A drug release-facilitating mechanism for human serum albumin in reverse micelles: requirement of a structural switch.

We measured the binding of a drug oxyphenylbutazone to the N-terminal peptic fragment of human serum albumin in 0.1 M Tris buffer, pH 8.0 (Kass = 2.4 10(5) M-1) and in reverse micelles of sodium bis(2-ethylhexyl) sulfosuccinate and buffer in isooctane (Kass. = 2.7 10(5) M-1). In the absence of any measured change in conformation of the fragment in reverse micelles, the peptide affinity for the drug is not decreased, in contrast to what is observed in intact albumin (HSA) under similar conditions. The interaction and the subsequent unfolding of HSA at the membrane-mimetic interface, constitutes thus a drug release-facilitating mechanism.     

Dynamics of a membrane-bound tryptophan analog in environments of varying hydration: a fluorescence approach

Tryptophan octyl ester (TOE) represents an important model for membrane-bound tryptophan residues. In this article, we have employed a combination of wavelength-selective fluorescence and time-resolved fluorescence spectroscopies to monitor the effect of varying degrees of hydration on the dynamics of TOE in reverse micellar environments formed by sodium bis(2-ethylhexyl) sulfosuccinate (AOT) in isooctane. Our results show that TOE exhibits red edge excitation shift (REES) and other wavelength-selective fluorescence effects when bound to reverse micelles of AOT. Fluorescence parameters such as intensity, emission maximum, anisotropy, and lifetime of TOE in reverse micelles of AOT depend on [water]/[surfactant] molar ratio (w (o)). These results are relevant and potentially useful for analyzing dynamics of proteins or peptides bound to membranes or membrane-mimetic media under conditions of changing hydration.     

Conformational analysis of bioactive peptides in reverse micelles as mimics of cell membrane environments

Summary Conformational preferences of secretin as a model peptide have been analyzed by CD and IR spectroscopy in reverse micelles of AOT/isooctane/water and compared to those in aqueous TFE, in SDS micelles and in DMPG vesicles. Among the systems examined, reverse micelles and phospholipid vesicles displayed almost identical conformational equilibria. Very high lipid-to-peptide ratios can be obtained in reverse micelles with full retention of optical transparency, even at millimolar peptide concentrations, thus indicating this system to be an interesting mimic of cell membrane environments for spectroscopic analysis of bioactive peptide conformations.Abbreviations TFE trifluoroethanol - SDS sodium dodecyl sulfate - DMPG dimyristoylphosphatidylglycerol - AOT bis(2-ethylhexyl)sulfosuccinate - CMC critical micellar concentration - VIP vasoactive intestinal peptide     

Fluorescence decay of sarcoplasmic reticulum ATPase. Ligand binding and hydration effects

Multifrequency phase-modulation lifetime data were acquired for sarcoplasmic reticulum Ca2+-ATPase. The intrinsic tryptophan fluorescence decay was complex and was fitted either with three exponentials or with bimodal Lorentzian distributions of lifetimes. Ca2+ binding to the high affinity sites in the ATPase produced an increase of 11% in the center of the main component of the bimodal distribution, shifting the lifetime from 4.04 to 4.50 ns. The effects of solvent on the ATPase were studied with the enzyme dissolved in reverse micelles of detergent bis-(2-ethylhexyl)sulfosuccinate in hexane. Increasing amounts of water up to a water/bis-(2-ethylhexyl)sulfosuccinate molar ratio of 4 produced marked changes in the fluorescence emission of the protein. Comparison of data obtained for micellar solutions of tryptophan or ATPase indicated that the tryptophan residues in the protein are protected from exposure to water. Correlation of water effects on emission intensity and lifetimes suggested that interaction with solvent may result in structural changes that cause a mixture of dynamic and static quenching of ATPase intrinsic fluorescence. Evidence for an effect of hydration on the structure of the active site was obtained by measurements of the fluorescence properties of fluorescein isothiocianate-labeled ATPase in reverse micelles.     

Lipase-catalyzed hydrolysis of olive oil in chemically-modified AOT/isooctane reverse micelles in a hollow fiber membrane reactor

The hydrolysis of olive oil catalyzed by Candida rugosa lipase in sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/isooctane and the synthetic sodium bis(2-ethylhexyl polyoxyethylene)sulfosuccinate (MAOT)/isooctane reverse micellar systems was investigated in a polysulfone hollow fiber membrane reactor with recycle of the reaction mixture. Lipase was completely retained by the membrane while olive oil and oleic acid freely passed through. The retention of reverse micelles depended on W ₀ (molar ratio of water to surfactant). At an olive oil concentration of 0.23 mol l^–1 the final substrate conversion in the MAOT micellar system was about 1.4 times of that in the AOT micellar system.     

Antigen-antibody binding in reverse micelles: interaction of monoclonal antibodies with a myelin basic protein peptide.

Reverse micelles can be used to mimic biological processes occurring at interfaces. To investigate antigen-antibody binding in a membrane-like environment, we first obtained Fab fragments from monoclonal antibodies against bovine myelin basic protein (MBP), an encephalitogenic protein. The binding of the fragments to a dansylated synthetic human MBP peptide gly(119)-gly(131), presenting sequence homologies with a viral protein, was measured in buffer and for the first time in reverse micelles of sodium bis(2-ethylhexyl) sulfosuccinate, in isooctane. Analysis of the fluorescence polarisation titration curves discloses that the Fab fragments in reverse micelles have retained the high affinity for the peptide found in buffer, and similar to that for intact MBP.     

Immobilized enzymes in reverse micelles: studies with gel-entrapped trypsin and alpha-chymotrypsin in AOT reverse micelles

Trypsin and alpha-chymotrypsin were immobilized by gelentrapment in polyacrylamide cross-linked with N,N(1)-methylenebisacrylamide. The immobilized enzymes are catalytically efficient in suspensions of reverse micelles formed in isooctane by bis(2-ethylhexyl) sodium sulfosuccinate (AOT) and water. Both entrapped enzymes are stable in reverse micellar suspension at room temperature and pH 8.2 for 3 days and lose 30-40% activity after 1 week. The enzymes obey Michaelis-Menten kinetics in the investigated concentration range with K(m) values higher than those in solution. Activity of the enzymes is independent of the water content of the micellar solution. No shift in pH optimum was observed for immobilized trypsin activity toward Nalpha-benzoyl-L-arginine ethyl ester. The utility of the procedure, which combines the advantage of enzyme immobilization and enzymology in reverse micelles, is illustrated by an example of peptide synthesis. In particular, peptide synthesis (e. g., Z--Ala--Phe--Leu--NH(2)) using water-insoluble substrate has been performed with gelentrapped alpha-chymotrypsin in reverse micellar suspension with the advantage of efficient enzyme recycling.     

Characterization of gramicidin A in an inverted micellar environment. A combined high-performance liquid chromatographic and spectroscopic study.

We have investigated the conformational adaptability of gramicidin A incorporated into reverse micelles of sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/isooctane/water, a so far unexplored "host" membrane-mimetic model system for this peptide. A high-performance liquid chromatographic strategy previously developed for the study of gramicidin in phospholipid vesicles and normal micelles [Ba?ó et al. (1989) FEBS Lett. 250, 67; Ba?ó et al. (1991) Biochemistry 30, 886] has been successfully extended to this system. The method has permitted the separation of peptide conformational species, namely, double-stranded dimers and monomers, and an accurate quantitation of their proportion in the inverted micellar environment. It has been demonstrated that, once inserted in the micelle, the double-stranded dimers undergo a dissociation process toward a thermodynamically stable monomeric configuration, whose monomerization rate constant (k1) is dependent in a bell-shaped manner on the water:surfactant mole ratio, w0. A tight correlation between k1 and the double-stranded dimer backbone conformation has been found from the comparison of chromatographic and circular dichroism data. In addition, fluorescence experiments indicate that the peptide tryptophans are in a rather nonpolar environment, with a restricted accessibility to water-soluble quenchers such as acrylamide.     

Solubilization and insertion into reverse micelles of the major myelin transmembrane proteolipid

The Folch-Pi proteolipid has been isolated from bovine white matter and characterized with respect to phospholipid and glycolipid composition. The protein-lipid complex has been solubilized in aqueous reverse micelles of di(2-ethylhexyl) sodium sulfosuccinate and isooctane. Solubilization of this otherwise water-insoluble proteolipid requires small amounts of water, the percent of solubility being maximum for a low molar ratio of water to surfactant (Wo = 5.6). Unlike hydrophilic proteins, the extent of incorporation into the micellar system is negligible at 50 mM surfactant and reaches 90Vo only at 300 mM. However, the conformation of the proteolipid in reverse micelles as studied by fluorescence emission spectroscopy and circular dichroism was not affected by variations of the surfactant concentration. These results are consistent with the peculiar properties of the aqueous environment of the proteolipid within the reverse micelles and may reflect the membrane-like character of these bio-assemblies.     

Membrane proteins in reverse micelles: myelin basic protein in a membrane-mimetic environment

The solubility, reactivity, and conformational dynamics of myelin basic protein (MBP) from bovine brain were studied in reverse micelles of sodium bis(2-ethylhexyl) sulfosuccinate (AOT)-isooctane and water. Such a membrane-mimetic system resembles the aqueous spaces of native myelin sheath in terms of physicochemical properties as reflected in the high affinity of MBP for interfacial bound water. This is marked by the unusual profile of the solubility curve of the protein in reverse micelles, which shows optimal solubility at a much lower molar ratio of water to surfactant ([ H2O]/[AOT] = w0) than that reported for other water-soluble proteins. The role of counterions and/or charged polar head groups in the solubilization process is revealed by comparison of the solubility of MBP in nonionic surfactant micellar solutions. Whereas MBP is unfolded in aqueous solutions, insertion into reverse micelles generates a more folded structure, characterized by the presence of 20% alpha-helix. This conformation is unaffected by variations in the water content of the system (in the 2.0-22.4 w0 range). The reactivity of epsilon-amino groups of lysine residues with aqueous solutions of o-phthalaldehyde demonstrates that segments of the peptide chain are accessible to water. Similar results were obtained with the sequence involved in heme binding. In contrast, the sole tryptophan residue, Trp-117, is shielded from the aqueous solvent, as indicated by lack of reaction with N-bromosuccinimide. The invariance of the wavelength maximum emission in the fluorescence spectra as a function of w0 is consistent with this result.(ABSTRACT TRUNCATED AT 250 WORDS)     

Conformational flexibility of domain III of annexin V at membrane/water interfaces

The conformational dynamics of domain III in annexin V bound to negatively charged phospholipid vesicles of 1-palmitoyl-2-oleoyl-sn-glycerophosphocholine and 1-palmitoyl-2-oleoyl-sn-glycerophosphoserine or incorporated into reverse micelles of water/sodium bis(2-ethylhexyl) sulfosuccinate in isooctane, used to mimic the phospholipid/water interface, was studied by steady-state and time-resolved fluorescence of its single tryptophan residue (W187). Upon interaction with sonicated phospholipid vesicles in the presence of calcium, or upon incorporation into reverse micelles without calcium, a progressive 12-14 nm red shift of the fluorescence emission spectrum of W187 is observed. The indole environment becomes therefore more polar than in the unbound protein. Three major lifetime populations describe the fluorescence intensity decays of W187 in both systems. A long-lived excited-state population characterizes the membrane-bound state of the protein. The existence of local conformers with different subnanosecond mobility is suggested by specific association between lifetimes and correlation times both for the protein in buffer and in interaction with the membrane surface. The interaction of the protein with the membrane surface preserves the existence of a rapid unhindered rotational motion, which is coupled with all three lifetimes. The longest lifetime is coupled to restricted motions in subnanosecond and nanosecond time scales. The overall amplitude of rotation of the indole ring is increased in the membrane-bound conformation of the protein. In reverse micelles, the local dynamics reported by W187 is also considerably increased whereas the overall folding of the protein remains unaffected. The same conformational change of domain III can therefore be provoked by different conditions: calcium binding at high concentration, mild acidic pH [Sopkova, J., Vincent, M., Takahashi, M., Lewit-Bentley, A. , and Gallay, J. (1998) Biochemistry 37, 11962-11970] and the interaction of the protein with the membrane surface. The high flexibility of domain III in the membrane-bound protein suggests that this domain may not be crucial for the interaction of the protein with the membrane, in contrast with previous models. Our data are compatible with atomic force microscopy results which suggest that domain III of annexin V does not interact strongly with the membrane surface [Reviakine, I., Bergma-Schutter, W., and Brisson, A. (1998) J. Struct. Biol. 121, 356-361].     

Ethylene glycol and the thermostability of trypsin in a reverse micelle system

The influence of ethylene glycol (EG) on the kinetics of hydrolysis of N-alpha-benzoyl-L-arginine ethyl ether catalyzed by trypsin encapsulated in sodium bis-(2-ethylhexyl)sulfosuccinate (AOT)-based reverse micelles was studied at different temperatures. Ethylene glycol was shown to shift the range of the trypsin activity in the reverse micelles towards higher temperatures. Infrared spectroscopy showed a stabilizing effect of EG on the secondary structure of the protein in the system of reverse micelles. Electron spin resonance spectroscopy showed that the solubilized protein affected the interactions of EG with the polar head groups of AOT and altered the rigidity of the micellar matrix. The results indicate that EG increases the thermostability of the solubilized enzyme in microemulsion media by two mechanisms.     

Kinetic Studies on the Interaction of Ferricytochrome c with Anionic Surfactants

The kinetics of absorbance and fluorescence changes of cytochrome c as induced by an aqueous solution of the anionic surfactant sodium dodecyl sulfate (SDS) or sodium bis(2-ethylhexyl)sulfosuccinate (AOT) are studied. The results are compared with far-UV circular dichroism (CD) spectra. Both surfactants cause similar alterations in the secondary structure of cytochrome c, while their influence on the heme environment of cytochrome c is different. In the presence of AOT below and above critical micellar concentration a conversion of the low-spin native cytochrome c to a denatured low-spin protein not having methionine ligand takes place. In the presence of SDS micelles conversion of the native protein to a denatured mixed-spin form occurs. The changes in the heme group induced by both surfactants occur independently of the alterations in tertiary structure.     

Structural parameters of the myelin transmembrane proteolipid in reverse micelles.

The Folch-Pi proteolipid is the most abundant structural protein from the central nervous system myelin. This protein-lipid complex, normally insoluble in water, requires only a small amount of water for solubilization in reverse micelles of sodium bis (2-ethylhexyl) sulfosuccinate (AOT) in isooctane. The characterization of the proteolipid-free and proteolipid-containing micelles was undertaken by light scattering and fluorescence recovery after fringe pattern photobleaching (FRAPP) experiments. Quasi elastic light scattering (QELS) was carried out at a high (200 mM) AOT concentration, at low water-to-surfactant mole ratio (Wo = 7) and at increasing protein occupancy. Two apparent hydrodynamic radii, differing tenfold in size, were obtained from correlation functions. The smaller one (RaH = 5.2 nm) remains constant and corresponds to that measured for protein-free micelles. The larger one increases linearly with protein concentration. In contrast, FRAPP measurements of self-diffusion coefficients were found unaffected by the proteolipid concentration. Accordingly, they have been performed at constant protein/surfactant mole ratios. The equivalent RH, extrapolated to zero AOT concentration for protein-free reverse micelles (2.9 nm) and in the presence of the proteolipid (4.6 nm), do not reveal the mode of organization previously suggested by QELS measurements. The complex picture emerging from this work represents a first step in the characterization of an integral membrane protein in reverse micelles.     

Conformational changes of beta-lactoglobulin in sodium bis(2-ethylhexyl) sulfosuccinate reverse micelles. A fluorescence and CD study.

The effect of beta-lactoglobulin encapsulation in sodium bis(2-ethylhexyl) sulfosuccinate reverse micelles on the environment of protein and on Trp was analysed at different water contents (omega0). CD data underlined the distortion of the beta-sheet and a less constrained tertiary structure as the omega0 increased, in agreement with a concomitant red shift and a decrease in the signal intensity obtained in steady-state fluorescence measurements. Fluorescence lifetimes, evaluated by biexponential analysis, were tau1 = 1.28 ns and tau2 = 3.36 ns in neutral water. In reverse micelles, decay-associated spectra indicated the occurrence of important environmental changes associated with omega0. Bimolecular fluorescence quenching by CCl4 and acrylamide was employed to analyse alterations in the accessibility of the two Trp residues in beta-lactoglobulin, induced by changes in omega0. The average bimolecular quenching constant was found not to depend on omega0, confirming the insolubility of this quencher in the aqueous interface, while increases with omega0. The drastic decrease with omega0 of kq, associated with the longest lifetime kq2(CCl4), comparatively to the increase of kq2(acrylamide), emphasizes the location of beta-lactoglobulin in the aqueous interfacial region especially at omega0> or = 10. The fact that (omega0 = 30) > kq2(acrylamide) (water) also confirms the important conformational changes of encapsulated beta-lactoglobulin.     

Characterization of serotonin in protein and membrane mimetic environments: a spectroscopic study

As a first step toward using the photophysical properties of serotonin to probe its interactions with biological target sites, we have examined its interactions with human serum albumin (HSA), chosen as a surrogate for the actual receptor proteins in physiological systems, and with sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/heptane/water reverse micelles, chosen as a biomembrane mimetic environment for the transmembrane portion of the receptor protein. Although the emission maximum of serotonin is relatively insensitive to the polarity of the local environment, which is attributed to lack of solvent dipolar reorientation of the 5-hydroxyindole chromophore, the fluorescence anisotropy (r) served as a useful and sensitive parameter from which the binding constants (K) and Gibbs energy changes (deltaG) were estimated for serotonin-HSA and serotonin-AOT reverse micellar interactions. Fluorescence-decay studies of serotonin show double-exponential kinetics in homogeneous aqueous solvent due to the structural heterogeneity arising from different rotamers of serotonin. In contrast, upon binding to HSA, a single-exponential fluorescence-decay profile was observed indicating the occurrence of a single structural species of serotonin in the protein environment. Furthermore, far-UV-circular-dichroism (CD) spectroscopic data indicate that the secondary structural features of HSA remain essentially intact after binding to serotonin. This preliminary research can be expected to open the door to extensive future studies on interactions of serotonin with relevant target proteins and associated cell membranes involved in its diverse physiological functions.     

Improvement in extraction and catalytic activity of Mucor javanicus lipase by modification of AOT reverse micelle

Reverse micelles are formed in apolar solvents by spontaneous aggregation of surfactants. Surfactant sodium bis (2-ethylhexyl) sulfosuccinate (AOT) is most often used for the reverse micellar extraction of enzymes. However, the inactivation of enzyme due to strong interaction with AOT molecules is a severe problem. To overcome this problem, the AOT/water/isooctane reverse micellar system was modified by adding short chain polyethylene glycol 400 (PEG 400). The modified AOT reverse micellar system was used to extract Mucor javanicus lipase from the aqueous phase to the reverse micellar phase. The extraction efficiency (E) increased with the increase in PEG 400 addition and the maximum E in PEG 400 modified system was twofold higher than that in the PEG 400-free system. Upon addition of PEG 400, the water activity (a(w)) of aqueous phase decreased, whereas a(w) of reverse micellar phase increased. The circular dichroism spectroscopy analysis revealed that PEG 400 changes the secondary and tertiary structure of lipase. The maximum specific activity of lipase extracted in PEG 400-modified reverse micellar system was threefold higher than that in the PEG-free system.     

Downstream processing of soy hull peroxidase employing reverse micellar extraction

Phase transfer studies were conducted to evaluate the solubilization of soy hull peroxidase (SHP) in reverse micelles formed in isooctane/butanol/hexanol using the cationic surfactant cetyltrimethylammonium bromide (CTAB). The effect of various parameters such as pH, ionic strength, surfactant concentration of the initial aqueous phase for forward extraction and buffer pH, type and concentration of salt, concentration of isopropyl alcohol and volume ratio for back extraction was studied to improve the efficiency of reverse micellar extraction. The active SHP was recovered after a complete cycle of forward and back extraction. A forward extraction efficiency of 100%, back extraction efficiency of 36%, overall activity recovery of 90% and purification fold of 4.72 were obtained under optimised conditions. Anionic surfactant sodium bis (2-ethylhexyl) sulfosuccinate (AOT) did not yield good results under the conditions studied. The phase transfer of soy hull peroxidase was found to be controlled by electrostatic and hydrophobic interactions during forward and back extraction respectively.     

Spectroscopic properties of horse liver alcohol dehydrogenase in reversed micellar solutions

Catalytic and spectroscopic properties of alcohol dehydrogenase from horse liver, incorporated in reversed micellar media, have been studied. Two different reversed micellar systems have been used, one containing an anionic [sodium bis(2-ethylhexyl)sulfosuccinate, AOT], the other containing a cationic (cetyltrimethylammonium bromide, CTAB) surfactant. With 1-hexanol as substrate the turnover number of the enzyme in AOT-reversed micelles is strongly dependent on the water content of the system. At low wo ([H2O]/[surfactant]) (wo less than 20) no enzymatic activity can be detected whereas at high wo (wo = 40) the turnover is only slightly lower than in aqueous solution. In CTAB-reversed micelles the dependence of the turnover number on wo is much less. The enzymatic activity is in this case significantly lower than in aqueous solution and increases only slightly with an increasing water content of the reversed micelles. Possible interactions of the protein with the surfactant interfaces in the reversed micellar media were studied via circular dichroism and fluorescence measurements. From the circular dichroism of the protein backbone it is observed that the protein secondary structure is not significantly affected upon incorporation in the reversed micelles since the far-ultraviolet spectrum is not altered. Results from time-resolved fluorescence anisotropy experiments indicate that, especially in AOT-reversed micelles, interactions between the protein and the surfactant interface are largely electrostatic in nature, as evident from the dependence on the pH of the buffer used. In CTAB-reversed micellar solutions such interactions appear to be much less pronounced than in AOT.     

Triplet-state kinetics of Zn-porphyrin cytochrome c in micellar media. Measurement of intermicellar exchange rates

The interactions of protein molecules with surfactant assemblies in aqueous and hydrocarbon media have been studied via the triplet-state kinetics of Zn-porphyrin cytochrome c in solutions containing an anionic [sodium bis(2-ethylhexyl)sulfosuccinate, AOT] or a cationic (cetyltrimethylammonium bromide, CTAB) surfactant. In aqueous solution, the observed triplet state decay is single exponential with a lifetime of 8 ms. In aqueous solutions of AOT and in AOT-reversed micellar solutions, biexponential triplet state decays were observed, indicating that interactions between the surfactant and the protein occur, resulting in a change in protein conformation near the porphyrin ring. In CTAB-reversed micellar solutions, quenching of the Zn-porphyrin cytochrome c triplet state by ferricyanide and methyl viologen was studied. Because the quenching is exchange-limited under the conditions used, the exchange rate constants for the water pools can be obtained from these experiments. The observed exchange rate constants are in the range (1-5) x 10(7) M-1 S-1, depending on the water content of the reversed micelles and on the type of quencher used. These values are three orders of magnitude lower than the calculated collision rate of the reversed micelles.