Synthesis and characterization of chitosan/ZnO nanoparticle composite membranes

Novel chitosan/ZnO nanoparticle (CS/nano-ZnO) composite membranes were prepared via the method of sol-cast transformation and studied by UV-vis absorption spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray fluorescence spectrometry (EDX). The characterization revealed that ZnO nanoparticles dispersed homogeneously within the chitosan matrix. The mechanical and antibacterial properties of the product were investigated. The results showed that the ZnO content had an effect on the mechanical properties of CS/nano-ZnO composite membranes, and that the antibacterial activities of CS membranes for Bacillus subtilis, Escherichia coli, and Staphylococcus aureus were enhanced by the incorporation of ZnO. Further, CS/nano-ZnO composite membranes with 6-10 wt % ZnO exhibited high antibacterial activities.     

Clay nanopaper composites of nacre-like structure based on montmorrilonite and cellulose nanofibers—Improvements due to chitosan addition

Clay nanopaper are nanocomposites with nacre-like structure and multifunctional characteristics including high modulus, significant strength and toughness as well as fire retardancy and low oxygen transmission rate (OTR). Montmorrilonite (MTM) and nanofibrillated cellulose (NFC) hydrocolloids are combined with a chitosan (CS) solution to form high MTM content nanopaper structures by the use of a previously developed papermaking approach. Chitosan functions as flocculation agent and decreases dewatering time to less than 10% compared with MTM-NFC clay nanopaper. The effect of chitosan on the clay nanopaper structure was studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. Properties were measured by uniaxial tensile testing, thermogravimetric analysis (TGA), OTR and moisture adsorption experiments. A nacre-like multilayered structure was confirmed and the chitosan-clay nanopaper showed favorable mechanical properties at clay contents as high as 44-48 wt%.     

Structure and properties of starch/α-zirconium phosphate nanocomposite films

Glycerol-plasticized pea starch/α-zirconium phosphate (PS/ZrP) nanocomposite films with different loading levels of α-zirconium phosphate (α-ZrP) were prepared by a casting and solvent evaporation method. The effects of the α-ZrP on the structure and properties of the PS/ZrP films were characterized by Fourier transform infrared (FT-IR) spectroscopy, wide-angle X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and tensile testing. The results indicated that hydrogen bonds formed between pea starch (PS) and α-ZrP, which improved the compatibility between PS and α-ZrP. Compared with the neat PS, the tensile strength (σ_b) and elongation at break (ε_b) of the PS/ZrP nanocomposite films were significantly enhanced with an increase in α-ZrP content. The maximum values of σ_b and ε_b reached 9.44 MPa and 47.5%, respectively, at 0.3% α-ZrP and 25% glycerol as plasticizer. The moisture uptake of the nanocomposite films, measured in an environment with 92% relative humidity, was reduced by the addition of α-ZrP. The structure and properties of pea starch-based films were modified and improved by the incorporation of α-ZrP.     

Preparation and characterization of nano-hydroxyapatite/chitosan cross-linking composite membrane intended for tissue engineering

In this paper, a series of nano-hydroxyapatite(n-HA)/chitosan cross-linking composite membranes (n-HA; 0, 5, 10, 15, 20 and 30 wt%) were successfully developed by a simple casting/solvent evaporation method. n-HA with size about 20 nm in vertical diameter and about 100 nm in horizontal diameter was successfully synthesized by a hydro-thermal precipitation method, and then dispersed into chitosan/genipin solution with the aid of continuous ultrasound to develop n-HA/chitosan cross-linking composite membranes. The detailed characterizations including Fourier transform infrared spectroscopy (FTIR), X-ray diffractometer (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), water adsorption and tensile test were performed. With the analysis of FTIR spectra and TGA spectra, it suggested that there was existence of possible interactions between polymer and n-HA. Meanwhile, the n-HA content was greatly effected on the morphology as well as the tensile property of composite membrane. In vitro cytotoxicity test suggested that the developed n-HA/chitosan cross-linking composite membrane was non-cytotoxicity against L929 cells after 24 h's incubation might be suitable for further in vivo application.     

Obtaining of new magnetic nanocomposites based on modified polysaccharide

The study presents the preparation of some composite materials with magnetic properties by two different encapsulation methods of magnetite (Fe₃O₄) in a polymer matrix based on carboxymethyl starch-g-polylactic acid (CMS-g-PLA). The copolymer matrix used to obtain the magnetic nanocomposites was synthesized by grafting reaction of carboxymethyl starch (CMS) with d,l-lactic acid (DLLA), in the presence of Sn octanoate [Sn(Oct)₂] as catalyst. Magnetite was obtained by co-precipitation from aqueous salt solutions FeCl₂/FeCl₃ (molar ratio 1/2). The magnetic composites were prepared by precipitation method in acetone (non-solvent) of the DMSO solutions of magnetite and copolymer, and synthesis in situ of the nanocomposites. In the first case, the particle size measured by DLS-technique was 168 nm, and the magnetization was 46.82 emu/g, while after in situ synthesis, the composite materials showed smaller size (141 nm), but the magnetization was reduced (3.04 emu/g). The higher magnetization in the first case is due to the great degree of encapsulation of the magnetite, which was about 43.4 wt.%, compared to 4.37 wt.% for the in situ synthesis (determined by thermogravimetry). The CMS-g-PLA copolymer, magnetite, and the nanocomposites were characterized by infrared spectroscopy (FTIR), near infrared chemical imagistic (NIR-CI), dynamic light scattering (DLS) technique, X-ray diffraction (WAXD), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM) and thermal analyses. Since the polymer matrix and magnetite are biodegradable and biocompatible, the magnetic nanocomposites can be used for conjugation of some drugs. The polymer matrix CMS-g-PLA acts as a shell, and vehicle for the active component, whereas magnetite is the component which makes targeting possible by external magnetic field manipulation.     

Preparation and mechanical properties of chitosan/carbon nanotubes composites

Biopolymer chitosan/multiwalled carbon nanotubes (MWNTs) nanocomposites have been successfully prepared by a simple solution-evaporation method. The morphology and mechanical properties of the chitosan/MWNTs nanocomposites have been characterized with field emission scanning electron microscopy (SEM), bright field transmission electron microscopy (TEM), optical microscopy (OM), wide-angle X-ray diffraction (XRD), and tensile as well as nanoindentation tests. The MWNTs were observed to be homogeneously dispersed throughout the chitosan matrix. When compared with neat chitosan, the mechanical properties, including the tensile modulus and strength, of the nanocomposites are greatly improved by about 93% and 99%, respectively, with incorporation of only 0.8 wt % of MWNTs into the chitosan matrix.     

Preparation of semi-interpenetrating polymer networks composed of chitosan and poloxamer

Through semi-interpenetration of polymer networks with poloxamer, mechanical properties of chitosan (CS) sponge were increased for wound dressing application. Synthesis of poloxamer macromer was confirmed by proton nuclear magnetic resonance (1H NMR) spectra. Possible interactions between CS and poloxamer in semi-interpenetrating polymer networks (SIPNs), and changes in crystalline structures of both polymers were evaluated by Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD), respectively. Swelling behavior, thermal analysis, mechanical properties, and morphology of SIPNs were studied by thermal gravimetric analysis, differential scanning calorimetry (DSC), compressive modulus measurement, and scanning electron microscopy (SEM), respectively. Preparation of poloxamer macromer, and intermolecular hydrogen bonding between CS and poloxamer were confirmed by NMR and FTIR, respectively. Melting temperature of poloxamer in SIPNs decreased due to prevention of crystallization by incorporation of CS. Formation of SIPNs with poloxamer and increasing poloxamer content in CS/poloxamer SIPNs increased mechanical strength of CS sponge compared with CS/poloxamer blend. Formation of SIPNs with poloxamer remarkably increased water content of CS due to hydrophilicity of CS and poloxamer. These results suggest CS/poloxamer sponges prepared by SIPNs method have good possibility for wound dressing application owing to rapid water adsorption, high mechanical strength, and interconnected cross-sectional morphology of SIPNs.     

Synthesis and characterization of chitosan-based pH-sensitive semi-interpenetrating network microspheres for controlled release of diclofenac sodium

pH-Sensitive semi-interpenetrating networks (IPNs) based on chitosan (Cs) and acrylamide-grafted hydroxyethylcellulose (AAm-g-HEC) were prepared in the form of microspheres (MPs) by emulsion-crosslinking technique using glutaraldehyde (GA) as a crosslinker. Diclofenac sodium (DS) drug was successfully encapsulated into IPN microspheres by varying the ratio of Cs and AAm-g-HEC, % drug loading, and amount of GA. DS encapsulation of up to 83% was obtained as measured by UV spectroscopy. MPs with average particle sizes in the range of 188-310 μm were obtained. MPs were characterized by Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and Differential scanning calorimetry (DSC). Diffusion coefficients (D) of water transport through the microspheres were determined using an empirical equation. In vitro release of DS from these matrices has been investigated in pH 1.2 and 7.4 media.     

Chitosan pyrolysis and adsorption properties of chitosan and its carbonizate

Chitosan was characterized by Fourier transform infrared spectroscopy (FTIR), ¹³C-nuclear magnetic resonance (NMR), X-ray diffraction (XRD), and elemental analysis (EA). The thin chitosan films obtained by the casting method were heated in vacuum from room temperature to 600 °C. The progress of thermal degradation and carbonization process was monitored by FTIR spectroscopy in a vacuum cell, which allows the elimination of the influence of atmospheric humidity on the chitosan and carbonizate properties. The adsorption of water on the degassed chitosan and its carbonizate as well the oxidation process was also investigated by FTIR spectroscopy. The surface morphology of initial chitosan and obtained carbonaceous material was observed using atomic force microscopy (AFM). Detailed characterization of raw material and carbonization conditions is necessary for tailoring reproducible adsorbent properties.     

Preparation and characterization of N-heterocyclic chitosan derivative based gels for biomedical applications

The novel N-heterocyclic chitosan aerogel derivatives were prepared by reacting 79% deacetylated chitosan separately with 4-pyridinecarboxaldehyde and 2,6-pyridinedicarboxaldehyde followed by subsequent solvent exchange into acetone, filteration and lyophilization. The identity of the Schiff bases was confirmed by UV–vis absorption spectroscopy and Fourier transform infrared (FTIR) spectroscopy. The N-heterocyclic chitosan derivatives were evaluated by X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), rheological studies and biological activity. Overall, the N-heterocyclic chitosan derivative based gels open new perspectives in biomedical applications.     

Synthesis and Characterization of Pectin/PVP Hydrogel Membranes for Drug Delivery System

The purpose of the present study was to develop and design pectin and polyvinyl pyrrolidone (PVP) blended hydrogel membranes (PEVP), with different pectin: PVP ratios (1:0.2, 1:0.4, 1:0.6, 1:0.8 and 1:1 w/w), which were prepared by using a conventional solution casting technique. An attempt has been made to characterize the hydrogel membranes by various instrumental techniques like, FTIR (Fourier transform infrared) spectroscopy, X-ray diffraction (XRD), Differential scanning calorimetry (DSC), tensile strength test and scanning electron microscopy (SEM). The release patterns of the drug (salicylic acid) from the hydrogel membrane were done in three different release mediums (pH 1.4, pH 7.4 and distilled water) and samples were analyzed spectrophotometrically at 294 nm wavelength on a UV Vis spectrophotometer. MTT assay was done to ensure cytocompatibility of the pectin/PVP hydrogel membranes using B16 melanoma cells. FTIR spectroscopy indicated the presence of secondary amide (I) absorption bands. The XRD study shows decrease in crystallinity of the hydrogel membranes with increase in PVP ratio. DSC study shows an increase in T _g of pectin after blending with PVP. It was found that tensile strength increases with increasing PVP ratios in the hydrogel membranes. The prepared hydrogel membranes were found to be biocompatible with B16 melanoma cells.     

Polyelectrolyte complexes based on pectin-NH2 and chondroitin sulfate

This work reports on the formation and characterization of a polyelectrolyte complex based on pectin (PT), functionalized with primary amine groups (PT-NH₂), and chondroitin sulfate (CS). From the simple mixture of PT-NH₂ and CS, in acid conditions, it was formed a polyelectrolyte complex, labeled as PT-NH₂/CS complex, which was confirmed through FTIR spectroscopy. The electrostatic interactions among the protonated amine groups from PT-NH₂ and the sulfate groups from CS are responsible by complex formation. XRD patterns and thermal analysis showed that the complex formation disrupts some interactions present on the PT-NH₂ and CS, but on the other hand, others are created. SEM images showed that the PT-NH₂/CS complex presents a porous and rough morphology. PT-NH₂/CS complex is new material that maintains the properties of CS with synergic association of properties from both polymers, which could maximize its applicability as biomaterial, for example.     

Synthesis and characterization of chitosan-based hydrogels

Biocompatible hydrogels based on water-soluble chitosan–ethylene glycol acrylate methacrylate (CS–EGAMA) and polyethylene glycol diamethacrylate (PEGDMA) were synthesized by photopolymerization. Characterization of morphology, weight loss, water state of hydrogel, pH-sensitivity and cytotoxicity were investigated by scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), X-ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), swelling test and methylthiazolydiphenyl-tetrazolium bromide (MTT) assay. The results indicated that the hydrogels were sensitive to pH of the medium, no cytotoxicity for L929 and SW1353, satisfactory for the composite to be used in bioapplications.     

Synthesis of chitosan–polycaprolactone blend for control delivery of ofloxacin drug

In the present research work chitosan has been blended with different amounts of polycaprolactone (PCL) (80:20, 75:25, 60:40 and 50:50) for using them for control delivery of ofloxacin. The blends were characterized by Fourier transmission infra red spectroscopy (FTIR), UV–visible spectroscopy (UV), scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis. From the FTIR spectra the various groups present in chitosan and PCL blend were monitored. The homogeneity, morphology and crystallinity of the blends were ascertained from SEM and XRD data, respectively. The swelling studies have been measured at different drug loading. The kinetics of the drug delivery system has been systematically studied. Drug release kinetics was analyzed by plotting the cumulative release data vs. time by fitting to an exponential equation which indicated the non-Fickian type of kinetics. The drug release was investigated at different pH medium and it was found that the drug release depends upon the pH medium as well as the nature of matrix.     

Corn porous starch: preparation, characterization and adsorption property

This study was carried out to develop a new type of modified starch based on α-amylase and glucoamylase. The structural and chemical characteristics of the porous starch were determined by Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The potential application of the porous starch as an adsorbent was evaluated using methyl violet as an adsorbed model. The adsorption capacity was optimized by investigating the reaction factors, including the mass ratio of α-amylase to glucoamylase (m_α-amylase/m_glucoamylase), the mass ratio of total amount of enzymes to starch (m_enzyme/m_St), the ratio of liquid volume to starch mass (VH₂O/mSt), pH value of the reaction solution, enzymatic reaction temperature, and enzymatic reaction time. The hydrolysis ratio of each sample was also determined to investigate the effect of different reaction conditions on the hydrolysis degree. The results suggest that the porous starch has a more excellent adsorption capacity than the native starch, and may be expected to have wide potential applications in many fields.     

Structural evaluation of sugar cane bagasse steam pretreated in the presence of CO2 and SO2

Background

Previous studies on the use of SO₂ and CO₂ as impregnating agent for sugar cane bagasse steam treatment showed comparative and promising results concerning the cellulose enzymatic hydrolysis and the low formation of the inhibitors furfural and hydroxymethylfurfural for the use of CO₂ at 205°C/15 min or SO₂ at 190°C/5 min. In the present study sugar cane bagasse materials pretreated as aforementioned were analyzed by scanning and transmission electron microscopy (SEM and TEM), X-Ray Diffraction (XRD) and Infrared (FTIR spectroscopy) aiming a better understanding of the structural and chemical changes undergone by the pretreated materials.

Results

SEM and TEM data showed that the structural modifications undergone by the pretreatment with CO₂ were less pronounced in comparison to that using SO_2, which can be directly related to the combined severity of each pretreatment. According to XRD data, untreated bagasse showed, as expected, a lower crystallinity index (CI = 48.0%) when compared to pretreated samples with SO₂ (CI = 65.5%) or CO₂ (CI = 56.4%), due to the hemicellulose removal of 68.3% and 40.5%, respectively. FTIR spectroscopy supported SEM, TEM and XRD results, revealing a more extensive action of SO₂.

Conclusions

The SEM, TEM, XRD and FTIR spectroscopy techniques used in this work contributed to structural and chemical analysis of the untreated and pretreated bagasse. The images from SEM and TEM can be related to the severity of SO₂ pretreatment, which is almost twice higher. The crystallinity index values obtained from XRD showed that pretreated materials have higher values when compared with untreated material, due to the partial removal of hemicellulose after pretreatment. FTIR spectroscopy supported SEM, TEM and XRD results. CO₂ can actually be used as impregnating agent for steam pretreatment, although the present study confirmed a more extensive action of SO₂.     

Electrospinning of Cross-Linked Magnetic Chitosan Nanofibers for Protein Release

A poly(vinylalcohol) (PVA) electrospun/magnetic/chitosan nanocomposite fibrous cross-linked network was fabricated using in situ cross-linking electrospinning technique and used for bovine serum albumin (BSA) loading and release applications. Sodium tripolyphosphate (TPP) and glutaraldehyde (GA) were used as cross-linkers which modified magnetic-Fe₃O₄ chitosan as Fe₃O_4/CS/TPP and Fe₃O_4/CS/GA, respectively. BSA was used as a model protein drugs which was encapsulated to form Fe₃O₄/CS/TPP/BSA and Fe₃O₄/CS/GA/BSA nanoparticles. The composites were electrospun with PVA to form nanofibers. Nanofibers were characterized by field emission scanning electron microscopy (FESEM) and Fourier transform infrared spectroscopy (FTIR). The characterization results suggest that Fe₃O₄ nanoparticles with average size of 45 nm were successfully bound on the surface of chitosan. The cross-linked nanofibers were found to contain uniformly dispersed Fe₃O₄ nanoparticles. The size and morphology of the nanofibers network was controlled by varying the cross-linker type. FTIR data show that these two polymers have intermolecular interactions. The sample with TPP cross-linker showed an enhancement of the controlled release properties of BSA during 30-h experimental investigation.

Graphical Abstract

Open in a separate windowᅟKEY WORDS: cross-linker, electrospun, magnetite, mano-composite, protein loading     

Biocomposite films prepared from ionic liquid solutions of chitosan and cellulose

Blends of chitosan and cellulose were successfully produced using 1-butyl-3-methylimidazolium acetate (BMIMAc) as solvent media. Films were prepared from the blends by manually spreading the solution on a flat surface and precipitating the polymers in a mixture of methanol and water. To prevent the shrinkage of films, most of the absorbed water was removed by freeze drying under vacuum. Films prepared from the polymeric solutions were investigated by means of FT-IR, TGA, X-ray diffraction and SEM measurements. The shifting of the bands corresponding to -NH and CO groups of chitosan (FT-IR), the absence of the diffraction peaks at 2θ = 10.7 and 14.9° (XRD), the increased E_a for thermal decomposition for all the polymeric blends (MTGA), and the presence of an apparent homogeneous structure with no phase separation of the two polymers (SEM) provide evidence for the miscibility between chitosan and cellulose in the solid state.     

Novel complex hydrogels based on N-carboxyethyl chitosan and quaternized chitosan and their controlled in vitro protein release property

A novel pH-responsive hydrogel (CHC) composed of N-carboxyethyl chitosan (CEC) and N-[(2-hydroxy-3-trimethylammonium) propyl] chitosan chloride (HTCC) was synthesized by the redox polymerization technique. Turbidimetric titrations were used to determine the stoichiometric ratio of these two chitosan derivatives. The hydrogel was characterized by FT-IR, thermal gravimetric analysis (TGA), X-ray diffractometry (XRD), and scanning electron microscopy (SEM). The dynamic transport of water showed that the hydrogel reached equilibrium within 48 h. The swelling ratio of CHC hydrogel depended significantly on the pH of the buffer solution. The performance of the CHC as a matrix for the controlled release of BSA was investigated. It was found that the release behavior was determined by pH value of the medium as well as the intermolecular interaction between BSA and the hydrogels.     

Extraction and Characterization of α-Chitin and Chitosan from Six Different Aquatic Invertebrates

Chitin and chitosan were extracted from six different aquatic invertebrate species. Species dry weights varied between 5 % and 20 % chitin, and the chitosan productivity of these chitins varied between 66 % and 74 %. Chitin and chitosan structures were characterized by FTIR, TGA, XRD, and SEM. FTIR results showed that the chitins obtained from the organisms were observed in α form. Chitin thermal stabilities were in the order Ranatra linearis?>?Anax imperator?>?Hydrophilus piceus?>?Notonecta glauca?>?Agabus bipustulatus?>?Asellus aquaticus, and chitosan thermal stabilities in the order N. glauca?>?A. bipustulatus?>?A. imperator?>?R. linearis?>?H. piceus?>?A. aquaticus. The crystalline index values of chitins varied between 76.4 % and 90.6 %. Their surface morphology was examined by SEM, revealing nanofibre structures. These six aquatic invertebrate species with characterized chitin and chitosan structures may be used as alternative chitin and chitosan sources for various technological purposes.