Effects of Spray Drying on Physicochemical Properties of Chitosan Acid Salts

The effects of spray-drying process and acidic solvent system on physicochemical properties of chitosan salts were investigated. Chitosan used in spray dryings was obtained by deacetylation of chitin from lobster (Panulirus argus) origin. The chitosan acid salts were prepared in a laboratory-scale spray drier, and organic acetic acid, lactic acid, and citric acid were used as solvents in the process. The physicochemical properties of chitosan salts were investigated by means of solid-state CP-MAS ¹³C nuclear magnetic resonance (NMR), X-ray powder diffraction (XRPD), differential scanning calorimetry, and Fourier transform infrared spectrometry (FTIR) and near-infrared spectroscopy. The morphology of spray-dried chitosan acid salts showed tendency toward higher sphericity when higher temperatures in a spray-drying process were applied. Analysis by XRPD indicated that all chitosan acid salts studied were amorphous solids. Solid-state ¹³C NMR spectra revealed the evidence of the partial conversion of chitosan acetate to chitin and also conversion to acetyl amide form which appears to be dependent on the spray-drying process. The FTIR spectra suggested that the organic acids applied in spray drying may interact with chitosan at the position of amino groups to form chitosan salts. With all three chitosan acid salts, the FTIR bands at 1,597 and 1,615 cm⁻¹ were diminished suggesting that –NH groups are protonated. The FTIR spectra of all chitosan acid salts exhibited ammonium and carboxylate bands at 1,630 and 1,556 cm⁻¹, respectively. In conclusion, spray drying is a potential method of preparing acid salts from chitosan obtained by deacetylation of chitin from lobster (P. argus) origin.     

Preparation, circular dichroism induced helical conformation and optical property of chitosan acid salt complexes for biomedical applications

The efficient procedure for preparation of chitosan acid complexes containing aspartic acid, benzilic acid and terephthalic acid moieties in isopropyl alcohol under mild condition has been demonstrated. The ionic complexation between chitosan and the acid is confirmed by FTIR and ¹H NMR spectroscopy. The circular dichroism (CD) spectra of chitosan/aspartic acid complex showed negative (at λ = 312) band, chitosan/benzilic acid and chitosan/terephthalic complexes showed positive (at λ = 286 and 315 nm) band in DMSO, indicating that the polymers adopted helical (left-handed and last two right-handed) secondary structure. The inversion of the CD pattern in chitosan acid salt complexes suggests that there is a change in the chiral structure of the polymer system. Some physical properties and surface morphology were analyzed by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetry (TG) and scanning electron microscopy (SEM). Optical properties of chitosan derivatives are evaluated by photoluminescence (PL) spectroscopy which showed red shift. The introduction of acid moieties into chitosan increases the solubility in most of the organic solvents, which opens new perspectives for the employment of chitosan-based biohybrid in biomedical applications.     

Determination of the degree of N-acetylation (DA) of chitin and chitosan in the presence of water by first derivative ATR FTIR spectroscopy

A new method for the determination of the degree of N-acetylation (DA) of chitin and chitosan is described using first derivative diamond ATR FTIR spectroscopy. Applying the derivative values of the amide III band at 1327 cm⁻¹ and the CH deformation band of the N-acetyl group at 1383 cm⁻¹ as measure of the N-acetyl content of the sample in relation to the derivative value of the bridge oxygen vibration at 1163 cm⁻¹ as internal standard, a linear correlation to the results of first derivative UV spectroscopy was obtained and confirmed by elemental analysis and Raman spectroscopy. The described method allows the determination of the degree of N-acetylation of chitosan and chitin in the presence of water thus making drying procedures unnecessary.     

Synthesis and characterization of chitosan/ZnO nanoparticle composite membranes

Novel chitosan/ZnO nanoparticle (CS/nano-ZnO) composite membranes were prepared via the method of sol-cast transformation and studied by UV-vis absorption spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray fluorescence spectrometry (EDX). The characterization revealed that ZnO nanoparticles dispersed homogeneously within the chitosan matrix. The mechanical and antibacterial properties of the product were investigated. The results showed that the ZnO content had an effect on the mechanical properties of CS/nano-ZnO composite membranes, and that the antibacterial activities of CS membranes for Bacillus subtilis, Escherichia coli, and Staphylococcus aureus were enhanced by the incorporation of ZnO. Further, CS/nano-ZnO composite membranes with 6-10 wt % ZnO exhibited high antibacterial activities.     

Biophysical studies on chitosan-coated liposomes

Liposomes have been used as delivery vehicles for stabilizing drugs, overcoming barriers to cellular and tissue uptake, and for directing their contents toward specific sites in vivo. Chitosan is a biological macromolecule derived from crustacean shells and has several emerging applications in drug development, obesity control, and tissue engineering. In the present work, the interaction between chitosan and dipalmitoyl phosphatidylcholine (DPPC) liposomes was studied by transmission electron microscopy (TEM), zeta potential, solubilization using the nonionic detergent octylglucoside (OG), as well as Fourier transform infrared (FTIR) spectroscopy and viscosity measurements. The coating of DPPC liposomes by a chitosan layer was confirmed by electron microscope images and the zeta potential of liposomes. Coating of liposome by chitosan resulted in an increase in liposomal size by addition of a layer of 92 ± 27.1 nm. The liposomal zeta potential became increasingly positive as chitosan concentration increased from 0.1 to 0.3% w/v, then it held at a relatively constant value. The amount of detergent needed to completely solubilize the liposomal membrane was increased after coating of liposomes with chitosan, indicating an increased membrane resistance to the detergent and hence a change in the natural membrane permeation properties. In the analysis of FTIR spectra of DPPC, the symmetric and antisymmetric CH₂ (at 2,800–3,000 cm⁻¹) bands and the C=O (at 1,740 cm⁻¹) stretching band were investigated in the absence and presence of the chitosan. It was concluded that appropriate combining of the liposomal and chitosan characteristics might be utilized for the improvement of the therapeutic efficacy of liposomes as a drug delivery system.     

Preparation and characterization of films based on zirconium sulfophenyl phosphonate and chitosan

Zirconium sulfophenyl phosphonate (ZrSP), Zr(O₃P-C₆H₄SO₃H)₂, was synthesized and characterized to prepare nanocomposites based on chitosan (CS). The effects of ZrSP on the structure, morphology, and thermal properties, as well as the mechanical properties of the films were investigated by Fourier-transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM), and tensile tests. FTIR spectroscopy revealed that electrostatic interactions had been formed in the nanocomposites, which improved the compatibility between CS and ZrSP. XRD and SEM results indicated the ZrSP nanoparticles were uniformly distributed in the chitosan matrix at low loading, and obvious aggregations existed at high loading. In addition, compared with neat CS, the values of tensile strength (σ_b), elongation at break (ε_b), and water resistance of CS/ZrSP-3 containing 0.6 wt % ZrSP had been improved by 60.0%, 69.7%, and 41.8%, respectively.     

Sulfonation of papain-treated chitosan and its mechanism for anticoagulant activity

The novel low-molecular-weight chitosan polysulfate (MW 5120-26,200 Da) was prepared using the depolymerization of chitosan with papain (EC. 3.4.22.2). The sulfonation of depolymerized products was performed using chlorosulfonic acid in N,N-dimethylformamide under semi-heterogeneous conditions. The structures of the products were characterized by FTIR, ¹³C NMR, and ¹H NMR (1D, 2D NMR) spectroscopy. The present study sheds light on the mechanism of anticoagulant activity of chitosan polysulfate. Anticoagulant activity was investigated by an activated partial thromboplastin assay, a thrombin time assay, a prothrombin time assay, and thrombelastography. Surface plasmon resonance also provided valuable data for understanding the relationship between the molecular binding of sulfated chitosan to two important blood clotting regulators, antithrombin III and heparin cofactor II. These results show that the principal mechanism by which this chitosan polysulfate exhibits anticoagulant activity is mediated through heparin cofactor II and is dependent on polysaccharide molecular weight.     

Methylated N-aryl chitosan derivative/DNA complex nanoparticles for gene delivery: Synthesis and structure–activity relationships

In this study, three kinds of methylated chitosan containing different aromatic moieties were synthesized by two steps, reductive amination and methylation, respectively. The chemical structures of all methylated derivatives, methylated N-(4-N,N-dimethylaminocinnamyl) chitosan chloride (MDMCMChC), methylated N-(4-N,N-dimethylaminobenzyl) chitosan chloride (MDMBzChC), and methylated N-(4-pyridinylmethyl) chitosan chloride (MPyMeChC) were characterized by ATR–FTIR and ¹H NMR spectroscopy. The complexes between the chitosan derivatives and plasmid DNA at different N/P ratios were characterized by gel electrophoresis, dynamic light scattering, and atomic force microscopic techniques. The smallest particle sizes of these complexes were obtained at N/P ratio of 5 and ranged from 95 to 124 nm while the zeta-potentials were in the range of 18–27 mV. Transfection efficiencies of these complexes were investigated by expression of the plasmid DNA encoding green fluorescence protein (pEGFP-C2) on human hepatoma cells (Huh 7 cells) compared to N,N,N-trimethyl chitosan chloride (TMChC). The rank of transfection efficiency was MPyMeChC > MDMBzChC > TMChC > MDMCMChC, respectively. The cytotoxicity of these complexes was also studied by MTT assay where the MPyMeChC complex exhibited less toxicity than other derivatives even at high N/P ratios. Therefore, MPyMeChC demonstrated potential as its safe and efficient gene carrier.     

Microwave technique for efficient deacetylation of chitin nanowhiskers to a chitosan nanoscaffold

A chitosan nanoscaffold in the form of a colloidal solution was obtained from the deacetylation of chitin whiskers under alkaline conditions by using a microwave technique in only 1/7 of the treatment time of the conventional method. Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (¹H NMR) techniques confirm the degree of deacetylation to be above 90% within 3 h. The wide-angle X-ray diffraction (WAXD) pattern clearly shows that the highly crystalline chitin whiskers are changed to amorphous chitosan. SEM micrographs show the aggregation of branched nanofibers, whereas the TEM micrographs reveal the scaffold morphology.     

Effect of carboxymethylation conditions on the water-binding capacity of chitosan-based superabsorbents

A superabsorbent polymer (SAP) from chitosan was provided via carboxymethylation of chitosan, followed by cross-linking with glutaraldehyde and freeze-drying. This work was focused on an investigation of the effects of monochloroacetic acid (MCAA), sodium hydroxide, and reaction time on preparation of carboxymethyl chitosan (CMCS). The CMCS products were characterized using FTIR spectroscopy, and their degrees of substitution (DS) were measured using conductimetry and FTIR analysis. The highest DS value was obtained when the carboxymethylation reaction was carried out using 1.75 g MCAA and 1.75 g NaOH per g of chitosan in 4 h. The water solubilities of the CMCS products at various pHs were also evaluated, and the results indicated a significant impact of the reaction parameters on the solubility of CMCS. The CMCSs with the highest DS value resulted in SAPs having the highest water-binding capacity (WBC). The WBC of the best SAP measured after 10 min exposure in distilled water, 0.9% NaCl solution, synthetic urine, and artificial blood was 104, 33, 30, and 57 g/g, respectively. The WBC of this SAP at pH 2-9 passed a maximum at pH 6.     

Synthesis and characterization of a novel MPEG–chitosan diblock copolymer and self-assembly of nanoparticles

In this paper, a simple and novel method based on free-radical polymerization initiated by potassium persulfate (KPS) was developed to synthesize the MPEG–chitosan diblock copolymer (MPEG–CS). The obtained MPEG–CS diblock copolymer was characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (¹H NMR), X-ray diffraction (XRD) and differential scanning calorimetry (DSC), respectively. The MPEG–CS copolymer could self-assemble into nanoparticles in aqueous solution. A typical TEM photography indicated that the well-spherical nanoparticles with diameter at about 200 nm were obtained. In vitro cell culture assay indicated that MPEG–CS nanoparticles are non-toxic and cell-compatible as the polymer concentration was smaller than 0.6 mg/ml. In conclusion, the obtained MPEG–CS nanoparticles might have great potential application in drug-delivery system.     

Immobilizing bifenthrin on wood for termite control

Termites are world-wide pests causing significant losses to annual and perennial crops, as well as damages to wooden components in buildings. Although various chemical, physical, and biological methods have been explored to prevent termite attack on wooden structures, new guiding principles are still needed for environmental protection. In this study, by combining the effective chemical control of bifenthrin and photo-immobilization technique of biomolecules, we developed chitosan as a carrier to embed bifenthrin, which was then immobilized by ultraviolet treatment on the surface of wood (Cunninghamia lanceolata). The immobilized bifenthrin embedded in the photoactive chitosan was characterized by Fourier transform infrared spectroscopy (FTIR), C.H.N analysis, ultraviolet, and fluorescence measurements. The surface structures and biological activity were examined by scanning electron microscopy (SEM), atomic force microscope (AFM), electron spectroscopy for chemical analysis (ESCA), and bioassays. The results indicated that the immobilized bifenthrin can be well protected from free and non-controlled releasing, and has a long-term stability allowing high efficiency against the termite at a dose of 2.5 ??g/cm². This study provides a novel and environmentally-benign technique for the termite control by photo-immobilizing the bifenthrin-embedded chitosan on the surface of C. lanceolata. This technique may be used in combination with the traditional methods for effective termite control.     

Evaluation of Electrostatic Interaction between Lysolecithin and Chitosan in Two-Layer Tuna Oil Emulsions by Nuclear Magnetic Resonance (NMR) Spectroscopy

The main objective of this work was to investigate the electrostatic interaction between lysolecithin and chitosan in two-layer tuna oil-in-water emulsions using nuclear magnetic resonance (NMR) spectroscopy. The influence of chitosan concentration on the stability and properties of these emulsions was also evaluated. The 5 wt% tuna oil one-layer emulsion (lysolecithin-stabilized oil droplets without chitosan) and two-layer emulsions (lysolecithin-chitosan stabilized oil droplets) containing 5 wt% tuna oil, 1 wt% lysolecithin and various chitosan concentrations (0.025–0.40 wt%) were prepared. The one-dimensional (1D) ³¹P and ¹H NMR spectra of emulsions were then recorded at 25 °C. The results showed that addition of chitosan affected the stability and properties of lysolecithin-stabilized one-layer emulsions. The ³¹P NMR peak of the choline head group on lysolecithin molecules disappeared when chitosan was added at concentrations above neutralization concentration (> 0.05 wt%). The ¹H NMR peak intensity monitoring free amino groups (?NH ₃ ⁺) of chitosan showed a strong positive linear relationship to the chitosan concentration with a high correlation coefficient (R² ≈ 0.99). This ¹H NMR peak in emulsions could not be detected for chitosan in emulsions lower than saturation concentration (< 0.15 wt%). These phenomena indicate an electrostatic interaction between lysolecithin and chitosan at droplet surface in emulsion and were consistent with the results from zeta-potential measurements. The T ₂* relaxation time of the choline head group (N-(CH ₃)₃) signal of lysolecithin also confirmed that lysolecithin-chitosan electrostatic interaction occurs at the surface of oil droplets in two-layer emulsions. The results suggest that NMR spectroscopy can be used as an alternative method for monitoring the electrostatic interaction between surfactant and oppositely charged electrolytes or biopolymers in two-layer emulsions.     

Synthesis and characterization of chitosan-based pH-sensitive semi-interpenetrating network microspheres for controlled release of diclofenac sodium

pH-Sensitive semi-interpenetrating networks (IPNs) based on chitosan (Cs) and acrylamide-grafted hydroxyethylcellulose (AAm-g-HEC) were prepared in the form of microspheres (MPs) by emulsion-crosslinking technique using glutaraldehyde (GA) as a crosslinker. Diclofenac sodium (DS) drug was successfully encapsulated into IPN microspheres by varying the ratio of Cs and AAm-g-HEC, % drug loading, and amount of GA. DS encapsulation of up to 83% was obtained as measured by UV spectroscopy. MPs with average particle sizes in the range of 188-310 μm were obtained. MPs were characterized by Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and Differential scanning calorimetry (DSC). Diffusion coefficients (D) of water transport through the microspheres were determined using an empirical equation. In vitro release of DS from these matrices has been investigated in pH 1.2 and 7.4 media.     

Laccase-mediated functionalization of chitosan by caffeic and gallic acids for modulating antioxidant and antimicrobial properties

A new strategy for the functionalization of chitosan with caffeic acid (CA) or gallic acid (GA) using laccase from Trametes versicolor is presented for the first time, yielding a product with modulated antioxidant and antimicrobial properties. UV-vis spectroscopy coupled to HPLC-SEC analysis and cyclic voltammetry kinetic studies showed that laccase catalyzes the oxidation of phenolic acids to electrophilic o-quinones, which undergo new oligomer/polymer-forming structures originated by C-C coupling between the benzene rings and C-O-C coupling involving phenolic side-chains. Furthermore, pH tunable reactions/interactions of the laccases oxidized o-quinones with nucleophilic amino groups of chitosan were determined with FTIR and ¹H NMR spectroscopy's. The highest antioxidant activity was found to be for chitosan modified with phenolic acids at pH 4.5, exhibit also an increased activity against Escherichia coli and Listeria monocytogenes compared to untreated chitosan.     

Production and characterization of bacterial polyhydroxyalkanoate copolymers and evaluation of their blends by fourier transform infrared spectroscopy and scanning electron microscopy

Rhizobium meliloti produced a copolymer of short chain length polyhydroxyalkanoate (scl-PHA) on sucrose and rice bran oil as carbon substrates. Recombinant Escherichia coli (JC7623ABC1J4), bearing PHA synthesis genes, was used to synthesize short chain length-co-medium chain length PHA (scl-co-mcl-PHA) on glucose and decanoic acid. Fourier transform infrared spectroscopy (FTIR) spectra of the PHAs indicated strong characteristic bands at 1282, 1723, and 2934 cm⁻¹ for scl-PHA and at 2933 and 2976 cm⁻¹ for scl-co-mcl-PHA polymer. Differentiation of polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-hydroxyvalerate-P(HB-co-HV) copolymer was obseverd using FTIR, with absorption bands at 1723 and 1281 for PHB, and at 1738, 1134, 1215 cm⁻¹ for HV-copolymer. The copolymers were analyzed by GC and ¹H NMR spectroscopy. Films of polymer blends of PHA produced by R. meliloti and recombinant E. coli were prepared using glycerol, polyethylene glycol, polyvinyl acetate, individually (1:1 ratio), to modify the mechanical properties of the films and these films were evaluated by FTIR and scanning electron microscopy.     

Preparation of N-vanillyl chitosan and 4-hydroxybenzyl chitosan and their physico-mechanical, optical, barrier, and antimicrobial properties

Chitosan derivatives such as N-vanillyl chitosan and 4-hydroxybenzyl chitosan were prepared by reacting chitosan with 4-hydroxy-3-methoxybenzaldehyde (vanillin) and 4-hydroxybenzaldehyde. Amino groups on chitosan reacts with these aldehydes to form a Schiff base intermediate, which is later on converted into N-alkyl chitosans by reduction with sodium cyanoborohydride. The chemical reaction was monitored by ¹H NMR spectroscopy and the absence of aldehydic proton at 9.83 ppm in NMR spectra was observed for both the modified chitosan derivatives confirming the reaction. Modified chitosan films were later prepared by solution casting method and their physico-mechanical, barrier, optical and thermal properties were studied. The results clearly indicated significant change in tensile strength, water vapour transmission rate, and haze properties of modified chitosans. Modified chitosan films were also studied for their antimicrobial activity against Aspergillus flavus. The results showed a marked reduction of aflatoxins produced by the fungus in the presence of the N-vanillyl chitosan and 4-hydroxybenzyl chitosan film discs to 98.9% and non-detectable levels, respectively.     

Probing the structural interactions between methotrexate and dexamethasone with muscle cystatin: a biophysical study

Abstract

Drug protein interactions have gained considerable attention over the past many years. In the current communication the association of muscle cystatin (MC) with anti-rheumatic drugs methotrexate and dexamethasone was studied by thiol proteinase inhibitor assay, ultra violet (UV) absorption, fluorescence spectroscopy, and fluorescence transform infra-red spectroscopy (FTIR). A static pattern of quenching was noticed between muscle cystatin and methotrexate (MTX). Binding constant (K_a) of methotrexate to muscle cystatin was found to be 1?×?10^?7 M^?1 and the stoichiometry of binding was calculated to be one. Fluorescence measurement of the emission quenching reveals that the quenching process of cystatin by dexamethasone (DXN) was also static. The stoichiometry of binding and binding constant was also obtained. Additional evidence regarding MTX–MC and DXN–MC was obtained from UV spectroscopy and FTIR spectroscopic results. Such spectroscopic studies would help in modelling new candidate drugs for rheumatoid arthritis based on their cystatin binding profile.

Communicated by Ramaswamy H. Sarma     

Substituted polyaniline/chitosan composites: Synthesis and characterization

Substituted polyaniline/chitosan(PANIs/Ch) composites were chemically synthesized by using ammonium peroxydisulfate as oxidant and characterized by measurements of conductivity, FTIR, UV–vis, SEM and TGA techniques. FTIR spectra of the composites revealed that there is a strong interaction between substituted polyanilines and chitosan. Among the substituted polyaniline/chitosan composites synthesized, poly(N-ethylaniline)/chitosan PNEANI/Ch has the highest conductivity with a value of 1.68 × 10^?4 S/cm. The P2EANI/Ch composite exhibited higher thermal stability than the other composites. SEM images of the composites showed an agglomerated granular morphology of substituted polyaniline particles coated on the surface of chitosan.     

Synthesize and characterization of organic-soluble acylated chitosan

Acylated chitosan was synthesized by reaction of chitosan and stearoyl chloride. The chemical structures and physical properties of the prepared compounds were confirmed by Fourier transform infrared (FT-IR), ¹H Nuclear Magnetic Resonance (¹H NMR) spectroscopy, X-ray diffraction (XRD) and Thermogravimetric (TG) techniques. The degree of substitution (DS) was calculated by ¹H NMR and ranged from 1.8 to 3.8. The synthesized compounds exhibited an excellent solubility in organic solvents. XRD analysis showed that they had high crystalline structure. TG results demonstrated that thermal stability of the prepared compounds was lower than that of chitosan, the weight loss decreased with increase of DS. This procedure could be a facile method to prepare organic-soluble chitosan derivatives.