Anisotropic nucleation growth of actin bundle: a model for determining the well-defined thickness of bundles

Biopolymers such as DNA, F-actins, and microtubules, which are highly charged, rodlike polyelectrolytes, are assembled into architectures with defined morphology and size by electrostatic interaction with multivalent cations (or polycations) in vivo and in vitro. The physical origin to determine their morphology and size is not clearly understood yet. Our results show that the actin bundle formation consists of two stages: the thickness of actin bundles is determined nearly at the initial stage, while the length of actin bundles is determined later on. It is also found that the thickness of actin bundles decreases with the increase of polycation-mediated attraction between F-actins. From these results, we propose the anisotropic nucleation-growth mechanism, in which the thickness of actin bundles is determined by critical nucleus size, whereas the length of actin bundles is determined by the concentration of free actins relative to nucleus concentration. Observing that polycations are concentrated in some sites of actin bundles, which are thought to be nucleation sites to initiate the formation of actin bundles, supports this model. This anisotropic nucleation-growth mechanism of actin bundles can be broadly applied to the self-assembly of rodlike polyelectrolytes.     

Polarity and motility of large polymer-actin complexes

The polarity of polymer-actin complexes obtained by mixing F-actin with synthetic polymers carrying positive charges such as poly(L-lysine), x,y-ionene bromide polymers, and poly(N-[3-(dimethylamino)propyl]acrylamide) (PDMAPAA-Q) have been investigated. Actin complexes formed with poly(L-lysine) and PDMAPAA-Q, which carry charges on their side chains, show a higher polarity than those formed with x,y-ionene bromide polymers, which have charges on their chain backbones. All these polymer-actin complex gels show motility on the surfaces coated with myosin by coupling to adenosine 5'-triphosphate hydrolysis. A linear correlation between the polarity of polymer-actin complex gels and the motility is observed.     

肌动蛋白存在于金黄地鼠(Mesocricetus auratus)联会复合体中

以金黄地鼠精母细胞为材料,以抗肌动蛋白抗体为探针,应用免疫荧光和免疫胶体金技术对ＳＣ有无肌动蛋白的问题进行了研究。免疫荧光结果表明：经抗肌动蛋白抗体标记后,减数分裂粗线期标本中ＳＣ发出特异性荧光,说明肌动蛋白存在于ＳＣ中。免疫电镜结果表明：实验组ＳＣ的胶体金颗粒密度远高于对照组的金颗粒密度,说明ＳＣ含有肌动蛋白。观察到,常染色体ＳＣ和性染色体ＳＣ以及偶线期和粗线期ＳＣ中都含有肌动蛋白,肌动蛋白分布于ＳＣ的端部和侧生组分上,代表肌动蛋白的胶体金颗粒在ＳＣ上往往成簇存在。对ＳＣ含有肌动蛋白的意义进行了讨论。     

Cytoplasmic actin and cochlear outer hair cell motility

Summary Isolated outer hair cells of the guinea pig lacking a cuticular plate and its associated infracuticular network retain the ability to shorten longitudinally and become thinner. Membrane ghosts lacking cytoplasm retain the cylindrical shape of the hair-cell, and although they do not shorten, they retain the ability to constrict and become thinner. These data suggest that cytoplasmic components are associated with outer hair-cell longitudinal shortening and that the lateral wall is responsible for maintaing cell shape and for constriction. Actin, a protein associated with the cytoskeleton and cell motility, is thought to be involved in outer hair-cell motility. To study its role, actin was localized in isolated outer hair cells by use of phalloidin labeled with fluorescein and antibodies against actin coupled to colloidal gold. In permeabilized guinea-pig hair cells stained with phalloidin, actin filaments are found along the lateral wall. In frozen-fixed hair cells actin filaments are distributed uniformly throughout the cytoplasm. Electron-microscopic studies show that antibodies label actin throughout the outer hair-cell body. Thus cytoplasmic actin filaments may provide the structural basis for the contraction-like events.     

Isolation of tropomyosin particles from cultured cell cytosol and their protein composition assay

The presence of an actin-binding protein, tropomyosin, in particles or protein complexes not bound with actin structures were found during an assay of structural rearrangements of actin cytoskeleton. To study the composition and properties of these protein complexes, a novel method of their isolation without destroying cytoskeleton structures has been elaborated. The protein composition of isolated tropomyosin particles was assessed by gel filtration, electrophoresis, and Western blotting. It was demonstrated that they are about 700-kDa multimolecular complexes. In addition to tropomyosin and actin, these complexes contained Hsp70, Hsp90, and myosin-9 identified by mass spectrometry. It was found that the deacetylase inhibitor, trichostatin A, which induced actin cytoskeleton rearrangements, changed the number of tropomyosin particles and caused redistribution of tropomyosin between cytosol and cytoskeleton. These results demonstrate that these multimolecular complexes may participate in the process of reorganization of actin microfilaments.     

Simultaneous localization and quantification of relative G and F actin content: optimization of fluorescence labeling methods.

Previous studies of fluorescence probes for labeling the monomeric actin pool have demonstrated lack of specificity. We have used quantitative analytical methods to assess the sensitivity and specificity of rhodamine DNAse I as a probe for monomeric (G) actin. The G-actin pool of attached or suspended fibroblasts was stabilized by ice-cold glycerol and MgCl2. Formaldehyde fixation was used to clamp the filamentous (F) actin pool. G- and F-actins were stained by rhodamine DNAse I and FITC-phalloidin, respectively. Confocal microscopy indicated that the G- and F-actins were spatially separate in substrate-attached cells. Flow cytometry and fluorescence spectrophotometry demonstrated low co-labeling of the separate actin pools, although measureable background binding of rhodamine DNAse I was detectable. Estimates of the extent of actin polymerization after trypsinization demonstrated reciprocal changes of monomeric and filamentous actins, consistent with the formation of a perinuclear array of F-actin. The labeling and quantitation methods were also sufficiently sensitive to detect cell type-dependent variations in actin content. Dual labeling of cells with rhodamine DNAse I and FITC-phalloidin may provide a simple and direct method to image and quantify actin rearrangement in individual cells.     

Mechanism of lateral movement of filopodia and radial actin bundles across neuronal growth cones

We investigated the motion of filopodia and actin bundles in lamellipodia of motile cells, using time-lapse sequences of polarized light images. We measured the velocity of retrograde flow of the actin network and the lateral motion of filopodia and actin bundles of the lamellipodium. Upon noting that laterally moving filopodia and actin bundles are always tilted with respect to the direction of retrograde flow, we propose a simple geometric model for the mechanism of lateral motion. The model establishes a relationship between the speed of lateral motion of actin bundles, their tilt angle with respect to the direction of retrograde flow, and the speed of retrograde flow in the lamellipodium. Our experimental results verify the quantitative predictions of the model. Furthermore, our observations support the hypothesis that lateral movement of filopodia is caused by retrograde flow of tilted actin bundles and by their growth through actin polymerization at the tip of the bundles inside the filopodia. Therefore we conclude that the lateral motion of tilted filopodia and actin bundles does not require a separate motile mechanism but is the result of retrograde flow and the assembly of actin filaments and bundles near the leading edge of the lamellipodium.     

Arabidopsis FIMBRIN5, an actin bundling factor, is required for pollen germination and pollen tube growth

Actin cables in pollen tubes serve as molecular tracks for cytoplasmic streaming and organelle movement and are formed by actin bundling factors like villins and fimbrins. However, the precise mechanisms by which actin cables are generated and maintained remain largely unknown. Fimbrins comprise a family of five members in Arabidopsis thaliana. Here, we characterized a fimbrin isoform, Arabidopsis FIMBRIN5 (FIM5). Our results show that FIM5 is required for the organization of actin cytoskeleton in pollen grains and pollen tubes, and FIM5 loss-of-function associates with a delay of pollen germination and inhibition of pollen tube growth. FIM5 decorates actin filaments throughout pollen grains and tubes. Actin filaments become redistributed in fim5 pollen grains and disorganized in fim5 pollen tubes. Specifically, actin cables protrude into the extreme tips, and their longitudinal arrangement is disrupted in the shank of fim5 pollen tubes. Consequently, the pattern and velocity of cytoplasmic streaming were altered in fim5 pollen tubes. Additionally, loss of FIM5 function rendered pollen germination and tube growth hypersensitive to the actin-depolymerizing drug latrunculin B. In vitro biochemical analyses indicated that FIM5 exhibits actin bundling activity and stabilizes actin filaments. Thus, we propose that FIM5 regulates actin dynamics and organization during pollen germination and tube growth via stabilizing actin filaments and organizing them into higher-order structures.     

The local cytomechanical properties of growing pollen tubes correspond to the axial distribution of structural cellular elements

Morphological studies of pollen tubes have shown that the configuration of structural cellular elements differs between the growing apex and the distal part of the cell. This polarized cellular organization reflects the highly anisotropic growth behavior of this tip growing cell. Accordingly, it has frequently been postulated that physical properties of pollen tubes such as cell wall plasticity should show anisotropic distribution, but no experimental evidence for this has been published hitherto. Using micro-indentation techniques, we quantify pollen tube resistance to lateral deformation forces and analyze its visco-elasticity as a function of distance from the growing apex. Our studies reveal that cellular stiffness is significantly higher at the distal portion of the cell. This part of the cell is also completely elastic, whereas the apex shows a visco-elastic component upon deformation. To relate these data to the architecture of the particular pollen tube investigated in this study, Papaver rhoeas, we analyzed the distribution of cell wall components such as pectin, callose, and cellulose as well as the actin cytoskeleton in this cell using fluorescence label. Our data revealed that, in particular, the degree of pectin methyl esterification and the configuration of the actin cytoskeleton correlate well with the distribution of the physical properties on the longitudinal axis of the cell. This suggests a role for these cellular components in the determination of the cytomechanics of pollen tubes.     

SVS II--an androgen-dependent actin-binding glycoprotein in rat semen.

Rat seminal vesicles and the lateral prostate secrete a glycoprotein designated as SVS II in an androgen-dependent manner. SVS II, which has a M(r) of 49,000 and a pI of 10.5, is an actin-binding protein. G- and F-actins cosediment with SVS II at a ratio of 2:1 (actin:SVS II). SVS II affects the kinetics of actin polymerization in the same way as do barbed end capping proteins. Interaction with actin is specific for the skeletal and cardiac muscle isoforms and there is no corresponding interaction with cytoplasmic actins. The binding site is close to the C-terminus of actin. Monospecific polyclonal antibodies directed against the N-terminus of actin cross-react with SVS II, but there is no cross-reaction by a monoclonal antibody directed against a C-terminal epitope on actin. Recent sequence analysis of SVS II shows a sequence of about 14 residues that is repeated 13 times between residues 86 and 298. The consensus sequence based on these repeats is homologous to residues 10 to 25 of actin; this may account for the immunological cross-reactivity. Like actin, SVS II binds and inhibits the activity of DNase I, but SVS II has no effect on the ATPase activity of myosin subfragment 1. Thus, SVS II is an actin-binding protein which retains some properties of actin itself.     

Focal loss of actin bundles causes microtubule redistribution and growth cone turning

It is commonly believed that growth cone turning during pathfinding is initiated by reorganization of actin filaments in response to guidance cues, which then affects microtubule structure to complete the turning process. However, a major unanswered question is how changes in actin cytoskeleton are induced by guidance cues and how these changes are then translated into microtubule rearrangement. Here, we report that local and specific disruption of actin bundles from the growth cone peripheral domain induced repulsive growth cone turning. Meanwhile, dynamic microtubules within the peripheral domain were oriented into areas where actin bundles remained and were lost from areas where actin bundles disappeared. This resulted in directional microtubule extension leading to axon bending and growth cone turning. In addition, this local actin bundle loss coincided with localized growth cone collapse, as well as asymmetrical lamellipodial protrusion. Our results provide direct evidence, for the first time, that regional actin bundle reorganization can steer the growth cone by coordinating actin reorganization with microtubule dynamics. This suggests that actin bundles can be potential targets of signaling pathways downstream of guidance cues, providing a mechanism for coupling changes in leading edge actin with microtubules at the central domain during turning.     

Cortactin (CTTN), N-WASP (WASL), and clathrin (CLTC) are present at podosome-like tubulobulbar complexes in the rat testis

Tubulobulbar complexes are actin filament-rich plasma membrane protrusions that form at intercellular junctions in the seminiferous epithelium of the mammalian testis. They are proposed to internalize intact junctions during sperm release and during the translocation of spermatocytes through basal junction complexes between neighboring Sertoli cells. Tubulobulbar complexes morphologically resemble podosomes found at cell/substrate attachments in other systems. In this study we probe apical tubulobulbar complexes in fixed epithelial fragments and fixed frozen sections of rat testis for two key actin-related components found at podosomes, and for the endocytosis-related protein clathrin. N-WASP and cortactin, two regulators of actin network assembly known to be components of podosomes, are concentrated at tubulobulbar complexes. Clathrin-positive structures occur in Sertoli cell regions containing tubulobulbar complexes when analyzed by immunofluorescence microscopy and occur at the ends of the complexes when evaluated by immunoelectron microscopy. Our results are consistent with the conclusion that tubulobulbar complexes are podosome-like structures. We propose that the formation of tubulobulbar complexes may be clathrin initiated and that their growth is due to the dendritic assembly of a membrane-related actin network.     

Mobility of Molecular Motors Regulates Contractile Behaviors of Actin Networks

Cells generate mechanical forces primarily from interactions between F-actin, cross-linking proteins, myosin motors, and other actin-binding proteins in the cytoskeleton. To understand how molecular interactions between the cytoskeletal elements generate forces, a number of in vitro experiments have been performed but are limited in their ability to accurately reproduce the diversity of motor mobility. In myosin motility assays, myosin heads are fixed on a surface and glide F-actin. By contrast, in reconstituted gels, the motion of both myosin and F-actin is unrestricted. Because only these two extreme conditions have been used, the importance of mobility of motors for network behaviors has remained unclear. In this study, to illuminate the impacts of motor mobility on the contractile behaviors of the actin cytoskeleton, we employed an agent-based computational model based on Brownian dynamics. We find that if motors can bind to only one F-actin like myosin I, networks are most contractile at intermediate mobility. In this case, less motor mobility helps motors stably pull F-actins to generate tensile forces, whereas higher motor mobility allows F-actins to aggregate into larger clustering structures. The optimal intermediate motor mobility depends on the stall force and affinity of motors that are regulated by mechanochemical rates. In addition, we find that the role of motor mobility can vary drastically if motors can bind to a pair of F-actins. A network can exhibit large contraction with high motor mobility because motors bound to antiparallel pairs of F-actins can exert similar forces regardless of their mobility. Results from this study imply that the mobility of molecular motors may critically regulate contractile behaviors of actin networks in cells.     

Nucleoplasmic beta-actin exists in a dynamic equilibrium between low-mobility polymeric species and rapidly diffusing populations

Beta-actin, once thought to be an exclusively cytoplasmic protein, is now known to have important functions within the nucleus. Nuclear beta-actin associates with and functions in chromatin remodeling complexes, ribonucleic acid polymerase complexes, and at least some ribonucleoproteins. Proteins involved in regulating actin polymerization are also found in the interphase nucleus. We define the dynamic properties of nuclear actin molecules using fluorescence recovery after photobleaching. Our results indicate that actin and actin-containing complexes are reduced in their mobility through the nucleoplasm diffusing at approximately 0.5 microm2 s(-1). We also observed that approximately 20% of the total nuclear actin pool has properties of polymeric actin that turns over rapidly. This pool could be detected in endogenous nuclear actin by using fluorescent polymeric actin binding proteins and was sensitive to drugs that alter actin polymerization. Our results validate previous reports of polymeric forms of nuclear actin observed in fixed specimens and reveal that these polymeric forms are very dynamic.     

FILAMENT ULTRASTRUCTURE AND ORGANIZATION IN VERTEBRATE SMOOTH MUSCLE : Contraction Hypothesis Based on Localization of Actin and Myosin

Using a variety of preparative techniques for electron microscopy, we have obtained evidence for the disposition of actin and myosin in vertebrate smooth muscle. All longitudinal myofilaments seen in sections appear to be actin. Previous reports of two types of longitudinal filaments in sections are accounted for by technical factors, and by differentiated areas of opacity along individual filaments. Dense bodies with actin emerging from both ends have been identified in homogenates, and resemble Z discs from skeletal muscle (Huxley, 1963). In sections, short, dark-staining lateral filaments 15–25 A in diameter link adjacent actin filaments within dense bodies and in membrane dense pataches. They appear homologous with Z-disc filaments. Similar lateral filaments connect actin to plasma membrane. Dense bodies and dense patches, therefore, are attachment points and denote units analogous to sarcomeres. In glycerinated, methacrylate-embedded sections, lateral processes different in length and staining characteristics from lateral filaments in dense bodies exist at intervals along actin filaments. These processes are about 30 A wide and resemble heavy meromyosin from skeletal muscle. They also resemble heads of whole molecules of myosin in negatively stained material from gizzard homogenates. Intact single myosin molecules and dimers have been found, both free and attached to actin, even in media of very low ionic strength. Myosin can, therefore, exist in relatively disaggregated form. Models of the contraction mechanism of smooth muscle are proposed. The unique features are: (1) Myosin exists as small functional units. (2) Movement occurs by interdigitation and sliding of actin filaments.     

An ionic–chemical–mechanical model for muscle contraction

The dynamic process underlying muscle contraction is the parallel sliding of thin actin filaments along an immobile thick myosin fiber powered by oar‐like movements of protruding myosin cross bridges (myosin heads). The free energy for functioning of the myosin nanomotor comes from the hydrolysis of ATP bound to the myosin heads. The unit step of translational movement is based on a mechanical‐chemical cycle involving ATP binding to myosin, hydrolysis of the bound ATP with ultimate release of the hydrolysis products, stress‐generating conformational changes in the myosin cross bridge, and relief of built‐up stress in the myosin power stroke. The cycle is regulated by a transition between weak and strong actin–myosin binding affinities. The dissociation of the weakly bound complex by addition of salt indicates the electrostatic basis for the weak affinity, while structural studies demonstrate that electrostatic interactions among negatively charged amino acid residues of actin and positively charged residues of myosin are involved in the strong binding interface. We therefore conjecture that intermediate states of increasing actin–myosin engagement during the weak‐to‐strong binding transition also involve electrostatic interactions. Methods of polymer solution physics have shown that the thin actin filament can be regarded in some of its aspects as a net negatively charged polyelectrolyte. Here we employ polyelectrolyte theory to suggest how actin–myosin electrostatic interactions might be of significance in the intermediate stages of binding, ensuring an engaged power stroke of the myosin motor that transmits force to the actin filament, and preventing the motor from getting stuck in a metastable pre‐power stroke state. We provide electrostatic force estimates that are in the pN range known to operate in the cycle.     

Thickness distribution of actin bundles in vitro

Bundles of filamentous actin form the primary building blocks of a broad range of cytoskeletal structures, including filopodia, stereocilia and microvilli. In each case, the cell uses specific associated proteins to tailor the dynamics, dimensions and mechanical properties of the bundles to suit a specific cellular function. While the length distribution of actin bundles was extensively studied, almost nothing is known about the thickness distribution. Here, we use high-resolution cryo-TEM to measure the thickness distribution of actin/fascin bundles, in vitro. We find that the thickness distribution has a prominent peak, with an exponential tail, supporting a scenario of an initial fast formation of a disc-like nucleus of short actin filaments, which only later elongates. The bundle thicknesses at steady state are found to follow the distribution of the initial nuclei indicating that no lateral coalescence occurs. Our results show that the distribution of bundles thicknesses can be controlled by monitoring the initial nucleation process. In vivo, this is done by using specific regulatory proteins complexes. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Effects of specific chemical modification of actin.

G-actin has been nitrated with tetranitromethane in conditions that lead to the modification of one tyrosine residue. The reactive residue was found by earlier workers to be Tyr-69. The nitrated actin is conformationally similar to native G-actin, as judged by sedimentation velocity and circular dichroism analysis. A small proportion only is in the form of covalently linked dimers and trimers. The nitrated G-actin will polymerise to form filaments, indistinguishable in the electron microscope from those of native F-actin, but the polymerisation process is slower. Reduction of the nitrophenol group to the corresponding aminophenol leaves the properties of the protein in respect of polymerisation unchanged. When a dansyl group is introduced at the same point, however, the ability of the actin to polymerise is lost. The nitrated actin and its reduced counterpart will also bind heavy meromyosin, and the characteristic arrowhead formation of the bound molecules along the filaments can be seen in the electron microscope. Neither of the modified F-actins, however, significantly activates or inhibits the myosin ATPase activity. The fluorescence of nitrated actin is strongly quenched through the presence of the nitrophenol chromophore. In soluble complexes with heavy meromyosin the fluorescence is indistinguishable from the sum of the separate contributions of the two protein components. There is thus no measurable excitation transfer between any tryptophan residues on the myosin heads, such as that inferred to be present in the ATPase site, and the nitrotyrosine in position 69 of the actin sequence. Implications of this observation are considered in relation to the different interaction sites in myosin and in actin. The activation of heavy meromyosin ATPase by copolymers containing actin and nitroactin in different proportions has been measured, and is not proportional to the fraction of native actin. The results are consistent with the view that the function of actomyosin depends on the interaction of the myosin heads with more than one actin subunit.     

Two-Photon Correlation Spectroscopy in Single Dendritic Spines Reveals Fast Actin Filament Reorganization during Activity-Dependent Growth

Two-photon fluorescence correlation spectroscopy (2P-FCS) within single dendritic spines of living hippocampal pyramidal neurons was used to resolve various subpopulations of mobile F-actin during activity-dependent structural changes such as potentiation induced spine head growth. Two major classes of mobile F-actin were discovered: very dynamic and about a hundred times less dynamic F-actin. Spine head enlargement upon application of Tetraethylammonium (TEA), a protocol previously used for the chemical induction of long-term potentiation (cLTP) strictly correlated to changes in the dynamics and filament numbers in the different actin filament fractions. Our observations suggest that spine enlargement is governed by a mechanism in which longer filaments are first cut into smaller filaments that cooperate with the second, increasingly dynamic shorter actin filament population to quickly reorganize and expand the actin cytoskeleton within the spine head. This process would allow a fast and efficient spine head enlargement using a major fraction of the actin filament population that was already present before spine head growth.     

The conserved C-terminal I/LWEQ module targets Talin1 to focal adhesions

The cytoskeletal protein Talin1 is a critical link between integrins and the actin cytoskeleton, where it is required for the structural and signaling functions of integrin-containing adhesion complexes. However, the elements in Talin1 that are responsible for localizing it to adhesion complexes are not known. In this report we have used a series of constructs based on the modular structure of Talin1 to determine the structural elements that specify the subcellular localization of Talin1. We show that the conserved actin-binding I/LWEQ module at the C-terminus of Talin1 is necessary and sufficient for targeting to focal adhesion complexes. We also used truncation and site-directed mutagenesis to demonstrate that this novel targeting function correlates with, but is separable from, the actin-binding properties of the Talin1 I/LWEQ module. In addition, we have shown that focal adhesion targeting, unlike actin binding, is not conserved among I/LWEQ module proteins. Finally, we have demonstrated that the subcellular localization of the Talin1 I/LWEQ module is regulated by an intrasteric interaction with an upstream alpha-helix, suggesting that both the actin binding and adhesion-targeting elements are masked in full-length Talin1. Our results define a novel role for the I/LWEQ module as the primary adhesion-complex targeting determinant of Talin1 and suggest that pathways that can relieve inhibition of I/LWEQ module function will be important for regulating the structural and signaling properties of adhesion complexes.