of 10⁵-10⁶ transformants/g DNA were obtained for strains USDA 110 and 61A152 with ready-to-use frozen cells. Successful electroporation of B. japonicum with plasmid DNA prepared from Escherichia coli varied with the E. coli strain from which the plasmid was purified. The highest transformation efficiencies (10⁴ transformants/g DNA) were obtained using DNA prepared from a dcm ^– dam ^– strain of E. coli. This suggests that routine isolation of DNA from an E. coli strain incapable of DNA modification should help in increasing transformation efficiencies for other strains of bacteria where DNA restriction appears to be a significant obstacle to successful transformation. We have also monitored the rate of spontaneous mutation in electroporated cells and saw no significant difference in the frequency of streptomycin resistance for electroporated cells compared to control cells.     

High frequency transformation of the industrial erythromycin-producing bacterium Saccharopolyspora erythraea

The DNA transformation in the industrial erythromycin-producing Saccharopolyspora erythraea was investigated as standard protoplast transformation methods are ineffective. Intergeneric conjugal transfer of DNA from E. coli demonstrated transformation efficiencies from 0.05 × 10⁻⁸ to 7.2 × 10⁻⁸ exconjugants generated per recipient. Electroporation-mediated methodologies were also established. More than 10⁵ transformants were acquired per μg DNA. The proposed protocol provides an alternative route for the introduction of DNA into industrial strains.     

Development of an electro-transformation system for Escherichia coli DH10B

Summary Escherichia coli can be transformed to high efficiencies by subjecting a mixture of cells and DNA to a brief but intense electrical field. Factors that affect the transformation efficiency of E.coli strain DH10B were analysed. Optimal conditions gave an efficiency of 10⁸ to 10⁹ transformants/g DNA with E.coli strains K803 and DH10B, and plasmids pB1221.23 and pBSK+. The use of ligated DNA resulted in 10⁶ transformants/g DNA. Detailed protocols for these systems are given.     

Construction ofEscherichia coli-Clostridium acetobutylicum shuttle vectors and transformation ofClostridium acetobutylicum strains

Summary SeveralE. coli-C. acetobutylicum shuttle vectors were constructed and used to transform twoC. acetobutylicum strains ATCC 824 and NCIMB 8052. Other than pSYL2, none of these vectors were able to transform ATCC 824 due to the presence of a restriction system. However, all of them could transform NCIMB 8052 with efficiencies of 8×10²–6×10³ transformants per g DNA.     

Investigation of enhancement of two processes, sedimentation and conjugation, when bacteria are concentrated in ultrasonic standing waves

Cells aggregate and can be recovered from suspension when exposed to an ultrasonic standing wave field. The acoustic force on individual cells in a standing wave decreases with particle volume. A plane ultrasonic field generated by a transducer driven at 3.3 MHz was used here to investigate the removal of Escherischia coli, cells with dimensions of the order of 1.0 m, from batch suspension by sedimentation over a range of concentrations (10³ to 10¹⁰ cells ml^–1). Cell removal efficiencies greater than 90% were achieved at initial concentrations of 10¹⁰ cells ml^–1. Removal efficiencies decreased gradually to zero, as initial bacterial concentration was reduced to 10⁷ cells ml^–1. It was found that, when low concentrations of E. coli (10³ to 10⁵ cells ml^–1) were added to suspensions of larger particles (i.e. yeast cells) that were of sufficient concentration to form aggregates in the sound field, E. coli could be harvested to an efficiency of 40%. The results imply that the E. coli became trapped and sediment with aggregates of larger particles. Some strains of bacteria are capable of DNA transfer by conjugation. The transfer rate of E. coli RP4 plasmid is order of magnitudes greater when conjugation occurs on solid medium rather than in liquid suspension. We have investigated whether the conjugation rate would also be higher in ultrasonically induced E. coli clumps than in free suspension. The donor strain was mixed with a recipient strain of E. coli, then sonicated in a capillary at 4.6 MHz in a tubular transducer for 5 min. The bacteria aggregated successfully. Results showed a three-fold increase in the rate of conjugation compared to a liquid mating control.     

Study of the Action of Se and Cu on the Growth Metabolism of <Emphasis Type="Italic">Escherichia coli</Emphasis> by Microcalorimetry

The biological effect of Se and Cu²⁺ on Escherichia coli (E. coli) growth was studied by using a 3114/3236 TAM Air Isothermal Calorimeter, ampoule method, at 37°C. From the thermogenesis curves, the thermokinetic equations were established under different conditions. The kinetics showed that a low concentration of Se (1–10 μg/mL) promoted the growth of E. coli, and a high concentration of Se (>10 μg/mL) inhibited the growth, but the Cu²⁺ was always inhibiting the growth of E. coli. Moreover, there was an antagonistic or positive synergistic effect of Se and Cu²⁺ on E. coli in the different culture medium when Se was 1–10 μg/ml and Cu²⁺ was 1–20 μg/ml. There was a negative synergistic effect of Se and Cu²⁺ on E. coli when Se was higher than 10 μg/ml and Cu²⁺ was higher than 20 μg/ml. The antagonistic or synergistic effect between Se and Cu²⁺ on E. coli was related to the formation of Cu–Se complexes under the different experimental conditions chosen.     

The influence of the growth phase of enteric bacteria on electrotransformation with plasmid DNA

Salmonella typhimurium LB5000 andEscherichia coli JM109 were transformed by electroporation. In accordance with the chemical transformation methods, the growth phase of these electrocompetent bacteria had a strong impact on transformation efficiency. Survival of bacteria, after the high-voltage electrical pulse was also influenced by the growth phase. Both bacterial species were most successfully electrotransformed when microbial cells were harvested at the late lag phase. The second optimum for transformation reachedE. coli cells in the mid-exponential andS. typhimurium cells in the late exponential phase. Transformation efficiencies ranged from 3.4×10⁴ to 2.7×10⁵ transformants per μg DNA in the case ofS. typhimurium and from 2.8 × 10² to 8.8×10⁵ transformants per μg DNA in the case ofE. coli. Survival of cells after the electrical pulse in late lag and late exponential phases was about 20% higher than during other phases of growth. Preparing electrocompetent cells from later phases of their growth is more useful for practice, because it provides more biomass with good yield of transformants.     

Ability of Shiga Toxin-Producing Escherichia coli and Salmonella spp. To Survive in a Desiccation Model System and in Dry Foods

In order to determine desiccation tolerances of bacterial strains, the survival of 58 diarrheagenic strains (18 salmonellae, 35 Shiga toxin-producing Escherichia coli [STEC], and 5 shigellae) and of 15 nonpathogenic E. coli strains was determined after drying at 35°C for 24 h in paper disks. At an inoculum level of 10⁷ CFU/disk, most of the salmonellae (14/18) and the STEC strains (31/35) survived with a population of 10³ to 10⁴ CFU/disk, whereas all of the shigellae (5/5) and the majority of the nonpathogenic E. coli strains (9/15) did not survive (the population was decreased to less than the detection limit of 10² CFU/disk). After 22 to 24 months of subsequent storage at 4°C, all of the selected salmonellae (4/4) and most of the selected STEC strains (12/15) survived, keeping the original populations (10³ to 10⁴ CFU/disk). In contrast to the case for storage at 4°C, all of 15 selected strains (5 strains each of Salmonella spp., STEC O157, and STEC O26) died after 35 to 70 days of storage at 25°C and 35°C. The survival rates of all of these 15 strains in paper disks after the 24 h of drying were substantially increased (10 to 79 times) by the presence of sucrose (12% to 36%). All of these 15 desiccated strains in paper disks survived after exposure to 70°C for 5 h. The populations of these 15 strains inoculated in dried foods containing sucrose and/or fat (e.g., chocolate) were 100 times higher than those in the dried paper disks after drying for 24 h at 25°C.     

Fermentation of sugar mixtures using Escherichia coli catabolite repression mutants engineered for production of L-lactic acid

Conversion of lignocellulose to lactic acid requires strains capable of fermenting sugar mixtures of glucose and xylose. Recombinant Escherichia coli strains were engineered to selectively produce L-lactic acid and then used to ferment sugar mixtures. Three of these strains were catabolite repression mutants (ptsG ⁻) that have the ability to simultaneously ferment glucose and xylose. The best results were obtained for ptsG ⁻ strain FBR19. FBR19 cultures had a yield of 0.77 (g lactic acid/g added sugar) when used to ferment a 100 g/l total equal mixture of glucose and xylose. The strain also consumed 75% of the xylose. In comparison, the ptsG ⁺ strains had yields of 0.47–0.48 g/g and consumed 18–22% of the xylose. FBR19 was subsequently used to ferment a variety of glucose (0–40 g/l) and xylose (40 g/l) mixtures. The lactic acid yields ranged from 0.74 to 1.00 g/g. Further experiments were conducted to discover the mechanism leading to the poor yields for ptsG ⁺ strains. Xylose isomerase (XI) activity, a marker for induction of xylose metabolism, was monitored for FBR19 and a ptsG ⁺ control during fermentations of a sugar mixture. Crude protein extracts prepared from FBR19 had 10–12 times the specific XI activity of comparable samples from ptsG ⁺ strains. Therefore, higher expression of xylose metabolic genes in the ptsG ⁻ strain may be responsible for superior conversion of xylose to product compared to the ptsG ⁺ fermentations. Received 14 December 2000/ Accepted in revised form 28 June 2002     

Natural Transformation-Mediated Transfer of Erythromycin Resistance in Campylobacter coli Strains from Turkeys and Swine

Erythromycin resistance in Campylobacter coli from meat animals is frequently encountered and could represent a substantial barrier to antibiotic treatment of human infections. Erythromycin resistance in this organism has been associated with a point mutation (A2075G) in the 23S rRNA gene. However, the mechanisms responsible for possible dissemination of erythromycin resistance in C. coli remain poorly understood. In this study, we investigated transformation-mediated acquisition of erythromycin resistance by genotypically diverse C. coli strains from turkeys and swine, with total genomic DNA from erythromycin-resistant C. coli of either turkey or swine origin used as a donor. Overall, transformation to erythromycin resistance was significantly more frequent in C. coli strains from turkeys than in swine-derived strains (P < 0.01). The frequency of transformation to erythromycin resistance was 10⁻⁵ to 10⁻⁶ for turkey-derived strains but 10⁻⁷ or less for C. coli from swine. Transformants harbored the point mutation A2075G in the 23S rRNA gene, as did the erythromycin-resistant strains used as DNA donors. Erythromycin resistance was stable in transformants following serial transfers in the absence of the antibiotic, and most transformants had high MICs (>256 μg/ml), as did the C. coli donor strains. In contrast to the results obtained with transformation, spontaneous mutants had relatively low erythromycin MICs (32 to 64 μg/ml) and lacked the A2075G mutation in the 23S rRNA gene. These findings suggest that natural transformation has the potential to contribute to the dissemination of high-level resistance to erythromycin among C. coli strains colonizing meat animals.     

Electroporation and stable maintenance of plasmid DNAs in a biocontrol strain of Pseudomonas syringae

Transformation efficiencies as high as 10⁷ transformants g^–1 DNA have been previously reported for pseudomonads using electroporation protocols established for E. coli with plasmid DNAs prepared from methylation proficient E. coli hosts. We report here a protocol for electroporation of plasmid DNAs into a biocontrol strain of Pseudomonas syringae which could not be electroporated by standard E. coli methods. Transformation efficiencies of 10⁷ or higher were obtained with DNA recovered from initial P. syringae transformation or with DNA prepared from methylation deficient E. coli. Both plasmids used in this study were stably maintained in the absence of selection for at least 50 generations.     

Microbial load,incidence and antibiotic resistance of some disease-causing microorganisms on raw food items in consumed Ethiopia

Summary A total of 708 strains belonging to different bacterial genera were isolated from fresh tomatoes, eggs, green peppers and fish sold in open markets in Awassa, Ethiopia. They mainly consisted of coliforms (54%),Staphylococcus aureus (26%) andProteus (16%).Shigella was isolated from 26% of the tomato specimens. Total counts for the various food items varied between 2.4 × 10⁶ c.f.u./g and 9.5 × 10⁶ c.f.u./g. Most probable number of total coliform and faecal coliform ranged from 1.5 × 10²/g to 3 × 10²/g and 37/g to 70/g. Less than 50% of the isolated 522 Gram-negative rods were susceptible to ampicillin and cephalothin and only 14 isolates were susceptible to all drugs tested.Proteus showed higher rates of resistance to ampicillin, carbenicillin and cephalothin (75%). Resistance to these drugs was also relatively higher inEscherichia coli (50%). Sixty-eight of the 186S. aureus isolates were sensitive to all the drugs tested and susceptibility to tetracycline and chloramphenicol was relatively lower (70%).

---

Charge microbienne, incidence et résistance aux antibiotiques de quelques micro-organismes dans des aliments destinés à être consommés crus en Ethiopie

Résumé On a isolé un total de 708 souches appartenant à divers genres bactériens de tomates fraîches, d'oeufs, de poivrons verts et de poissons vendus sur les marchés ouverts en Awassa, Ethiopie. Parmi celles-ci, on a trouvé 26% deStaphylococcus aureus et 16% deProteus. On a isolé desShigella dans 26% des tomates testées. L'énumération totale des germes dans divers aliments a donné des valeurs situées entre 2.4 × 10⁶ c.f.u./g et 9.5 × 10⁶ c.f.u./g. Le nombre le plus probable de coliformes totaux et de coliformes fécaux variait entre 1.5 × 10²/g et 3 × 10²/g et entre 37/g et 70/g. Moins de 50% des 522 souches isolées à forme de bâtonnets étaient sensibles à l'ampicilline et à la céphalothine et seules 14 souches isolées étaient sensibles à toutes les drogues testées. LesProteus ont montré davantage de résistance à l'ampicilline, la carbénicilline et la céphalothine (75%). La résistance à ces drogues était aussi relativement plus élevée chezEscherichia coli. Soixante huit de 186 souches isolées deS. aureus étaient sensibles à toutes les drogues testées et leur sensibilité à la tétracycline et au chloramphenicol était relativement plus faible (70%).

     

Mineralization of 2,4-dichlorophenoxyacetic acid (2,4-D) in soil inoculated with Pseudomonas cepacia DBO1(pRO101), Alcaligenes eutrophus AEO106(pRO101) and Alcaligenes eutrophus JMP134(pJP4): effects of inoculation level and substrate concentration

Mineralization of 2,4-dichlorophenoxyacetic acid (2,4-D) by two Alcaligenes eutrophus strains and one Pseudomonas cepacia strain containing the 2,4-D degrading plasmids pJP4 or pRO101 (=pJP4::Tn1721) was tested in 50 g (wet wt) samples of non-sterile soil. Mineralization was measured as ¹⁴C-CO₂evolved during degradation of uniformly-ring-labelled ¹⁴C-2,4-D. When the strains were inoculated to a level of approximately 10⁸ CFU/g soil, between 20 and 45% of the added 2,4-D (0.05 ppm, 10 ppm or 500 ppm) was mineralized within 72 h. Mineralization of 0.05 ppm and 10 ppm, 2,4-D by the two A. eutrophus strains was identical and rapid whereas mineralization by P. cepacia DBO1(pRO101) occurred more slowly. In contrast, mineralization of 500 ppm 2,4-D by the two A. eutrophus strains was very slow whereas mineralization by P. cepacia DBO1 was more rapid. Comparison of 2,4-D mineralization at different levels of inoculation with P. cepacia DBO1(pRO101) (6×10⁴, 6×10⁶ and 1×10⁸ CFU/g soil) revealed that the maximum mineralization rate was reached earlier with the high inoculation levels than with the low level. The kinetics of mineralization were evaluated by nonlinear regression analysis using five different models. The linear or the logarithmic form of a three-half-order model were found to be the most appropriate models for describing 2,4-D mineralization in soil. In the cases in which the logarithmic form of the three-half-order model was the most appropriate model we found, in accordance with the assumptions of the model, a significant growth of the inoculated strains.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - CFU colony forming units - PTYG peptone, tryptone, yeast & glucose - DPM disintegrations per minute     

Uptake of bacteriophage λ DNA in Escherichia coli by electroporation: An alternative to in vitro packaging

Summary By using a high field strength DC pulse of 15 kV/cm and a pulse duration of 5 ms for the transfection of E. coli by bacteriophage DNA, we obtained efficiencies of 1.1 × 10⁶ (pfu/g bacteriophage , DNA). This represents a 100-fold improvement over the traditional CaCl₂/heat shock method and is a viable alternative to the more costly in vitro packaging of recombinant bacteriophage DNA for the production of cDNA and genomic libraries.     

Bioaugmentation of UASB reactors with immobilized <Emphasis Type="Italic">Sulfurospirillum barnesii</Emphasis> for simultaneous selenate and nitrate removal

Whole-cell immobilization of selenate-respiring Sulfurospirillum barnesii in polyacrylamide gels was investigated to allow the treatment of selenate contaminated (790 μg Se × L⁻¹) synthetic wastewater with a high molar excess of nitrate (1,500 times) and sulfate (200 times). Gel-immobilized S. barnesii cells were used to inoculate a mesophilic (30°C) bioreactor fed with lactate as electron donor at an organic loading rate of 5 g chemical oxygen demand (COD) × L⁻¹ day⁻¹. Selenate was reduced efficiently (>97%) in the nitrate and sulfate fed bioreactor, and a minimal effluent concentration of 39 μg Se × L⁻¹ was obtained. Scanning electron microscopy with energy dispersive X-ray (SEM–EDX) analysis revealed spherical bioprecipitates of ≤2 μm diameter mostly on the gel surface, consisting of selenium with a minor contribution of sulfur. To validate the bioaugmentation success under microbial competition, gel cubes with immobilized S. barnesii cells were added to an Upflow Anaerobic Sludge Bed (UASB) reactor, resulting in earlier selenate (24 hydraulic retention times (HRTs)) and sulfate (44 HRTs) removal and higher nitrate/nitrite removal efficiencies compared to a non-bioaugmented control reactor. S. barnesii was efficiently immobilized inside the UASB bioreactors as the selenate-reducing activity was maintained during long-term operation (58 days), and molecular analysis showed that S. barnesii was present in both the sludge bed and the effluent. This demonstrates that gel immobilization of specialized bacterial strains can supersede wash-out and out-competition of newly introduced strains in continuous bioaugmented systems. Eventually, proliferation of a selenium-respiring specialist occurred in the non-bioaugmented control reactor, resulting in simultaneous nitrate and selenate removal during a later phase of operation. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Electroporation and conjugal plasmid transfer to members of the genus Aquaspirillum

Electroporation methods and conjugal matings were used to transfer several plasmid vectors to Aquaspirillum dispar and Aquaspirillum itersonii. The incompatibility P class plasmid RP4 was conjugally transferred from Escherichia coli HB101 to these spirilla, and the transconjugants subsequently donated the molecule to plasmid-free E. coli and A. dispar strains via conjugal matings. High-voltage electrotransformation was used to transfer plasmids pUCD2, pSa151 and RP4 to A. dispar and A. itersonii, at efficiencies as high as 3×10⁴ transformants per μg plasmid DNA. RP4 DNA isolated from spirillum hosts, but not RP4 from E. coli cells was successfully transferred to A. dispar and A. itersonii by electrotransformation, suggesting that modification and/or restriction activity may be present in these Aquaspirillum species.     

Production of phenylalanine and organic acids by phosphoenolpyruvate carboxylase-deficient mutants ofEscherichia coli

Summary Isogenic strains ofEscherichia coli were grown aerobically in minimal medium in a 2-liter airlift fermentor to determine whether appc (phosphoenolpyruvate carboxylase) mutation had the effect of directing glucose carbon into phenylalanine synthesis. Two host strains, YMC9 (ppc ⁺) and KB285 (ppc ^–) were used, either with (Phe^c) or without (Phe⁰) a plasmid which determines constitutive phenylalanine production. Carbon consumption and metabolic products were monitored. Phenylalanine production occurred only in strains carrying the Phe^c plasmid.ppc ^– strains produced less cell mass and more acetate, pyruvate, and phenylalanine (in the Phe^c strains) than did isogenicppc ⁺ strains. Lactate and ethanol production were not detected in any of the strains. Phe^c strains produced less acetate and pyruvate than their Phe⁰ homologs. Importantly,ppc ^–/Phe^c produced at least six times as much phenylalanine (0.32 g phenylalanine/g dry weight cells) asppc ⁺/Phe^c. Even in this case, however, phenylalanine was produced at ten-fold lower levels than acetate. Thus, although theppc ^– mutation stimulates phenylalanine production, it also stimulates the production of unwanted by-products such as acetate and pyruvate.     

Enhancing electro-transformation competency of recalcitrant Bacillus amyloliquefaciens by combining cell-wall weakening and cell-membrane fluidity disturbing

Bacillus amyloliquefaciens has been a major workhorse for the production of a variety of commercially important enzymes and metabolites for the past decades. Some subspecies of this bacterium are recalcitrant to exogenous DNA, and transformation with plasmid DNA is usually less efficient, thereby limiting the genetic manipulation of the recalcitrant species. In this work, a methodology based on electro-transformation has been developed, in which the cells were grown in a semicomplex hypertonic medium, cell walls were weakened by adding glycine (Gly) and dl-threonine (dl-Thr), and the cell-membrane fluidity was elevated by supplementing Tween 80. After optimization of the cell-loosening recipe by response surface methodology (RSM), the transformation efficiency reached 1.13 ± 0.34 × 10⁷ cfu/μg syngeneic pUB110 DNA in a low conductivity electroporation buffer. Moreover, by temporary heat inactivation of the host restriction enzyme, a transformation efficiency of 8.94 ± 0.77 × 10⁵ cfu/μg DNA was achieved with xenogeneic shuttle plasmids, a 10³-fold increase compared to that reported previously. The optimized protocol was also applicable to other recalcitrant B. amyloliquefaciens strains used in this study. This work could shed light on the functional genomics and subsequent strain improvement of the recalcitrant Bacillus, which are difficult to be transformed using conventional methods.     

Enhanced electrotransformation of the ethanologen Zymomonas mobilis ZM4 with plasmids

The Zymomonas mobilis ZM4 strain with excellent ethanol‐producing capabilities was the first strain of Z. mobilis, which was sequenced. This strain is resistant to transformation, and no previous study has shown a detailed protocol for electrotransfer of ZM4 with foreign DNA. In this work, many electrical and biological parameters were selected and evaluated in order to optimize the electrotransformation of ZM4. First, improved transformation efficiencies of 11 896, 99, 96 and 5989 transformants/μg DNA were separately achieved with shuttle plasmid pZB21‐mini (3082 bp), pZB21 (5930 bp), pZA22 (6994 bp) and broad‐host‐range vector pBBR1MCS‐2 (5144 bp) all prepared from Escherichia coli JM110. The crucial factors affecting the transformation efficiency included the source of the plasmid (the best strain was ZM4), origin and size of the plasmids, growth phase of the cells (the most ideal phase was early log phase with OD₆₀₀ of 0.3–0.4), the electric field strength (generally 11.75 kV/cm–13.25 kV/cm) and the recovery time (3–24 h). Further, based upon the optimal transformation protocol mentioned above for replicative plasmids in ZM4, (i) the electrotransformation by recombinant plasmid pBBR1MCS‐2‐Pgap‐FLP (6880 bp) was an immediate success with the transformation efficiency 10² transformants/μg DNA; (ii) the site‐specific integration efficiencies (expressed in terms of “per μg of DNA”) of 3–6 integrating transformants was obtained using the integrating plasmid pBR328‐ldhR‐cml‐ldhL (7447 bp). This study will assist genetic and biotechnological research of ZM4 and other Z. mobilis strains by providing information about suitable vectors and a more universal and reliable procedure for introducing DNA into this strain.