A novel one-pot 'green' synthesis of stable silver nanoparticles using soluble starch

Stable silver nanoparticles have been synthesized by using soluble starch as both the reducing and stabilizing agents; this reaction was carried out in an autoclave at 15 psi, 121 degrees C for 5 min. Nanoparticles thus prepared are found to be stable in aqueous solution over a period of three months at room temperature (approximately 25 degrees C). The size of these nanoparticles was found to be in the range of 10-34 nm as analyzed using transmission electron micrographs. The X-ray diffraction analysis revealed the face-centred cubic (fcc) geometry of silver nanoparticles. Iodometric titration confirmed the entrapment of silver nanoparticles inside the helical amylose chain. These silver nanoparticles embedded in soluble starch produced a typical emission peak at 553 nm when excited at 380 nm. The use of environmentally benign and renewable materials like soluble starch offers numerous benefits of eco-friendliness and compatibility for pharmaceutical and biomedical applications.     

An amperometric immunosensor for osteoproteogerin based on gold nanoparticles deposited conducting polymer

An amperometric immunosensor was fabricated for the detection of osteoproteogerin (OPG) by covalently immobilizing a monoclonal OPG antibody (anti-OPG) onto the gold nanoparticles (AuNPs) deposited functionalized conducting polymer (5,2′:5′,2″-terthiophene-3′-carboxylic acid). AuNPs were electrochemically deposited onto the conducting polymer using cyclic voltammetry. The particle size of deposited AuNPs was controlled by varying the scan rate and was characterized by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The immobilization of anti-OPG was also confirmed using XPS. The principle of immunosensor was based on a competitive immunoassay between free-OPG and labeled-OPG for the active sites of anti-OPG. HRP was used as a label that electrochemically catalyzes the H₂O₂ reduction. The catalytic reduction was monitored amperometrically at −0.4 V vs. Ag/AgCl. The immunosensor showed a linear range between 2.5 and 25 pg/ml and the detection limit was determined to be 2 pg/ml. The proposed immunosensor was successfully applied for real human samples to detect OPG.     

Preparation and properties of starch acetate fibers for potential tissue engineering applications

This article reports the development of fibers from starch acetates that have mechanical properties and water stability better than most polysaccharide‐based biomaterials and protein fibers used in tissue engineering. In this research, starch acetates with three different degrees of substitution (DS) have been used to develop fibers for potential use as tissue engineering scaffolds. Varying the DS of starch acetate will provide fibers with different mechanical properties, hydrophilicity, and degradation behavior. Fibers made from DS 2.3 and 2.8 starch acetates have mechanical properties and water stability required for tissue engineering applications. The starch acetate fibers support the adhesion of fibroblasts demonstrating that the fibers would be suitable for tissue engineering and other medical applications. Biotechnol. Bioeng. 2009;103: 1016–1022. © 2009 Wiley Periodicals, Inc.     

Photoluminescent biocompatible silicon nanoparticles for cancer theranostic applications

Silicon nanoparticles (SiNPs) obtained by mechanical grinding of porous silicon have been used for visualization of living cells in vitro. It was found that SiNPs could penetrate into the cells without any cytotoxic effect up to the concentration of 100 μg/ml. The cell cytoplasm was observed to be filled by SiNPs, which exhibited bright photoluminescence at 1.6 eV. SiNPs could also act as photosensitizers of the singlet oxygen generation, which could be used in the photodynamic therapy of cancer. These properties of SiNPs are discussed in view of possible applications in theranostics (both in therapy and in diagnostics). (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Metallic nanoparticles: microbial synthesis and unique properties for biotechnological applications,bioavailability and biotransformation

The impact of nanotechnology in all areas of science and technology is evident. The expanding availability of a variety of nanostructures with properties in the nanometer size range has sparked widespread interest in their use in biotechnological systems, including the field of environmental remediation. Nanomaterials can be used as catalysts, adsorbents, membranes, water disinfectants and additives to increase catalytic activity and capability due to their high specific surface areas and nanosize effects. Thus, nanomaterials appear promising for new effective environmental technologies. Definitely, nanotechnology applications for site remediation and wastewater treatment are currently in research and development stages, and new innovations are underway. The synthesis of metallic nanoparticles has been intensively developed not only due to its fundamental scientific interest but also for many technological applications. The use of microorganisms in the synthesis of nanoparticles is a relatively new eco-friendly and promising area of research with considerable potential for expansion. On the other hand, chemical synthesis occurs generally under extreme conditions (e.g. pH, temperature) and also chemicals used may have associated environmental and human health impacts. This review is an overview of current research worldwide on the use of microorganisms during the biosynthesis of metallic nanoparticles and their unique properties that make them good candidates for many applications, including in biotechnology.     

Gold nanoparticles and bioconjugation: a pathway for proteomic applications

In the last few years gold nanoparticles (AuNPs) became extremely interesting materials due to their enhanced optical, chemical and electrical properties. With the intention of taking advantage of those properties, the use of AuNPs has spread into a wide variety of areas such as physics, chemistry, biology, industry and medicine. More interestingly, their ability to form robust conjugates with biomolecules has given proteomics a new tool to improve aspects where the current methods to study proteins and their interactions in living cells cannot achieve the success required. In this review we present some of the current methods for AuNPs synthesis, the tailoring of their surface with ligands to improve stability and strategies to conjugate with biomolecules. Lastly, we also discuss their application in proteomic methods and recent developments in clinical diagnosis.     

The identification ofXanthorrhoea resins by starch morphology: Prospects for archaeological and taxonomic applications

For Australian Aboriginal people plant resins have played an important role in both trade and the manufacture of hafted tools. In particular, the resins of theXanthorrhoea species were widely distributed and favored resources. The aim of this pilot study was to: (1) determine if starch grains were present in all of theXanthorrhoea resin samples examined, and (2) determine the feasibility of discriminating between resins of differentXanthorrhoea species by the morphological attributes of their starch grains. The results established that starch grains were present within all of theXanthorrhoea species resins that were examined. Moreover, for the purpose of identifying resins from within this genus the preliminary results suggest that starch grains have sufficient differences in attributes to allow discrimination between species. The results suggest that further research into the morphological attributes of starch grains in resins may prove to be an efficient and cost-effective means by which species identification could be achieved for small portions of archaeological resin samples.

---

Resumen  Las resinas de las plantas han tenido un papel muy importante para los Aborigenes Australianos en el intercambio y en la manofactura de herramientas con mangos. En particular, las resinas de las especiesXanthorrhoea eran recursos ampliamente distribuidos y preferidos. El objetivo de este estudio piloto fue: I) establecer si los granos de almidon estaban presentes en todas las muestras estudiadas de resina deXanthorrhoea y2) determinar la factibilidad de discriminacion entre las resinas de diferentes especies mediante los atributos morfológicos de sus granos de almidón. Los resultados establecieron que los granos de almidón se encontraban presentes en todas las especies de resinaXanthorrhoea examinadas. Ademas, para este proposito de identificar resinas desde dentro del genero glos resultados preliminares sugieren que los granos de almidón tienen suficientes diferencias en atributos para permitir la discriminación entre las especies. Los resultados indican que futuras investitigaciones dirigidas a las caracteristticas morfológicas de los granos de almidón en las resinas pueden ser un medio eficiente y barato a trovés del cual se puede lograr la indentificacion de especies.

     

Recent advances in synthesis and surface modification of lanthanide-doped upconversion nanoparticles for biomedical applications

Lanthanide (Ln)-doped upconversion nanoparticles (UCNPs) with appropriate surface modification can be used for a wide range of biomedical applications such as bio-detection, cancer therapy, bio-labeling, fluorescence imaging, magnetic resonance imaging and drug delivery. The upconversion phenomenon exhibited by Ln-doped UCNPs renders them tremendous advantages in biological applications over other types of fluorescent materials (e.g., organic dyes, fluorescent proteins, gold nanoparticles, quantum dots, and luminescent transition metal complexes) for: (i) enhanced tissue penetration depths achieved by near-infrared (NIR) excitation; (ii) improved stability against photobleaching, photoblinking and photochemical degradation; (iii) non-photodamaging to DNA/RNA due to lower excitation light energy; (iv) lower cytotoxicity; and (v) higher detection sensitivity. Ln-doped UCNPs are therefore attracting increasing attentions in recent years. In this review, we present recent advances in the synthesis of Ln-doped UCNPs and their surface modification, as well as their emerging applications in biomedicine. The future prospects of Ln-doped UCNPs for biomedical applications are also discussed.     

Light-sensitive lipid-based nanoparticles for drug delivery: design principles and future considerations for biological applications

Abstract

Radiation-based therapies aided by nanoparticles have been developed for decades, and can be primarily categorized into two main platforms. First, delivery of payload of photo-reactive drugs (photosensitizers) using the conventional nanoparticles, and second, design and development of photo-triggerable nanoparticles (primarily liposomes) to attain light-assisted on-demand drug delivery. The main focus of this review is to provide an update of the history, current status and future applications of photo-triggerable lipid-based nanoparticles (light-sensitive liposomes). We will begin with a brief overview on the applications of liposomes for delivery of photosensitizers, including the choice of photosensitizers for photodynamic therapy, as well as the currently available light sources (lasers) used for these applications. The main segment of this review will encompass the details of strategies used to develop photo-triggerable liposomes for their drug delivery function. The principles underlying the assembly of photoreactive lipids into nanoparticles (liposomes) and photo-triggering mechanisms will be presented. We will also discuss factors that limit the applications of these liposomes for in vivo triggered drug delivery and emerging concepts that may lead to the biologically viable photo-activation strategies. We will conclude with our view point on the future perspectives of light-sensitive liposomes in the clinic.     

Characterization of cotton fabric nanocomposites with in situ generated copper nanoparticles for antimicrobial applications

Abstract

In the present study, cotton fabric nanocomposites with in situ generated copper nanoparticles (CuNPs) were prepared using Cassia alata leaf extract as reducing agent. The prepared cotton fabric nanocomposites were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and scanning electron microscoy (SEM) techniques. The cotton fabric nanocomposites exhibited significant antibacterial activity against Escherichia coli bacteria. These nanocomposites retained the antibacterial activity even after 15 washes indicating the generation of permanent CuNPs in them. The antibacterial activity of the nanocomposites prepared even in sewerage water was also studied. The obtained results suggest that the cotton fabric nanocomposites with in situ generated CuNPs can be considered for medical and water treatment applications.     

A convenient method to prepare emulsified polyacrylate nanoparticles from powders [corrected] for drug delivery applications

We describe a method to obtain purified, polyacrylate nanoparticles in a homogeneous powdered form that can be readily reconstituted in aqueous media for in vivo applications. Polyacrylate-based nanoparticles can be easily prepared by emulsion polymerization using a 7:3 mixture of butyl acrylate and styrene in water containing sodium dodecyl sulfate as a surfactant and potassium persulfate as a water-soluble radical initiator. The resulting emulsions contain nanoparticles measuring 40-50 nm in diameter with uniform morphology, and can be purified by centrifugation and dialysis to remove larger coagulants as well as residual surfactant and monomers associated with toxicity. These purified emulsions can be lyophilized in the presence of maltose (a non-toxic cryoprotectant) to provide a homogeneous dried powder, which can be reconstituted as an emulsion by addition of an aqueous diluent. Dynamic light scattering and microbiological experiments were carried out on the reconstituted nanoparticles. This procedure allows for ready preparation of nanoparticle emulsions for drug delivery applications.     

Synthesis of Tragia involucrata mediated platinum nanoparticles for comprehensive therapeutic applications: Antioxidant,antibacterial and mitochondria-associated apoptosis in HeLa cells

This study aims to synthesis pharmaceutical potential platinum nanoparticles from Tragia involucrata leaf extract (Ti-PtNPs) for biomedical applications. The colour development in the reaction mixture confirms the integration of Ti-PtNPs and its surface plasmon resonance (SPR) peak observed at 252 nm. The crystalline nature of Ti-PtNPs was authenticated by X-ray diffraction (XRD) analysis. The functional groups present in the T. involucrata (AE-Ti) aqueous extract, notably polyphenols, alkaloids, flavonoids, and proteins, participated in the synthesis of Ti-PtNPs, established in the Fourier-transform infrared spectroscopy (FT-IR) analysis. The synthesized Ti-PtNPs demonstrate spherical like particles with an average size of 10 nm. Ti-PtNPs exhibited dose depended on antioxidant activities and the activities were higher than the AE-Ti. The antibacterial activity of Ti-PtNPs was tested against Gram-positive (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli) and displays admirable inhibitory activity in agar bioassay, disc diffusion, killing kinetics. Also, the synthesized Ti-PtNPs have attached the outer cell wall of bacteria and increased the protein leakage activity. The Ti-PtNPs exhibited potent cytotoxicity against HeLa cells with an IC₅₀ value of 27.72 μg/ml. Moreover, the Ti-PtNPs enhance the intracellular ROS production, which induces the mitochondria-mediated apoptosis. Thus, the synthesis Ti-PtNPs can be used as a broad spectrum of pharmaceutical applications.     

Health risk assessments of lithium titanate nanoparticles in rat liver cell model for its safe applications in nanopharmacology and nanomedicine

Due to their high chemical stability, lithium titanate (Li₂TiO₃) nanoparticles (LTT NPs) now are projected to be transferred into different nanotechnology areas like nano pharmacology and nano medicine. With the increased applications of LTT NPs for numerous purposes, the concerns about their potential human toxicity effects and their environmental impact are also increased. However, toxicity data for LTT NPs related to human health are very limited. Therefore we aimed to investigate toxicity potentials of various concentrations (0–1,000 ppm) of LTT NPs (<100 nm) in cultured primary rat hepatocytes. Cell viability was detected by [3-(4,5-dimethyl-thiazol-2-yl) 2,5-diphenyltetrazolium bromide] (MTT) assay and lactate dehydrogenase (LDH) release, while total antioxidant capacity (TAC) and total oxidative stress (TOS) levels were determined to evaluate the oxidative injury. DNA damage was analyzed by scoring liver micronuclei rates and by determining 8-oxo-2-deoxyguanosine (8-OH-dG) levels. The results of MTT and LDH assays showed that higher concentrations of dispersed LTT NPs (500 and 1,000 ppm) decreased cell viability. Also, LTT NPs increased TOS (300, 500 and 1,000 ppm) levels and decreased TAC (300, 500 and 1,000 ppm) levels in cultured hepatocytes. The results of genotoxicity tests revealed that LTT NPs did not cause significant increases of micronucleated hepatocytes and 8-OH-dG as compared to control culture. In conclusion, the obtained results showed for the first time that LTT NPs had dose dependent effects on oxidative damage and cytotoxicity but not genotoxicity in cultured primary rat hepatocytes for the first time.     

Convenient synthesis of heterobifunctional poly(ethylene glycol) suitable for the functionalization of iron oxide nanoparticles for biomedical applications

A straightforward route is proposed for the multi-gram scale synthesis of heterobifunctional poly(ethylene glycol) (PEG) oligomers containing combination of triethyloxysilane extremity for surface modification of metal oxides and amino or azido active end groups for further functionalization. The suitability of these PEG derivatives to be conjugated to nanomaterials was shown by pegylation of ultrasmall superparamagnetic iron oxide (USPIO) nanoparticles (NPs), followed by functionalization with small peptide ligands for biomedical applications.     

Green synthesis of ZnO nanoparticles for antimicrobial and vegetative growth applications: A novel approach for advancing efficient high quality health care to human wellbeing

The present work aims to synthesize zinc oxide (ZnO) nanoparticles via green approaches using leaf extract of Parthenium hysterophorus. UV–vis and FT-IR tests confirmed the existence of biomolecules, active materials, and metal oxides. The X-ray diffraction structural study exposes the ZnO nanoparticles formation with hexagonal phase structures. SEM and TEM analysis reveal surface morphologies of ZnO nanoparticles and most of them are spherical with a size range of 10 nm. ZnO nanoparticles were revealed strong antimicrobial activity against both bacterial and fungal strains. The germination of seeds and vegetative growth of Sesamum indicum has been greatly improved.     

Synthesis and characterisation of bis(2 methyl-8-hydroxyquinoline) zinc nanoparticles for organic light emitting diode applications

In this paper, bis(2 methyl-8-hydroxyquinoline) zinc (Zn(mq)₂) nanoparticles were synthesised at room temperature by a simple chemical precipitation method. The Zn(mq)₂ nanoparticles were characterised by powder X-ray diffraction (PXRD) analysis to confirm the crystalline nature of the Zn(mq)₂ nanoparticles. The morphology and the elemental composition of Zn (mq)₂ nanoparticles were analysed by high-resolution scanning electron microscopy (HR-SEM) and energy dispersive X-ray analysis (EDAX). The functional groups of the compound were studied with the help of Fourier transform infrared spectroscopy (FTIR) and FT Raman spectroscopy. Further, Zn (mq)₂ nanoparticles were characterised by C-13 NMR spectroscopy, mass spectroscopy and CHN analysis. The thermal stability of the particles was studied using TG-DSC curve. The optical properties of the particles were studied by means of UV–Visible spectroscopy. The luminescence property of the synthesised particles was observed from the photoluminescence spectrum to confirm the possible application in organic light emitting diode.     

Green synthesis of silver nanoparticles from aqueous extract of Scutellaria barbata and coating on the cotton fabric for antimicrobial applications and wound healing activity in fibroblast cells (L929)

Scutellaria barbata is a perennial herb which was vastly prescribed in Chinese medicine to treat inflammations, infections and it is also used a detoxifying agent. We synthesized silver nanoparticles with Scutellaria barbata extract and characterized the nanoparticles with UV–Vis spectroscopic analysis, TEM, AFM, FTIR and XRD. The biofilm inhibiting property of synthesized silver nanoparticles were examined with XTT reduction assay and the antimicrobial property was examined with well diffusion method. The silver nanoparticles were also coated with cotton fabrics and their efficacy against antimicrobials was analyzed to prove its application. The cytotoxic property of synthesized silver nanoparticles was examined with L929 fibroblast cells using MTT assay. Finally we analyzed the wound healing property of synthesized silver nanoparticles with wound scratch assay. The result of our UV–Vis spectroscopic analysis confirms Scutellaria barbata aqueous extract reduced silver ions and synthesized silver nanoparticles. The characterization studies TEM, AFM, FTIR and XRD confirms the synthesized silver nanoparticles are in ideal shape and size to be utilized as a drug. The XTT reduction assay proves silver nanoparticles effectively inhibits the biofilm formation in both resistant and sensitive strains. Antimicrobial sensitivity tests confirms synthesized silver nanoparticles and cotton coated synthesized silver nanoparticles both are effective against gram positive, gram negative and fungal species. Further the results of MTT assay confirms the synthesized silver nanoparticles are non toxic and finally the wound healing potency of the nanoparticles was confirmed with wound scratch assay. Over all our results authentically confirms the silver nanoparticles synthesized with Scutellaria barbata aqueous extract is potent wound healing drug.     

Facile and greener hydrothermal honey-based synthesis of Fe3O 4/Au core/shell nanoparticles for drug delivery applications

In the present research, we report a greener, faster, and low-cost synthesis of gold-coated iron oxide nanoparticles (Fe₃O₄/Au-NPs) by different ratios (1:1, 2:1, and 3:1 molar ratio) of iron oxide and gold with natural honey (0.5% w/v) under hydrothermal conditions for 20 minutes. Honey was used as the reducing and stabilizing agent, respectively. The nanoparticles were characterized by X-ray diffraction (XRD), UV-visible spectroscopy, field emission scanning electron microscope (FESEM), energy-dispersive X-ray spectroscopy (EDXS), transmission electron microscopy (TEM), selected area electron diffraction (SAED), vibrating sample magnetometer (VSM), and fourier transformed infrared spectroscopy (FT-IR). The XRD analysis indicated the presence of Fe₃O₄/Au-NPs, while the TEM images showed the formation of Fe₃O₄/Au-NPs with diameter range between 3.49 nm and 4.11 nm. The VSM study demonstrated that the magnetic properties were decreased in the Fe₃O₄/Au-NPs compared with the Fe₃O₄-NPs. The cytotoxicity threshold of Fe₃O₄/Au-NPs in the WEHI164 cells was determined by using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. It was demonstrated no significant toxicity in higher concentration up to 140.0 ppm which can become the main candidates for biological and biomedical applications, such as drug delivery.