Cloning of Pichia pastoris Fet3: insights into the high affinity iron uptake system

High-affinity iron uptake by yeast cells appears to require the presence of a complex formed on the plasma membrane by the multicopper oxidase Fet3 and the permease Ftr1 which work together to allow iron to enter safely inside the cell. The Pichia pastoris ferroxidase Fet3 has been cloned and it has been found to display high sequence similarity to other yeast multicopper oxidases, including all the predicted ligands for the catalytic copper atoms and for the iron substrate. P. pastoris appears to possess a high-affinity iron uptake system similar to that of S. cerevisiae, as far as regulation of expression is concerned. However, the P. pastoris high-affinity iron uptake system presents a K(m) value for iron almost ten times higher than that of S. cerevisiae, possibly to control iron fluxes over a wider range of concentrations of this metal, in order to avoid toxic iron overloading.     

Structure-function analysis of the cuprous oxidase activity in Fet3p from Saccharomyces cerevisiae

The Fet3 protein from Saccharomyces cerevisiae is a multicopper oxidase with specificity toward Fe(II) and Cu(I). Fet3p turnover of Fe(II) supports high affinity iron uptake across the yeast plasma membrane, whereas its turnover of Cu(I) contributes to copper resistance in yeast. The structure of Fet3p has been used to identify possible amino acid residues responsible for this protein's reactivity with Cu(I), and structure-function analyses have confirmed this assignment. Fet3p Met(345) is required for the enzyme's reactivity toward Cu(I). Although the Fet3pM345A mutant exhibits wild type spectral and electrochemical behavior, the kinetic constants for Cu(I) turnover and for single-turnover electron transfer from Cu(I) to the enzyme are significantly reduced. The specificity constant with Cu(I) as substrate is reduced by one-fifth, whereas the electron transfer rate from Cu(I) is reduced 50-fold. This mutation has little effect on the reactivity toward Fe(II), indicating that Met(345) contributes specifically to Fet3p reactivity with the cuprous ion. These kinetic defects render the Fet3pM345A unable to support wild type cellular copper resistance, suggesting that there is a finely tuned copper redox balance at the yeast plasma membrane.     

The yeast multicopper oxidase Fet3p and the iron permease Ftr1p physically interact

High affinity iron uptake in yeast is carried out by a multicomponent system formed by the ferroxidase Fet3p and the iron permease Ftr1p. The currently accepted model predicts that Fet3p and Ftr1p are functionally associated, however, a structural interaction between these two proteins has not been proven yet. The methylotrophic yeast Pichia pastoris has been used to perform cross-linking studies aimed to demonstrate the existence of a Fet3p-Ftr1p complex. Cross-linking of membrane suspensions with the membrane-impermeable reagents DTSSP and BS(3) has evidenced the presence of a high molecular weight band with Fet3p oxidase activity. This band has been purified and subjected to N-terminal sequence analysis. Two sequences were found in the cross-linked species, one of which could be assigned to Fet3p and the other to Ftr1p. This is the first experimental demonstration that Fet3p and Ftr1p are physically associated.     

Site-directed mutagenesis of human ceruloplasmin:. production of a proteolytically stable protein and structure-activity relationships of type 1 sites

A fully active recombinant human ceruloplasmin was obtained, and it was mutated to produce a ceruloplasmin stable to proteolysis. The stable ceruloplasmin was further mutated to perturb the environment of copper at the type 1 copper sites in two different domains. The wild type and the mutated ceruloplasmin were produced in the yeast Pichia pastoris and characterized. The mutations R481A, R701A, and K887A were at the proteolytic sites, did not alter the enzymatic activity, and were all necessary to protect ceruloplasmin from degradation. The mutation L329M was at the tricoordinate type 1 site of the domain 2 and was ineffective to induce modifications of the spectroscopic and catalytic properties of ceruloplasmin, supporting the hypothesis that this site is reduced and locked in a rigid frame. In contrast the mutation C1021S at the type 1 site of domain 6 substantially altered the molecular properties of the protein, leaving a small fraction endowed with oxidase activity. This result, while indicating the importance of this site in stabilizing the overall protein structure, suggests that another type 1 site is competent for dioxygen reduction. During the expression of ceruloplasmin, the yeast maintained a high level of Fet3 that was released from membranes of yeast not harboring the ceruloplasmin gene. This indicates that expression of ceruloplasmin induces a state of iron deficiency in yeast because the ferric iron produced in the medium by its ferroxidase activity is not available for the uptake.     

Core glycan in the yeast multicopper ferroxidase, Fet3p: A case study of N-linked glycosylation, protein maturation, and stability

Glycosylation is essential to the maintenance of protein quality in the vesicular protein trafficking pathway in eukaryotic cells. Using the yeast multicopper oxidase, Fet3p, the hypothesis is tested that core glycosylation suppresses Fet3p nascent chain aggregation during synthesis into the endoplasmic reticulum (ER). Fet3p has 11 crystallographically mapped N‐linked core glycan units. Assembly of four of these units is specifically required for localization of Fet3p to the plasma membrane (PM). Fet3 protein lacking any one of these glycan units is found in an intracellular high‐molecular mass species resolvable by blue native gel electrophoresis. Individually, the remaining glycan moieties are not required for ER exit; however, serial deletion of these by N → A substitution correlates with these desglycan species failure to exit the ER. Desglycan Fet3 proteins that localize to the PM are wild type in function indicating that the missing carbohydrate is not required for native structure and biologic activity. This native function includes the interaction with the iron permease, Ftr1p, and wild type high‐affinity iron uptake activity. The four essential sequons are found within relatively nonpolar regions located in surface recesses and are strongly conserved among fungal Fet3 proteins. The remaining N‐linked sites are found in more surface exposed, less nonpolar environments, and their conservation is weak or absent. The data indicate that in Fet3p the N‐linked glycan has little effect on the enzyme's molecular activity but is critical to its cellular activity by maximizing the protein's exit from the ER and assembly into a functional iron uptake complex.     

Targeted suppression of the ferroxidase and iron trafficking activities of the multicopper oxidase Fet3p from<Emphasis Type="Italic"> Saccharomyces cerevisiae</Emphasis>

The Fet3 protein in Saccharomyces cerevisiae is a multicopper oxidase tethered to the outer surface of the yeast plasma membrane. Fet3p catalyzes the oxidation of Fe(2+) to Fe(3+); this ferroxidation reaction is an obligatory first step in high-affinity iron uptake through the permease Ftr1p. Here, kinetic analyses of several Fet3p mutants identify residues that contribute to the specificity that Fet3p has for Fe(2+), one of which is essential also to the coupling of the ferroxidase and uptake processes. The spectral and kinetic properties of the D278A, E185D and A, Y354F and A, and E185A/Y354A mutants of a soluble form of Fet3p showed that all of the mutants exhibited the normal absorbance at 330 nm and 608 nm due to the type 3 and type 1 copper sites in Fet3p, respectively. The EPR spectra of the mutants were also equivalent to wild-type, showing that the type 1 and type 2 Cu(II) sites in the proteins were not perturbed. The only marked kinetic defects measured in vitro were increases in K(M) for Fe(2+) exhibited by the D278A, E185A, Y354A, and E185A/Y354A mutants. These results suggest that these three residues contribute to the ferroxidase specificity site in Fet3p. In vivo analysis of these mutant proteins in their membrane-bound form showed that only E185 mutants exhibited kinetic defects in (59)Fe uptake. For the Fet3p(E185D) mutant, K(M) for iron was 300-fold greater than the wild-type K(M), while Fet3p(E185A) was completely inactive in support of iron uptake. In situ fluorescence demonstrated that all of the mutant Fet3 proteins, in complex with an Ftr1p:YFP fusion protein, were trafficked normally to the plasma membrane. These results suggest that E185 contributes to Fe(2+ )binding to Fet3p and to the subsequent trafficking of the Fe(3+) produced to Ftr1p.     

Spectroscopic analysis of the trinuclear cluster in the Fet3 protein from yeast, a multinuclear copper oxidase

The Fet3 protein (Fet3p) is a multinuclear copper oxidase essential for high-affinity iron uptake in yeast. Fet3p contains one type 1, one type 2, and a strongly antiferromagnetically coupled binuclear Cu(II)-Cu(II) type 3 copper. The type 2 and type 3 sites constitute a structurally distinct trinuclear cluster at which dioxygen is reduced to water. In Fet3p, as in ceruloplasmin, Fe(II) is oxidized to Fe(III) at the type 1 copper; this is the ferroxidase reaction that is fundamental to the physiologic function of these two enzymes. Using site-directed mutagenesis, we have generated type 1-depleted (T1D), type 2-depleted (T2D), and T1D/T2D mutants. None were active in the essential ferroxidase reaction catalyzed by Fet3p. However, the spectroscopic signatures of the remaining Cu(II) sites in any one of the three mutants were indistinguishable from those exhibited by the wild type. Although the native protein and the T1D mutant were isolated in the completely oxidized Cu(II) form, the T2D and T1D/T2D mutants were found to be completely reduced. This result is consistent with the essential role of the type 2 copper in dioxygen turnover, and with the suggestions that cuprous ion is the valence state of intracellular copper. Although stable to dioxygen, the Cu(I) sites in both proteins were readily oxidized by hydrogen peroxide. The double mutant was extensively analyzed by X-ray absorption spectroscopy. Edge and near-edge features clearly distinguished the oxidized from the reduced form of the binuclear cluster. EXAFS was strongly consistent with the expected coordination of each type 3 copper by three histidine imidazoles. Also, copper scattering was observed in the oxidized cluster along with scattering from a ligand corresponding to a bridging oxygen. The data derived from the reduced cluster indicated that the bridge was absent in this redox state. In the reduced form of the double mutant, an N/O ligand was apparent that was not seen in the reduced form of the T1D protein. This ligand in T1D/T2D could be either the remaining type 2 copper imidazole ligand (from His416) or a water molecule that could be stabilized at the type 3 cluster by H-bonding to this side chain. If present in the native protein, this H(2)O could provide acid catalysis of dioxygen reduction at the reduced trinuclear center.     

Expression and purification of the recombinant His-tagged GST-CD38 fusion protein using the baculovirus/insect cell expression system

CD38 is a type II transmembrane glycoprotein found in myriad mammalian tissues and cell types. It is known for its involvement in the metabolism of cyclic ADP-ribose and nicotinic acid adenine dinucleotide phosphate, two nucleotides with calcium mobilizing activity independent of inositol trisphosphate. CD38 itself has been shown to have clinical significance in certain diseases with possible utilization in diagnostic and prognostic applications. Previous studies on several autoimmune diseases have shown the usefulness of recombinant CD38 protein expressed from Escherichia coli and Pichia pastoris in the detection of autoantibodies to CD38 via Western blot and ELISA. In this study, we produced a 6 x His-tagged GST-CD38 fusion protein using a recombinant baculovirus/insect cell expression technique that was purified as a soluble protein. The fusion protein was purified to homogeneity by affinity and gel filtration chromatography steps. It has an apparent molecular mass of 56 kDa on SDS-PAGE gel stained with Coomassie blue and was recognized on Western blots by antibodies against human CD38 as well as the polyhistidine tag. Peptide mass fingerprinting analysis confirmed the identity of human CD38 in the fusion protein.     

Purification and characterization of keratinase from recombinant Pichia and Bacillus strains

The keratinase gene from Bacillus licheniformis MKU3 was cloned and successfully expressed in Bacillus megaterium MS941 as well as in Pichia pastoris X33. Compared with parent strain, the recombinant B. megaterium produced 3-fold increased level of keratinase while the recombinant P. pastoris strain had produced 2.9-fold increased level of keratinase. The keratinases from recombinant P. pastoris (pPZK3) and B. megaterium MS941 (pWAK3) were purified to 67.7- and 85.1-folds, respectively, through affinity chromatography. The purified keratinases had the specific activity of 365.7 and 1277.7 U/mg, respectively. Recombinant keratinase from B. megaterium was a monomeric protein with an apparent molecular mass of 30 kDa which was appropriately glycosylated in P. pastoris to have a molecular mass of 39 kDa. The keratinases from both recombinant strains had similar properties such as temperature and pH optimum for activity, and sensitivity to various metal ions, additives and inhibitors. There was considerable enzyme stability due to its glycosylation in yeast system. At pH 11 the glycosylated keratinase retained 95% of activity and 75% of its activity at 80 degrees C. The purified keratinase hydrolyzed a broad range of substrates and displayed effective degradation of keratin substrates. The K(m) and V(max) of the keratinase for the substrate N-succinyl-Ala-Ala-Pro-Phe-pNA was found to be 0.201 mM and 61.09 U/s, respectively. Stability in the presence of detergents, surfactants, metal ions and solvents make this keratinase suitable for industrial processes.     

A Novel Extracellular Multicopper Oxidase from Phanerochaete chrysosporium with Ferroxidase Activity

Lignin degradation by the white rot basidiomycete Phanerochaete chrysosporium involves various extracellular oxidative enzymes, including lignin peroxidase, manganese peroxidase, and a peroxide-generating enzyme, glyoxal oxidase. Recent studies have suggested that laccases also may be produced by this fungus, but these conclusions have been controversial. We identified four sequences related to laccases and ferroxidases (Fet3) in a search of the publicly available P. chrysosporium database. One gene, designated mco1, has a typical eukaryotic secretion signal and is transcribed in defined media and in colonized wood. Structural analysis and multiple alignments identified residues common to laccase and Fet3 sequences. A recombinant MCO1 (rMCO1) protein expressed in Aspergillus nidulans had a molecular mass of 78 kDa, as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and the copper I-type center was confirmed by the UV-visible spectrum. rMCO1 oxidized various compounds, including 2,2′-azino(bis-3-ethylbenzthiazoline-6-sulfonate) (ABTS) and aromatic amines, although phenolic compounds were poor substrates. The best substrate was Fe²⁺, with a K_m close to 2 μM. Collectively, these results suggest that the P. chrysosporium genome does not encode a typical laccase but rather encodes a unique extracellular multicopper oxidase with strong ferroxidase activity.     

Molecular cloning of the cDNA encoding laccase from Pycnoporus cinnabarinus I-937 and expression in Pichia pastoris.

Laccases are multicopper-containing enzymes which catalyse the oxidation of phenolic and nonphenolic compounds with the concomitant reduction of molecular oxygen. In this study, a full-length cDNA coding for laccase (lac1) from Pycnoporus cinnabarinus I-937 was isolated and characterized. The corresponding open reading frame is 1557 nucleotides long and encodes a protein of 518 amino acids. The cDNA encodes a precursor protein containing a 21 amino-acid signal sequence corresponding to a putative signal peptide. The deduced amino-acid sequence of the encoded protein was similar to that of other laccase proteins, with the residues involved in copper coordination sharing the greatest extent of similarity. The cDNA encoding for laccase was placed under the control of the alcohol oxidase (Aox 1) promoter and expressed in the methylotropic yeast Pichia pastoris. The laccase leader peptide, as well as the Saccharomyces cerevisiae alpha-factor signal peptide, efficiently directed the secretion into the culture medium of laccase in an active form. Moreover, the laccase activity was directly detected in plates. The identity of the recombinant product was further confirmed by protein immunoblotting. The expected molecular mass of the mature protein is 81 kDa. However, the apparent molecular mass of the recombinant protein is 110 k Da, thus suggesting that the protein expressed in P. pastoris may be hyperglycosylated.     

Expression and analysis of the glycosylation properties of recombinant human erythropoietin expressed in Pichia pastoris

The Pichia pastoris expression system was used to produce recombinant human erythropoietin, a protein synthesized by the adult kidney and responsible for the regulation of red blood cell production. The entire recombinant human erythropoietin (rhEPO) gene was constructed using the Splicing by Overlap Extension by PCR (SOE-PCR) technique, cloned and expressed through the secretory pathway of the Pichia expression system. Recombinant erythropoietin was successfully expressed in P. pastoris. The estimated molecular mass of the expressed protein ranged from 32 kDa to 75 kDa, with the variation in size being attributed to the presence of rhEPO glycosylation analogs. A crude functional analysis of the soluble proteins showed that all of the forms were active in vivo.     

Fre1p Cu2+ reduction and Fet3p Cu1+ oxidation modulate copper toxicity in Saccharomyces cerevisiae

Fre1p is a metalloreductase in the yeast plasma membrane that is essential to uptake of environmental Cu2+ and Fe3+. Fet3p is a multicopper oxidase in this membrane essential for high affinity iron uptake. In the uptake of Fe3+, Fre1p produces Fe2+ that is a substrate for Fet3p; the Fe3+ produced by Fet3p is a ligand for the iron permease, Ftr1p. Deletion of FET3 leads to iron deficiency; this deletion also causes a copper sensitivity not seen in wild type. Deletion of FTR1 leads to copper sensitivity also. Production in the ftr1delta strain of an iron-uptake negative Ftr1p mutant, Ftr1p(RAGLA), suppressed this copper sensitivity. This Ftr1p mutant supported the plasma membrane targeting of active Fet3p that is blocked in the parental ftr1delta strain. A ferroxidase-negative Fet3p did not suppress the copper sensitivity in a fet3delta strain, although it supported the plasma membrane localization of the Fet3p.Ftr1p complex. Thus, loss of membrane-associated Fet3p oxidase activity correlated with copper sensitivity. Furthermore, in vitro Cu1+ was shown to be an excellent substrate for Fet3p. Last, the copper sensitivity of the fet3delta strain was suppressed by co-deletion of FRE1, suggesting that the cytotoxic species was Cu1+. In contrast, deletion of CTR1 or of FET4 did not suppress the copper sensitivity in the fet3delta strain; these genes encode the two major copper transporters in laboratory yeast strains. This result indicated that the apparent cuprous ion toxicity was not due to excess intracellular copper. These biochemical and physiologic results indicate that at least with respect to cuprous and ferrous ions, Fet3p can be considered a metallo-oxidase and appears to play an essential role in both iron and copper homeostasis in yeast. Its functional homologs, e.g. ceruloplasmin and hephaestin, could play a similar role in mammals.     

Soluble and membrane-associated human low-affinity adenosine binding protein (adenotin): properties and homology with mammalian and avian stress proteins

A low-affinity adenosine binding protein has recently been distinguished from the adenosine A2 receptor and purified from human placental membranes. Soluble human placental extracts contain an adenosine binding activity that has properties similar to those of the membrane low-affinity adenosine binding protein. The binding protein was purified from soluble human placental extracts 134-fold to 89% purity with a Bmax of 2.5 nmol/mg. It comprises 0.7-0.9% of the soluble protein. The major purified soluble protein has a subunit molecular mass of 98 kDa and a Stokes radius identical with that of the membrane-bound adenosine binding protein. Competition analysis of the soluble protein revealed similar affinities and an identical potency order for displacement of 5'-(N-ethylcarbamoyl)[2,8-3H]adenosine ([3H]NECA) as follows: NECA greater than 2-chloroadenosine greater than adenosine greater than (R)-N6-(2-phenylisopropyl)adenosine. The soluble binding protein was more acidic than the membrane binding protein as revealed by a comparison of the elution properties during ion exchange chromatography. A second form of soluble adenosine binding activity comprised 17% of the major form and had a charge similar to that of the membrane binding protein, a smaller Stokes radius, and a subunit molecular mass of 74 kDa. Carbohydrate composition analysis revealed that the major soluble form has 4.3% carbohydrate by weight as compared to the membrane-associated form, which has 5.5% carbohydrate by weight.(ABSTRACT TRUNCATED AT 250 WORDS)     

Expression and Antigenic Characterization of the Epitope-G1 of the Bovine Ephemeral Fever Virus Glycoprotein in Pichia pastoris

The epitope-G1 gene of Bovine ephemeral fever virus(BEFV) glycoprotein was synthesised by PCR and cloned into expression vector pPIC9K to construct recombinant plasmid pPIC9K-G1.Then the pPIC9K-G1 was linearized and transformed into Pichia pastoris GS115.The recombinant P.pastoris strains were selected by a G418 transformation screen and confirmed by PCR.After being induced with methanol,an expressed protein with 26 kDa molecular weight was obtained,which was much bigger than the predicted size(15.54 kDa).Deglycosylation analysis indicated the recombinant G1 was glycosylated.Western blot and ELISA tests,as well as rabbit immunization and specificity experiments indicated that the target protein had both higher reaction activity and higher immunocompetence and specificity.The recombinant G1 protein could be used as a coating antigen to develop an ELISA kit for bovine ephemeral fever diagnosis.     

Regulation of extracellular copper-binding proteins in copper-resistant and copper-sensitive mutants of Vibrio alginolyticus.

Extracellular proteins of wild-type Vibrio alginolyticus were compared with those of copper-resistant and copper-sensitive mutants. One copper-resistant mutant (Cu40B3) constitutively produced an extracellular protein with the same apparent molecular mass (21 kDa) and chromatographic behavior as copper-binding protein (CuBP), a copper-induced supernatant protein which has been implicated in copper detoxification in wild-type V. alginolyticus. Copper-sensitive V. alginolyticus mutants displayed a range of alterations in supernatant protein profiles. CuBP was not detected in supernatants of one copper-sensitive mutant after cultures had been stressed with 50 microM copper. Increased resistance to copper was not induced by preincubation with subinhibitory levels of copper in the wild type or in the copper-resistant mutant Cu40B3. Copper-resistant mutants maintained the ability to grow on copper-amended agar after 10 or more subcultures on nonselective agar, demonstrating the stability of the phenotype. A derivative of Cu40B3 with wild-type sensitivity to copper which no longer constitutively expressed CuBP was isolated. The simultaneous loss of both constitutive CuBP production and copper resistance in Cu40B3 indicates that constitutive CuBP production is necessary for copper resistance in this mutant. These data support the hypothesis that the extracellular, ca. 20-kDa protein(s) of V. alginolyticus is an important factor in survival and growth of the organism at elevated copper concentrations. The range of phenotypes observed in copper-resistant and copper-sensitive V. alginolyticus indicate that altered sensitivity to copper was mediated by a variety of physiological changes.     

Expression of a Phanerochaete chrysosporium manganese peroxidase gene in the yeast Pichia pastoris

A gene encoding manganese peroxidase (mnp1) from Phanerochaete chrysosporium was cloned downstream of a constitutive glyceraldehyde-3-phosphate dehydrogenase promoter in the methylotrophic yeast Pichia pastoris. Three different expression vectors were constructed: pZBMNP contains the native P. chrysosporium fungal secretion signal, palphaAMNP contains an alpha-factor secretion signal derived from Saccharomyces cerevisiae, and pZBIMNP has no secretion signal and was used for intracellular expression. Both the native fungal secretion signal sequence and alpha-factor secretion signal sequence directed the secretion of active recombinant manganese peroxidase (rMnP) from P. pastoris transformants. The majority of the rMnP produced by P. pastoris exhibited a molecular mass (55-100 kDa) considerably larger than that of the wild-type manganese peroxidase (wtMnP, 46 kDa). Deletion of the native fungal secretion signal yielded a molecular mass of 39 kDa for intracellular rMnP in P. pastoris. Treatment of the secreted rMnP with endoglycosidase H (Endo H) resulted in a considerable decrease in the mass of rMnP, indicating N-linked hyperglycosylation. Partially purified rMnP showed kinetic characteristics similar to those of wtMnP. Both enzymes also had similar pH stability profiles. Addition of exogenous Mn(II), Ca(II), and Fe(III) conferred additional thermal stability to both enzymes. However, rMnP was slightly less thermostable than wtMnP, which demonstrated an extended half-life at 55 degrees C.     

Expression of recombinant hybrid peptide cecropinA(1-8)-magainin2(1-12) in Pichia pastoris: purification and characterization

Hybrid antibacterial peptide CA-MA (cecropinA(1-8)-magainin2(1-12)) is a linear cationic peptide that has potent antimicrobial properties without hemolytic activity. To explore a new approach of expression of hybrid peptide CA-MA in methylotrophic yeast, Pichia pastoris, the gene of CA-MA was obtained by recursive PCR (rPCR) and cloned into the vector pPICZalpha-A. The SalI-linearized plasmid pPICZalpha-CA-MA was transformed into P. pastoris SMD1168 by electroporation. The expression was induced for 96h with 1.0% methanol at 28 degrees C, pH 5.0. Recombinant CA-MA was purified by reversed-phase HPLC and 22 mg pure active CA-MA was obtained from 1L fermentation culture. Tricine-SDS-PAGE indicated that recombinant CA-MA protein molecular weight is 2.6 kDa. Mass spectrometry of purified CA-MA demonstrated a single large signal for the molecular ion [M+2H+](2+) at 1281.07 m/z, identical to that of the putative protein (2.56 kDa). Antimicrobial assays showed that CA-MA has a broad spectrum of antimicrobial property against fungi, as well as Gram-positive and Gram-negative bacteria. This is the first report on the heterologous expression of a hybrid antibacterial peptide with molecular weight below 3.0 kDa in P. pastoris. Our results demonstrate that functional CA-MA can be produced in sufficient quantities using P. pastoris for use in further studies on functionality and diagnostic applications.     

Large-scale production,purification, and characterisation of recombinant Phaseolus vulgaris phytohemagglutinin E-form expressed in the methylotrophic yeast Pichia pastoris

The kidney bean lectin Phaseolus vulgaris phytohemagglutinin E-form (PHA-E) was expressed and secreted by the methylotrophic yeast Pichia pastoris. To optimise yields of PHA-E, transformants of P. pastoris were selected for high-level production of the recombinant protein. A scaleable process for the production and purification of gram quantities of recombinant PHA-E is reported. PHA-E was secreted at approximately 100 mg/L at the 2- and 200-L scale and was purified to 95% homogeneity in a single step using cation-exchange chromatography. The purified recombinant PHA-E consists of four forms with molecular masses between 28.5 and 31.5 kDa, as assessed by MALDI-TOF, whereas its native counterpart has a molecular mass of approximately 30.5 kDa. Endoglycosidase treatment revealed that the range in size of the recombinant protein was attributed to differences in the nature of the N-linked oligosaccharides bound to the protein. The primary amino acid sequence of the recombinant PHA-E was found to be identical to the native protein and to have an agglutination activity similar to that of native PHA-E. The data presented here suggest that, using P. pastoris, gram quantities of a recombinant phytohemagglutinin E-form can be produced and that the recombinant protein is similar to the protein synthesised in plants with respect to structure and biological activity.