Growth kinetics and scale-up of <Emphasis Type="Italic">Agrobacterium tumefaciens</Emphasis>

Production of recombinant proteins in plants through Agrobacterium-mediated transient expression is a promising method of producing human therapeutic proteins, vaccines, and commercial enzymes. This process has been shown to be viable at a large scale and involves growing large quantities of wild-type plants and infiltrating the leaf tissue with a suspension of Agrobacterium tumefaciens bearing the genes of interest. This study examined one of the steps in this process that had not yet been optimized: the scale-up of Agrobacterium production to sufficient volumes for large-scale plant infiltration. Production of Agrobacterium strain C58C1 pTFS40 was scaled up from shake flasks (50–100 mL) to benchtop (5 L) scale with three types of media: Lysogeny broth (LB), yeast extract peptone (YEP) media, and a sucrose-based defined media. The maximum specific growth rate (μ _max) of the strain in the three types of media was 0.46 ± 0.04 h^?1 in LB media, 0.43 ± 0.03 h^?1 in YEP media, and 0.27 ± 0.01 h^?1 in defined media. The maximum biomass concentration reached at this scale was 2.0 ± 0.1, 2.8 ± 0.1, and 2.6 ± 0.1 g dry cell weight (DCW)/L for the three media types. Production was successfully scaled up to a 100-L working volume reactor with YEP media, using k _L a as the scale-up parameter.     

Chromatographic profiles of tryptophan and kynurenine enantiomers derivatized with (S)‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole using LC–MS/MS on a triazole‐bonded column

d ‐ and l ‐Tryptophan (Trp) and d ‐ and l ‐kynurenine (KYN) were derivatized with a chiral reagent, (S )‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole (DBD‐PyNCS), and were separated enantiomerically by high‐performance liquid chromatography (HPLC) equipped with a triazole‐bonded column (Cosmosil HILIC) using tandem mass spectrometric (MS/MS) detection. Effects of column temperature, salt (HCO₂NH₄) concentration, and pH of the mobile phase in the enantiomeric separation, followed by MS detection of (S )‐DBD‐PyNCS‐d ,l ‐Trp and ‐d ,l ‐KYN, were investigated. The mobile phase consisting of CH₃CN/10 mM ammonium formate in H₂O (pH 5.0) (90/10) with a column temperature of 50–60 °C gave satisfactory resolution (R s) and mass‐spectrometric detection. The enantiomeric separation of d ,l ‐Trp and d ,l ‐KYN produced R s values of 2.22 and 2.13, and separation factors (α) of 1.08 and 1.08, for the Trp and KYN enantiomers, respectively. The proposed LC–MS/MS method provided excellent detection sensitivity of both enantiomers of Trp and KYN (5.1–19 nM).     

Use of response surface methodology to study the effect of media composition on aflatoxin production by Aspergillus flavus

Aflatoxins are one of the most important secondary metabolites. These extrolites are produced by a number of Aspergillus fungi. In this study, we demonstrate the effect of media components and enhanced aflatoxin yield shown by A. flavus using response surface methodology in response to different nutrients. Different components of a chemically defined media that influence the aflatoxin production were monitored using Plackett–Burman experimental design and further optimized by Box–Behnken factorial design of response surface methodology in liquid culture. Interactions were studied with five variables, namely sorbitol, fructose, ammonium sulfate, KH₂PO₄, and MgSO₄.7H₂O. Maximum aflatoxin production was envisaged in medium containing 4.94 g/l sorbitol, 5.56 g/l fructose, 0.62 g/l ammonium sulfate, 1.33 g/l KH₂PO₄, and 0.65 g/l MgSO₄·7H₂O using response surface plots and the point prediction tool of the DESIGN EXPERT 8.1.0 (Stat-Ease, USA) software. However, a production of 5.25 μg/ml aflatoxin production was obtained, which was in agreement with the prediction observed in verification experiment. The other component (MgSO₄.7H₂O) was found to be an insignificant variable.     

Culture medium improvement for Isaria fumosorosea submerged conidia production

Submerged conidia and blastospores of the entomopathogenic fungus Isaria fumosorosea are produced in several liquid culture media. However, yields and the ecological fitness of these propagules vary according to culture media composition. In most culture media, hyphae, blastospores and submerged conidia are white but we found that in some media they develop a brown pigmentation. A dark pigment was extracted from brown-pigmented propagules and analyzed by IR spectroscopy. Adsorption bands coincided to those characteristics of melanins.Hadamard's matrices were employed in order to increase submerged conidia yields and brown pigmentation of fungal propagules. Media containing 20–30 mg/l of FeSO₄·7H₂O and 6–12 mg/l of CuSO₄·5H₂O allowed reaching the highest pigmentation (9 in a hedonic scale). A maximal concentration of submerged conidia of 1.0 (±1.2) × 10¹² cell/l was achieved after 120 h of liquid culture in a improved culture medium, containing 25 ml/l of Polyethylene glycol (MW 200), substance which enhanced submerged conidia production, reducing free mycelia or mycelial pellets formation. In the improved medium, it was estimated that more than 60% of produced biomass corresponded to submerged conidia and blastospores, while in other media, mycelia were the main product (80–97%).     

Optimal C:N ratio for the production of red pigments by Monascus ruber

The carbon-to-nitrogen (C:N) ratio in the biomass of microfungi tends to be quite different (e.g. 10–15) compared with the C:N ratio in the red pigments (e.g. >20) of the fungus Monascus ruber. Therefore, determining an optimal C:N ratio in the culture medium for maximizing the production of the pigments is important. A culture medium composition is established for maximizing the production of the red pigment by the fungus M. ruber ICMP 15220 in submerged culture. The highest volumetric productivity of the red pigment was 0.023 AU L^?1 h^?1 in a batch culture (30 °C, initial pH of 6.5) with a defined medium of the following composition (g L^?1): glucose (10), monosodium glutamate (MSG) (10), MgSO₄·7H₂O (0.5), KH₂PO₄ (5), K₂HPO₄ (5), ZnSO₄·7H₂O (0.01), FeSO₄·7H₂O (0.01), CaCl₂ (0.1), MnSO₄·H₂O (0.03). This medium formulation had a C:N mole ratio of 9:1. Under these conditions, the specific growth rate of the fungus was 0.043 h^?1 and the peak biomass concentration was 6.7 g L^?1 in a 7-day culture. The biomass specific productivity of the red pigment was 1.06 AU g^?1 h^?1. The best nitrogen source proved to be MSG although four other inorganic nitrogen sources were evaluated.     

Production of Alcaligenes xylosoxydans EMS33 in a Bench-scale Fermenter

Summary Optimization of medium composition and pH for chitinase production by the Alcaligenes xylosoxydans mutant EMS33 was carried out in the present study and the optimized medium composition and conditions were evaluated in a fermenter. The medium components screened initially using Plackett–Burman design were (NH₄)₂SO₄, MgSO₄ 7H₂O, KH₂PO₄, yeast extract, Tween 20 and chitin in shake flask experiments. The significant medium components identified by the Plackett–Burman method were MgSO₄ 7H₂O, Tween 20 and chitin. Central composite response surface methodology was applied to further optimize chitinase production. The optimized values of MgSO₄ 7H₂O, Tween 20, chitin and pH were found to be 0.6 g/l, 0.05 g/l, 11.5 g/l and 8.0, respectively. Chitinase and biomass production of Alcaligenes xylosoxydans EMS33, was studied in a 2-l fermenter containing (g/l): chitin, 11.5; yeast extract, 0.5; (NH₄)₂SO₄, 1; MgSO₄ 7H₂O, 0.6; KH₂PO₄, 1.36 and Tween 20, 0.05. The highest chitinase production was 54 units/ml at 60 h and pH 8.0 when the dissolved O₂ concentration was 60%, whereas the highest biomass production was achieved at 36 h and pH 7.5 without any dissolved O₂ control.     

Culture medium improvement for Isaria fumosorosea submerged conidia production

Submerged conidia and blastospores of the entomopathogenic fungus Isaria fumosorosea are produced in several liquid culture media. However, yields and the ecological fitness of these propagules vary according to culture media composition. In most culture media, hyphae, blastospores and submerged conidia are white but we found that in some media they develop a brown pigmentation. A dark pigment was extracted from brown-pigmented propagules and analyzed by IR spectroscopy. Adsorption bands coincided to those characteristics of melanins.Hadamard's matrices were employed in order to increase submerged conidia yields and brown pigmentation of fungal propagules. Media containing 20–30 mg/l of FeSO₄·7H₂O and 6–12 mg/l of CuSO₄·5H₂O allowed reaching the highest pigmentation (9 in a hedonic scale). A maximal concentration of submerged conidia of 1.0 (±1.2) × 10¹² cell/l was achieved after 120 h of liquid culture in a improved culture medium, containing 25 ml/l of Polyethylene glycol (MW 200), substance which enhanced submerged conidia production, reducing free mycelia or mycelial pellets formation. In the improved medium, it was estimated that more than 60% of produced biomass corresponded to submerged conidia and blastospores, while in other media, mycelia were the main product (80–97%).     

Crystallographic and mutational analyses of cystathionine β‐synthase in the H2S‐synthetic gene cluster in Lactobacillus plantarum

Cystathionine β‐synthase (CBS) catalyzes the formation of l ‐cystathionine from l ‐serine and l ‐homocysteine. The resulting l ‐cystathionine is decomposed into l ‐cysteine, ammonia, and α‐ketobutylic acid by cystathionine γ‐lyase (CGL). This reverse transsulfuration pathway, which is catalyzed by both enzymes, mainly occurs in eukaryotic cells. The eukaryotic CBS and CGL have recently been recognized as major physiological enzymes for the generation of hydrogen sulfide (H₂S). In some bacteria, including the plant‐derived lactic acid bacterium Lactobacillus plantarum, the CBS‐ and CGL‐encoding genes form a cluster in their genomes. Inactivation of these enzymes has been reported to suppress H₂S production in bacteria; interestingly, it has been shown that H₂S suppression increases their susceptibility to various antibiotics. In the present study, we characterized the enzymatic properties of the L. plantarum CBS, whose amino acid sequence displays a similarity with those of O‐acetyl‐l ‐serine sulfhydrylase (OASS) that catalyzes the generation of l ‐cysteine from O‐acetyl‐l ‐serine (l ‐OAS) and H₂S. The L. plantarum CBS shows l ‐OAS‐ and l ‐cysteine‐dependent CBS activities together with OASS activity. Especially, it catalyzes the formation of H₂S in the presence of l ‐cysteine and l ‐homocysteine, together with the formation of l ‐cystathionine. The high affinity toward l ‐cysteine as a first substrate and tendency to use l ‐homocysteine as a second substrate might be associated with its enzymatic ability to generate H₂S. Crystallographic and mutational analyses of CBS indicate that the Ala70 and Glu223 residues at the substrate binding pocket are important for the H₂S‐generating activity.     

Synthesis,physico-chemical studies of manganese(II), cobalt(II), nickel(II), copper(II) and zinc(II) complexes with some p-substituted acetophenone benzoylhydrazones and their antimicrobial activity

Complexes of the type [M(pabh)(H₂O)Cl], [M(pcbh)(H₂O)Cl] and [M(Hpabh)(H₂O)₂ (SO₄)] where, M = Mn(II), Co(II), Ni(II), Cu(II) and Zn(II); Hpabh = p-amino acetophenone benzoyl hydrazone and Hpcbh = p-chloro acetophenone benzoyl hydrazone have been synthesized and characterized with the help of elemental analyses, electrical conductance, magnetic susceptibility measurements, electronic, ESR and IR spectra, thermal (TGA & DTA) and X-ray diffraction studies. Co(II), Ni(II) and Cu(II) chloride complexes are square planar, whereas their sulfate complexes have spin-free octahedral geometry. ESR spectra of Cu(II) complexes with Hpabh are axial and suggest as the ground state. The ligand is bidentate bonding through >C = N ? and deprotonated enolate group in all the chloro complexes, whereas, >C = N and >C = O groups in all the sulfato complexes. Thermal studies (TGA & DTA) on [Cu(Hpabh)(H₂O)₂(SO₄)] indicate a multistep decomposition pattern, which are both exothermic and endothermic in nature. X-ray powder diffraction parameters for [Co(pabh)(H₂O)Cl] and [Ni(Hpabh)(H₂O)₂(SO₄)] correspond to tetragonal and orthorhombic crystal lattices, respectively. The ligands as well as their complexes show a significant antifungal and antibacterial activity. The metal complexes are more active than the ligand.     

l‐cysteine desulfhydrase‐related H2S production is involved in OsSE5‐promoted ammonium tolerance in roots of Oryza sativa

Previous studies revealed that rice heme oxygenase PHOTOPERIOD SENSITIVITY 5 (OsSE5) is involved in the regulation of tolerance to excess ammonium by enhancing antioxidant defence. In this study, the relationship between OsSE5 and hydrogen sulfide (H₂S), a well‐known signalling molecule, was investigated. Results showed that NH₄Cl triggered the induction of l ‐cysteine desulfhydrase (l ‐DES)‐related H₂S production in rice seedling roots. A H₂S donor not only alleviated the excess ammonium‐triggered inhibition of root growth but also reduced endogenous ammonium, both of which were aggravated by hypotaurine (HT, a H₂S scavenger) or dl ‐propargylglycine (PAG, a l ‐DES inhibitor). Nitrogen metabolism‐related enzymes were activated by H₂S, thus resulting in the induction of amino acid synthesis and total nitrogen content. Interestingly, the activity of l ‐DES, as well as the enzymes involved in nitrogen metabolism, was significantly increased in the OsSE5‐overexpression line (35S:OsSE5), whereas it impaired in the OsSE5‐knockdown mutant (OsSE5‐RNAi). The application of the HT/PAG or H₂S donor could differentially block or rescue NH₄Cl‐hyposensitivity or hypersensitivity phenotypes in 35S:OsSE5‐1 or OsSE5‐RNAi‐1 plants, with a concomitant modulation of nitrogen assimilation. Taken together, these results illustrated that H₂S function as an indispensable positive regulator participated in OsSE5‐promoted ammonium tolerance, in which nitrogen metabolism was facilitated.     

High rate biological treatment of sulfate-rich wastewater in an acetate-fed EGSB reactor

An expanded granular sludge bed reactor, inoculated with acclimated sulfidogenic granular sludge, was operated at 33 °C and fed with acetic acid as COD source and sulfate as electron acceptor. The bioreactor had a sulfate conversion efficiency of 80–90% at a high sulfate loading rate of 10.4 g SO₄ ^2--S/l.d after only 60 days of start-up. This was achieved by implementing a dual operational strategy. Firstly acetic acid was dosed near stoichiometry (COD over sulfur ratio = 2.0 to 2.2) which allowed almost complete sulfate removal. Secondly the pH in the bioreactor was kept slightly alkaline (7.9 ± 0.1) which limited the concentration of the inhibitory undissociated hydrogen sulfide H₂S (pK_a = 7). This allowed the acetotrophic sulfate reducing bacteria to predominate throughout the long term experiment. The limitations of the EGSB technology with respect to the sulfate conversion rate appeared to be related to the biomass wash-out and granule deterioration occurring at superficial upflow velocities above 10 m/h. Increasing the recirculation flow caused a drop in the sulfate reduction rate and efficiency, an increase of the suspended sludge fraction and a considerable loss of biomass into the effluent, yielding bare mainly inorganic granules. Elemental analysis revealed that a considerable amount of the granular sludge dry matter at the end of the experiment, at an upflow velocity of 20 m/h, consisted of calcium (32%), mainly in the form of carbonate deposits, while organic matter only represented 7%.     

A new medium for spore production of <Emphasis Type="Italic">Blakeslea trispora</Emphasis> using response surface methodology

Optimization of the medium components which enhance sporulation of the two mating types of the fungus Blakeslea trispora ATCC 14271 and ATCC 14272 (a heterothallic Zygomycota producing carotene) was achieved with the aid of response surface methodology (RSM). Glucose, corn steep liquor, yeast extract, and ammonium sulfate were investigated as carbon and nitrogen sources in a basal medium. RSM was adopted to optimize the medium in order to obtain a good growth of the fungus as a prerequisite for enhanced sporulation. In the second step, the basal medium was supplemented with different trace elements which significantly affect sporulation (i.e. CuSO₄·5H₂O, FeCl₃·6H₂O, Co(NO₃)₂·6H₂O, and MnCl₂·4H₂O). Central composite design proved to be valuable in optimizing a chemically defined solid medium for spore production of B. trispora. The composition of the new solid medium to enhance spore production by B. trispora (ATCC 14271) is as follows (per liter): 7.5 g glucose, 3.2 g corn steep liquor, 1.7 g yeast extract, 4.1 g ammonium sulfate, 6 mg CuSO₄·5H₂O, 276 mg FeCl₃·6H₂O, 2 mg Co(NO₃)₂·6H₂O, and 20 g agar (pH 6.0). Practical validation of this optimum medium gave spore number of 1.2 × 10⁸ spores/dish which is 77% higher than that produced in Potato Dextrose Agar (PDA). In the case of B. trispora (ATCC 14272) the new solid substrate for enhanced sporulation consists of (per l) 6.4 g glucose, 3.3 g corn steep liquor, 1.4 g yeast extract, 4.3 g ammonium sulfate, 264 mg CuSO₄·5H₂O, 485 mg FeCl₃·6H₂O, 223 mg MnCl₂^.4H₂O, and 20 g agar (pH 6.0). Spore numbers of 2 × 10⁷ spores/dish were obtained on the new medium by B. trispora (ATCC 14272), which is 95% higher than that produced on PDA. The results corroborated the validity and the effectiveness of the models. The new media considerably improved sporulation of both strains of B. trispora compared to the production of spores on PDA, which is the medium usually used for sporulation of the fungus.     

Microbial synthesis of 2H-labelled L-phenylalanine with different levels of isotopic enrichment by a facultative methylotrophic bacterium Brevibacterium methylicum with RuMP assimilation of carbon

Using the L-phenylalanine secreting strain of Gram-negative aerobic facultative methylotrophic bacteria Brevibacterium methylicum, assimilating methanol via the ribulose-5-monophosphate (RuMP) cycle of carbon assimilation, as an example, we have continued studies on the use of methylotrophic bacteria for the preparative microbial synthesis of amino acids labeled with stable isotopes, including deuterium (²H), suitable for biomedical applications and clinical diagnostics. Here we demonstrate the data on adaptation of the methylotrophic bacterium B. methylicum to the maximal concentration of deuterium in the growth medium with 98% (v/v) ²H₂O and 2% (v/v) [²H]MeOH, and biosynthesis of deuterium labeled L-phenylalanine with different levels of isotopic enrichment. The strain was adapted to ²H₂O by means of plating of initial cells on solid (2% agarose) minimal growth media M9 with an increasing gradient of ²H₂O concentration from 0, 24.5, 49.0, 73.5 up to 98% (v/v) ²H₂O and subsequent selection of individual colonies stable to the action of ²H₂O, which were capable to produce L-phenylalanine. L-phenylalanine was extracted from the growth medium with isopropanol followed by subsequent crystallization in ethanol (output 0.65 g/L). Using the developed method of microbial synthesis it is possible to obtain deuterated L-phenylalanine with different levels of isotopic enrichment, depending on concentration of ²H₂O in growth media, from 17% (the growth medium with 24.5% (v/v) ²H₂O) right up to 75% (the growth medium with 98% (v/v) ²H₂O) of deuterium as evidenced by results of the electron impact (EI) mass-spectrometry analysis of methyl ethers of N-dimethylamino(naphthalene)-5-sulfonyl chloride (dansyl) phenylalanine isolated from growth media under different experimental conditions.     

The New Basic Triple Salt Containing Magnesium Hydroxide

The quaternary system K₂SO₄–MgSO₄–Mg(OH)₂–H₂O and the associated systems (a) K₂SO₄–Mg(OH)₂–H₂O and (b) MgSO₄–Mg(OH)₂–H₂O were investigated at 100° Though isotherm (a) exhibited nothing new, isotherm (b) exhibited basic magnesium sulfate, MgSO₄ · 5Mg(OH)₂·3H₂O, as the solid phase. The solid phases of quaternary isotherm were the new basic triple salt K₂SO₄ · 2MgSO₄ · Mg(OH)₂ · 2H₂O, langbeinite, basic magnesium sulfate, kieserite and potassium sulfate.     

Determination of the best nutrient medium for the production of L-lactic acid from beet molasses a statistical approach

Optimization studies have been carried out for the production of L-lactic acid from the fermentation of beet molasses by Lactobacillus delbrueckii. A PLACKETT -BURMAN Design and a Central Composite Design have been used to determine the most suitable nutrient medium for obtaining a maximum cell concentration. A second-order polynomial empirical model relating both the cell and nutrient concentrations was formulated. The variables selected for the study were Yeast Extract, Peptone, Tween 80 (antifoam), MgSO₄ · 7H₂O, MnSO₄·4H₂O, FeSO₄ · 7H₂O and K₂HPO₄/KH₂PO₄. Among them, only Yeast Extract and Peptone were found to significantly affect the cell concentration. A maximum cell yield was found when the concentrations of Yeast Extract and Peptone were, respectively, 5.31 g/l and 5.08 g/l. All conclusions are restricted to the experimental range studied.     

Negative modulation of the GABAAρ1 receptor function by l‐cysteine

l ‐Cysteine is an endogenous sulfur‐containing amino acid with multiple and varied roles in the central nervous system, including neuroprotection and the maintenance of the redox balance. However, it was also suggested as an excitotoxic agent implicated in the pathogenesis of neurological disorders such as Parkinson′s and Alzheimer′s disease. l ‐Cysteine can modulate the activity of ionic channels, including voltage‐gated calcium channels and glutamatergic NMDA receptors, whereas its effects on GABAergic neurotransmission had not been studied before. In the present work, we analyzed the effects of l ‐cysteine on responses mediated by homomeric GABA_Aρ1 receptors, which are known for mediating tonic γ‐aminobutyric acid (GABA) responses in retinal neurons. GABA_Aρ1 receptors were expressed in Xenopus laevis oocytes and GABA‐evoked chloride currents recorded by two‐electrode voltage‐clamp in the presence or absence of l ‐cysteine. l ‐Cysteine antagonized GABA_Aρ1 receptor‐mediated responses; inhibition was dose‐dependent, reversible, voltage independent, and susceptible to GABA concentration. Concentration‐response curves for GABA were shifted to the right in the presence of l ‐cysteine without a substantial change in the maximal response. l ‐Cysteine inhibition was insensitive to chemical protection of the sulfhydryl groups of the ρ1 subunits by the irreversible alkylating agent N‐ethyl maleimide. Our results suggest that redox modulation is not involved during l ‐cysteine actions and that l ‐cysteine might be acting as a competitive antagonist of the GABA_Aρ1 receptors.

     

Statistical optimization of culture media for growth and lipid production of <Emphasis Type="Italic">Botryococcus braunii</Emphasis> LB572

Botryococcus braunii has an outstanding ability to produce lipid; however, it is a slow-growing green microalgae. Statistical optimization of growth media was performed to faster growth and to increase lipid concentration. The effect of media composition on the growth of B. braunii LB572 was examined using fractional factorial design and central composite design. The media components examined include sodium carbonate, potassium phosphate, calcium chloride, magnesium sulfate, ferric citrate, and sodium nitrate. The results indicated that potassium phosphate and magnesium sulfate were major impact factors. The optimum concentrations of potassium phosphate and magnesium sulphate were found to be 0.058 and 0.09 g/L, respectively, for growth and 0.083 and 0.1 g/L, respectively, for lipid production. These values were validated using bubble column photobioreactors. Lipid productivity increased to 0.19 g/L/day in lipid-optimized media, with an average biomass productivity of 0.296 g/L/day and 64.96% w/w. In growth-optimized media, lipid productivity was 0.18 g/L/day, with an average biomass productivity of 0.304 g/L/day and 59.56% w/w.     

Synthesis, characterization and X-ray structure of [Pd(SO4)(dppp)] · H2O, a catalyst for the CO-ethene copolymerization [dppp = 1,3-bis(diphenylphosphino)propane]

The title complex has been synthesized by first reacting dppp with Pd(AcO)₂ in acetone and then with NaHSO₄ in water. It has been characterized by IR, NMR and X-ray diffraction studies. The ³¹P NMR spectrum in DMSO shows a singlet at 16.62 ppm indicating that the two P atoms are equivalent and that the sulfate anion is weakly coordinating. The X-ray structure shows that the Pd atom is surrounded in an almost regular square planar environment by the two P atoms and by two O atoms of the sulfate anion and that the neutral complex is accompanied by a water molecule of crystallization. The Pd-P distances (2.217(1) and 2.233(1)) and the P-Pd-P angle (90.78(3)°) are close to those found in other complexes where the chelating diphosphine is the same. Also the Pd-O distances and the O-Pd-O bond angle are comparable to those of other relevant chelating ligands.In MeOH, the title complex, in combination with H₂SO₄, catalyses the CO-ethene copolymerization. The productivity reaches a maximum upon increasing the H₂SO₄/Pd ratio up to ca. 470 (7650 g of polyketone/g Pd h at 90 °C and 45 atm, CO/ethene 1/1). The viscosity of the polyketone passes through a maximum of 0.95 dL/g in m-cresol when the above ratio is ca. 100. It has been proposed that acid promotes the copolymerization process by destabilizing the β- and γ-chelates intermediates involved in chain growing process, thus favoring the insertion of the monomers. At relatively high acid concentration the lowering of productivity and viscosity suggests that the sulfate anion competes with the monomers for the coordination to the metal center.In H₂O-CH₃COOH as a solvent the productivity strongly depends on the H₂O/CH₃COOH ratio, as it passes through a maximum of 12 000 g polymer/g Pd h in the presence of ca. 60% of H₂O. The productivity is significantly lower than that found when the acetate and chloride analogues are used (27 000 g polyketone/g Pd · h). Thus, it is likely that the sulfate anion assists significantly the copolymerization process even though the concentration of CH₃COOH/CH₃COO⁻ is much preponderant.     

Effect of initial bacteria concentration on hydrogen gas production from cheese whey powder solution by thermophilic dark fermentation

Dark fermentative hydrogen gas production from cheese whey powder solution was realized at 55°C. Experiments were performed at different initial biomass concentrations varying between 0.48 and 2.86 g L^?1 with a constant initial substrate concentration of 26 ± 2 g total sugar (TS) per liter. The highest cumulative hydrogen evolution (633 mL, 30°C), hydrogen yield (1.56 mol H₂ mol^?1 glucose), and H₂ formation rate (3.45 mL h^?1) were obtained with 1.92 g L^?1 biomass concentration. The specific H₂ production rate decreased with increasing biomasss concentration from the highest value (47.7 mL g^?1 h^?1) at 0.48 g L^?1 biomass concentration. Total volatile fatty acid concentration varied beetween 10 and 14 g L^?1 with the highest level of 14.2 g L^?1 at biomass concentration of 0.48 g L^?1 and initial TS content of 28.4 g L^?1. The experimental data were correlated with the Gompertz equation and the constants were determined. The most suitable initial biomass to substrate ratio yielding the highest H₂ yield and formation rate was 0.082 g biomass per gram of TS. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 28: 931–936, 2012     

Biochemical and kinetic evaluation of lipase and biosurfactant assisted ex novo synthesis of microbial oil for biodiesel production by Yarrowia lipolytica utilizing chicken tallow

The present study explores the production of biodiesel, a sustainable replacement for depleting fossil fuel by utilizing microbial oil, which was procured from Yarrowia lipolytica employing chicken tallow as the carbon substrate. Chicken tallow, yeast extract, and MgSO₄·7H₂O were screened for biomass production through Plackett–Burman design. Further, Box–Behnken design analysis was performed, and the optimal concentration of the medium variables was found to be 20 g/L of chicken tallow, 7.0 g/L of yeast extract, and 0.45 g/L of MgSO₄·7H₂O.The various parameters viz., pH (6), temperature (30 °C), RPM (150), inoculum volume (5%, v/v), and C/N ratio (100) were optimized for maximal biomass and lipid yield, and lipid content. Nile red-stained cells were observed for intracellular lipid bodies using fluorescence microscopy, and its fluorescence intensity was measured bythe flow cytometer. The dimorphic transition and substrate assimilation of Y. lipolytica were analyzed using scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FT-IR). Batch kinetic studies revealed the concomitant synthesis of microbial lipid (4.16 g/L), lipase (43 U/mL), and biosurfactant (1.41 g/L). The GC-MS analysis of microbial oil presented the fatty acid profile as oleic acid (49.15%), palmitic acid (29.83%), stearic acid (11.43%), linoleic acid (3.83%), palmitoleic acid (3.77%), and myristic acid (1.32%).