Quantifying environmental impacts of primary aluminum ingot production and consumption : A trade‐linked multilevel life cycle assessment

Aluminum is one of the most used metals of modern civilization, but its production is responsible for multiple adverse environmental impacts mostly due to aluminum smelting and alumina refining. Previous life cycle assessments (LCAs) have aggregated alumina refining into a single global process even though refining processes are highly spatially differentiated and alumina is highly traded. Our work improves on existing LCAs of primary aluminum by including temporal and spatial differentiation in alumina refining and aluminum smelting and trade of alumina and primary aluminum ingots. We build country‐level impact factors for primary aluminum ingot production and consumption, with the spatial distributions of environmental impacts, from 2000 to 2017, by combining a trade‐linked multilevel material flow analysis with LCA using six midpoint categories of the ReCiPe method. Climate change impacts of primary aluminum production range from 4.5 to 33.6 kg CO₂ eq./kg. We then estimate the life cycle production‐ and consumption‐based environmental burdens of primary aluminum ingot by country. High spatial variations exist among impact factors of primary aluminum production. Aggregating the alumina refining processes into a single process may cause important deviations on the impact factors of primary aluminum ingot production (up to 38% differences in climate change impacts). Finally, we estimate the climate change impacts of worldwide primary aluminum production at 1.2 Gt CO₂ eq. in 2017 and untangle their spatial origins, localized at 70% in China. Overall, we show the importance of spatial differentiation for highly traded products that rely on highly traded inputs and offer recommendations for LCA practitioners. This article met the requirements for a gold‐gold JIE data openness badge described at http://jie.click/badges .     

Development of an environmental impact reduction strategy for Australia's Antarctic infrastructure

In this article, we first describe aspects of the environmental impact reduction strategy that was developed in conjunction with a life cycle assessment undertaken for the operations necessary to support Australia's largest Antarctic research station, Casey Station. The article then identifies future research and operational improvement opportunities for the Australian Antarctic Division, who is responsible for Australia's presence in Antarctica. These insights are mapped against knowledge, treaties, plans, and policies framing how the Australian Antarctic Division operates on the southern continent, making operational planning from the strategy relevant and actionable. The article concludes by posing recommendations, for future environmental management practice, that cover making improvements to data quality collection, undertaking a strategic approach, utilizing a new ice breaker, and facilitating behavior change via engagement and active support of staff.     

Material and Energy Flows and Environmental Impacts of the Internet in Switzerland

The Internet leads to material and energy consumption as well as various environmental impacts on both the regional and global scale. Yet, assessments of the Internet's energy consumption and resulting greenhouse gas emissions are still rare, and assessments of material flows and further environmental impacts are virtually non‐existent. This article investigates material flows, the direct energy consumption during the use phase, as well as environmental impacts linked to the service, “Internet in Switzerland.” In our model, the service, Internet in Switzerland, is divided into various Internet participant categories. All devices used to access or provide Internet services are merged in a limited number of equipment families and, as such, included in an inventory of the existing infrastructure (stock). Based on this inventory, a material flow analysis (MFA) is performed, which includes the current stock as well as flows resulting from growth and disposal. The direct energy consumption for the operation of the infrastructure is quantified. Environmental impacts are calculated with a life cycle assessment approach, using the ecoinvent database and the software, SimaPro, applying four different methods. The MFA results in a 2009 stock of 98,100 tonnes. Approximately 4,130 gigawatt hours per year, or 7% of the total Swiss electricity consumption, were used in 2009 to operate the Swiss infrastructure. The environmental impacts caused during the production and use phases vary significantly depending on the assessment method chosen. The disposal phase had mainly positive impacts as a result of material recovery.     

Assessment of Environmental Impacts of an Aging and Stagnating Water Supply Pipeline Network

Aging urban infrastructure is a common phenomenon in industrialized countries. The urban water supply pipeline network in the city of Oslo is an example. Even as it faces increasing operational, maintenance, and management challenges, it needs to better its environmental performance by reducing, for instance, the associated greenhouse gas emissions. In this article the authors examine the environmental life cycle performance of Oslo's water supply pipelines by analyzing annual resource consumption and emissions as well as life cycle assessment (LCA) impact potentials over a period of 16 years, taking into account the production/manufacture, installation, operation, maintenance, rehabilitation, and retirement of pipelines. It is seen that the water supply pipeline network of Oslo has already reached a state of saturation on a per capita basis, that is, it is not expanding any more relative to the population it serves, and the stock is now rapidly aging. This article is part of a total urban water cycle system analysis for Oslo, and analyzes more specifically the environmental impacts from the material flows in the water distribution network, examining six environmental impact categories using the SimaPro (version 7.1.8) software, Ecoinvent database, and the CML 2001 (version 2.04) methodology. The long‐term management of stocks calls for a strong focus on cost optimization, energy efficiency, and environmental friendliness. Global warming and abiotic depletion emerge as the major impact categories from the water pipeline system, and the largest contribution is from the production and installation phases and the medium‐size pipelines in the network.     

Environmental Impact Assessment of Wood Use in Japan through 2050 Using Material Flow Analysis and Life Cycle Assessment

In this study, we used material flow analysis and life cycle assessment to quantify the environmental impacts and impact reductions related to wood consumption in Japan from 1970 to 2013. We then conducted future projections of the impacts and reductions until 2050 based on multiple future scenarios of domestic forestry, wood, and energy use. An impact assessment method involving characterization, damage assessment, and integration with a monetary unit was used, and the results were expressed in Japanese yen (JPY). We found that environmental impacts from paper consumption, such as climate change and urban air pollution, were significant and accounted for 56% to 83% of the total environmental impacts between 1970 and 2013. Therefore, reductions of greenhouse gas, nitrogen oxide, and sulfur oxide emissions from paper production would be an effective measure to reduce the overall environmental impacts. An increase in wood use for building construction, civil engineering, furniture materials, and energy production could lead to reductions of environmental impacts (via carbon storage, material substitution, and fuel substitution) amounting to 357 billion JPY in 2050, which is equivalent to 168% of the 2013 levels. Particularly, substitution of nonwooden materials, such as cement, concrete, and steel, with wood products in building construction could significantly contribute to impact reductions. Although an increase of wood consumption could reduce environmental impacts, such as climate change, resource consumption, and urban air pollution, increased wood consumption would also be associated with land‐use impacts. Therefore, minimizing land transformations from forest to barren land will be important.     

Comparison of Tools for Quantifying the Environmental Performance of an Urban Territory

To support effective urban policies aimed at decreasing the environmental impacts of cities, it is important to develop robust tools for accounting those impacts. Environmentally extended input‐output analysis (EEIOA) is among the most used tools for this purpose, allowing the quantification of both direct and indirect impacts. Life cycle assessment (LCA) is also a holistic and comprehensive tool that accounts for direct and indirect impacts—but its application to cities is still very recent. This study aims at applying EEIOA and LCA to the municipality of Aveiro (Portugal) in order to compare the outcomes of the two tools in terms of total impacts (climate change and fossil fuel depletion) and hotspots (sectors/products contributing most to the impacts), to identify limitations and advantages of the tools when applied to Aveiro, and to illustrate how LCA can be applied to cities. The total impacts estimated with LCA and EEIOA were similar and the hotspots were also the same: transports, food, construction, and electricity. However, the relative contribution of some sectors was very different in the two tools due to methodological differences mainly in system boundaries, type of activities or products considered in each sector, and geographical coverage of impact data. This study concludes that the analyzed tools can provide complementary results to support decision making concerning urban planning and management.     

The influence of consumer behavior on the environmental footprint of passenger car tires

Understanding the influence of consumer behavior on the life cycle of products can provide further insights into effective mitigation strategies. Here, we developed a stochastic model to quantify the influence of consumer behavior on midpoint and endpoint impacts of European passenger car tires. The life cycle included resource extraction, production, use, and end-of-life stages of a passenger car tire with a functional unit of driving 50,000 km. The combined influence of variability in the lifetime, rolling resistance, size and inflation pressure of the tire, and mass and engine efficiency of the car on a range of environmental footprints was assessed via Monte Carlo simulations. We found that differences in consumer behavior can change the environmental impacts of tires with a factor 1.6 to 2.1 (95th/5th percentile). Environmental savings over the life cycle of tires are effectively achievable by stimulating the use of smaller cars and fuel-efficient tires with longer lifetimes. We found that a shift in consumer behavior specifically related to tires can result in mitigations of the tire's life cycle impacts ranging from 13% for human toxicity to 26% for climate change. Our findings show that a detailed variability analysis can provide case-specific and realistic recommendations to mitigate environmental footprints.     

The Water Withdrawal Footprint of Energy Supply to Cities

Water footprints traditionally estimate water lost as a result of evapotranspiration (or otherwise unavailable for downstream uses) associated with producing a certain good, and the same embodied in trade across regions is used to estimate regional and national water footprints. These footprints, however, do not address risk posed to city energy supplies characterized by insufficient streamflow to support energy production, such as cooling water intake (e.g., withdrawals) at thermoelectric power plants. Water withdrawal intensity factors for producing goods and services are being developed at the national scale, but lack sufficient spatial resolution to address these types of water‐energy challenges facing cities. To address this need, this article presents a water withdrawal footprint for energy supply (WWFES) to cities and places it in the context of other water footprints defined in the literature. Analysis of electricity use versus electricity generation in 43 U.S. cities highlights the need for developing WWFES to estimate risks to transboundary city energy supplies resulting from water constraints. The magnitude of the WWFES is computed for Denver, Colorado, and compared to the city's direct use of water to offer perspective. The baseline WWFES for Denver is found to be 66% as large as all direct water uses in the city combined (mean estimate). Minimum, mean, and maximum estimates are computed to demonstrate sensitivity of the WWFES to selection of water withdrawal intensity factors. Finally, scenario analysis explores the effect of energy technology and energy policy choices in shaping the future water footprint of cities.     

Energy Requirements of Carbon Nanoparticle Production

Energy requirements for fullerene and nanotube synthesis are calculated from literature data and presented for a number of important production processes, including fluidized bed and floating catalyst chemical vapor deposition (CVD), carbon monoxide disproportionation, pyrolysis, laser ablation, and electric arc and solar furnace synthesis. To produce data for strategic forward‐looking assessments of the environmental implications of carbon nanoparticles, an attempt is made to balance generality with sufficient detail for individual processes, a trade‐off that will likely be inherent in the analysis of many nanotechnologies. Critical energy and production issues are identified, and potential improvements in industrial‐scale processes are discussed. Possible interactions with industrial ecosystems are discussed with a view toward integrating synthesis to mitigate the impacts of large‐scale carbon nanoparticle manufacture. Carbon nanoparticles are found to be highly energy‐intensive materials, on the order of 2 to 100 times more energy‐intensive than aluminum, even with idealized production models.     

Backlighting the European Indium Recycling Potentials

With increased understanding of the effects of human activities on the environment and added awareness of the increasing societal value of natural resources, researchers have begun to focus on the characterization of elemental cycles. Indium has captured significant attention due to the potential for supply shortages and nonexistent recycling at end of life. Such a combination of potentially critical features is magnified for countries that depend on imports of indium, notably many European countries. With the aims of analyzing the dynamics of material flows and of estimating the magnitude of secondary indium sources available for recycling, the anthropogenic indium cycle in Europe has been investigated by material flow analysis. The results showed that the region is a major consumer of finished goods containing indium, and the cumulative addition of indium in urban mines was estimated at about 500 tonnes of indium. We discuss these results from the perspective of closing the metal cycle in the region. Securing access to critical raw materials is a priority for Europe, but the preference for recycling metal urban mines risks to remain only theoretical for indium unless innovations in waste collection and processing unlock the development of technologies that are economically feasible and environmentally sustainable.     

Carbon and Water Footprints and Energy Use of Greenhouse Tomato Production in Northern Italy

This study reports on the carbon, water, and energy footprints of tomatoes grown in a greenhouse in Northern Italy and two possible future variations of heating and carbon dioxide (CO₂) fertilization on the current setup. The heat supply in place, consisting of natural gas (NG) and canola oil combustion, is compared to cogeneration and incineration of municipal solid waste for heating and CO₂ from industrial exhaust for fertilization. As a benchmark, the current system is also compared to a conventional system, in which heat is delivered solely based on NG. Each kilogram (kg) of fresh tomatoes (“Cuore di Bue” variety) produced in the current greenhouse emits 2.28 kg CO₂ equivalents (eq) and uses 95.5 megajoules (MJ) eq energy and 122 liters (L) of water. Relative to the system in place, the carbon footprint (CF) is 57.5% and 18% higher with conventional NG heating and cogeneration and is 40% lower with waste valorization. Further, 33%, 55%, and 63% less energy and 9%, 96%, and 14% less water are used in the conventional, cogeneration, and waste valorization scenarios, respectively. This confirms that there are multiple strategies to reduce the impact of the tomato production under consideration.     

A Step Towards a General Framework for Consequential Life Cycle Assessment

At the core of consequential life cycle assessment (CLCA) is a model of the economic system of which the activity that motivates the CLCA is a part. While there are several applications of CLCA in the literature, there does not appear to exist a formal, general mathematical framework. To address this gap, this article presents a general multi‐market equilibrium framework, which could be adapted to an arbitrary level of complexity depending on the context and data availability. A general expression for total pollution (of a given type) is derived, which highlights different factors that determine the impact on emissions. It is then illustrated how microeconomic theory can help predict the direction of price and quantity changes for each commodity within the modeled system simply based on an activity's relationship to the ultimate activity or service, which motivates the CLCA. The steps involved in converting the multi‐market framework to general equilibrium are also discussed.     

Tracking Construction Material over Space and Time: Prospective and Geo‐referenced Modeling of Building Stocks and Construction Material Flows

Construction material plays an increasingly important role in the environmental impacts of buildings. In order to investigate impacts of materials on a building level, we present a bottom‐up building stock model that uses three‐dimensional and geo‐referenced building data to determine volumetric information of material stocks in Swiss residential buildings. We used a probabilistic modeling approach to calculate future material flows for the individual buildings. We investigated six scenarios with different assumptions concerning per‐capita floor area, building stock turnover, and construction material. The Swiss building stock will undergo important structural changes by 2035. While this will lead to a reduced number in new constructions, material flows will increase. Total material inflow decreases by almost half while outflows double. In 2055, the total amount of material in‐ and outflows are almost equal, which represents an important opportunity to close construction material cycles. Total environmental impacts due to production and disposal of construction material remain relatively stable over time. The cumulated impact is slightly reduced for the wood‐based scenario. The scenario with more insulation material leads to slightly higher material‐related emissions. An increase in per‐capita floor area or material turnover will lead to a considerable increase in impacts. The new modeling approach overcomes the limitations of previous bottom‐up building models and allows for investigating building material flows and stocks in space and time. This supports the development of tailored strategies to reduce the material footprint and environmental impacts of buildings and settlements.     

Life cycle assessment of emerging technologies at the lab scale: The case of nanowire‐based solar cells

Nanomaterials are expected to play an important role in the development of sustainable products. The use of nanomaterials in solar cells has the potential to increase their conversion efficiency. In this study, we performed a life cycle assessment (LCA) for an emerging nanowire‐based solar technology. Two lab‐scale manufacturing routes for the production of nanowire‐based solar cells have been compared—the direct growth of GaInP nanowires on silicon substrate and the growth of InP nanowires on native substrate, peel off, and transfer to silicon substrate. The analysis revealed critical raw materials and processes of the current lab‐scale manufacturing routes such as the use of trifluoromethane (CHF₃), gold, and an InP wafer and a stamp, which are used and discarded. The environmental performance of the two production routes under different scenarios has been assessed. The scenarios include the use of an alternative process to reduce the gold requirements—electroplating instead of metallization, recovery of gold, and reuse of the InP wafer and the stamp. A number of suggestions, based on the LCA results—including minimization of the use of gold and further exploration for upscaling of the electroplating process, the increase in the lifetimes of the wafer and the stamp, and the use of fluorine‐free etching materials—have been communicated to the researchers in order to improve the environmental performance of the technology. Finally, the usefulness and limitations of lab‐scale LCA as a tool to guide the sustainable development of emerging technologies are discussed.     

The Environmental Importance of Energy Use in Chemical Production

In many cases, policy makers and laymen perceive harmful emissions from chemical plants as the most important source of environmental impacts in chemical production. As a result, regulations and environmental efforts have tended to focus on this area. Concerns about energy use and greenhouse gas emissions, however, are increasing in all industrial sectors. Using a life cycle assessment (LCA) approach, we analyzed the full environmental impacts of producing 99 chemical products in Western Europe from cradle to factory gate. We applied several life cycle impact assessment (LCIA) methods to cover various impact areas. Our analysis shows that for both organic and inorganic chemical production in industrial countries, energy‐related impacts often represent more than half and sometimes up to 80% of the total impacts, according to a range of LCIA methods. Resource use for material feedstock is also important, whereas direct emissions from chemical plants may make up only 5% to 10% of the total environmental impacts. Additionally, the energy‐related impacts of organic chemical production increase with the complexity of the chemicals. The results of this study offer important information for policy makers and sustainability experts in the chemical industry striving to reduce environmental impacts. We identify more sustainable energy production and use as an important option for improvements in the environmental profile of chemical production in industrial countries, especially for the production of advanced organic and fine chemicals.     

Enhancing the Adoption of Life Cycle Assessment by Small and Medium Enterprises Grouped in an Industrial Cluster: A Case Study of the Tanning Cluster in Tuscany (Italy)

Greenhouse gas emissions from small and medium enterprises (SMEs) account for 70% of the industrial pollution in the European Union. Owing to limited economic and human resources, only a few SMEs start procedures to evaluate the environmental impact of processes and products through life cycle assessment (LCA). In this work, a cluster life cycle assessment (Cluster‐LCA) is proposed as an instrument for the diffusion and realization of LCA analysis in clustered SMEs. This methodology is illustrated with a case study in the tanning cluster in Tuscany. The different characteristics of the methodology are analyzed by identifying the intrinsic strengths, weaknesses, opportunities, and threats. The application of this methodology in a particular cluster is then discussed in order to gather some helpful insight for the application of this methodology in different clusters.     

Environmental and economic impacts of solar‐powered integrated greenhouses

Greenhouse vegetable production plays a vital role in providing year‐round fresh vegetables to global markets, achieving higher yields, and using less water than open‐field systems, but at the expense of increased energy demand. This study examines the life cycle environmental and economic impacts of integrating semitransparent organic photovoltaics (OPVs) into greenhouse designs. We employ life cycle assessment to analyze six environmental impacts associated with producing greenhouse‐grown tomatoes in a Solar PoweRed INtegrated Greenhouse (SPRING) compared to conventional greenhouses with and without an adjacent solar photovoltaic array, across three distinct locations. The SPRING design produces significant reductions in environmental impacts, particularly in regions with high solar insolation and electricity‐intensive energy demands. For example, in Arizona, global warming potential values for a conventional, adjacent PV and SPRING greenhouse are found to be 3.71, 2.38, and 2.36 kg CO₂ eq/kg tomato, respectively. Compared to a conventional greenhouse, the SPRING design may increase life cycle environmental burdens in colder regions because the shading effect of OPV increases heating demands. Our analysis shows that SPRING designs must maintain crop yields at levels similar to conventional greenhouses in order to be economically competitive. Assuming consistent crop yields, uncertainty analysis shows average net present cost of production across Arizona to be $3.43, $3.38, and $3.64 per kg of tomato for the conventional, adjacent PV and SPRING system, respectively.     

Life Cycle Impacts and Benefits of Wood along the Value Chain: The Case of Switzerland

Sustainable use of wood may contribute to coping with energy and material resource challenges. The goal of this study is to increase knowledge of the environmental effects of wood use by analyzing the complete value chain of all wooden goods produced or consumed in Switzerland. We start from a material flow analysis of current wood use in Switzerland. Environmental impacts related to the material flows are evaluated using life cycle assessment–based environmental indicators. Regarding climate change, we find an overall average benefit of 0.5 tonnes carbon dioxide equivalent per cubic meter of wood used. High environmental benefits are often achieved when replacing conventional heat production and energy‐consuming materials in construction and furniture. The environmental performance of wood is, however, highly dependent on its use and environmental indicators. To exploit the mitigation potential of wood, we recommend to (1) apply its use where there are high substitution benefits like the replacement of fossil fuels for energy or energy‐intensive building materials, (2) take appropriate measures to minimize negative effects like particulate matter emissions, and (3) keep a systems perspective to weigh effects like substitution and cascading against each other in a comprehensive manner. The results can provide guidance for further in‐depth studies and prospective analyses of wood‐use scenarios.     

Implementing a Dynamic Life Cycle Assessment Methodology with a Case Study on Domestic Hot Water Production

This work contributes to the development of a dynamic life cycle assessment (DLCA) methodology by providing a methodological framework to link a dynamic system modeling method with a time‐dependent impact assessment method. This three‐step methodology starts by modeling systems where flows are described by temporal distributions. Then, a temporally differentiated life cycle inventory (TDLCI) is calculated to present the environmental exchanges through time. Finally, time‐dependent characterization factors are applied to the TDLCI to evaluate climate‐change impacts through time. The implementation of this new framework is illustrated by comparing systems producing domestic hot water (DHW) over an 80‐year period. Electricity is used to heat water in the first system, whereas the second system uses a combination of solar energy and gas to heat an equivalent amount of DHW at the same temperature. This comparison shows that using a different temporal precision (i.e., monthly vs. annual) to describe process flows can reverse conclusions regarding which case has the best environmental performance. Results also show that considering the timing of greenhouse gas (GHG) emissions reduces the absolute values of carbon footprint in the short‐term when compared with results from the static life cycle assessment. This pragmatic framework for the implementation of time in DLCA studies is proposed to help in the development of the methodology. It is not yet a fully operational scheme, and efforts are still required before DLCA can become state of practice.     

The Design of a Sustainability Assessment Standard Using Life Cycle Information

Sustainability assessment standards are currently being developed for a range of building products. This activity has been stimulated through the considerable success of the U.S. Green Building Council's (USGBC) LEED? standard. Transparent life cycle–based standards can guide manufacturers to design products that have reduced environmental impact. The use of a sustainability standard can certify performance and avoid green washing. In this article we present a logical framework for designing a sustainability assessment standard through the creation of tables that award points in the standard to be consistent with life cycle information. Certain minimum principles of consistency are articulated. In the case that the life cycle impact assessment method maps the life cycle inventory to impact through a linear weighting, two design approaches—impact category and activity substitution—are constructed to be consistent with these principles. The approach is illustrated in a case study of a partial redesign of a carpet sustainability assessment standard (NSF/ANSI‐140).