Full-length cDNA cloning utilizing the polymerase chain reaction, a degenerate oligonucleotide sequence and a universal mRNA primer.

A full-length cDNA was selectively amplified by the polymerase chain reaction (PCR) utilizing a primer pair consisting of a "universal" 21-base synthetic deoxyoligonucleotide (oligo dT 17GGCC) and a specific degenerate deoxyoligonucleotide sequence (DOS) derived from the N-terminal amino acid sequence. This double-stranded amplified cDNA was uni-directionally cloned into M13mp19 utilizing two restriction sites that had been previously incorporated into the termini of the universal and specific DOS primers. Cloning of the specific cDNA via this PCR amplification with the universal/specific DOS primer pair approach was confirmed by screening with a second DOS contiguous with the DOS employed to prime second (sense)-strand cDNA synthesis. This technique allows for the selective full-length cDNA cloning of low-abundance mRNAs from a single-protein sequence determination.     

Codominant PCR-based markers for Pinus taeda developed from mapped cDNA clones

 We report a strategy for developing codominant PCR-based genetic markers by using sequenced cDNA clones from loblolly pine (Pinus taeda L.). These clones were previously used as probes for detecting restriction fragment length polymorphisms (RFLPs) to generate linkage maps. After assessing the complexity of banding patterns from Southern blots, we selected clones representing relatively simple gene families, and then determined nucleotide sequences for about 200 bp at each end of the cDNA inserts. Specific PCR primers were designed to amplify samples of genomic DNA derived from two loblolly pine mapping populations. Polymorphisms were detected after digesting the amplified DNA fragments with a battery of restriction endonucleases, and most polymorphisms were inherited in a Mendelian fashion. These newly identified genetic markers are codominant and relatively simple to use. By assaying DNA from individuals used to construct RFLP maps, we show that most of these markers map to the same position as the RFLP loci detected using their corresponding cDNAs as probes, implying that these markers have been converted from RFLP to PCR-based methods. These PCR-based markers will be useful for genome mapping and population genetics. Received: 10 February 1998 / Accepted: 25 February 1998     

Locus-specific vector/primer systems for rapid cloning of allelic variants

We have developed a rapid cDNA cloning procedure which uses a single-stranded (ss) vector/primer in which the primer sequence is locus-specific. Vector/primers were constructed by substituting a specific oligodeoxynucleotide primer sequence in place of the polylinker in M13mp19. The ss vector/primer is linearized and used to prime cDNA synthesis. Recircularized DNA is then used directly to transform competent bacterial hosts. As no intermediate column purifications or extractions are necessary, the entire procedure is performed in a single tube, contributing to the overall simplicity of the protocol. The primary use for this kind of vector/primer system will be for cloning and sequencing multiple allelic variants of polymorphic loci which contain a conserved 3' sequence. The two vector/primers we report here are specific for HLA-DQ beta genes and for human Ig variable regions associated with IgM antibodies.     

Cloning of the peacdc2 homologue by efficient immunological screening of PCR products

A homologue of the ubiquitous eukaryotic cell cycle regulatory gene,cdc2, has been cloned fromPisum sativum, the garden pea. A novel immunological strategy was devised and implemented for screening PCR products generated by degenerate oligonucleotide primers. We used PCR to construct a deletion derivative of anEscherichia coli expression plasmid carrying theSchizosaccharomyces pombe cdc2 gene. The deleted segment encoded the domain recognized by monoclonal antibody MAb-J4, a reagent which also detects a single protein in extracts of all plant species we have examined. PCR products, generated by appropriatecdc2 primers, were ligated into new restriction sites flanking the deletion, reconstituting the deleted epitope. This strategy, first validated on a cloned yeastcdc2 template as control, was applied to the highly efficient cloning of a cDNA segment comprising 60% of the peacdc2 homologue. DNA sequencing revealed strong amino acid sequence conservation among thecdc2 gene products from pea, yeast and animal cells. Genomic Southern analysis indicated that thecdc2 gene occurs as a single copy in pea. An additionalcdc2-like clone was recovered which displays amino acid sequence similarity with that of peacdc2. The reported cloning and screening strategy, though limited by the availability of appropriate immunological reagents, provides not only an efficient means of screening heterogeneous PCR products generated by degenerate probes and/or low stringency PCR, but also product verification by immunological criteria.     

Rapid synthesis and cloning of complementary DNA from any RNA molecule into plasmid and phage M13 vectors

We describe several modifications of the Gubler and Hoffman procedure [Gene 25 (1983) 263-269] for complementary DNA (cDNA) synthesis that expand the versatility of this method for the rapid synthesis and cloning of double-stranded (ds) cDNA. These modifications include: (1) The combination of first and second strand synthesis into a single two-step reaction, which reduces the time for synthesis of blunt-ended ds-cDNA to less than 4 h. (2) The use of random hexadeoxyribonucleotide primers (RP) for the synthesis of ds-cDNA, which allows the synthesis of cDNA from any RNA template. (3) The combined use of random primers and DNA ligase treatment of cDNA/RNA hybrids prior to second-strand synthesis, which promotes the production of nearly full length ds-cDNA molecules. (4) The use of gel filtration to size-fractionate ds-cDNA, which allows the selection of specific size classes of ds-cDNA for cloning. (5) The use of blunt-end ligation to insert the ds-cDNA into the vector, which reduces the total time required for the construction of cDNA libraries to less than 24 h.     

Rapid amplification of genomic DNA ends bynla III partial digestion and polynucleotide tailing

We report a simple and efficient method, which combines restriction endonuclease digestion and deoxynucleotide tailing, for cloning unknown genomic sequences adjacent to a known sequence. Total genomic DNA is partially digested with the frequent-cutting restriction enzymeNla III. A homo-oligomeric cytosine tail is added by terminal transferase. The tailed DNA fragments are used as the template for cloning flanking regions from all sequences of interest. A first round PCR amplification is performed with a gene-specific primer and the selective (modified polyguanine) anchor primer complementary to the cytosine tail and theNla III recognition site, with a universal amplification primer sequence at its 5′ end. This is followed by another PCR amplification with a nested gene-specific primer and the universal amplification primer. Finally, the amplified products are fractionated, cloned, and sequenced. Using this method, we cloned the upstream region of a salt-induced gene based upon a partial cDNA clone (RSC5-U) obtained from sunflower (Helianthus annuus L.).     

A primer-based approach to genome walking

A genome walking strategy based on annealing and ligation of single-stranded DNA primers to 3′ overhangs following restriction endonuclease digestion was developed. A set of primers contains 4 nucleotides at the 3′ end that are complementary to overhangs formed by restriction endonucleasesApaI;PstI;SacI andSphI. Following ligation, 5′ end overhangs are formed on the DNA, which serves as sites for the adaptor primers and nested primers for PCR amplification in combination with the gene-specific primers. This strategy was verified by the amplification of up to 4 kb of a potato leafroll virus full-length infectious clone. The procedure could be adopted to target any upstream and downstream regions flanking known sequences within the plant genome.     

Cloning genomic sequences using long-range PCR

Protocols are presented for preparing DNA from a genomic library in λ phage and for synthesizing genomic fragments using PCR with nested vector- and gene-specific primers and linker-primers. Library DNA, isolated fromE. coli liquid lysates by a simple protocol, is used as template in PCR following a commercial protocol. The method produces library DNA sufficient for several hundred PCRs, incorporates nested primers to reduce nonspecific product formation, and enables the synthesis of linker-containing DNA fragments containing selected restriction sites to simplify subsequent cloning. The isolation of 5′ upstream sequences of three different arabidopsis genes by this methodod is described.     

Functional cloning vectors for use in directional cDNA cloning using cohesive ends produced with T4 DNA polymerase.

This paper describes the construction of 'Prime' cloning vectors, which include phage lambda and plasmid vectors useful for functional cloning in oocytes, yeast, and mammalian cells, and their use in a 'Prime' cloning system. The system takes advantage of the very active and precise 3' exonuclease activity of T4 DNA polymerase to produce single-stranded (ss) ends (cut-back) of vector and insert DNA. This results in the highly efficient directional cloning of cDNA and PCR-amplified DNA. The system obviates the need to digest insert DNA with a restriction endonuclease to unveil cloning sites, and thus eliminates the chance of internal digestion of the insert DNA. The cloning of PCR-amplified DNA, which is sometimes difficult, is made routine with this system. The 'Prime' sequence is included in vector cloning sites and cDNA and PCR primers. The 'Prime' sequence was chosen so that the ss sticky ends are nonpalindromic and will hybridize only to the appropriate partners. This makes cloning with the 'Prime' system very efficient, because neither the vector nor insert DNA is lost to unproductive self-hybridization.     

Isolation of DNA from the Uncultured “Candidatus Liberobacter” Species Associated with Citrus Huanglongbing by RAPD

“Candidatus Liberobacter,” the uncultured bacterium associated with citrus Huanglongbing (HLB) disease, is an α-Proteobacteria, and two species, “Candidatus L. africanum” and “Candidatus L. asiaticum,” have been characterized by sequence analysis of the 16S rDNA and β operon (rplKAJL-rpoBC) genes. These genes were isolated by PCR and random cloning of DNA from infected plants. However, this strategy is laborious and allowed selection of only three Liberobacter DNA fragments. In this paper, we described isolation of additional genes using Random Amplified Polymorphic DNA (RAPD). In total, 102 random 10-mer primers were used in PCR reactions on healthy and Liberobacter-infected plant DNA. Eight DNA bands amplified from infected plant DNA were cloned and analyzed. Six of them were found to be part of the Liberobacter genome by sequence and hybridization experiments. On these DNA fragments, four genes were identified: nusG, pgm, omp, and a hypothetical protein gene. These results indicate that RAPD can be used to clone DNA of uncultured organisms. Received: 14 September 1998 / Accepted: 6 October 1998     

Subtractive Cloning of DNA from Polymyxa graminis– an Obligate Parasitic Plasmodiophorid

A simple subtractive hybridization was applied for cloning of Polymyxa graminis deoxyribonucleic acid (DNA). Total DNA preparations from concentrated P. graminis resting spores and from roots of non‐infested (healthy) barley were digested with different restriction enzymes and batch hybridized, followed by cloning in a plasmid vector. Sequencing and blast analysis of coincidentally selected clones enabled construction of polymerase chain reaction primers specific to P. graminis DNA. Four Polymyxa‐specific primers showed different affinities to DNA of type I and type II P. graminis and to DNA of P. betae.     

Haplorchis taichui, Witenberg, 1930: Development of a HAT-RAPD marker for the detection of minute intestinal fluke infection

Specific primers to determine the presence of an intestinal fluke, Haplorchis taichui, were investigated using the high annealing temperature random amplified polymorphic DNA (HAT-RAPD) PCR, and 18 arbitrary primers (Operon Technologies), to generate different polymorphic DNA profiles. Thirteen kinds of parasites were used to compare fingerprints. A 256 bp HAT-RAPD marker, generated from the OPP-11 primer, was found to be H. taichui-specific, and this marker was cloned, transformed, and sequenced. From the sequence data, a pair of primers were designed with Genetyx-MAC ver.11 and indicated as: Hap-t F 5′-GGC CAA CGC AAT CGT CAT CC-3′ and Hap-t R 5′-GCG TCG GGT TTC AGA CAT GG-3′. These specific primers were tested for efficacy and specificity by amplifying them with all 13 parasites DNAs in PCR reaction. A 256 bp amplicon was generated, which was shown to have a positive result, only for H. taichui DNA. It revealed no cross-reaction with any of the other tested parasite species. The minimum DNA template, needed for detection by PCR, was 0.1 picogram (pg). The successful development of H. taichui-specific primers is expected to be beneficial for epidemiological studies and for prevention and control of these parasitic infections.     

Universal CG cloning of polymerase chain reaction products

Single-insert cloning of DNA fragments without restriction enzymes has traditionally been achieved using TA cloning, with annealing of a polymerase chain reaction (PCR) fragment containing a single overhanging 3′ A to a plasmid vector containing a 3′ T. In this article, we show that the analogous “CG cloning” is faster and far more efficient, using AhdI to generate a C-vector. For an afternoon ligation, CG cloning achieved double the cloning efficiency and more than 4-fold the number of transformants compared with TA cloning. However, blunt-end ligation was markedly more efficient than both. CG cloning could prove to be extremely useful for single-copy high-throughput cloning.     

The terminal 5′ phosphate and proximate phosphorothioate promote ligation‐independent cloning

Function studies of many proteins are waited to develop after genome sequencing. High‐throughout technology of gene cloning will strongly promote proteins' function studies. Here we describe a ligation‐independent cloning (LIC) method, which is based on the amplification of target gene and linear vector by PCR using phosphorothioate‐modified primers and the digestion of PCR products by λ exonuclease. The phosphorothioate inhibits the digestion and results in the generation of 3′ overhangs, which are designed to form complementary double‐stranded DNA between target gene and linear vector. We compared our phosphorothioate primer cloning methods with several LIC methods, including dU primer cloning, hybridization cloning, T4 DNA polymerase cloning, and in vivo recombination cloning. The cloning efficiency of these LIC methods are as follows: phosphorothioate primer cloning > dU primer cloning > hybridization cloning > T4 DNA polymerase cloning >> in vivo recombination cloning. Our result shows that the 3′ overhangs is a better cohesive end for LIC than 5′ overhang and the existence of 5′phosphate promotes DNA repair in Escherichia coli, resulting in the improvement of cloning efficiency of LIC. We succeeded in constructing 156 expression plasmids of Aeropyrum pernix genes within a week using our method.     

An efficient method for generation and subcloning of tandemly repeated DNA sequences with defined length, orientation and spacing.

Tandemly repeated DNA sequences generated from single synthetic oligonucleotide monomers are useful for many purposes. With conventional ligation procedures low yields and random orientation of oligomers makes cloning of defined repeated sequences difficult. We solved these problems using 2 bp overhangs to direct orientation and random incorporation of linkers containing restriction sites during ligation. Ligation products are amplified by PCR using the linker oligonucleotides as primers. Restriction digestion of the PCR products generate multimer distributions whose length is controlled by the monomer/linker ratio. The concatenated DNA fragments of defined length, orientation and spacing can be directly used for subcloning or other applications without further treatment.     

Directional cloning of native PCR products with preformed sticky ends (Autosticky PCR)

A novel method for the directional cloning of native PCR products was developed. Abasic sites in DNA templates make DNA polymerases stall at the site during synthesis of the complementary strand. Since the 5′ ends of PCR product strands contain built-in amplification primers, abasic sites within the primers result in the formation of 5′ single-stranded overhangs at the ends of the PCR product, enabling its direct ligation to a suitably cleaved cloning vector without any further modification. This “autosticky PCR” (AS-PCR) overcomes the problems caused by end sensitivity of restriction enzymes, or internal restriction sites within the amplified sequences, and enables the generation of essentially any desired 5′ overhang. Received: 11 August 1998 / Accepted: 2 October 1998