Synthesis and degradation test of hyaluronic acid hydrogels

Hyaluronic acid (HA) hydrogels prepared with three different crosslinking reagents were assessed by in vitro and in vivo degradation tests for various tissue engineering applications. Adipic acid dihydrazide grafted HA (HA-ADH) was synthesized and used for the preparation of methacrylated HA (HA-MA) with methacrylic anhydride and thiolated HA (HA-SH) with Traut's reagent (imminothiolane). (1)H NMR analysis showed that the degrees of HA-ADH, HA-MA, and HA-SH modification were 69, 29, and 56 mol%, respectively. HA-ADH hydrogel was prepared by the crosslinking with bis(sulfosuccinimidyl) suberate (BS(3)), HA-MA hydrogel with dithiothreitol (DTT) by Michael addition, and HA-SH hydrogel with sodium tetrathionate by disulfide bond formation. According to in vitro degradation tests, HA-SH hydrogel was degraded very fast, compared to HA-ADH and HA-MA hydrogels. HA-ADH hydrogel was degraded slightly faster than HA-MA hydrogel. Based on these results, HA-MA hydrogels and HA-SH hydrogels were implanted in the back of SD rats and their degradation was assessed according to the pre-determined time schedule. As expected from the in vitro degradation test results, HA-SH hydrogel was in vivo degraded completely only in 2 weeks, whereas HA-MA hydrogels were degraded only partially even in 29 days. The degradation rate of HA hydrogels were thought to be controlled by changing the crosslinking reagents and the functional group of HA derivatives. In addition, the state of HA hydrogel was another factor in controlling the degradation rate. Dried HA hydrogel at 37 degrees C for a day resulted in relatively slow degradation compared to the bulk HA hydrogel. There was no adverse effect during the in vivo tests.     

Synthesis and biological evaluation of a cross-linked hyaluronan-mitomycin C hydrogel

A cross-linked hyaluronan (HA) hydrogel that contained a covalently bound derivative of the anti-proliferative drug mitomycin C (MMC) was synthesized and evaluated in vitro and in vivo. The HA-MMC hydrogel was prepared by coupling MMC-aziridinyl-N-acrylate with thiol-modified HA followed by cross-linking with poly(ethylene glycol) diacrylate (PEGDA). MMC was released from 0.5% and 2.0% MMC films by hydrolysis in proportion to the MMC loading. When incubated in vitro with human T31 tracheal scar fibroblasts, 0.5% MMC films inhibited proliferation, whereas 2.0% MMC films were cytotoxic. When implanted in vivo into a rat peritoneal cavity, neither 0.5% nor 2.0% HA-MMC films elicited a severe peritoneal fluid leukocyte response. Importantly, MMC reduced the thickness of fibrous tissue formed surrounding the implanted films. Thus, cross-linked HA-MMC films have strong potential as anti-fibrotic barriers for the prevention of post-surgical adhesions.     

Synthesis of hyaluronan haloacetates and biology of novel cross-linker-free synthetic extracellular matrix hydrogels

Hyaluronan (HA) derivatives containing thiol-reactive electrophilic esters were prepared to react with thiol-modified macromolecules to give cross-linker-free hydrogels. Specifically, HA was converted to two haloacetate derivatives, HA bromoacetate (HABA) and HA iodoacetate (HAIA). In cytotoxicity assays, these reactive macromolecules predictably induced cell death in a dose-dependent manner. Cross-linker-free synthetic extracellular matrix (sECM) hydrogels were prepared by thiol alkylation using HAIA and HABA as polyvalent electrophiles and thiol-modified HA (CMHA-S) with or without thiol-modified gelatin (Gtn-DTPH) as polyvalent nucleophiles. When primary human fibroblasts were seeded on the surface of the sECMs containing only the electrophilic HA haloacetate and nucleophilic CMHA-S components, no significant cytoadherence was observed. Cell attachment and viability was 17% (HABA) to 30% (HAIA) lower on HA haloacetate cross-linked hydrogels than on CMHA-S that had been oxidatively cross-linked via disulfide-bonds. In contrast, sECMs that included Gtn-DTPH allowed fibroblasts to attach, spread, and proliferate. Taken together, the HA haloacetates are attractive candidates for producing cross-linker-free sECM biomaterials that can function either as anti-adhesive barriers or as cytoadhesive sECMs for cell culture in pseudo-3-D.     

New water-soluble phosphines as reductants of peptide and protein disulfide bonds: reactivity and membrane permeability

Tris(2-carboxyethyl)phosphine (TCEP) is a widely used substitute for dithiothreitol (DTT) in the reduction of disulfide bonds in biochemical systems. Although TCEP has been recently shown to be a substrate of the flavin-dependent sulfhydryl oxidases, there is little quantitative information concerning the rate by which TCEP reduces other peptidic disulfide bonds. In this study, mono-, di-, and trimethyl ester analogues of TCEP were synthesized to evaluate the role of carboxylate anions in the reduction mechanism, and to expand the range of phosphine reductants. The effectiveness of all four phosphines relative to DTT has been determined using model disulfides, including a fluorescent disulfide-containing peptide (H(3)N(+)-VTWCGACKM-NH(2)), and with protein disulfide bonds in thioredoxin and sulfhydryl oxidase. Mono-, di-, and trimethyl esters exhibit phosphorus pK values of 6.8, 5.8, and 4.7, respectively, extending their reactivity with the model peptide to correspondingly lower pH values relative to that of TCEP (pK = 7.6). At pH 5.0, the order of reactivity is as follows: trimethyl- > dimethyl- > monomethyl- > TCEP > DTT; tmTCEP is 35-fold more reactive than TCEP, and DTT is essentially unreactive. Esterification also increases lipophilicity, allowing tmTCEP to penetrate phospholipid bilayers rapidly (>30-fold faster than DTT), whereas the parent TCEP is impermeant. Although more reactive than DTT toward small-molecule disulfides at pH 7.5, all phosphines are markedly less reactive toward protein disulfides at this pH. Molecular modeling suggests that the nucleophilic phosphorus of TCEP is more sterically crowded than the thiolate of DTT, contributing to the lower reactivity of the phosphine with protein disulfides. In sum, these data suggest that there is considerable scope for the synthesis of phosphine analogues tailored for specific applications in biological systems.     

The disulfide linkage and the free sulfhydryl accessibility of acyl-coenzyme A:cholesterol acyltransferase 1 as studied by using mPEG5000-maleimide

Acyl-coenzyme A:cholesterol acyltransferase (ACAT) is a membrane protein located in the endoplasmic reticulum (ER). It plays important roles in cellular cholesterol homeostasis. Human ACAT1 (hACAT1) contains nine cysteines (C). To quantify and map its disulfide linkage, we performed thiol-specific modifications by mPEG(5000)-maleimide (PEG-mal) and iodoacetamide (IA) under denatured condition, using extracts that contain wild-type or various single C to A mutant hACAT1s. With the wild-type enzyme, seven Cs could be modified before dithiothreitol (DTT) treatment; nine Cs could be modified after DTT treatment. With the C528A or the C546A enzyme, all eight Cs could be modified before or after DTT treatment. With all other remaining single C to A mutant enzymes, six Cs could be modified before DTT treatment, and eight Cs could be modified after DTT treatment. We next performed Lys-C protease digestion on hACAT1 with a hemagglutinin (HA) tag at the C-terminus. The digests were treated with or without DTT and analyzed by SDS-PAGE and Western blotting. The two predicted C-terminal fragments (K496-K531 and N532-F550-HA tag) were trapped as a single peptide band, but only when the digests were treated without DTT. Thus, C528 and C546 near the enzyme's C-terminus form a disulfide. PEG-mal is impermeable to ER membranes. We used PEG-mal to map the localizations of the seven free sulfhydryls and the disulfide bond of hACAT1 present in microsomal vesicles. The results show that C92 is located on the cytoplasmic side of the ER membrane and the disulfide is located in the ER lumen, while all other free Cs are located within the hydrophobic region(s) of the enzyme.     

Synthesis and characterization of novel thiol-reactive poly(ethylene glycol) cross-linkers for extracellular-matrix-mimetic biomaterials

Synthetic extracellular matrix hydrogels can be used for three-dimensional cell culture, wound repair, and tissue engineering. Using the bifunctional electrophile poly(ethylene glycol) diacrylate (PEGDA), thiol-modified glycosaminoglycans and polypeptides can be cross-linked into biocompatible materials in the presence of cells or tissues. However, the rate of in situ cross-linking with PEGDA under physiological conditions may occur too slowly for clinical applications requiring a fast-curing preparation. To explore a wider range of cross-linking time courses, five homo-bifunctional PEG derivatives were synthesized and examined as cross-linking agents for thiol-modified derivatives of hyaluronan (HA). Thiol reaction rate constants were measured over a pH range of 7.4 to 8.6. The order of reactivity for the functional groups used was determined to be maleimide > iodoacetate > bromoacetate > iodoacetamide > acrylate > bromoacetamide, with rates increasing exponentially with increasing pH. The range of gelation times at physiological pH varied from less than 1 min to over 2 h. Addition of the cross-linkers to cell culture medium showed minimal cytotoxicity toward primary human dermal fibroblasts at concentrations anticipated during in situ cross-linking. Moreover, hydrogels prepared from thiol-modified gelatin and thiol-modified HA were biocompatible and supported attachment and proliferation of fibroblasts and hepatocytes.     

Anti-calcification of bovine pericardium for bioprosthetic heart valves after surface modification with hyaluronic acid derivatives

Surface modification of glutaraldehyde fixed bovine pericardium (GFBP) was successfully carried out with hyaluronic acid (HA) derivatives. At first, HA was chemically modified with adipic dihydrazide (ADH) to introduce hydrazide functional group into the carboxyl group of HA backbone. Then, GFBP was surface modified by grafting HA-ADH to the free aldehyde groups on the tissue and the subsequent HA-ADH hydrogel coating. HA-ADH hydrogels could be prepared through selective crosslinking at low pH between hydrazide groups of HA-ADH and crosslinkers containing succinimmidyl moieties with minimized protein denaturation. When HA-ADH hydrogels were prepared at low pH of 4.8 in the presence of erythropoietin (EPO) as a model protein, EPO release was continued up to 85% of total amount of loaded EPO for 4 days. To the contrary, only 30% of EPO was released from HA-ADH hydrogels prepared at pH=7.4, which might be due to the denaturation of EPO during the crosslinking reaction. Because the carboxyl groups on the glucuronic acid residues are recognition sites for HA degradation by hyaluronidase, the HA-ADH hydrogels degraded more slowly than HA hydrogels prepared by the crosslinking reaction of divinyl sulfone with hydroxyl groups of HA. Following a two-week subcutaneous implantation in osteopontin-null mice, clinically significant levels of calcification were observed for the positive controls without any surface modification. However, the calcification of surface modified GFBP with HA-ADH and HA-ADH hydrogels was drastically reduced by more than 85% of the positive controls. The anti-calcification effect of HA surface modification was also confirmed by microscopic analysis of explan ted tissue after staining with Alizarin Red S for calcium, which followed the trend as observed with calcium quantification.     

Manipulating disulfide bond formation and protein folding in the endoplasmic reticulum.

Addition of the reducing agent dithiothreitol (DTT) to the medium of living cells prevented disulfide bond formation in newly synthesized influenza hemagglutinin (HA0) and induced the reduction of already oxidized HA0 inside the ER. The reduced HA0 did not trimerize or leave the ER. When DTT was washed out, HA0 was rapidly oxidized, correctly folded, trimerized and transported to the Golgi complex. We concluded that protein folding and the redox conditions in the ER can be readily manipulated by addition of DTT without affecting most other cellular functions, that the reduced influenza HA0 remains largely unfolded, and that folding events that normally take place on the nascent HA0 chains can be delayed and induced post-translationally without loss in efficiency.     

The CXXC motif at the N terminus of an alpha-helical peptide

An active site containing a CXXC motif is always found in the thiol-disulphide oxidoreductase superfamily. A survey of crystal structures revealed that the CXXC motif had a very high local propensity (26.3 +/- 6.2) for the N termini of alpha-helices. A helical peptide with the sequence CAAC at the N terminus was synthesized to examine the helix-stabilizing capacity of the CXXC motif. Circular dichroism was used to confirm the helical nature of the peptide and study behavior under titration with various species. With DTT, a redox potential of E(o) = -230 mV was measured, indicating that the isolated peptide is reducing in nature and similar to native human thioredoxin. The pK(a) values of the individual Cys residues could not be separated in the titration of the reduced state, giving a single transition with an apparent pK(a) of 6.74 (+/-0.06). In the oxidized state, the N-terminal pK(a) is 5.96 (+/-0.05). Analysis of results with the modified helix-coil theory indicated that the disulfide bond stabilized the alpha-helical structure by 0.5 kcal/mol. Reducing the disulfide destabilizes the helix by 0.9 kcal/mol.     

Disulfide cross-linked polymer capsules: en route to biodeconstructible systems

Hydrogen-bonded multilayer thin films were constructed using poly(vinylpyrrolidone) and poly(methacrylic acid) functionalized with cysteamine. The resulting films included thiol moieties that were cross-linked to render the films stable at physiological pH. Film buildup was followed using quartz crystal microgravimetry, which was also used to demonstrate the improved stability imparted by reacting the thiol moieties to form disulfide bonds. Films without disulfide bonds were readily deconstructed at physiological pH, while those with disulfide bonds were swollen upon exposure to this pH (7) but remained intact. Addition of a common thiol-disulfide exchange reagent, dithiothreitol (DTT) at pH 7 led to disassembly of the multilayer films. The films were also prepared on colloidal substrates (as demonstrated using confocal microscopy) and were used to retain a model drug (fluorescently labeled transferrin) and release this molecule when triggered by the addition of DTT. This approach has potential for the in vivo applications of hollow capsules, as thiol-disulfide exchange leading to deconstruction of the capsules can occur with the assistance of intracellular proteins.     

Facile synthesis and characterization of disulfide-cross-linked hyaluronic acid hydrogels for protein delivery and cell encapsulation

Injectable hyaluronic acid (HA) hydrogels cross-linked via disulfide bond are synthesized using a thiol-disulfide exchange reaction. The production of small-molecule reaction product, pyridine-2-thione, allows the hydrogel formation process to be monitored quantitatively in real-time by UV spectroscopy. Rheological tests show that the hydrogels formed within minutes at 37 °C. Mechanical properties and equilibrium swelling degree of the hydrogels can be controlled by varying the ratio of HA pyridyl disulfide and macro-cross-linker PEG-dithiol. Degradation of the hydrogels was achieved both enzymatically and chemically by disulfide reduction with distinctly different kinetics and profiles. In the presence of hyaluronidase, hydrogel mass loss over time was linear and the degradation was faster at higher enzyme concentrations, suggesting surface-limited degradation. The kinetics of hydrogel erosion by glutathione was not linear, nor did the erosion rate correlate linearly with glutathione concentration, suggesting a bulk erosion mechanism. A cysteine-containing chemokine, stromal cell-derived factor 1α, was successfully encapsulated in the hydrogel and released in vitro without chemical alteration. Several different cell types, including fibroblasts, endothelial cells, and mesenchymal stem cells, were successfully encapsulated in the hydrogels with high cell viability during and after the encapsulation process. Substantial cell viability in the hydrogels was maintained up to 7 days in culture despite the lack of adhesion between the HA matrix and the cells. The facile synthesis of disulfide-cross-linked, dual-responsive degradable HA hydrogels may enable further development of bioactive matrices potentially suitable for tissue engineering and drug delivery applications.     

Enzymatic degradation of hyaluronan hydrogels with different capacity for in situ bio‐mineralization

In situ cross‐linked hyaluronan (HA) hydrogels with different capacities for biomineralization were prepared and their enzymatic degradation was monitored. Covalent incorporation of bisphosphonates (BPs) into HA hydrogel results in the increased stiffness of the hydrogel in comparison with the unmodified HA hydrogel of the same cross‐linking density. The rate of enzymatic degradation of HABP hydrogel was significantly lower than the rate of degradation of control HA hydrogel in vitro. This effect is observed only in the presence of calcium ions that strongly bind to the matrix‐anchored BP groups and promote further mineralization of the matrix. The degradation of the hydrogels was followed by noninvasive fluorescence measurements enabled after mild and chemoselective labeling of cross‐linkable HA derivatives with a fluorescent tag.     

Essential disulfide and sulfhydryl groups for organic cation transport in renal brush-border membranes

The disulfide reducing agent, dithiothreitol (DTT) and the sulfhydryl-modifying reagents p-chloromercuribenzenesulfonic acid and N-ethylmaleimide (NEM) were employed to assess the role of disulfide and sulfhydryl groups in organic cation transport. The transport of N1-[3H]methylnicotinamide (NMN), a prototypic organic cation, was examined employing brush-border membrane vesicles isolated from the outer cortex of canine kidneys. DTT inhibited NMN transport reversibly with an IC50 of 250 microM/mg of protein. 5 mM NMN protected against DTT inactivation. The specificity of substrate protection was demonstrated by showing that D-glucose had no effect on the DTT inactivation of NMN transport and conversely that NMN had no effect on the DTT inactivation of D-glucose transport. Disulfide bonds reduced by DTT could be reoxidized by washing with excess buffer or by addition of 0.02% H2O2 thereby restoring NMN transport. p-Chloromercuribenzenesulfonic acid reversibly inactivated NMN transport with an IC50 of 25 microM/mg of protein. 5mM NMN protected against inactivation. NEM irreversibly inactivated transport with an IC50 of 250 microM/mg of protein. The rate of NMN inactivation by NEM followed pseudo-first order reaction kinetics. A replot of the data gave a linear relationship between the apparent rate constants and the NEM concentration with a slope of 1.3. The data are consistent with a simple bimolecular reaction mechanism and imply that one molecule of NEM inactivates 1 sulfhydryl group/active transport unit. The presence of 5 mM NMN affected the rate of NEM (2.5 mM) inactivation: the t1/2 values for inactivation in the presence and absence of substrate were 7.3 and 2.0 min, respectively. The results demonstrate an essential requirement for disulfide and sulfhydryl groups.     

Evidence for Disulfide Bonds in Membrane-Bound and Solubilized Opioid Receptors

The effects of pretreatment with dithiothreitol (DTT) on opioid binding activities of membrane-bound and digitonin-solubilized opioid receptors from bovine adrenal medulla were studied. Pretreatment of membranes with DTT or mercaptoethanol inhibited [3H]diprenorphine binding by reducing the number of binding sites. The inhibitory action of DTT was time and dose dependent. The binding of [3H]D-Ala2-D-Leu5-enkephalin was also inhibited by DTT pretreatment. Pretreatment of digitonin-solubilized binding sites with DTT also reduced the number of [3H]diprenorphine binding sites. The action of DTT was diminished by preincubating the DTT solution with H2O2. [3H]Diprenorphine protected the opioid binding sites from the inhibitory action of DTT. The present results provide evidence that disulfide bonds are implicated in opioid binding activity of the opioid receptor system.     

Fabrication of hyaluronic acid hydrogel beads for cell encapsulation

Hyaluronic acid (HA) hydrogel beads were prepared by photopolymerization of methacrylated HA and N-vinylpyrrolidone using alginate as a temporal spherical mold. Various fabrication conditions for preparing the hydrogel beads, such as the concentration of methacrylated HA and UV irradiation time, were optimized to control swelling properties and enzymatic degradability. A new concept for cell encapsulation is proposed in this paper. Viable cells were directly injected into the hydrogel beads using a microinjection technique. When bovine articular chondrocytes were injected into HA hydrogel beads and cultivated for 1 week, the cells could proliferate well within the HA beads. HA hydrogel beads could be potentially used as injectable cell delivery vehicles for regenerating tissue defects.     

Membrane glycoprotein folding, oligomerization and intracellular transport: effects of dithiothreitol in living cells.

Using influenza hemagglutinin (HA0) and vesicular stomatitis virus G protein as model proteins, we have analyzed the effects of dithiothreitol (DTT) on conformational maturation and transport of glycoproteins in the secretory pathway of living cells. While DTT caused reduction of folding intermediates and misfolded proteins in the endoplasmic reticulum (ER), it did not affect molecules that had already acquired a mature trimeric conformation, whether present in the ER or elsewhere. The conversion to DTT resistance was therefore a pre-Golgi event. Reduction of folding intermediates was dependent on the intactness of the ER and on metabolic energy, suggesting cooperativity between DTT and ER folding factors. DTT did not inhibit most cellular functions, including ATP synthesis and protein transport within the secretory pathway. The results established DTT as an effective tool for analyzing the folding and compartmental distribution of proteins with disulfide bonds.     

Differentiation potential of human adipose stem cells bioprinted with hyaluronic acid/gelatin‐based bioink through microextrusion and visible light‐initiated crosslinking

Bioprinting has a great potential to fabricate three‐dimensional (3D) functional tissues and organs. In particular, the technique enables fabrication of 3D constructs containing stem cells while maintaining cell proliferation and differentiation abilities, which is believed to be promising in the fields of tissue engineering and regenerative medicine. We aimed to demonstrate the utility of the bioprinting technique to create hydrogel constructs consisting of hyaluronic acid (HA) and gelatin derivatives through irradiation by visible light to fabricate 3D constructs containing human adipose stem cells (hADSCs). The hydrogel was obtained from a solution of HA and gelatin derivatives possessing phenolic hydroxyl moieties in the presence of ruthenium(II) tris‐bipyridyl dication and sodium ammonium persulfate. hADSCs enclosed in the bioprinted hydrogel construct elongated and proliferated in the hydrogel. In addition, their differentiation potential was confirmed by examining the expression of pluripotency marker genes and cell surface marker proteins, and differentiation to adipocytes in adipogenic differentiation medium. Our results demonstrate the great potential of the bioprinting method and the resultant hADSC‐laden HA/gelatin constructs for applications in tissue engineering and regenerative medicine.     

Role of sulfhydryl groups in phospholipid methylation reactions of cardiac sarcolemma

The effect of reagents that modify sulfur-containing amino acid residues in the phosphatidylethanolamine N-methyltransferase was studied in the isolated rat cardiac sarcolemma by employing S-adenosyl-L-[methyl-³H]methionine as a methyl donor. Dithiothreitol protected the sulfhydryl groups in the membrane and caused a concentration- and time-dependent increase of phospholipid N-methylation at three different catalytic sites. This stimulation was highest (9-fold) in the presence of 1 MM MgCl₂ and 0.1 µM S-adenosyl-L-[methyl-³H]methionine at pH 8.0 (catalytic site 1), and was associated with an enhancement of V_max without changes in K_m for the methyl donor. Thiol glutathione was less stimulatory than dithiothreitol; glutathione disulfide inhibited the phosphatidylethanolamine N-methylation by 50%. The alkylating reagents, N-ethylmaleimide and methylmethanethiosulfonate, inhibited the N-methylation with IC_5O of 6.9 and 14.1 µM, respectively; this inhibition was prevented by 1 mM dithiothreitol. These results indicate a critical role of sulfhydryl groups for the activity of the cardiac sarcolemmal phosphatidylethanolamine N-methyltransferase and suggest that this enzyme system in cardiac sarcolemma may be controlled by the glutathione/glutathione disulfide redox state in the cell.Abbreviations AdoMet S-Adenosyl-L-methionine - AdoHey S-adenosyl-L-homocysteine - DTNB 5,5dithiobis (2-nitrobenzoate) - NEM N-ethylmaleimide - MMTS methylmethanethiosulfonate - DTT dithiothreitol - EDTA Ethylenediaminetetraacetic acid - GSH glutathione - GSSG glutathione disulfide - PE phosphatidylethanolamine - PMME phosphatidyl-N-monomethylethamolamine - PDME phosphatidyl-N-dimethylethanolamine - PC phosphatidylcholine - NPL nonpolar lipids - SL sarcolemma     

Efficient gene transfer using reversibly cross-linked low molecular weight polyethylenimine.

Polyethylenimine (PEI) is a polycation with potential application as a nonviral vector for gene delivery. Here we show that after conjugation with homobifunctional amine reactive reducible cross-linking reagents, low molecular weight polyethylenimine efficiently mediates in vitro gene delivery to Chinese hamster ovary (CHO) cells. Two cross-linking reagents, dithiobis(succinimidylpropionate) (DSP) and dimethyl.3,3'-dithiobispropionimidate*2HCl (DTBP), were utilized based on their reactivity and chemical properties. Both reagents react with primary amines to form reducible cross-links; however, unlike DSP, the DTBP cross-linker maintains net polymer charge through amidine bond formation. PEI with a reported weight-average molecular weight (M(w)) of 800 Da was reacted with either DSP or DTBP at PEI primary amine:cross-link reactive group ratios of 1:1 and 2:1. The transfection efficiencies of the resulting cross-linked products were evaluated in CHO cells using a luciferase reporter gene under a cytomegalovirus (CMV) promoter. Our results show that cross-linked polymers mediate variable levels of transfection depending on the cross-linking reagent, the extent of conjugation, and the N/P ratio. In general, we found conjugate size to be proportional to gene transfer efficiency. Using gel retardation analysis, we also evaluate the capacity of the cross-linked polymers to condense plasmid DNA before and after reduction with 45 mM dithiothreitol (DTT). DTT mediated reduction of intra-cross-link disulfide bonds and inhibited condensation of DNA by conjugates cross-linked with DSP at a ratio of 1:1, but had little effect on the remaining polymers. Analogous intracellular reduction of transfection complexes by reduced glutathione could facilitate uncoupling of PEI from DNA to enhance gene expression.     

Sulfhydryls of platelet tubulin: their role in polymerization and colchicine binding

Sulfhydryls and disulfides of platelet tubulin have been quantified, their accessibility and reactivity measured, and their role in polymerization and colchicine binding evaluated. Platelet tubulin isolated by two cycles of temperature-dependent polymerization--depolymerization was found to contain 12 free sulfhydryl groups per tubulin monomer all of which reacted rapidly with p-chloromercuribenzoate. One sulfhydryl was inaccessible to dithiobis(nitrobenzoic acid). Under anaerobic conditions of tubulin extraction, one intrachain disulfide bridge was found per tubulin monomer. Polymerization of tubulin reduced the number of sulfhydryls by one which were able to react with p-chloromercuribenzoate or dithiobis(nicotinic acid) but did not affect the disulfide bridge. Polymerizability of platelet tubulin was very sensitive to blocking of free sulfhydryl groups. Complete inhibition of microtubule assembly was obtained when the number of free sulfhydryls per tubulin was reduced by 3 but could be reversed by the addition of dithiothreitol. Colchicine binding, on the other hand, was only minimally influenced by blocking of sulfhydryls.