The pediocin AcH precursor is biologically active.

The properties of the pediocin AcH precursor, prepediocin AcH, have been studied to gain insight into how producer cells may protect themselves from the activity of intracellular prebacteriocins. The native 62-amino-acid precursor and the 44-amino-acid mature species were expressed in Escherichia coli host strains that lack the leader peptide processing enzyme, PapD. Both forms inhibited the growth of the test bacterium Listeria innocua Lin11, indicating that the native precursor is biologically active. The two species also were synthesized in the context of maltose-binding protein chimeric proteins to facilitate the measurement of their relative specific activities. The chimeric form of the precursor was approximately 80% as active as the chimeric mature species. Of relevance to cell protection and pediocin AcH production, it was determined that the precursor is strongly susceptible to inactivation by reducing agents and to degradation by chymotrypsin and endogenous E. coli proteases. Taken together, the results indicate that the activity of prepediocin AcH may have to be controlled prior to secretion to prevent toxicity to the host. Perhaps producer cells avoid membrane damage by maintaining the precursor in a reduced inactive state or by degrading molecules whose secretion is delayed.     

Production of Active Chimeric Pediocin AcH in Escherichia coli in the Absence of Processing and Secretion Genes from the Pediococcus pap Operon

Minimum requirements have been determined for synthesis and secretion of the Pediococcus antimicrobial peptide, pediocin AcH, in Escherichia coli. The functional mature domain of pediocin AcH (Lys⁺¹ to Cys⁺⁴⁴) is targeted into the E. coli sec machinery and secreted to the periplasm in active form when fused in frame to the COOH terminus of the secretory protein maltose-binding protein (MBP). The PapC-PapD specialized secretion machinery is not required for secretion of the MBP-pediocin AcH chimeric protein, indicating that in Pediococcus, PapC and PapD probably are required for recognition and processing of the leader peptide rather than for translocation of the mature pediocin AcH domain across the cytoplasmic membrane. The chimeric protein displays bactericidal activity, suggesting that the NH₂ terminus of pediocin AcH does not span the phospholipid bilayer in the membrane-interactive form of the molecule. However, the conserved Lys⁺¹-Tyr-Tyr-Gly-Asn-Gly-Val⁺⁷-sequence at the NH₂ terminus is important because deletion of this sequence abolishes activity. The secreted chimeric protein is released into the culture medium when expressed in a periplasmic leaky E. coli host. The MBP fusion-periplasmic leaky expression system should be generally advantageous for production and screening of the activity of bioactive peptides.     

Nucleotide and amino acid sequence of pap-gene (pediocin AcH production) in Pediococcus acidilactici H

N-terminal analysis of purified pediocin AcH produced a partial sequence of 23 amino acids. This sequence matched perfectly with a segment of 23 amino acids in a 62 amino acid molecule generated from the 186 nucleotide sequence open reading frame in a Hind III fragment in pSMB74 encoding pap-gene (pediocin AcH production). It is suggested that the molecule is translated as inactive prepediocin AcH of 62 amino acids. Then through enzymatic modifications the leader segment of 18 amino acids is removed from the NH2-terminal. The remaining segment of 44 amino acids is active pediocin AcH of 4628 M(r).     

Secretion of Recombinant Pediocin PA-1 by Bifidobacterium longum, Using the Signal Sequence for Bifidobacterial α-Amylase

A recombinant DNA, encoding the chimeric protein of the signal sequence for bifidobacterial α-amylase mature pediocin PA-1, was introduced into Bifidobacterium longum MG1. Biologically active pediocin PA-1 was successfully secreted from the strain and showed bactericidal activity against Listeria monocytogenes and the same molecular mass as native pediocin PA-1.     

Cloning and Expression of the Pediocin Operon in Streptococcus thermophilus and Other Lactic Fermentation Bacteria

Production of pediocin in Pediococcus acidilactici is associated with pMBR1.0, which encodes prepediocin, a pediocin immunity protein, and two proteins involved in secretion and precursor processing. These four genes are organized as an operon under control of a single promoter. We have constructed shuttle vectors that contain all four structural genes, the chromosomal promoter ST_P2201 from Streptococcus thermophilus, and repA from the 2-kbp S. thermophilus plasmid pER8. The recombinant plasmid, pPC318, expressed and secreted active pediocin in Escherichia coli. Streptococcus thermophilus, Lactococcus lactis subsp. lactis, and Enterococcus faecalis were electrotransformed with pPC418, a modified vector fitted with an erythromycin resistance tracking gene. Pediocin was produced and secreted in each of the lactic acid bacteria, and production was stable for up to ten passages. The expression of pediocin in dairy fermentation microbes has important implications for bacteriocins as food preservatives in dairy products. Received: 7 June 1999 / Accepted: 6 July 1999     

Complete nucleotide sequence of pSMB 74, a plasmid encoding the production of pediocin AcH in Pediococcus acidilactici

Several Pediococcus acidilactici strains produce a plasmid-encoded bacteriocin, pediocin AcH. Previous studies have shown that this plasmid, designated as pSMB 74, encodes genes associated with the production of prepediocin, its post-translation processing to pediocin AcH, transmembrane translocation of these molecules, and immunity of producer cells against pediocin AcH. We report here the complete nucleotide sequence of pSMB 74. The plasmid has a total of 8877 bp. Four genes have been located on pSMB 74. The genes are arranged in a gene cluster of 3500 bp and share a common promoter and rho-independent stem-loop terminator. The four genes, each with independent ribosome binding sites (rbs), initiation and termination codons and spacer sequences in between, were designated as pap A, pap B, pap C and pap D and encode respectively for proteins of 62, 112, 174 and 724 amino acids. The results of this study can be useful either to introduce a suitable marker at a unique restriction site in pSMB 74 and use it as a vector or to clone the pap gene cluster in a suitable plasmid and transform desirable strains for pediocin AcH production. The gene sequence has been submitted to Gene Bank (Acc. No. U02482).     

Nisin-Controlled Production of Pediocin PA-1 and Colicin V in Nisin- and Non-Nisin-Producing Lactococcus lactis Strains

The introduction of chimeric genes encoding the fusion leader of lactococcin A-propediocin PA-1 or procolicin V under the control of the inducible nisA promoter and the lactococcin A-dedicated secretion genes (lcnCD) into Lactococcus lactis strains, including a nisin producer, expressing the two component regulator NisRK led to the production or pediocin PA-1 or colicin V, respectively.     

Isolation and Characterization of Pediocin AcH Chimeric Protein Mutants with Altered Bactericidal Activity

A collection of pediocin AcH amino acid substitution mutants was generated by PCR random mutagenesis of DNA encoding the bacteriocin. Mutants were isolated by cloning mutagenized DNA into an Escherichia coli malE plasmid that directs the secretion of maltose binding protein-pediocin AcH chimeric proteins and by screening transformant colonies for bactericidal activity against Lactobacillus plantarum NCDO955 (K. W. Miller, R. Schamber, Y. Chen, and B. Ray, 1998. Appl. Environ. Microbiol. 64:14–20, 1998). In all, 17 substitution mutants were isolated at 14 of the 44 amino acids of pediocin AcH. Seven mutants (N5K, C9R, C14S, C14Y, G37E, G37R, and C44W) were completely inactive against the pediocin AcH-sensitive strains L. plantarum NCDO955, Listeria innocua Lin11, Enterococcus faecalis M1, Pediococcus acidilactici LB42, and Leuconostoc mesenteroides Ly. A C24S substitution mutant constructed by other means also was inactive against these bacteria. Nine other mutants (K1N, W18R, I26T, M31T, A34D, N41K, H42L, K43N, and K43E) retained from <1% to ~60% of wild-type activity when assayed against L. innocua Lin11. One mutant, K11E, displayed ~2.8-fold-higher activity against this indicator. About one half of the mutations mapped to amino acids that are conserved in the pediocin-like family of bacteriocins. All four cysteines were found to be required for activity, although only C9 and C14 are conserved among pediocin-like bacteriocins. Several basic amino acids as well as nonpolar amino acids located within the hydrophobic C-terminal region also were found to be important. The mutations are discussed in the context of structural models that have been proposed for the bacteriocin.     

Analysis of the pediocin AcH gene cluster from plasmid pSMB74 and its expression in a pediocin-negative Pediococcus acidilactici strain.

The 3,500-bp pap operon in the 8,877-bp plasmid pSMB74 contains a cluster of four genes, papABCD, of which papA encodes prepediocin (A. M. Motlagh, M. Bukhtiyarova, and B. Ray, Lett. Appl. Microbiol. 18:305-312, 1994). The cluster without the promoter was cloned in the shuttle vector pHPS9. An Escherichia coli strain and a pediocin-sensitive Pediococcus acidilactici strain transformed with the recombinant plasmid, pMBR1.0, produced pediocin AcH. Deletion analysis by introducing mutations in the four genes in pMBR1.0 revealed that only papA and papD were required for pediocin AcH production and that the gene product of papD has both translocation and processing functions. In the transformed minicells of E. coli chi 925 the proteins of the pap cluster were synthesized, indicating no polar effect due to deletion.     

Establishing recombinant production of pediocin PA-1 in Corynebacterium glutamicum

Bacteriocins are antimicrobial peptides produced by bacteria to inhibit competitors in their natural environments. Some of these peptides have emerged as commercial food preservatives and, due to the rapid increase in antibiotic resistant bacteria, are also discussed as interesting alternatives to antibiotics for therapeutic purposes. Currently, commercial bacteriocins are produced exclusively with natural producer organisms on complex substrates and are sold as semi-purified preparations or crude fermentates. To allow clinical application, efficacy of production and purity of the product need to be improved. This can be achieved by shifting production to recombinant microorganisms.Here, we identify Corynebacterium glutamicum as a suitable production host for the bacteriocin pediocin PA-1. C. glutamicum CR099 shows resistance to high concentrations of pediocin PA-1 and the bacteriocin was not inactivated when spiked into growing cultures of this bacterium. Recombinant C. glutamicum expressing a synthetic pedACD^Cgl operon releases a compound that has potent antimicrobial activity against Listeria monocytogenes and Listeria innocua and matches size and mass:charge ratio of commercial pediocin PA-1. Fermentations in shake flasks and bioreactors suggest that low levels of dissolved oxygen are favorable for production of pediocin. Under these conditions, however, reduced activity of the TCA cycle resulted in decreased availability of the important pediocin precursor l-asparagine suggesting options for further improvement. Overall, we demonstrate that C. glutamicum is a suitable host for recombinant production of bacteriocins of the pediocin family.     

Biochemical and Genetic Characterization of Coagulin, a New Antilisterial Bacteriocin in the Pediocin Family of Bacteriocins, Produced by Bacillus coagulans I4

A plasmid-linked antimicrobial peptide, named coagulin, produced by Bacillus coagulans I₄ has recently been reported (B. Hyronimus, C. Le Marrec and M. C. Urdaci, J. Appl. Microbiol. 85:42–50, 1998). In the present study, the complete, unambiguous primary amino acid sequence of the peptide was obtained by a combination of both N-terminal sequencing of purified peptide and the complete sequence deduced from the structural gene harbored by plasmid I₄. Data revealed that this peptide of 44 residues has an amino acid sequence similar to that described for pediocins AcH and PA-1, produced by different Pediococcus acidilactici strains and 100% identical. Coagulin and pediocin differed only by a single amino acid at their C terminus. Analysis of the genetic determinants revealed the presence, on the pI₄ DNA, of the entire 3.5-kb operon of four genes described for pediocin AcH and PA-1 production. No extended homology was observed between pSMB74 from P. acidilactici and pI₄ when analyzing the regions upstream and downstream of the operon. An oppositely oriented gene immediately dowstream of the bacteriocin operon specifies a 474-amino-acid protein which shows homology to Mob-Pre (plasmid recombination enzyme) proteins encoded by several small plasmids extracted from gram-positive bacteria. This is the first report of a pediocin-like peptide appearing naturally in a non-lactic acid bacterium genus.     

Secretion of recombinant pediocin PA-1 by Bifidobacterium longum, using the signal sequence for bifidobacterial alpha-amylase

A recombinant DNA, encoding the chimeric protein of the signal sequence for bifidobacterial alpha-amylase mature pediocin PA-1, was introduced into Bifidobacterium longum MG1. Biologically active pediocin PA-1 was successfully secreted from the strain and showed bactericidal activity against Listeria monocytogenes and the same molecular mass as native pediocin PA-1.     

Influence of Growth Conditions on the Production of a Bacteriocin, Pediocin AcH, by Pediococcus acidilactici H

The influence of growth parameters on the production of pediocin AcH by Pediococcus acidilactici H was studied. This strain produced large quantities of pediocin AcH in TGE broth (Trypticase [1%], glucose [1%], yeast extract [1%], Tween 80 [0.2%], Mn²⁺ [0.033 mM], Mg²⁺ [0.02 mM] [pH 6.5]) within 16 to 18 h at 30 to 37°C (final pH, 3.6 to 3.7). Pediocin AcH production was negligible when the pH of the medium was maintained at 5.0 or above, even in the presence of high cell mass.     

Production of Pediocin PA-1 by Lactococcus lactis Using the Lactococcin A Secretory Apparatus

The class II bacteriocins pediocin PA-1, from Pediococcus acidilactici, and lactococcin A, from Lactococcus lactis subsp. lactis bv. diacetylactis WM4 have a number of features in common. They are produced as precursor peptides containing similar amino-terminal leader sequences with a conserved processing site (Gly-Gly at positions −1 and −2). Translocation of both bacteriocins occurs via a dedicated secretory system. Because of the strong antilisterial activity of pediocin PA-1, its production by lactic acid bacteria strains adapted to dairy environments would considerably extend its application in the dairy industry. In this study, the lactococcin A secretory system was adapted for the expression and secretion of pediocin PA-1. A vector containing an in-frame fusion of sequences encoding the lcnA promoter, the lactococcin A leader, and the mature pediocin PA-1, was introduced into L. lactis IL1403. This strain is resistant to pediocin PA-1 and encodes a lactococcin translocation apparatus. The resulting L. lactis strains secreted a bacteriocin with an antimicrobial activity of approximately 25% of that displayed by the parental pediocin-producing P. acidilactici 347. A noncompetitive indirect enzyme-linked immunosorbent assay with pediocin PA-1-specific antibodies and amino-terminal amino acid sequencing confirmed that pediocin PA-1 was being produced by the heterologous host.Bacteriocins of lactic acid bacteria have received considerable attention in recent years due to their potential application in the food industry as natural preservatives. Most interest has focused on lantibiotics (class I bacteriocins), e.g., nisin, and small heat-stable non-lanthionine-containing bacteriocins (class II) (22, 23). A major subgroup of class II bacteriocins (IIa) has been given the generic name of pediocin family (28) after its most extensively studied member, pediocin PA-1. Members of this class have a number of features in common, including a very strong antimicrobial activity against Listeria species (28). The food-borne pathogen Listeria monocytogenes is a major concern in the dairy industry since it can grow in a variety of dairy products at low temperature and pH (13). Although a pediocin PA-1-producing Lactobacillus plantarum strain has recently been isolated (12), this bacteriocin is generally produced by Pediococcus acidilactici strains of meat origin (3, 16, 18, 29, 31). Because of its antilisterial activity, the expression of pediocin PA-1 in strains of dairy origin would be highly desirable.Pediocin PA-1 production, immunity, and secretion are determined by an operon containing four genes (26). The structural gene, pedA, encodes the pediocin PA-1 precursor, pedB specifies immunity, and the pedC and pedD gene products are membrane-bound proteins required for secretion of the active peptide (39). Homologs of these genes have been described for related peptides. Biosynthesis of the well-characterized class II bacteriocin, lactococcin A, produced by strains of Lactococcus lactis also involves four genes (20, 36, 40). In addition to the structural gene (lcnA) and immunity gene (lciA), there are two genes (lcnC and lcnD) whose products together form a transport system dedicated to the translocation of lactococcin through the host membrane. The LcnC protein belongs to the family of ATP-binding cassette transporter proteins (40), and LcnD acts as an accessory protein (14). These two proteins have considerable homology to PedD and PedC, respectively (39), suggesting that the latter proteins play a similar role in the transport of active pediocin. The two bacteriocins also share the double glycine-processing site found in many lactic acid bacteria class II bacteriocins, some lantibiotics, and the Escherichia coli bacteriocin, colicin V (17).Van Belkum et al. (38) have recently investigated the role of leader sequences of the class II bacteriocins in the recognition of the precursor peptide by the dedicated translocation machinery of the host organism. By constructing hybrid genes, they demonstrated that the leader peptides of leucocin A, lactococcin A, and colicin V, which are cleaved at the Gly-Gly (positions −2 and −1) site, can direct the secretion of the nonrelated bacteriocin divergicin A. Our studies have focused on the class II bacteriocins pediocin PA-1 and lactococcin A. Since these peptides have a number of features in common, it might be expected that a pediocin PA-1 precursor could be secreted and processed by using the lactococcin A translocation machinery. L. lactis IL1403 is a plasmid-free strain that does not produce bacteriocin but contains chromosomal copies of genes analogous to lcnC and lcnD (33, 40). In addition, the natural resistance of this strain to pediocin PA-1 (8) makes it an ideal candidate for a production host to investigate the expression of pediocin PA-1 in lactococci.This paper describes the development of an expression system geared to the production of heterologous peptides in L. lactis. Testing the system with pediocin PA-1 involved the construction of a vector containing an in-frame fusion between sequences encoding the lactococcin A leader and the structural part of mature pediocin PA-1. The hybrid genes were introduced into L. lactis IL1403, and the ability of these strains to produce and secrete pediocin PA-1 was investigated.     

Modeling the batch bacteriocin production system by lactic acid bacteria by using modified three-dimensional Lotka–Volterra equations

Different batch cultures of Lactococcus lactis CECT 539, a nisin-producing strain, were carried out in culture media prepared with whey and mussel processing wastes. From these cultures, a reasonable system of differential equations, similar to the three-dimensional Lotka–Volterra two predators-one prey model, was set up to describe, for the first time, the relationship between the absolute rates of growth, pH drop and nisin production.Thus, the nisin production system was described as a three-species (pH, biomass and nisin) ecosystem. In this case, both nisin and biomass production were considered as two pH-dependent species that compete for the nitrogen source. Excellent agreement (R² values ≥0.9885) resulted between model predictions and the experimental data, and significant values for all the model parameters were obtained. The developed model was demonstrated (R² values ≥0.9874) for five batch cultivations of the strains L. lactis CECT 539 in MRS broth and Lactobacillus sakei LB 706 (sakacin A producer), Pediococcus acidilactici LB42-923 (pediocin AcH producer), L. lactis ATCC 11454 (nisin producer) and Leuconostoc carnosum Lm1 (leuconocin Lcm1 producer) in TGE broth. These results suggest that the batch bacteriocin production system in these culture media can be successfully described by using the Lotka–Volterra approach.     

Structural and functional properties of chimeric EspA-FliCi filaments of EPEC

Enteropathogenic Escherichia coli utilise a filamentous type III secretion system to translocate effector proteins into host gut epithelial cells. The primary constituent of the extracellular component of the filamentous type III secretion system is EspA. This forms a long flexible helical conduit between the bacterium and host and has a structure almost identical to that of the flagella filament. We have inserted the D3 domain of FliCi (from Salmonella typhimurium) into the outer domain of EspA and have studied the structure and function of modified filaments when expressed in an enteropathogenic E. coli espA mutant. We found that the chimeric protein EspA-FliCi filaments were biologically active as they supported protein secretion and translocation [assessed by their ability to trigger actin polymerisation beneath adherent bacteria (fluorescent actin staining test)]. The expressed filaments were recognised by both EspA and FliCi antisera. Visualisation and analysis of the chimeric filaments by electron microscopy after negative staining showed that, remarkably, EspA filaments are able to tolerate a large protein insertion without a significant effect on their helical architecture.     

Purification, characterization and antimicrobial spectrum of a bacteriocin produced by Pediococcus acidilactici

An antimicrobial peptide designated pediocin AcH was isolated from Pediococcus acidilactici strain H. The pediocin AcH was purified by ion exchange chromatography. The molecular weight of pediocin AcH was determined by SDS-PAGE to be about 2700 daltons. Pediocin AcH was sensitive to proteolytic enzymes, resistant to heat and organic solvents, and active over a wide range of pH. Pediocin AcH exhibited inhibition against several food spoilage bacteria and foodborne pathogens including Staphylococcus aureus, Clostridium perfringens and Listeria monocytogenes. It was bactericidal to sensitive cells and acted very rapidly. The bactericidal effect was not produced by either cell lysis or apparent loss of membrane permeability.     

Purification, characterization and antimicrobial spectrum of a bacteriocin produced by Pediococcus acidilactici

An antimicrobial peptide designated pediocin AcH was isolated from Pediococcus acidilactici strain H. The pediocin AcH was purified by ion exchange chromatography. The molecular weight of pediocin AcH was determined by SDS-PAGE to be about 2700 daltons. Pediocin AcH was sensitive to proteolytic enzymes resistant to heat and organic solvents, and active over a wide range of pH. Pediocin AcH exhibited inhibition against several food spoilage bacteria and foodborne pathogens including Staphylococcus aureus, Clostridium perfringens and Listeria monocytogenes. It was bactericidal to sensitive cells and acted very rapidly. The bactericidal effect was not produced by either cell lysis or apparent loss of membrane permeability.     

Mode of action of pediocin AcH from Pediococcus acidilactici H on sensitive bacterial strains

The peptide, pediocin AcH, from Pediococcus acidilactici H binds to the cell surface of Lactobacillus plantarum NCDO 955, its resistant mutant and several other sensitive and resistant Gram-positive bacteria but not to Gram-negative bacteria. Sensitive cells, following treatment with pediocin AcH, lost intracellular K ions, u.v.-absorbing materials, became more permeable to ONPG and, in some strains, lysed. Binding of pediocin AcH was maximum at pH 6.0. Anions of several salts inhibited binding of pediocin AcH but this was overcome by increased concentrations of pediocin AcH. Treatment of sensitive cells with 1% SDS, 4 mol/1 guanidine-HCl, several organic solvents and enzymes did not reduce subsequent binding of pediocin AcH. Partially purified cell wall from a sensitive strain was also able to bind pediocin AcH. However, treatment of the cell walls to remove lipoteichoic acid prevented binding. These molecules might, therefore, be one of the binding sites of pediocin AcH.