Fermentation of raw glycerol to 1,3-propanediol by new strains ofClostridium butyricum

Industrial glycerol obtained through the transesterification process using rapeseed oil did not support growth of several strains ofClostridium butyricum obtained from bacterial culture collections. Ten new strains ofC. butyricum were obtained from mud samples from a river, a stagnant pond, and a dry canal. These new isolates fermented the commercial glycerol and produced 1,3-propanediol as a major fermentation product with concomitant production of acetic and butyric acids. Four of the ten isolates were able to grow on industrial glycerol obtained from rapeseed oil. One strain,C. butyricum E5, was very resistant to high levels of glycerol and 1,3-propanediol. Using fed-batch fermentation, 109 g L^–1 of industrial glycerol were converted into 58 g of 1,3-propanediol, 2.2 g of acetate and 6.1 g of butyrate per liter.     

The fermentation of glycerol byClostridium butyricum LMG 1212t2 and 1213t1 andC. pasteurianum LMG 3285

Summary In batch culture on reiinforced clostridial medium strain-dependent product profiles from glycerol revealed unusual fermentation products such as propionate and n-propanol with Clostridium butyricum LMG 1213t₁, and 1,3-propanediol with C. butyricum LMG 1212t₂ and C. pasteurianium LMG 3285. Only the latter two strains were able to grow on glycerol in a minimal medium. Nicotinamide adenine dinucleotide (NAD⁺)-dependent dehydrogenase activities were detected with 1,3-propanediol and n-butanol as substrate (the latter only after a lag period) in cell-free extracts of C. butyricum LMG 1212t₂ and with 1,3-propanediol, n-butanol and ethanol in cell-free extracts of C. pasteurianum LMG 3285. The data indicated the existance of a specific 1,3-propanediol dehydrogenase in both organisms. In a chemostat, C. butyricum LMG 1212t₂ converted 65% of the glycerol supplied as sole carbon and energy source to 1,3-propanediol without H₂ production. Increasing concentration of acetate in the inflow medium resulted in less 1,3-propanediol and more butyrate and H₂ production. C. pasteurianum LMG 3285 converted somewhat more than half of the glycerol supplied as sole energy and carbon source to n-butanol with significant concomitant H₂ production. This fermentation pattern was hardly affected by acetate as co-substrate. Offprint requests to: P. De Vos     

High production of 1,3-propanediol from glycerol by Clostridium butyricum VPI 3266 in a simply controlled fed-batch system

Summary A simple fed-batch system which controls substrate feeding by measuring the CO₂ produced during the fermentation, was developped. This Fed-batch approach allowed high production of 1,3-propanediol from glycerol by Clostridium butyricum by avoiding substrate inhibition phenomena. 65 g/l of 1,3-propanediol was produced with a productivity of 1.21 g/l.h and a yield of 0.56. The concentration of 1,3-propanediol obtained and the productivity were significantly higher than those reached in batch culture.     

An improved screening method for microorganisms able to convert crude glycerol to 1,3-propanediol and to tolerate high product concentrations

A new screening method was developed and established to find high-performance bacteria for the conversion of crude glycerol to 1,3-propanediol. Three soil samples from palm oil-rich habitats were investigated using crude glycerol of a German biodiesel plant. Nine promising 1,3-propanediol producers could be found. Because of a special pH buffer system, a fast evaluation on microscale and high 1,3-propanediol concentrations up to 40 g L⁻¹ could be achieved. Three strains demonstrated very high product tolerance and were identified as Clostridium butyricum. Two strains, AKR91b and AKR102a, grew and produced 1,3-propanediol in the presence of 60 g L⁻¹ initial 1,3-propanediol, the strain AKR92a even in the presence of 77 g L⁻¹ 1,3-propanediol. The strains AKR91b and AKR102a tolerated up to 150 g L⁻¹ crude glycerol and produced 80% of the 1,3-propanediol attained from pure glycerol of the same concentration. Further criteria for the choice of a production strain were the pathogenicity (risk class), ability to grow on low-cost media, e.g., with less yeast extract, and robustness, e.g., process stability after several bioconversions. Overall, the strain C. butyricum AKR102a was chosen for further process optimization and scale-up due to its high productivity and high final concentration in a pH-regulated bioreactor.     

Effects of Acetate and Butyrate During Glycerol Fermentation by Clostridium butyricum

The effects of acetate and butyrate during glycerol fermentation to 1,3-propanediol at pH 7.0 by Clostridium butyricum CNCM 1211 were studied. At pH 7.0, the calculated quantities of undissociated acetic and butyric acids were insufficient to inhibit bacterial growth. The initial addition of acetate or butyrate at concentrations of 2.5 to 15 gL⁻¹ had distinct effects on the metabolism and growth of Clostridium butyricum. Acetate increased the biomass and butyrate production, reducing the lag time and 1,3-propanediol production. In contrast, the addition of butyrate induced an increase in 1,3-propanediol production (yield: 0.75 mol/mol glycerol, versus 0.68 mol/mol in the butyrate-free culture), and reduced the biomass and butyrate production. It was calculated that reduction of butyrate production could provide sufficient NADH to increase 1,3-propanediol production. The effects of acetate and butyrate highlight the metabolic flexibility of Cl. butyricum CNCM 1211 during glycerol fermentation. Received: 2 January 2001 / Accepted: 6 February 2001     

Fermentation of glycerol to 1,3-propanediol: use of cosubstrates

Three fermentable substances, glucose, 1,2-ethanediol and 1,2-propanediol were checked as cosubstrates for the fermentation of glycerol by Clostridium butyricum and Citrobacter freundii with the aim of achieving a complete conversion of glycerol to 1,3-propanediol. Glucose was fermented by C. butyricum mainly to acetate, CO₂ and reducing equivalents in the presence of glycerol and contributed markedly to the 1,3-propanediol yield. However, because of relatively slow growth on glucose, complete conversion was not achieved. If the two glycols were used as cosubstrates for glycerol fermentation, the 1,3-propanediol yield did not increase but dimished considerably, as they were converted to more reduced products, i.e. alcohols instead of acids. From 1,2-propanediol 2-propanol was formed in addition to 1-propanol. The ratio of the propanols was dependent on the culture conditions.     

Production of 1,3-propanediol by <Emphasis Type="Italic">Clostridium butyricum</Emphasis> VPI 3266 using a synthetic medium and raw glycerol

Growth inhibition of Clostridium butyricum VPI 3266 by raw glycerol, obtained from the biodiesel production process, was evaluated. C. butyricum presents the same tolerance to raw and to commercial glycerol, when both are of similar grade, i.e. above 87% (w/v). A 39% increase of growth inhibition was observed in the presence of 100 g l^–1 of a lower grade raw glycerol (65% w/v). Furthermore, 1,3-propanediol production from two raw glycerol types (65% w/v and 92% w/v), without any prior purification, was observed in batch and continuous cultures, on a synthetic medium. No significant differences were found in C. butyricum fermentation patterns on raw and commercial glycerol as the sole carbon source. In every case, 1,3-propanediol yield was around 0.60 mol/mol glycerol consumed.     

High-level production of 1,3-propanediol from crude glycerol by <Emphasis Type="Italic">Clostridium butyricum</Emphasis> AKR102a

The aim of this study was to optimize a biotechnological process for the production of 1,3-propanediol (1,3-PD) based on low-quality crude glycerol derived from biodiesel production. Clostridium butyricum AKR102a was used in fed-batch fermentations in 1-L and 200-L scale. The newly discovered strain is characterized by rapid growth, high product tolerance, and the ability to use crude glycerol at the lowest purity directly gained from a biodiesel plant side stream. Using pure glycerol, the strain AKR102 reached 93.7 g/L 1,3-PD with an overall productivity of 3.3 g/(L*h). With crude glycerol under the same conditions, 76.2 g/L 1,3-PD was produced with a productivity of 2.3 g/(L*h). These are among the best results published so far for natural producers. The scale up to 200 L was possible. Due to the simpler process design, only 61.5 g/L 1,3-PD could be reached with a productivity of 2.1 g/(L*h).     

Carbon and electron flow in Clostridium butyricum grown in chemostat culture on glucose-glycerol mixtures

Summary The metabolism of C. butyricum was manipulated, at neutral pH and in carbon limited chemostat cultures by changing the overall degree of reduction of the substrate, using mixtures of glucose and glycerol. Cultures grown on glucose alone produced only acids (acetate, butyrate and lactate). When the glycerol (in C moles)/glucose+glycerol (in C moles) ratio was progressively changed from 0 to 1 a corresponding increase of 1,3-propanediol production occured and an immediate and drastic decrease of the specific rate of acetate production was observed while the specific rate of butyrate production only decreased slightly. For glycerol (in C moles)/glucose+glycerol (in C moles) ratios higher than 0.5, the q_{NAD(P)H from Fd} and the CO₂/H₂ molar ratio increased sharply, the first becoming positive and the second higher than 1. This indicates a complete reversion of the electron flow: part of reduced ferredoxin produced by the phosphoroclastic cleavage of pyruvate to acetyl-CoA was diverted from H₂ formation toward NAD(P) reduction by the ferredoxin-NAD(P) reductase(s) in order to produce NAD(P)H. This change in the electron flow was associated to an increase in the specific rate and the yield of 1,3-propanediol production related to glycerol.     

Inhibition of Clostridium butyricum by 1,3-propanediol and diols during glycerol fermentation

1,3-Propanediol inhibition during glycerol fermentation to 1,3-propanediol by Clostridium butyricum CNCM 1211 has been studied. The initial concentration of the 1,3-propanediol affected the growth of the bacterium more than the glycerol fermentation. μ _max was inversely proportional to the initial concentration of 1,3-propanediol (0–65 g l⁻¹). For glycerol at 20 g l⁻¹, the growth and fermentation were completely stopped at an initial 1,3-propanediol concentration of 65 g l⁻¹. However, for an initial 1,3-propanediol concentration of 50 g l⁻¹ and glycerol at 70 g l⁻¹, the final concentration (initial and produced) of 1,3-propanediol reached 83.7 g l⁻¹(1.1 M), with complete consumption of the glycerol. Therefore, during the fermentation, the strain tolerated a 1,3-propanediol concentration higher than the initial inhibitory concentration (65 g l⁻¹). The addition of 1,2-propanediol or 2,3-butanediol (50 g l⁻¹) in the presence of glycerol (50–100 g l⁻¹), showed that 2-diols reduced the μ _max in a similar way to 1,3-propanediol. The measurement of the osmotic pressure of glycerol solutions, diols and diol/glycerol mixtures did not indicate any differences between these compounds. The hypothesis of diol inhibition was discussed. Taking into account the strain tolerance of highly concentrated 1,3-propanediol during fermentation, the fermentation processes for optimising production were considered. Received: 15 November 1999 / Revision received: 1 February 2000 / Accepted: 4 February 2000     

Influence of iron,phosphate and methyl viologen on glycerol fermentation of Clostridium butyricum

 The effect of methyl viologen addition, and iron and phosphate limitation on product distribution during glycerol fermentation of Clostridium butyricum DSM 5431 was investigated in continuous culture. Special attention was paid to the gaseous products H₂ and CO₂, which were measured on-line. In all three cases, an increased yield of 1,3-propanediol linked to a decreased hydrogen release was observed, indicating that a higher proportion of electrons was channelled from reduced ferredoxin towards NADH₂ production. The specific substrate consumption rates and the specific production rates revealed that this increase in propanediol yield was not obtained at the expense of glycolysis products but by an increased substrate conversion (overflow metabolism). The acetate/ butyrate ratio during glycerol fermentation was essentially influenced by the availability of iron. It was substantially increased when the culture turned from iron excess to iron-limited conditions. Therefore iron limitation proved to be a suitable means to achieve high 1,3-propanediol yields and to reduce butyrate formation. Received: 29 August 1995 / Accepted: 20 September 1995     

Inactivation of <Emphasis Type="Italic">dhaD</Emphasis> and <Emphasis Type="Italic">dhaK</Emphasis> abolishes by-product accumulation during 1,3-propanediol production in <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis>

1,3-Propanediol (1,3-PD) can be used for the industrial synthesis of a variety of compounds, including polyesters, polyethers, and polyurethanes. 1,3-PD is generated from petrochemical and microbial sources. 1,3-Propanediol is a typical product of glycerol fermentation, while acetate, lactate, 2,3-butanediol, and ethanol also accumulate during the process. Substrate and product inhibition limit the final concentration of 1,3-propanediol in the fermentation broth. It is impossible to increase the yield of 1,3-propanediol by using the traditional whole-cell fermentation process. In this study, dhaD and dhaK, the genes for glycerol dehydrogenase and dihydroxyacetone kinase, respectively, were inactivated by homologous recombination in Klebsiella pneumoniae. The dhaD/dhaK double mutant (designated TC100), selected from 5,000 single or double cross homologous recombination mutants, was confirmed as a double cross by using polymerase chain reaction. Analysis of the cell-free supernatant with high-performance liquid chromatography revealed elimination of lactate and 2,3-butanediol, as well as ethanol accumulation in TC100, compared with the wild-type strain. Furthermore, 1,3-propanediol productivity was increased in the TC100 strain expressing glycerol dehydratase and 1,3-PDO dehydrogenase regulated by the arabinose P_BAD promoter. The genetic engineering and medium formulation approaches used here should aid in the separation of 1,3-propanediol from lactate, 2,3-butanediol, and ethanol and lead to increased production of 1,3-propanediol in Klebsiella pneumoniae.     

Microbial Conversion of Glycerol to 1,3-Propanediol: Physiological Comparison of a Natural Producer, Clostridium butyricum VPI 3266, and an Engineered Strain, Clostridium acetobutylicum DG1(pSPD5)

Clostridium acetobutylicum is not able to grow on glycerol as the sole carbon source since it cannot reoxidize the excess of NADH generated by glycerol catabolism. Nevertheless, when the pSPD5 plasmid, carrying the NADH-consuming 1,3-propanediol pathway from C. butyricum VPI 3266, was introduced into C. acetobutylicum DG1, growth on glycerol was achieved, and 1,3-propanediol was produced. In order to compare the physiological behavior of the recombinant C. acetobutylicum DG1(pSPD5) strain with that of the natural 1,3-propanediol producer C. butyricum VPI 3266, both strains were grown in chemostat cultures with glycerol as the sole carbon source. The same “global behavior” was observed for both strains: 1,3-propanediol was the main fermentation product, and the qH₂ flux was very low. However, when looking at key intracellular enzyme levels, significant differences were observed. Firstly, the pathway for glycerol oxidation was different: C. butyricum uses a glycerol dehydrogenase and a dihydroxyacetone kinase, while C. acetobutylicum uses a glycerol kinase and a glycerol-3-phosphate dehydrogenase. Secondly, the electron flow is differentially regulated: (i) in C. butyricum VPI 3266, the in vitro hydrogenase activity is 10-fold lower than that in C. acetobutylicum DG1(pSPD5), and (ii) while the ferredoxin-NAD⁺ reductase activity is high and the NADH-ferredoxin reductase activity is low in C. acetobutylicum DG1(pSPD5), the reverse is observed for C. butyricum VPI 3266. Thirdly, lactate dehydrogenase activity is only detected in the C. acetobutylicum DG1(pSPD5) culture, explaining why this microorganism produces lactate.     

Construction of a novel recombinant Escherichia coli strain capable of producing 1,3–propanediol and optimization of fermentation parameters by statistical design

Summary The structural gene yqhD from a wild-type Escherichia coli encoding 1,3-propanediol oxidoreductase isoenzyme and the structural gene dhaB from Citrobacter freundii encoding glycerol dehydratase were amplified by using the PCR method. The temperature control expression vector pHsh harboring the yqhD and dhaB genes was transformed into E. coli JM109 to yield the recombinant strain E. coli JM109 (pHsh-dhaB-yqhD). The response surface method (RSM) was then applied to further optimize the fermentation condition of the recombinant strain. A mathematical model was then developed to show the effect of each medium composition and their interactions on the production of 1,3-propanediol by recombinant strain E. coli JM109. The model estimated that a maximal yield of 1,3-propanediol (43.86 g/l) could be obtained when the concentrations of glycerol, yeast extract and vitamin B₁₂ were set at 61.8 g/l, 6.2 g/l and 49 mg/l, respectively; and the fermentation time was 30 h. These predicted values were also verified by validation experiments. Compared with the values obtained by other runs in the experimental design, the optimized medium resulted in a significant increase in the yield of 1,3-propanediol. The yield and productivity under the optimal parameters and process can reach 43.1 g/l and 1.54 g/l/h. Maximum 1,3-propanediol yield of 41.1 g/l was achieved in a 5-l fermenter using the optimized medium. This makes the engineered strain have potential application in the conversion of glycerol to 1,3-propanediol on an industrial scale.     

Production of 1,3-Propanediol by Clostridium butyricum VPI 3266 in continuous cultures with high yield and productivity

The effects of dilution rate and substrate feed concentration on continuous glycerol fermentation by Clostridium butyricum VPI 3266, a natural 1,3-propanediol producer, were evaluated in this work. A high and constant 1,3-propanediol yield (around 0.65 mol/mol), close to the theoretical value, was obtained irrespective of substrate feed concentration or dilution rate. Improvement of 1,3-propanediol volumetric productivity was achieved by increasing the dilution rate, at a fixed feed substrate concentration of 30, 60 or 70 g l⁻¹. Higher 1,3-propanediol final concentrations and volumetric productivities were also obtained when glycerol feed concentration was increased from 30 to 60 g l⁻¹, at D=0.05–0.3 h⁻¹, and from 60–70 g l⁻¹, at D=0.05 and 0.1 h⁻¹·30 g l⁻¹ of 1,3-propanediol and the highest reported value of productivity, 10.3 g l⁻¹ h⁻¹, was achieved at D=0.30 h⁻¹ and 60 g l⁻¹ of feed glycerol. A switch to an acetate/butyrate ratio higher than one was observed for 60 g l⁻¹ of feed glycerol and a dilution rate higher than 0.10 h⁻¹; moreover, at D=0.30 h⁻¹ 3-hydroxypropionaldehyde accumulation was observed for the first time in the fermentation broth of C. butyricum.     

Glycerol fermentation by a new 1,3-propanediol-producing microorganism:Enterobacter agglomerans

 According to their ability to synthesize 1,3-propanediol from glycerol, two species were isolated from the anoxic mud of a distillery waste-water digestor: Clostridium butyricum and Enterobacter agglomerans. The latter, a facultatively anaerobic gram-negative bacterium, is described for the first time as a microorganism producing 1,3-propanediol from glycerol. The products of glycerol conversion by E. agglomerans were identified using nuclear magnetic resonance. A 20-g/l glycerol solution was fermented mainly to 1,3-propanediol (0.51 mol/mol) and acetate (0.18 mol/mol). Ethanol, formate, lactate and succinate were formed as by-products. Gas production was very low; 1,3-propanediol production perfectly balanced the oxido-reduction state of the microorganism. Acetate was the predominant metabolite generating energy for growth. High-glycerol-concentration fermentations (71 g/l and 100 g/l) resulted in an increase of the 1,3-propanediol yield (0.61 mol/mol) at the expense of lactate and ethanol production. Specific rates of glycerol consumption and 1, 3-propanediol and acetate production increased whereas the growth rate decreased. The decrease in ATP yield was linearly correlated with the specific rate of 1,3-propanediol production. Incomplete glycerol consumption (about 40 g/l) was systematically observed when high glycerol concentrations were used. The unbalanced oxido-reduction state, the low carbon recovery and the detection of an unknown compound by HPLC observed in these cases indicate the formation of another metabolite, which is possibly an inhibitory factor. Received: 17 November 1994 / Accepted: 15 December 1994     

Metabolic modelling of syntrophic-like growth of a 1,3-propanediol producer, Clostridium butyricum, and a methanogenic archeon, Methanosarcina mazei, under anaerobic conditions

Clostridium butyricum can convert glycerol into 1,3-propanediol, thereby generating unfortunately a high amount of acetate, formate and butyrate as inhibiting by-products. We have proposed a novel mixed culture comprising C. butyricum and a methane bacterium, Methanosarcina mazei, to relieve the inhibition and to utilise the by-products for energy production. In order to examine the efficiency of such a mixed culture, metabolic modelling of the culture system was performed in this work. The metabolic networks for the organisms were reconstructed from genomic and physiological data. Several scenarios were analysed to examine the preference of M. mazei in scavenging acetate and formate under conditions of different substrate availability, including methanol as a co-substrate, since it may exist in glycerol solution from biodiesel production. The calculations revealed that if methanol is present, the methane production can increase by 130%. M. mazei can scavenge over 70% of the acetate secreted by C. butyricum.     

Production of 1,3-Propanediol from Glycerol by Clostridium acetobutylicum and Other Clostridium Species

Glycerol was fermented with the production of 1,3-propanediol as the major fermentation product by four strains of Clostridium acetobutylicum, six of C. butylicum, two of C. beijerinckii, one of C. kainantoi, and three of C. butyricum. 1,3-Propanediol was identified by its retention times in gas chromatography and high-pressure liquid chromatography and by its mass spectrum. During growth of C. butylicum B593 in a chemostat culture at pH 6.5, 61% of the glycerol fermented was converted to 1,3-propanediol. When the pH was decreased to 4.9, growth and 1,3-propanediol production were substantially reduced.     

1,3-Propanediol production in a two-step process fermentation from renewable feedstock

In this work, the production of 1,3-propanediol from glucose and molasses was studied in a two-step process using two recombinant microorganisms. The first step of the process is the conversion of glucose or other sugar into glycerol by the metabolic engineered Saccharomyces cerevisiae strain HC42 adapted to high (>200 g l⁻¹) glucose concentrations. The second step, carried out in the same bioreactor, was performed by the engineered strain Clostridium acetobutylicum DG1 (pSPD5) that converts glycerol to 1,3-propanediol. This two-step strategy led to a flexible process, resulting in a 1,3-propanediol production and yield that depended on the initial sugar concentration. Below 56.2 g l⁻¹ of sugar concentration, cultivation on molasses or glucose showed no significant differences. However, at higher molasses concentrations, glycerol initially produced by yeast could not be totally converted into 1,3-propanediol by C. acetobutylicum and a lower 1,3-propanediol overall yield was observed. In our hand, the best results were obtained with an initial glucose concentration of 103 g l⁻¹, leading to a final 1,3-propanediol concentration of 25.5 g l⁻¹, a productivity of 0.16 g l⁻¹ h⁻¹ and 1,3-propanediol yields of 0.56 g g⁻¹ glycerol and 0.24 g g⁻¹ sugar, which is the highest value reported for a two-step process. For an initial sugar concentration (from molasses) of 56.2 g l⁻¹, 27.4 g l⁻¹ of glycerol were produced, leading to 14.6 g l⁻¹ of 1.3-propanediol and similar values of productivity, 0.15 g l⁻¹ h⁻¹, and overall yield, 0.26 g g⁻¹ sugar.     

Metabolic engineering of Clostridium acetobutylicum for the industrial production of 1,3-propanediol from glycerol

Clostridium butyricum is to our knowledge the best natural 1,3-propanediol producer from glycerol and the only microorganism identified so far to use a coenzyme B12-independent glycerol dehydratase. However, to develop an economical process of 1,3-propanediol production, it would be necessary to improve the strain by a metabolic engineering approach. Unfortunately, no genetic tools are currently available for C. butyricum and all our efforts to develop them have been so far unsuccessful. To obtain a better "vitamin B12-free" biological process, we developed a metabolic engineering strategy with Clostridium acetobutylicum. The 1,3-propanediol pathway from C. butyricum was introduced on a plasmid in several mutants of C. acetobutylicum altered in product formation. The DG1(pSPD5) recombinant strain was the most efficient strain and was further characterized from a physiological and biotechnological point of view. Chemostat cultures of this strain grown on glucose alone produced only acids (acetate, butyrate and lactate) and a high level of hydrogen. In contrast, when glycerol was metabolized in chemostat culture, 1,3-propanediol became the major product, the specific rate of acid formation decreased and a very low level of hydrogen was observed. In a fed-batch culture, the DG1(pSPD5) strain was able to produce 1,3-propanediol at a higher concentration (1104 mM) and productivity than the natural producer C. butyricum VPI 3266. Furthermore, this strain was also successfully used for very long term continuous production of 1,3-propanediol at high volumetric productivity (3 g L-1 h-1) and titer (788 mM).