From Surface ZrO2 Coating to Bulk Zr Doping by High Temperature Annealing of Nickel‐Rich Lithiated Oxides and Their Enhanced Electrochemical Performance in Lithium Ion Batteries

One of the major hurdles of Ni‐rich cathode materials Li_1+x(Ni_xCo_zMn_z)_wO₂, y > 0.5 for lithium‐ion batteries is their low cycling stability especially for compositions with Ni ≥ 60%, which suffer from severe capacity fading and impedance increase during cycling at elevated temperatures (e.g., 45 °C). Two promising surface and structural modifications of these materials to alleviate the above drawback are (1) coatings by electrochemically inert inorganic compounds (e.g., ZrO₂) or (2) lattice doping by cations like Zr⁴⁺, Al³⁺, Mg²⁺, etc. This paper demonstrates the enhanced electrochemical behavior of Ni‐rich material LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) coated with a thin ZrO₂ layer. The coating is produced by an easy and scalable wet chemical approach followed by annealing the material at ≥700 °C under oxygen that results in Zr doping. It is established that some ZrO₂ remains even after annealing at ≥800 °C as a surface layer on NCM811. The main finding of this work is the enhanced cycling stability and lower impedance of the coated/doped NCM811 that can be attributed to a synergetic effect of the ZrO₂ coating in combination with a zirconium doping.     

Image analysis of modified cellulose fibers from sugarcane bagasse by zirconium oxychloride

Surface modification of natural fibers has been made using different methods. In this paper, cellulose fibers from sugarcane bagasse were bleached and modified by zirconium oxychloride in situ. The chemically modified cellulose fibers were compared to those of bleached ones. Cellulose fibers were modified with ZrO₂·nH₂O nanoparticles through the use of zirconium oxychloride in acidic medium in the presence of cellulose fibers using urea as the precipitating agent. The spatial distribution characterization of hydrous zirconium oxide on cellulose fibers was carried out by combining both processing and image analyses obtained by SEM and statistical methodologies. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TG) were also used to characterize the nanocomposite. Results indicated that ZrO₂·nH₂O nanoparticles of about 30-80 nm diameter deposited on cellulose fibers were heterogeneously dispersed.     

纳米二氧化锆对人永生化角质形成细胞组蛋白H3修饰的影响

目的 阐明纳米二氧化锆暴露对人永生化角质形成细胞Ha Ca T组蛋白H3常见修饰位点的影响,探讨组蛋白H3修饰变化的潜在机制,为纳米材料的进一步安全应用提供理论基础。方法 在利用扫描电子显微镜、激光粒度仪、X射线衍射仪等技术对纳米二氧化锆进行详细表征的基础上,通过蛋白质免疫印迹及流式细胞术等方法评价纳米二氧化锆暴露对细胞生存率、细胞内蓄积量以及组蛋白H3修饰等的影响。结果 在分散介质中纳米二氧化锆明显团聚,比表面积减少,二次粒径增大,其短时间内（1 h）即诱导了组蛋白H3第10位丝氨酸的磷酸化、第9及14位赖氨酸的乙酰化、第4及27位赖氨酸的三甲基化修饰水平的升高。进一步分析发现,纳米二氧化锆的细胞内蓄积量及其引起的DNA损伤水平,与纳米二氧化锆诱导的组蛋白H3修饰水平均呈线性相关。结论 纳米二氧化锆暴露后诱导了Ha Ca T细胞组蛋白H3常见修饰位点的变化,其细胞内的蓄积是诱导组蛋白H3修饰变化的关键因素之一,且组蛋白H3修饰的调控机制可能涉及DNA损伤修复途径。     

Direct Visualization of the Interfacial Degradation of Cathode Coatings in Solid State Batteries: A Combined Experimental and Computational Study

The interfacial instability between a thiophosphate solid electrolyte and oxide cathodes results in rapid capacity fade and has driven the need for cathode coatings. In this work, the stability, evolution, and performance of uncoated, Li₂ZrO₃‐coated, and Li₃B₁₁O₁₈‐coated LiNi_0.5Co_0.2Mn_0.3O₂ cathodes are compared using first‐principles computations and electron microscopy characterization. Li₃B₁₁O₁₈ is identified as a superior coating that exhibits excellent oxidation/chemical stability, leading to substantially improved performance over cells with Li₂ZrO₃‐coated or uncoated cathodes. The chemical and structural origin of the different performance is interpreted using different microscopy techniques which enable the direct observation of the phase decomposition of the Li₂ZrO₃ coating. It is observed that Li is already extracted from the Li₂ZrO₃ in the first charge, leading to the formation of ZrO₂ nanocrystallites with loss of protection of the cathode. After 50 cycles separated (Co, Ni)‐sulfides and Mn‐sulfides can be observed within the Li₂ZrO₃‐coated material. This work illustrates the severity of the interfacial reactions between a thiophosphate electrolyte and oxide cathode and shows the importance of using coating materials that are absolutely stable at high voltage.     

Antibacterial,antifungal and cytotoxic properties of some sulfonamide-derived chromones

A series of antibacterial and antifungal sulfonamide (sulfanilamide, sulfaguanidine, sulfamethaxozole, 4-aminoethylbenzenesulfonamide and 4-amino-6-trifluoromethyl-benzene-1,3-disulfonamide) derived chromones, previously reported as inhibitors of carbonic anhydrase, have been screened for in-vitro antibacterial activity against four Gram-negative (Escherichia coli, Pseudomonas aeruginosa, Salmonella typhi and Shigella flexeneri) and two Gram-positive (Bacillus subtilis and Staphylococcus aureus) bacterial strains, and for in-vitro antifungal activity against Trichophyton longifusus, Candida albicans, Aspergillus flavus, Microsporum canis, Fusarium solani, Candida glaberata. All compounds (1)–(5) showed significant antibacterial activity against all four Gram-negative species and both Gram-positive species. However, three of them, (1), (4) and (5), were found to be comparatively much more active compared to (2) and (3). Of these, (5) was found to be the most active one. For antifungal activity, generally compounds (1) and (2) showed significant activity against more than three strains whereas (3)–(5) also showed significant activity against varied fungal strains. In the brine shrimp bioassay for in-vitro cytotoxic properties, only two compounds, (4) and (5) displayed potent cytotoxic activity, LD₅₀ = 2.732 × 10^{? 4} M) and LD₅₀ = 2.290 × 10^{? 4} M) respectively, against Artemia salina.     

Metal-based sulfonamides: Their preparation,characterization and in-vitro antibacterial,antifungal & cytotoxic properties. X-ray structure of 4-[(2-hydroxybenzylidene) amino] benzenesulfonamide

Synthesis, characterization and biological studies of Schiff base-derived sulfonamides and their Co (II), Cu (II), Ni (II) and Zn (II) complexes have been reported and screened for in-vitro antibacterial activity against six Gram-negative; E. coli, K. pneumoniae, P. aeruginosa, P. mirabilis, S. typhi and S. dysenteriae and four Gram-positive; B. cereus, C. diphtheriae, S. aureus and S. pyogenes bacterial strains and for in-vitro antifungal activity against T. longifusus, C. albicans, A. flavus, M. canis, F. solani, and C. glaberata. All compounds showed moderate to significant antibacterial activity, however, the zinc (II) complexes were found to be more active. Some of the compounds also showed significant antifungal activity against various fungal strains. Only compounds (6) and (10) displayed potent cytotoxic activity with LD₅₀ = 4.644 × 10^{? 4} and 4.106 × 10^{? 4} moles/mL respectively, against Artemia salina. The X-ray structure of 4-[(2-hydroxybenzylidene)amino]benzenesulfonamide is also reported.     

Preparation and quality by design assisted (Qb-d) optimization of bioceramic loaded microspheres for periodontal delivery of doxycycline hyclate

PLGA (Lactic- co-glycolic acid) coated chitosan microspheres loaded with hydroxyapatite and doxycycline hyclate complex were developed in the present study for periodontal delivery. A modified single emulsion method was adopted for the development of microspheres. Formulation was optimized on the basis of particle size, drug loading and encapsulation efficiency with the central composite design using 2³ factorial design. Microspheres were optimized and electron microscopy revealed their spherical shape and porous nature. In-vitro study showed initial burst and then sustained release behavior of the formulation for 14 days. Further, in-vitro antibacterial study performed on E. coli (ATCC-25922) and S. aureus (ATCC-29213) revealed concentration dependent activity. Also, in-vitro cyto-toxicity assessment ensures biocompatibility of the formulation with the fibroblast’s cells. Overall, the quality by design assisted PLGA microspheres, demonstrated the desired attributes and were found suitable for periodontal drug delivery.     

Synthesis and characterization of pure cubic zirconium oxide nanocrystals by decomposition of bis-aqua, tris-acetylacetonato zirconium(IV) nitrate as new precursor complex

Pure zirconium oxide (ZrO₂) nanocrystals with diameters 10-30 nm are fabricated from bis-aqua, tris-acetylacetonato zirconium(IV) nitrate; [Zr(acac)₃(H₂O)₂](NO₃); by thermal decomposition. The different combinations of oleylamine, or polyethyleneglycol (PEG) and triphenylphosphine, were added as surfactants to control the particle size. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), ultraviolet-visible (UV-Vis) spectroscopy, photoluminescence spectroscopy (PL), Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS) to depict the phase and morphology. The synthesized ZrO₂ nanoparticles have a cubic structure. The FT-IR spectrum showed the purity of obtained ZrO₂ nanocrystals with cubic phase. The UV-Visible absorption peak for ZrO₂ was observed at 233 nm (5.3 eV in photon energy). The band at 363 nm for cubic ZrO₂ nanocrystals was found.     

Comparative analysis of corrosion resistance between beta titanium and Ti-6Al-4V alloys: A systematic review

BackgroundThe knowledge of the electrochemical property (corrosion resistance) of beta titanium alloys compared to Ti-6Al-4 V for implants is relevant because of the potential cytotoxic effects that the released ions could cause to long-term health.ObjectivesThe objective of this systematic review was to seek information on the electrochemical properties (corrosion resistance) of beta titanium alloys compared to Ti-6Al-4 V since the awareness of the electrochemical behavior of the implant surface in the medium is essential for the best indication of the alloys or compositional changes, which may promote benefits to bone-implant interaction in all areas that this procedure is required.MethodsThe PubMed, LILACS, COCHRANE Library, and Science Direct databases were electronically searched for the terms: dental implants AND beta-titanium AND Ti-6Al-4 V AND electrochemical technics. The inclusion criteria were research articles that studied beta-titanium compared to Ti-6Al-4 V using electrochemical techniques in electrolytes of chemical composition similar to body fluid, published in English, between 2000 and 2020. Articles that did not compare the corrosion resistance of these alloys in electrolytes similar to body fluids were excluded.ResultsA total of 189 articles were restored and selected by title and/or abstract according to the inclusion and exclusion criteria, which resulted in 15 articles that were reduced to 8 after read in full. The studies in vitro evaluated the corrosion resistance in electrolytes Hank, Ringer, SBF, and 0.9 % NaCl, between beta titanium alloys, obtained by arc fusion or bars stock, and Ti-6Al-4 V, for dental or biomedical implants submitted to surface treatments by heat treatment, plasma electrolytic oxidation (PEO), alkaline treatment, and thermomechanical.ConclusionThe evaluated literature allowed to determine that 1) The oxides Nb₂O ₅, Ta₂O _5, and ZrO₂ have higher stability and protection quality than that of TiO₂ modified by the oxides of Al and V; 2) A higher modulus of elasticity of the Ti-6Al-4 V alloy favors protection against corrosion by maintaining a thicker and more firmly adhered oxide layer; 3) The increase in the thickness of the Ti alloys superficial layer contributes to the improvement of the corrosion resistance.     

In-vitro antibacterial,antifungal and cytotoxic properties of metal-based furanyl derived sulfonamides

A new series of antibacterial and antifungal furanyl-derived sulfonamides and their cobalt (II), copper (II), nickel (II) and zinc (II) metal complexes have been synthesized, characterized and screened for their in-vitro antibacterial activity against four Gram-negative (Escherichia coli, Shigella flexneri, Pseudomonas aeruginosa and Salmonella typhi) and two Gram-positive (Bacillus subtilis and Staphylococcus aureus) bacterial strains and, for in-vitro antifungal activity against Trichophyton longifusus, Candida albicans, Aspergillus flavus, Microsporum canis, Fusarium solani and Candida glaberata. The results of these studies revealed that all compounds showed significant to moderate antibacterial activity. However, the zinc (II) complexes were found to be comparatively much more active as compared to the others. For antifungal activity generally, compounds (22) and (24) showed significant activity against Escherichia coli (a), (6) against Shigella flexeneri (b), (16) and (22) against Pseudomonas aeruginosa (c), (14) and (16) against Salmonella typhi (d), (9) against Staphylococcus aureus (e) and, (14) and (16) against Bacillus subtilis (f) fungal strains. The brine shrimp (Artemia salina) bioassay was also carried out to study their in-vitro cytotoxic properties. Only three compounds, (6), (10) and (23) displayed potent cytotoxic activity with LD₅₀ = 1.8535 × 10^{? 4}, 1.8173 × 10^{? 4} and 1.9291 × 10^{? 4} respectively.     

Photocatalytic Antibacterial Effects Are Maintained on Resin-Based TiO2 Nanocomposites after Cessation of UV Irradiation

Photocatalysis induced by TiO₂ and UV light constitutes a decontamination and antibacterial strategy utilized in many applications including self-cleaning environmental surfaces, water and air treatment. The present work reveals that antibacterial effects induced by photocatalysis can be maintained even after the cessation of UV irradiation. We show that resin-based composites containing 20% TiO₂ nanoparticles continue to provide a pronounced antibacterial effect against the pathogens Escherichia coli, Staphylococcus epidermidis, Streptococcus pyogenes, Streptococcus mutans and Enterococcus faecalis for up to two hours post UV. For biomaterials or implant coatings, where direct UV illumination is not feasible, a prolonged antibacterial effect after the cessation of the illumination would offer new unexplored treatment possibilities.     

Surface reactivity and in vitro biological evaluation of sol gel derived silver/calcium silicophosphate bioactive glass

Ag ions are known for their antibacterial effects. Ag containing silicate glasses have been extended to create bioactive glasses that exhibit inhibitory effects on bacterial growth using different techniques. In this work, calcium and calcium/silver silicophosphate glasses were synthesized from the sol-gel process and their physicochemical and in vitro biological properties were studied and compared. The effect of silver concentration on in vitro bioactivity and antibacterial properties of the glasses was investigated. Ag₂O was substituted for CaO in the glass formula up to 2 mol% and in vitro bioactivity of the samples was evaluated by soaking them in simulated body fluid followed by structural characterization using XRD, FTIR and SEM techniques. The results showed that both glasses favored precipitation of the calcium phosphate layer when they were soaked in simulated body fluid; however, the morphology of apatite crystals changed for the 2% mol silver containing sample. Substitution of 2% mol Ag₂O for CaO seemed to slightly stimulate the rate of precipitation. The in vitro biodegradation rate of the silver/ calcium silicophosphate glasses was lower than that of the silver-free one (control). Also, the antibacterial properties of the samples indicated that these effects were improved by increasing silver concentration in bioactive glass composition.     

Copper (II) and zinc (ii) metal-based salicyl-, furanyl-, thienyl- and pyrrolyl-derived ONNO,NNNO, ONNS & NNNS donor asymmetrically mixed schiff-bases with antibacterial and antifungal potentials

A new series of asymmetric salicyl-, furanyl-, thienyl- and pyrrolyl-derived ONNO, NNNO, ONNS & NNNS donor antibacterial and antifungal Schiff-bases and their copper(II) and zinc(II) metal complexes have been synthesized and characterized. IR spectra indicated the ligands to act as quartdentate towards divalent metal ions via two azomethine-N, deprotonated-O of salicyl, furanyl-O, thienyl-S and/or pyrrolyl-N. The magnetic moments and electronic spectral data suggest octahedral geometry for Cu(II) and Zn(II) complexes. NMR spectral data of the ligands and their diamagnetic zinc(II) complexes well-define their proposed structures/geometries. Elemental analyses data of the ligands and metal complexes agree with their proposed structures/geometries. The synthesized ligands, along with their metal complexes were screened for their antibacterial activity against B. cereus, C. diphtheriae, E. coli, K. pneumoniae, P. mirabilis, P. aeruginosa, S. typhi, S. dysenteriae and S. aureus strains and for in-vitro antifungal activity against T. schoenleinii, C. glabrata, P. boydii, C. albicans, A. niger, M. canis and T. mentagrophytes. The results of these studies show the metal complexes to be more antibacterial/antifungal against one or more species as compared to the uncomplexed ligands. The brine shrimp bioassay was also carried out to study their in-vitro cytotoxic properties. Eight compounds, L₄, (1), (7), (8), (11), (17), (19) and (23) displayed potent cytotoxic activity with LD₅₀ = 1.445 × 10^{? 3}, 1.021 × 10^{? 3}, 7.478 × 10^{? 4}, 8.566 × 10^{? 4}, 1.028 × 10^{? 3}, 9.943 × 10^{? 4}, 8.730 × 10^{? 4} and 1.124 × 10^{? 3} M respectively, against Artemia salina.     

Antibacterial and antibiofilm efficacy of Ag NPs,Ni NPs and Al2O3 NPs singly and in combination against multidrug-resistant Klebsiella pneumoniae isolates

BackgroundAlthough traditional antibiotic therapy provided an effective approach to combat pathogenic bacteria, the long-term and widespread use of antibiotic results in the evolution of multidrug-resistant bacteria. Recent progress in nanotechnology offers an alternative opportunity to discover and develop novel antibacterial agents.MethodsA total of 51 K. pneumoniae strains were collected from several specimens of hospitalized patients and identified by two parallel methods (biochemical tests and Vitek-2 system). The antibiotic sensitivity of isolates was evaluated by disk diffusion antibiogram and Vitek-2 system. The biofilms formation ability of antibiotic-resistant strains was examined by microtiter plate and tube methods based on crystal violet staining. The molecular technique was used to determine key genes responsible for biofilms formation of clinical isolates. The antibacterial and antibiofilm activities of Ag NPs, Ni NPs, Al₂O₃ NPs singly (NPs) and in combination (cNPs) were investigated against selected strains using standard methods. Moreover, the cytotoxicity of NPs was evaluated on mouse neural crest-derived (Neuro-2A) cell line.ResultsThe results of bacterial studies revealed that more than 80 % of the isolates were resistant to commonly used antibiotics and about 95 % of them were able to form biofilms. Moreover, the presence of fimA and mrkA genes were determined in all biofilm-producing strains. The results of antibacterial and antibiofilm activities of NPs and cNPs demonstrated the lower MIC and MBEC values for Al₂O₃ NPs singly as well as for Ag/Ni cNPs and Ag/Al₂O₃ cNPs in combination, respectively. Overall, the inhibitory effects of cNPs were superior to NPs against all strains. Furthermore, the results of the checkerboard assays showed that Ag NPs act synergistically with two other NPs against multidrug-resistant Klebsiella pneumoniae (MDR-K. pneumoniae) isolates. The in vitro cytotoxicity assay revealed no significant toxicity of NPs against Neuro-2A cells.ConclusionIn the present study, the combination of Ag NPs, Ni NPs, and Al₂O₃ NPs were used against MDR-K. pneumoniae strains and antibacterial and antibiofilm activities were observed for Ag/Ni cNPs and Ag/Al₂O₃ cNPs.     

Antibacterial,antifungal and cytotoxic properties of novel N-substituted sulfonamides from 4-hydroxycoumarin

A new series of 4-({[2, 4-dioxo-2H-chromen-3 (4H)-ylidene] methyl} amino) sulfonamides have been obtained by the condensation reaction of 4-hydroxycoumarin with various sulfonamides (sulfanilamide, sulfaguanidine, p-aminomethylsufanilamide, p-aminoethylsufanilamide, sulfathiazole, sulfamethoxazole, sulfamethazine and 4-[(2-amino-4-pyrimidinyl) amino] benzenesulfonamide) in the presence of an excess of ethylorthoformate. These compounds were screened for their in-vitro antibacterial activity against four Gram-negative (E. coli, S. flexneri, P. aeruginosa and S. typhi) and two Gram-positive (B. subtilis and S. aureus) bacterial strains and for in-vitro antifungal activity against T. longifusus, C. albicans, A. flavus, M. canis, F. solani and C. glaberata. Results revealed that a significant antibacterial activity was observed by compounds (4) and (5), (6) and (8) against two Gram-negative, (P. aeruginosa and S. typhi) and two Gram-positive (B. subtilis and S. aureus) species, respectively. Of these (4) was found to be the most active. Similarly, for antifungal activity compounds (3) and (8) showed significant activity against M. canis and, (6) and (8) against F. solani. The brine shrimp bioassay was also carried out to study their in-vitro cytotoxic properties and only two compounds, (4) and (8) possessing LD₅₀ = 2.9072 × 10^{? 4} and 3.2844 × 10^{? 4} M, respectively, displayed potent cytotoxic activity against Artemia salina     

Microplate-based assays for the evaluation of antibacterial effects of photocatalytic coatings

Three microplate-based viability assays for assessing the antibacterial effects of photocatalytic coatings were compared to the conventional colony count method. In the experimental design, cultured Escherichia coli were exposed to photocatalysis on various TiO₂ films in the presence of either UVA or visible light. The photocatalytic effects on the bacterial physiology were determined by real-time measurements of metabolic activity (XTT assay), biomass formation in the liquid medium (growth assay), and by assessing membrane integrity (with propidium iodide and SYTO 9 fluorescent nucleic acid binding dyes—BacLight assay). All three methods proved to be more sensitive and reproducible than colony count for the evaluation of the bactericidal effect of photocatalysis, XTT, and growth assay succeeded in detecting differences in both UVA and visible light-activated photocatalytic coatings. BacLight could efficiently detect the visible light-dependent photocatalytic effect on bacteria and identify membrane damage, but resulted inadequate for evaluating the UVA-dependent antibacterial effects. The described microplate-based evaluation methods proved being more effective and rapid than the colony count assay for assessing the antibacterial effect of various photocatalytic coatings.     

Metal based drugs: design,synthesis and in-vitro antimicrobial screening of Co(II), Ni(II), Cu(II) and Zn(II) complexes with some new carboxamide derived compounds: crystal structures of N-[ethyl(propan-2-yl)carbamothioyl]thiophene-2-carboxamide and its copper(II) complex

A new series of compounds derived from thiophene-2-carboxamide were synthesized and characterized by IR, ¹H-NMR and ¹³C-NMR, mass spectrometry and elemental analysis. These compounds were further used to prepare their Co(II), Ni(II), Cu(II) and Zn(II) metal complexes. All metal(II) complexes were air and moisture stable. Physical, spectral and analytical data have shown the Ni(II) and Cu(II) complexes to exhibit distorted square-planar and Co(II) and Zn(II) complexes tetrahedral geometries. The ligand (L¹) and its Cu(II) complex were characterized by the single-crystal X-ray diffraction method. All the ligands and their metal(II) complexes were screened for their in-vitro antimicrobial activity. The antibacterial and antifungal bioactivity data showed that the metal(II) complexes were found to be more potent than the parent ligands against one or more bacterial and fungal strains.     

Theoretical study on the initial reaction mechanisms of <Emphasis Type="Italic">ansa</Emphasis>-metallocene zirconium precursor on hydroxylated Si(1 0 0) surface

The initial reaction mechanisms for depositing ZrO₂ thin films using ansa-metallocene zirconium (Cp₂CMe₂)ZrMe₂ precursor were studied by density functional theory (DFT) calculations. The (Cp₂CMe₂)ZrMe₂ precursor could be absorbed on the hydroxylated Si(1 0 0) surface via physisorption. Possible reaction pathways of (Cp₂CMe₂)ZrMe₂ were proposed. For each reaction, the activation energies and reaction energies were compared, and stationary points along the reaction pathways were shown. In addition, the influence of dispersion effects on the reactions was evaluated by non-local dispersion corrected DFT calculations.     

Delineation of crosstalk between HSP27 and MMP-2/MMP-9: A synergistic therapeutic avenue for glioblastoma management

BackgroundEpithelial to mesenchymal transition (EMT) and extracellular matrix (ECM) remodeling, are the two elemental processes promoting glioblastoma (GBM). In the present work we propose a mechanistic modelling of GBM and in process establish a hypothesis elucidating critical crosstalk between heat shock proteins (HSPs) and matrix metalloproteinases (MMPs) with synergistic upregulation of EMT-like process and ECM remodeling.MethodsThe interaction and the precise binding site between the HSP and MMP proteins was assayed computationally, in-vitro and in GBM clinical samples.ResultsA positive crosstalk of HSP27 with MMP-2 and MMP-9 was established in both GBM patient tissues and cell-lines. This association was found to be of prime significance for ECM remodeling and promotion of EMT-like characteristics. In-silico predictions revealed 3 plausible interaction sites of HSP27 interacting with MMP-2 and MMP-9. Site-directed mutagenesis followed by in-vitro immunoprecipitation assay (IP) with 3 mutated recombinant HSP27, confirmed an interface stretch containing residues 29–40 of HSP27 to be a common interaction site for both MMP-2 and MMP-9. This was further validated with in-vitro IP of truncated (sans AA 29–40) recombinant HSP27 with MMP-2 and MMP-9.ConclusionThe association of HSP27 with MMP-2 and MMP-9 proteins along with the identified interacting stretch has the potential to contribute towards drug development to inhibit GBM infiltration and migration.General significanceCurrent findings provide a novel therapeutic target for GBM opening a new horizon in the field of GBM management.