Melting of individual lipid components in binary lipid mixtures studied by FTIR spectroscopy, DSC and Monte Carlo simulations

Monte Carlo (MC) simulations, Differential Scanning Calorimetry (DSC) and Fourier Transform InfraRed (FTIR) spectroscopy were used to study the melting behavior of individual lipid components in two-component membranes made of DMPC and DSPC. We employed Monte Carlo simulations based on parameters obtained from DSC profiles to simulate the melting of the different lipids as a function of temperature. The simulations show good agreement with the FTIR data recorded for deuterated and non-deuterated lipids, which demonstrates that the information on the differential melting of the individual components is already contained in the calorimetric profiles. In mixtures, both lipids melt over a wide temperature range. As expected, the lipid melting events of the lipid with the lower melting temperature occur on average at lower temperatures. The simulations also yield information on the lateral distribution of the lipids that is neither directly contained in the DSC nor in the FTIR data. In the phase coexistence region, liquid disordered domains are typically richer in the lower-melting-temperature lipid species.     

Anthracycline-DNA interactions studied with linear dichroism and fluorescence spectroscopy

DNA-binding geometry and dynamics of a number of anthracyclines, including adriamycin and 4-demethoxydaunorubicin, interacting with DNA have been studied by means of linear dichroism and fluorescence techniques. The anthracycline chromophore is found to be approximately parallel to the plane of the DNA bases and to have a restricted mobility, as would be expected for an intercalative binding mode, but there are variations between different directions in the chromophore as well as between the drugs. From dichroic spectra of adriamycin in an anisotropic host of poly(vinyl alcohol), absorption components corresponding to transitions with mutually orthogonal polarizations have been resolved. These can be exploited to determine the orientations of the two chromophore axes in the DNA complex relative to the DNA helix axis. In a certain binding regime the long axis of the bound anthracycline chromophores (with the exception of 4-demethoxydaunorubicin) is found to be approximately 10 degrees closer to perpendicular to the helix axis than are the DNA bases. This demonstrates that the average base tilt is at least 10 degrees. By contrast, the short axis of the aglycon moiety is found to be tilted some 20-30 degrees from perpendicular. This may be because it is probing a base direction with a more pronounced, static or dynamic, inclination than the average in DNA. The drug orientation and the DNA orientation (reflecting flexibility) are observed to vary differently and nonmonotonically with binding ratio, suggesting specific binding and varying site geometries.(ABSTRACT TRUNCATED AT 250 WORDS)     

UVB radiation induced effects on cells studied by FTIR spectroscopy

We have made a preliminary analysis of the results about the effects on tumoral cell line (lymphoid T cell line Jurkat) induced by UVB radiation (dose of 310 mJ/cm²) with and without a vegetable mixture. In the present study, we have used two techniques: Fourier transform infrared spectroscopy (FTIR) and flow cytometry. FTIR spectroscopy has the potential to provide the identification of the vibrational modes of some of the major compounds (lipid, proteins and nucleic acids) without being invasive in the biomaterials. The second technique has allowed us to perform measurements of cytotoxicity and to assess the percentage of apoptosis. We already studied the induction of apoptotic process in the same cell line by UVB radiation; in particular, we looked for correspondences and correlations between FTIR spetroscopy and flow cytometry data finding three highly probable spectroscopic markers of apoptosis (Pozzi et al. in Radiat Res 168:698–705, 2007). In the present work, the results have shown significant changes in the absorbance and spectral pattern in the wavenumber protein and nucleic acids regions after the treatments.     

Solvent-dependent structure of two tryptophan-rich antimicrobial peptides and their analogs studied by FTIR and CD spectroscopy

Structural changes for a series of antimicrobial peptides in various solvents were investigated by a combined approach of FTIR and CD spectroscopy. The well-characterized and potent antimicrobial peptides indolicidin and tritrpticin were studied along with several analogs of tritrpticin, including Tritrp1 (amidated analog of tritrpticin), Tritrp2 (analog of Tritrp1 with Arg → Lys substitutions), Tritrp3 (analog of Tritrp1 with Pro → Ala substitutions) and Tritrp4 (analog of Tritrp1 with Trp → Tyr substitutions). All peptides were studied in aqueous buffer, ethanol and in the presence of dodecylphosphocholine (DPC) micelles. It was shown that tritrpticin and its analogs preferentially adopt turn structures in all solvents studied. The turn structures formed by the tritrpticin analogs bound to DPC micelles are more compact and more conformationally restricted compared to indolicidin. While several peptides showed a slight propensity for an α-helical conformation in ethanol, this trend was only strong for Tritrp3, which also adopted a largely α-helical structure with DPC micelles. Tritrp3 also demonstrated along with Tritrp1 the highest ability to interact with DPC micelles, while Tritrp2 and Tritrp4 showed the weakest interaction.     

Structure of calcium and zinc pectinate films investigated by FTIR spectroscopy

Calcium and zinc pectinate gels were prepared using a method which allowed calcium or zinc to diffuse from the cross-linking solution through a dialysis membrane to form a gel with amidated low-methoxyl pectin. The gel thus obtained was then dried, and the film structure was studied using FTIR spectroscopy as a function of the cation content (0%, 5%, 10%, and 15% w/v). Important consideration was given to the three functional groups (amide, carboxyl ester, and carboxylate groups) present in the pectin. When the zinc content was increased, the three wavenumber values corresponding to these three functional groups did not change significantly, while for calcium pectinate, the three wavenumber values were shifted profoundly when the amount of calcium ions changed. These results confirm that calcium ions could form stable interactions with carboxylate groups as described by the eggbox model [Grant, G.T.; Morris, E.R.; Rees, D.A.; Smith, P.J.C.; Tho, D. FEBS Lett.1973, 32, 195-198] while the lower coordination number of zinc does not permit a structured gel to develop.     

Some recent contributions of FTIR difference spectroscopy to the study of cytochrome oxidase

In this minireview, some of the new findings using infrared spectroscopy to study cytochrome oxidase will be reviewed, with an emphasis on those studies involving our laboratory.     

DNA interaction with human serum albumin studied by affinity capillary electrophoresis and FTIR spectroscopy

The question addressed in this study is how does the protein-DNA complexation affect the structure and dynamics of DNA and protein in aqueous solution. We examined the interaction of calf-thymus DNA with human serum albumin (HSA) in aqueous solution at physiological conditions, using constant DNA concentration of 12.5 mM (phosphate) and various HSA contents 0.25 to 2% or 0.04 to 0.3 mM. Affinity capillary electrophoresis and FTIR spectroscopic methods were used to determine the protein binding mode, the association constant, sequence preference, and the biopolymer secondary structural changes in the HSA-DNA complexes. Spectroscopic evidence showed two types of HSA-DNA complexes with strong binding of K(1) = 4.5 x 10(5) M(-1) and weak binding of K(2) = 6.10 x 10(4) M(-1). The two major binding sites were located on the G-C bases and the backbone PO(2) group. The protein-DNA interaction stabilizes the HSA secondary structure. A minor alteration of B-DNA structure was observed, while no major protein conformational changes occurred.     

Schiff base of gossypol with 3,6,9-trioxa-decylamine complexes with monovalent cations studied by mass spectrometry, (1)H-NMR, FTIR, and PM5 semiempirical methods

A new Schiff base of gossypol with 3,6,9-trioxo-decylamine (GSTB) forms stable complexes with monovalent cations. This process of complex formation was studied by electrospray ionization mass spectrometry, (1)H-NMR and FTIR spectroscopy, and the PM5 (parametric method 5) semiempirical method. It is found that GSTB forms 1 : 1 and 1 : 2 complexes with Li(+) and Na(+) and 1 : 1 complexes with K(+), Rb(+), or Cs(+) cations and exists in all these complexes in the enamine-enamine tautomeric form. Moreover, within these complexes only Li(+) cations can fluctuate between the oxygen atoms of trioxo-alkyl chains. All other cations are strongly localized. In the complex of GSTB with two protons localized on the N atoms of the Schiff base, the imine-imine tautomeric form is realized. The complexes of the Schiff base with K(+), Rb(+), or Cs(+) cations are the 1 : 1 type with the oxygen atoms of the trioxo-alkyl chains, as well as the O(1)H or O(1')H group coordinating the cation. The structures of the complexes are calculated by the PM5 semiempirical method and discussed.     

Using FTIR spectroscopy to model alkaline pretreatment and enzymatic saccharification of six lignocellulosic biomasses

Fourier transform infrared, attenuated total reflectance (FTIR-ATR) spectroscopy, combined with partial least squares (PLS) regression, accurately predicted solubilization of plant cell wall constituents and NaOH consumption through pretreatment, and overall sugar productions from combined pretreatment and enzymatic hydrolysis. PLS regression models were constructed by correlating FTIR spectra of six raw biomasses (two switchgrass cultivars, big bluestem grass, a low-impact, high-diversity mixture of prairie biomasses, mixed hardwood, and corn stover), plus alkali loading in pretreatment, to nine dependent variables: glucose, xylose, lignin, and total solids solubilized in pretreatment; NaOH consumed in pretreatment; and overall glucose and xylose conversions and yields from combined pretreatment and enzymatic hydrolysis. PLS models predicted the dependent variables with the following values of coefficient of determination for cross-validation (Q2): 0.86 for glucose, 0.90 for xylose, 0.79 for lignin, and 0.85 for total solids solubilized in pretreatment; 0.83 for alkali consumption; 0.93 for glucose conversion, 0.94 for xylose conversion, and 0.88 for glucose and xylose yields. The sugar yield models are noteworthy for their ability to predict overall saccharification through combined pretreatment and enzymatic hydrolysis per mass dry untreated solids without a priori knowledge of the composition of solids. All wavenumbers with significant variable-important-for-projection (VIP) scores have been attributed to chemical features of lignocellulose, demonstrating the models were based on real chemical information. These models suggest that PLS regression can be applied to FTIR-ATR spectra of raw biomasses to rapidly predict effects of pretreatment on solids and on subsequent enzymatic hydrolysis.     

Cellulose acetate membrane electrophoresis and FTIR spectroscopy as methods of identifying a fucoidan in Fucusvesiculosus Linnaeus

A fucoidan from brown algae such as the common bladder wrack (Fucusvesiculosus Linnaeus) is now widely examined in many countries for its interesting biological and therapeutic properties. In this study, the fucoidan was identified during extraction in hydrochloric acid; its presence was confirmed by FTIR spectroscopy. Two slightly different structures were found in real samples of dried bladder wrack supplied by Flos and Witherba, by comparing them with a reference sample of F. vesiculosus L. A simple, repeatable analytical procedure was developed using apparatus for cellulose acetate membrane electrophoresis and this was supplemented by semi-quantitative analysis.     

High-throughput analysis of the plasmid bioproduction process in Escherichia coli by FTIR spectroscopy

Monitoring plasmid production systems is a lab intensive task. This article proposes a methodology based on FTIR spectroscopy and the use of chemometrics for the high-throughput analysis of the plasmid bioproduction process in E. coli. For this study, five batch cultures with different initial medium compositions are designed to represent different biomass and plasmid production behavior, with the maximum plasmid and biomass concentrations varying from 11 to 95 mg L(-1) and 6.8 to 12.8 g L(-1), respectively, and the plasmid production per biomass varying from 0.4 to 5.1 mg g(-1). After a short sample processing consisting of centrifugation and dehydration, the FTIR spectra are recorded from the collected cellular biomass using microtiter plates with 96 wells. After spectral pre-processing, the predictive FTIR spectra models are derived by using partial least squares (PLS) regression with the wavenumber selection performed by a Monte-Carlo strategy. Results show that it is possible to improve the PLS models by selecting specific spectral ranges. For the plasmid model, the spectral regions between 590-1,130, 1,670-2,025, and 2,565-3,280 cm(-1) are found to be highly relevant. Whereas for the biomass, the best wavenumber selections are between 900-1,200, 1,500-1,800, and 2,850-3,200 cm(-1). The optimized PLS models show a high coefficient of determination of 0.91 and 0.89 for the plasmid and biomass concentration, respectively. Additional PLS models for the prediction of the carbon sources glucose and glycerol and the by-product acetic acid, based on metabolism-induced correlations between the nutrients and the cellular biomass are also established.     

Conformational studies of alanine-rich peptide using CD and FTIR spectroscopy.

The circular dichroism (CD) and Fourier transform infrared (FTIR) methods were applied to the conformational studies of alanine-rich peptide Ac-K-[A]11-KGGY-NH2 (where K is lysine, A is alanine, G is glycine and Y is tyrozyne) in water, methanol (MeOH) and trifluoroethanol (TFE). The analysis of CD-spectra of the peptide in water at different concentrations revealed that the secondary structure content depends on the peptide concentration and pH of the solution. The increase of the peptide concentration causes a decrease of alpha-helix content and, simultaneously, an increase of beta-sheet structure, while the unordered structure is the predominant one. Additional elements are discovered in MeOH and TFE but alpha-helix and beta-turns predominate. Moreover, in these solutions the percentage content of the secondary structure does not depend on the temperature. FTIR measurements, carried out at higher peptide concentration (about one order of magnitude) than these CD measurements mentioned above, revealed that in water solution the solid state beta-sheet, and aggregated structures, dominate. However, in TFE the most abundant are alpha-helix and beta-turns structures. The thioflavine T assay showed the tendency of the studied peptide for aggregate.     

Characterization of different compost extracts using Fourier-transform infrared spectroscopy (FTIR) and thermal analysis

Compost extract or “compost tea” is a liquid extract of compost obtained by mixing compost and water for a defined period of time. Compost tea contains nutrients and a range of different organisms and is applied to the soil or directly to plants with the principal aim of suppressing certain plant diseases. In addition, the application of compost tea supplies nutrients and organic matter to the soil. Thermal analysis and Fourier transform infrared spectroscopy (FTIR) are two widely applied analytical techniques for establishing the stability of compost, and although numerous studies have evaluated the capacity of compost tea to suppress plant diseases, there are no studies employing these techniques to characterize compost-tea. For the present study, 12 compost extracts were produced under varying conditions in a purpose-built reactor. Two different composts, an stable compost produced from manure and an unstable compost produced from municipal solid waste, respectively, two aeration systems (aerated and non-aerated extracts) and three temperatures (10, 20 and 30°C) were used in these experiments. The extracts were freeze-dried and subsequently analysed, together with the two composts, by means of FTIR and thermal analysis. Extracts produced from high stability compost, independently of the conditions of aeration and temperature, showed very similar results. In contrast, differences among extracts produced from the unstable compost were more noticeable. However, the different conditions of aeration and temperature during the production of the extracts only explained partially these differences, since the transformations undergone by compost over the 3 months that the experiments lasted were also reflected in the composition of the extracts. In spite of everything, extraction process favoured the degradation of easily oxidizable organic matter, which was more abundant in unstable compost. This degradation was more intense for non-aerated processes, probably due to the longer duration of these (10 days) with respect to aerated extractions (2 days). The effect of temperature was not clear in these experiments, although high temperatures could increase micro organism activity and consequently favour the degradation of easily oxidizable organic matter.     

Use of FTIR spectroscopy to distinguish between capsular types and capsular quantities in Streptococcus pneumoniae

Fourier transform infrared (FTIR) spectroscopy has shown remarkable ability in distinguishing between bacterial species and identifying bacterial colony structures, when used in tandem with methods such as cluster analysis, principal component analysis, or linear discriminant analysis. The present work was aimed to evaluate the potential of FTIR-microscopy (FTIR-MSP) to distinguish between different serotypes and capsular quantities of Streptococcus pneumoniae. In general, the results obtained have consistently proven that the spectral information at the region 900-1,185 cm(-1) was sufficient to distinguish between various pneumococcal serotypes. Moreover, the method was able to differentiate between S. pneumoniae phase variants on the basis of their relative carbohydrate content. The unsupervised cluster analysis of the samples showed differences, not only in the carbohydrate content, but also in the region 1,350-1,480 cm(-1), which is dominated by absorptions due to lipids and phospholipids. This approach proved to be useful for the distinction between S. pneumoniae serotypes and between phase variants, which were shown to acquire different pathogenic capacity.     

Long-distance cofactor interactions in terminal oxidases studied by second-derivative absorption spectroscopy

The electronic transitions of the two heme groups of cytochromec oxidase have been resolved by application of second-derivative and cryogenic absorption spectroscopy. Both methods reveal a splitting of the ferrocytochromea Soret transition into two features at 443 and 450 nm. The relative intensity of the 450 nm feature appears to depend on the ligation state of cytochromea ₃, the solution pH, and complex formation with cytochromec. The structural origin and mechanistic significance of this second Soret transition of cytochromea are discussed in terms of the electron transfer and proton translocation activities of the enzyme.Dedicated to the memory of James Carl Copeland.     

Aggregation kinetics of bovine serum albumin studied by FTIR spectroscopy and light scattering

To investigate which type of structural and conformational changes is involved in the aggregation processes of bovine serum albumin (BSA), we have performed thermal aggregation kinetics in D(2)O solutions of this protein. The tertiary conformational changes are followed by Amide II band, the secondary structural changes and the formation of beta-aggregates by the Amide I' band and, finally, the hydrodynamic radius of aggregates by dynamic light scattering. The results show, as a function of pD, that: tertiary conformational changes are more rapid as pD increases; the aggregation proceeds through formation of ordered aggregates (oligomers) at pD far from the isoelectric point of the protein; disordered structures add as the pD decreases. Moreover, beta-aggregates seem to contribute only to oligomers formation, as showed by the good correlation between kinetics of scattering intensity and IR absorption intensity. These results indicate for BSA a general mechanism of aggregation composed by partial unfolding of the tertiary structure and by the decrease of alpha-helix and random coil contents in favor of beta-sheet aggregates. This mechanism strictly depends on pD and gives rise to almost two distinct types of macromolecular aggregates.