Formation of the exopolysaccharide ethapolan by Acinetobacter sp. IMV B-7005 on a fumarate-glucose mixture

Our studies enabled us to intensify the synthesis of the microbial exopolysaccharide (EPS) ethapolan produced by Acinetobacter sp. IMV B-7005 grown on a mixture of fumarate (an energy-excessive substrate) and glucose (an energy-deficient substrate). Supplementing glucose-containing medium with sodium (potassium) fumarate at a molar ratio of 4:1 resulted in a 1.3-2.2-fold increase of the EPS amount synthesized and in a 1.3-2-fold increase of the EPS yield relative to the biomass compared to monosubstrate cultivation. The conversion of the carbon of both substrates to EPS was the highest if the carbon/nitrogen ratio in the cultivation medium was 70.5 and inoculum grown on glucose monosubstrate was used.     

Formation of the exopolysaccharide ethapolan by <Emphasis Type="Italic">Acinetobacter</Emphasis> sp. IMV B-7005 on a fumarate-glucose mixture

Our studies enabled us to intensify the synthesis of the microbial exopolysaccharide (EPS) ethapolan produced by Acinetobacter sp. IMV B-7005 grown on a mixture of fumarate (an energy-excessive substrate) and glucose (an energy-deficient substrate). Supplementing glucose-containing medium with sodium (potassium) fumarate at a molar ratio of 4: 1 resulted in a 1.3–2.2-fold increase of the EPS amount synthesized and in a 1.3–2-fold increase of the EPS yield relative to the biomass compared to cultivation on monosubstrates. The conversion of the carbon of both substrates to EPS was the highest if the carbon/nitrogen ratio in the cultivation medium was 70.5 and inoculum grown on glucose monosubstrate was used.     

Intensification of synthesis of the exopolysaccharide ethapolan by Acinetobacter sp. 12S grown on a mixture of substrates

Enhanced synthesis of the exopolysaccharide (EPS) ethapolan by Acinetobacter sp. 12S was observed when the bacterium was grown on a mixture of two energetically nonequivalent substrates (ethanol and glucose) taken in a molar proportion of 3.1:1. The efficiency of carbon transformation into EPSs was maximum when sodium ions were absent in the medium, the concentration of nitrogen source was reduced to 0.3-0.45 g/l, and the inoculum was grown on ethanol. Such conditions provided an increase in the maximum specific growth rate and its attainment in earlier cultivation terms. Molasses as a substitution for glucose was inefficient. The activities of the key enzymes of C2-metabolism in Acinetobacter sp. 12S cells grown on the substrate mixture was 1.1 to 1.7 times lower than they were during growth on ethanol alone. The activity of isocitrate lyase in cells grown on the substrate mixture declined to an even greater extent (by 4 to 7 times), indicating that the role of the glyoxylate cycle in such cells is insignificant.     

Characterization of the extracellular polymeric substances produced by Escherichia coli using infrared spectroscopic, proteomic, and aggregation studies

The aim of this study was twofold: first, to characterize the free extracellular polymeric substances (EPS) and bound EPS produced by Escherichia coli during different growth phases in different media, and then to investigate the role of the free EPS in promoting aggregation. EPS was extracted from a population of E. coli MG1655 cells grown in different media composition (Luria-Bertani (LB) and Luria-Bertani with the addition of 0.5 w/v% glucose at the beginning of the growth phase (LBG)) and at different growth phases (6 and 24 h). The extracted EPS was characterized using Fourier transform infrared spectroscopy and further identified using one-dimensional gel-based electrophoresis and tandem mass spectrometry. E. coli MG1655 was found to produce significantly lower amounts of bound EPS compared to free EPS under all conditions. The protein content of free EPS increased as the cells progressed from the exponential to stationary phase when grown in LB or LBG, while the carbohydrate content only increased across the growth phases for cells grown in LBG. FTIR revealed a variation in the different functional groups such as amines, carboxyl, and phosphoryl groups for free EPS extracted at the different growth conditions. Over 500 proteins were identified in the free EPS, with 40 proteins common in all growth conditions. Proteins with functionality related to amino acid and carbohydrate metabolism, as well as cell wall and membrane biogenesis were among the highest proteins identified in the free EPS extracted from E. coli MG1655 under all growth and media conditions. The role of bound and free EPS was investigated using a standardized aggregation assay. Bound EPS did not contribute to aggregation of E. coli MG1655. The readdition of free EPS to E. coli MG1655 resulted in aggregation of the cells in all growth conditions. Free EPS extracted from the 24 h E. coli MG1655 cultures grown in LB had the greatest effect on aggregation of cells grow in LBG, with a 30% increase in aggregation observed.     

Characterization of exopolymeric substances (EPS) produced by Aeromonas hydrophila under reducing conditions

The aim of this work was to investigate the production of extracellular polymeric substances (EPS) by Aeromonas hydrophila grown under anaerobic conditions. EPS composition was studied for planktonic cells, cells attached to carbon fibre supports using a soluble ferric iron source and cells grown with a solid ferric iron mineral (gossan). Conventional spectrophotometric methods, Fourier transform infrared (FTIR) and confocal laser scanning microscopy (CLSM) were used to determine the main components in the biofilm extracted from the cultures. The key EPS components were proteins, indicating their importance for electron transfer reactions. Carbohydrates were observed mostly on the mineral and contained terminal mannosyl and/or terminal glucose, fucose and N-acetylgalactosamine residues.     

Extracellular polysaccharide production byRhizobium ciceri from Turkey

The ability of theRhizobium ciceri, to produce extracellular polysaccharides (EPS) was investigated. Tested carbon and nitrogen sources influced EPS synthesis whenR. ciceri Rc5 was grown in a chemically defined medium. Mannitol was the most efficient carbon source among the six sources tested (sucrose, glucose, arabinose, fructose, xylose and rhamnose) and sodium nitrate was the most efficient nitrogen source among the two tested (ammonium sulphate and glycine). High amounts of EPS (1182.0 and 1015 μg ml−1, respectively) were produced by the Rc5 strain in mannitol and sodium nitrate respectively, which was accompanied by a great increase in the production compared to the control.     

Exopolysaccharide production by a new Halomonas strain CRSS isolated from saline lake Cape Russell in Antarctica growing on complex and defined media

A haloalkalophilic Halomonas strain CRSS, isolated from salt sediments in Antarctica, produced exocellular polysaccharides (EPS) up to 2.9gg^-1 dry cells. Acetate was the most efficient carbon source for EPS production. The composition of media strongly affected the nature of the polymers; a mannan and a xylo-mannan, were obtained when cells were grown on complex media. Acetate was the most efficient carbon source for EPS production and in presence of this substrate, a new polysaccharide, a fructo-glucan, was produced. The EPS fraction was composed by glucose, fructose, glucosamine and galactosamine in relative proportions of 1:0.7:0.3:trace.Revisions requested; Revisions received 6 September 2004     

Yield and physicochemical properties of EPS from Halomonas sp. strain TG39 identifies a role for protein and anionic residues (sulfate and phosphate) in emulsification of n‐hexadecane

In this study, we investigated the yield and physicochemical properties of the high molecular weight extracellular polymeric substance (HMW–EPS) produced by Halomonas sp. strain TG39 when grown on different types and ratios of substrates. Glucose (1% w/v) and a peptone/yeast extract ratio of 5.1 (0.6% w/v final concentration) yielded an EPS fraction (HMW‐glucose) exhibiting the highest anionic activity (20.5) and specific emulsifying activity (EI₂₄ = 100%) compared to EPS produced by cells grown on mannitol, sucrose, malt extract or no carbon source. The HMW–EPS fractions were capable of binding ≈255–464 mg of methylene blue (MB) per gram of EPS, which represents the highest reported binding of MB by a bacterial EPS. A comparative evaluation of these properties to those of commercial hydrocolloids indicated that the combined effect of protein and anionic residues of the HMW–EPS contributed to its ability to emulsify n‐hexadecane. Liquid chromatography revealed the HMW‐glucose EPS to be a heterogeneous polymer with a polydispersity index of 1.8. This work presents evidence of a correlation between the anionic nature and protein content of bacterial EPS with its emulsifying qualities, and identifies EPS produced by strain TG39 as a high MB‐binding bacterial sorbant with potential biotechnological application. Biotechnol. Bioeng. 2009;103: 207–216. © 2008 Wiley Periodicals, Inc.     

Exopolysaccharide production by a new Halomonas strain CRSS isolated from saline lake Cape Russell in Antarctica growing on complex and defined media

A haloalkalophilic Halomonas strain CRSS, isolated from salt sediments in Antarctica, produced exocellular polysaccharides (EPS) up to 2.9 g g(-1) dry cells. Acetate was the most efficient carbon source for EPS production. The composition of media strongly affected the nature of the polymers; a mannan and a xylo-mannan, were obtained when cells were grown on complex media. Acetate was the most efficient carbon source for EPS production and in presence of this substrate, a new polysaccharide, a fructo-glucan, was produced. The EPS fraction was composed by glucose, fructose, glucosamine and galactosamine in relative proportions of 1:0.7:0.3:trace.     

Effects of fertilizer-based culture media on the production of exocellular polysaccharides and cellular superoxide dismutase by <Emphasis Type="Italic">Phaeodactylum tricornutum</Emphasis> (Bohlin)

Microalgae cultures are receiving attention because of increasing biotechnological and biomedical production of active biomolecules. We evaluated various fertilizer-based culture media to scale up production of the marine microalga Phaeodactylum tricornutum for production of exocellular polysaccharides (EPS), soluble proteins, and cellular superoxide dismutase (SOD). The standard source of sodium nitrate was the same as that used in the synthetic f/2 culture medium and ammonium nitrate, urea, ammonium sulfate, and calcium nitrate as alternative sources of nitrogen. The maximum production of EPS was achieved in microalgae cells grown in the culture media containing 63 and 23% nitrogen from ammonium sulfate, and also in microalgae cells grown in the culture media containing 3% nitrogen from ammonium nitrate. The maximum production of cellular SOD was achieved in microalgae cells grown in the culture media containing 35 and 26% nitrogen from ammonium sulfate, and in the culture media containing 17% nitrogen from urea. The results suggest that it is possible to use a source of nitrogen, other than sodium nitrate, to scale up growth of P. tricornutum for production of EPS and SOD at reduced costs.     

Sodium/proton antiporter in Streptococcus faecalis.

Streptococcus faecalis, like other bacteria, accumulates potassium ions and expels sodium ions. This paper is concerned with the pathway of sodium extrusion. Earlier studies (D.L. Heefner and F.M. Harold, Proc. Natl. Acad. Sci. USA 79:2798-2802, 1982) showed that sodium extrusion is effected by a primary, ATP-linked sodium pump. I report here that cells grown under conditions in which sodium ATPase is not induced can still expel sodium ions. This finding suggested the existence of an alternate pathway. Sodium extrusion by the alternate pathway requires the cells to generate a proton motive force. This conclusion rests on the following observations. (i) Sodium extrusion required glucose. (ii) Sodium extrusion was observed at neutral pH, which allows the cells to generate a proton motive force, but not at alkaline pH, which reduces the proton motive force to zero. (iii) Sodium extrusion was inhibited by the addition of dicyclohexylcarbodiimide and of proton-conducting ionophores. (iv) In response to an artificial pH gradient (with the exterior acid), energy-depleted cells exhibited a transient sodium extrusion which was unaffected by treatments that dissipated the membrane potential and which was blocked by proton conductors. I propose that streptococci have two independent systems for sodium extrusion: an inducible sodium ATPase and a constitutive sodium/proton antiporter.     

Growth and exopolysaccharide (EPS) production by Oenococcus oeni I4 and structural characterization of their EPSs

AIMS: To study the influence of medium constituents on growth, and exopolysaccharide (EPS) production by a strain of Oenococcus oeni. The structure of one of the EPSs has also been characterized. METHODS AND RESULTS: EPS concentration was estimated by the phenol/sulfuric acid method. After purification and fractionation of crude EPSs, the sugar composition was determined by GLC-MS of the TMS methyl glycosides. The major polysaccharide is 2-substituted-(1-3)-beta-D-glucan. This structure was determined by methylation analysis and conventional (1)H- and (13)C-nuclear magnetic resonance spectroscopy. In addition, O. oeni synthesized two heteropolysaccharides, although a lesser proportion, constituted by galactose and glucose, and one of them also showed rhamnose. The sugar source has a clear influence on growth and EPS synthesis, and EPS production was not enhanced by adding ethanol or increasing the nitrogen source. EPS biosynthesis starts in the exponential growth phase, and continued during the stationary growth phase. CONCLUSIONS: Higher EPS yields were obtained on cultures grown on glucose + fructose. O. oeni produces a beta-glucan, as the predominant EPS, and it is also able to produce two heteropolysaccharides. Significance and Impact of the Study: This work provides a better understanding of EPS synthesis by O. oeni and shows the first EPS structure described for this species.     

Identification of L-altrose in the extracellular polysaccharide from Butyrivibrio fibrisolvens strain CF3

Abstract Butyrivibrio fibrisolvens strain CF3, a stricyly anaerobic bacterial isolate from the ovine cecum, produces extracellular polysaccharides (EPS) when grown on a defined medium containing glucose as the carbon source. EPS were purified from culture supernatants and their monosaccharide composition was determined by two different procedures. Analysis of EPS hydrolysates by thin-layer chromatography (TLC) yielded spots coincident with standard glucose, altrose, and 1,6-anhydroaltrose. These results were corroborated by both gas-liquid chromatography (GLC) and GLC-mass spectroscopy (GLC-MS) of alditol acetates prepared from EPS hydrolysates. Purification of the altrose from EPS hydrolysates was accomplished by preparative paper and column chromatography. Polarimetry demonstrated the isolated altrose to have the L -configuration. The occurrence of this hexose in nature has not yet been reported.     

Visualization of capsule formation by Erwinia amylovora and assays to determine amylovoran synthesis

Exopolysaccharide (EPS) synthesis by Erwinia amylovora depends on environmental and genetic predispositions. To measure the amount of the acidic EPS amylovoran synthesized by E. amylovora cell cultures, a turbidity assay using cetylpyridinium salt was developed. The EPS produced by bacteria grown on solid media was additionally characterized by its water content. The amylovoran capsules were visualized in situ by staining with fluorescein isothiocyanate (FITC)-labelled lectin from Abrus precatorius, which reacts with the galactose residue of the EPS side chain. The staining and the turbidity assays were applied to suspension cell cultures or to cells from colonies and did not require any purification steps. Lectin staining was superior to electron microscopic (EM) techniques for visualization of capsules. For EM, the capsule was stabilized with polycationic ferritin. In contrast to lectin staining, only a small fraction of the cells was found to be EPS-coated in the EM assay. An increase in capsulation and in amylovoran production was found in conjunction with mutations in a ribosomal protein conferring resistance to streptomycin. Furthermore, the presence of sorbitol in the growth environment resulted in high synthesis of amylovoran. Cells in the stationary growth phase continued to produce amylovoran. Apparently, the strong dependence of the fireblight pathogen on capsules requires the capacity for EPS synthesis in all growth stages in order to escape plant defence reactions.     

Production of a Novel Extracellular Polysaccharide by Lactobacillus sake 0-1 and Characterization of the Polysaccharide

A novel exopolysaccharide (EPS) produced by Lactobacillus sake 0-1 (CBS 532.92) has been isolated and characterized. When the strain was grown on glucose, the produced EPS contained glucose and rhamnose in a molar ratio of 3:2 and the average molecular mass distribution (M(infm)) was determined at 6 x 10(sup6) Da. At a concentration of 1%, the 0-1 EPS had better viscosifying properties than xanthan gum when measured over a range of shear rates from 0 to 300 s(sup-1), while shear-thinning properties were comparable. Rheological data and anion-exchange chromatography suggested the presence of a negatively charged group in the EPS. Physiological parameters for optimal production of EPS were determined in batch fermentation experiments. Maximum EPS production was 1.40 g (middot) liter(sup-1), which was obtained when L. sake 0-1 had been grown anaerobically at 20(deg)C and pH 5.8. When cultured at lower temperatures, the EPS production per gram of biomass increased from 600 mg at 20(deg)C to 700 mg at 10(deg)C but the growth rate in the exponential phase decreased from 0.16 to 0.03 g (middot) liter(sup-1) (middot) h(sup-1). EPS production started in the early growth phase and stopped when the culture reached the stationary phase. Growing the 0-1 strain on different energy sources such as glucose, galactose, mannose, fructose, lactose, and sucrose did not alter the composition of the EPS produced.     

Links between morphology and physiology of Ganoderma lucidum in submerged culture for the production of exopolysaccharide

Ganoderma lucidum was grown in submerged culture in shake flasks on a medium containing peptone, yeast extract and glucose. In pre-cultures, inoculated from an agar-grown culture, morphological and metabolic events were linked: the pellets originally produced protuberances when glucose was present in the medium, although glucose was not consumed. The protuberances were then liberated into the medium as second-generation pellets, at which time glucose consumption began and the rate of exopolysaccharide (EPS) production increased. The synchrony between events was repeated in cultures fed with either glucose or peptone and yeast extract. In main cultures, inoculated from a 16-day-old pre-culture, the biomass concentration increased linearly, while glucose consumption and EPS production were initially slow but then accelerated. Protuberances were produced and liberated similarly to the pre-culture, but there was less synchrony amongst the pellets. When glucose was added to such a culture on day 10, an EPS concentration of 5.7 g L(-1) was achieved on day 13, this being the highest reliable EPS concentration yet reported for submerged culture of G. lucidum. We conclude that a greater understanding of the morphological and physiological events during the culture of G. lucidum will allow the proposal of culture strategies to improve EPS production.     

Yield production,chemical composition,and functional properties of emulsifier H28 synthesized by <Emphasis Type="Italic">Halomonas eurihalina </Emphasis>strain H-28 in media containing various hydrocarbons

Halomonas eurihalina strain H-28 is a moderately halophilic bacterium that produces an extracellular polysaccharide not only in media with glucose but also in media supplemented with hydrocarbons (n-tetradecane, n-hexadecane, n-octane, xylene, mineral light oil, mineral heavy oil, petrol, or crude oil). In this study we investigated yield production, chemical composition, viscosity, and emulsifying activity of exopolysaccharides (EPS) extracted from the different media used. The largest amounts of biopolymer were synthesized in media with glucose and n-hexadecane. Chemical composition varied with culture conditions; thus EPS from cultures grown in the presence of hydrocarbons had lower contents of carbohydrates and proteins than EPS from media with glucose. However, the percentages of uronic acids, acetyls, and sulfates were always higher than glucose EPS. Crude oil was the substrate most effectively emulsified. All EPS were capable of emulsifying crude oil more efficiently than the three control surfactants tested (Tween 20, Tween 80, and Triton X-100). All polymers gave low viscosity solutions. EPS H28 could be attractive for application in the oil industry and/or in bioremediation processes, bearing in mind not only its functional properties, but also the capacity of producer strain H-28 to grow in the presence of high salt concentrations and oil substrates.     

Variations in exopolysaccharide production by Rhizobium tropici

Rhizobium tropici, a legume-symbiont soil bacterium, is known for its copious production of exopolysaccharide (EPS). Many aspects of this organism’s growth and EPS production, however, remain uncharacterized, including the influence of environment and culturing conditions upon EPS. Here, we demonstrate that R. tropici EPS chemical composition and yield differ when grown with different substrates in a defined minimal medium in batch culture. Exopolysaccharide was quantified from R. tropici grown using arabinose, glucose, sucrose, mannitol, fructose, or glutamate as a sole carbon source. All tested substrates produced plenteous amounts of exopolysaccharide material. Variations in pH and carbon-to-nitrogen (C/N) ratio also resulted in assorted cell growth and exopolysaccharide production differences. We found that optimizing the C/N ratio has a greater impact upon R. tropici EPS production than upon R. tropici growth. A maximum EPS yield of 4.08 g/L was realized under optimized conditions, which is large even in comparison with other known rhizobia. We provide evidence that the chemical composition of R. tropici EPS can vary with changes to the growth environment. The composition of glucose-grown EPS contained rhamnose-linked residues that were not present in arabinose-grown EPS.     

The Ability of 2-Deoxyglucose to Promote the Lysis of Streptococcus bovis JB1 via a Mechanism Involving Cell Wall Stability

The non-metabolizable glucose analog, 2-deoxyglucose (2-DG), decreased the growth rate and optical density of Streptococcus bovis JB1 20%, but it had an even greater effect on stationary phase cultures. Control cultures receiving only glucose (2 mg/ml) lysed very slowly (<5% decline in optical density in 48 h), but cultures that had been grown with glucose and 2-DG (2 mg/ml each) lysed much faster (>85% decline in optical density in 48 h). Cultures that were treated with inhibitors that decreased intracellular ATP (sodium fluoride, nigericin, and valinomycin or tetrachlorosalicylanilide) or membrane potential (sodium fluoride, nigericin, and valinomycin, tetrachlorosalicylanilide, or phenylmethylsulfonyl fluoride) did not promote lysis. 2-DG had its greatest effect when it was added at inoculation. If 2-DG was added at later times, less lysis was observed, and cells that were given 2-DG just prior to stationary phase were unaffected. Cells that were grown with glucose and 2-DG were more susceptible to cell wall-degrading enzymes (lysozyme and mutanolysin) than cells that had been grown only with glucose, but sublethal doses of penicillin during growth did not promote lysis after the cells had reached stationary phase. The idea that 2-DG might be affecting autolytic activity was supported by the observation that cultures washed and resuspended in fresh medium with or without 2-DG lysed at a slower rate than cultures that were not centrifuged or were resuspended in the culture superntant. Received: 11 April 1997 / Accepted: 10 June 1997