Kinetic optimization of a protein‐responsive aptamer beacon

Aptamers have been utilized as biosensors because they can be readily adapted to sensor platforms and signal transduction schemes through both rational design and selection. One highly generalizable scheme for the generation of the so‐called aptamer beacons involves denaturing the aptamer with antisense oligonucleotides. For example, rational design methods have been utilized to adapt anti‐thrombin aptamers to function as biosensors by hybridizing an antisense oligonucleotide containing a quencher to the aptamer containing a fluorescent label. In the presence of thrombin, the binding equilibrium is shifted, the antisense oligonucleotide dissociates, and the beacon lights up. By changing the affinity of the antisense oligonucleotide for the aptamer beacon, it has proven possible to change the extent of activation of the beacon. More importantly, modulating interactions between the antisense oligonucleotide and the aptamer strongly influences the kinetics of activation. Comparisons across multiple, designed aptamer beacons indicate that there is a strong inverse correlation between the thermodynamics of hybridization and the speed of activation, a finding that should prove to be generally useful in the design of future biosensors. By pre‐organizing the thrombin‐binding quadruplex within the aptamer the speed of response can be greatly increased. By integrating these various interactions, we were ultimately able to design aptamer beacons that were activated by threefold within 1 min of the addition of thrombin. Biotechnol. Bioeng. 2009;103: 1049–1059. © 2009 Wiley Periodicals, Inc.     

A novel electrochemical detection method for aptamer biosensors

A beacon aptamer-based biosensor for the detection of thrombin was developed using electrochemical transduction method. Gold surface was modified with a beacon aptamer covalently linked at 5'-terminus with a linker containing a primary aliphatic amine. Methylene blue (MB) was intercalated into the beacon sequence, and used as an electrochemical marker. When the beacon aptamer immobilized on gold surface encounters thrombin, the hairpin forming beacon aptamer is conformationally changed to release the intercalated MB, resulting a decrease in electrical current intensity in voltamogram. The peak signal of the MB is clearly decreased by the binding of thrombin onto the beacon aptamer. The linear range of the signal was observed between 0 and 50.8 nM of thrombin with 0.999 correlation factor. This method was able to linearly and selectively detect thrombin with a detection limit of 11 nM.     

Low background signal platform for the detection of ATP: when a molecular aptamer beacon meets graphene oxide

A novel molecular aptamer beacon (MAB) was designed by integrating a single-labeled hairpin-shaped aptamer and graphene oxide (GO). The hairpin-shaped aptamer was constructed with anti-ATP aptamer and another five nucleotides added to the 5'-end of the aptamer which are complementary to nucleotides at the 3'-end of the aptamer to form a hairpin-shaped probe. This newly designed MAB which acts as a low background signal platform was used for the ATP detection based on long-range resonance energy transfer (LrRET). In the absence of ATP, the adsorption of the dye-labeled hairpin-shaped aptamer on GO makes the dyes close proximity to GO surface resulting in high efficiency quenching of fluorescence of the dyes. Therefore, the fluorescence of the designed MAB is completely quenched by GO, and the system shows very low background. Conversely, and very importantly, upon the adding of ATP, the quenched fluorescence is recovered significantly, and ATP can be detected in a wide range of 5-2500μM with a detection limit of 2μM and good selectivity. Moreover, when the GO-based MAB was used in cellular ATP assays, preeminent fluorescence signals were obtained, thus the platform of GO-based MAB could be used to detect ATP in real-world samples.     

A quantum dot-aptamer beacon using a DNA intercalating dye as the FRET reporter: application to label-free thrombin detection

A new quantum dot (QD)-aptamer (apt) beacon that acts by folding-induced dissociation of a DNA intercalating dye, BOBO-3(B), is demonstrated with label-free thrombin detection. The beacon, denoted as QD-apt:B, is constructed by (1) coupling of a single-stranded thrombin aptamer to Qdot 565 via EDC/Sulfo-NHS chemistry and (2) staining the duplex regions of the aptamer on QD with excess BOBO-3 before thrombin binding. When mixing a thrombin sample with QD-apt:B, BOBO-3 is competed away from the beacon due to target-induced aptamer folding, which then causes a decrease in QD fluorescence resonance energy transfer (FRET)-mediated BOBO-3 emission and achieves thrombin quantitation. In this work, the effects of Mg(2+), coupling time, and aptamer type on the beacon's performances are investigated and discussed thoroughly with various methods, including transmission electron microscopy (TEM), dynamic light scattering (DLS), and two-color differential gel electrophoresis. Using the best aptamer beacon (HTQ37), we attain highly specific and wide-range detection (from nM to μM) of thrombin in buffer, and the beacon can sense nM-range thrombin in 15% diluted serum. Compared to the reported QD aptamer assays, our method is advantageous from the aspect of using a simple sensory unit design without losing the detection sensitivity. Therefore, we consider the QD-apt:B beacon a potential alternative to immuno-reagents and an effective tool to study nucleic acid folding on QD as well.     

Serum inverts and improves the fluorescence response of an aptamer beacon to various vitamin D analytes

A dominant aptamer loop structure from a library of nearly 100 candidate aptamer sequences developed against immobilized 25‐hydroxyvitamin D₃ (calcidiol) was converted into a 5′‐TYE 665 and 3′‐Iowa black‐labelled aptamer beacon. The aptamer beacon exhibited a mild 'lights on' reaction in buffer as a function of increasing concentrations of several vitamin D analogues and metabolites, with a limit of detection of approximately 200 ng/mL, and was not specific for any particular congener. In 10% or 50% human serum, the same aptamer beacon inverted its fluorescence behaviour to become a more intense 'lights off' reaction with an improved limit of detection in the range 4–16 ng/mL. We hypothesized that this drastic change in fluorescence behaviour was due to the presence of creatinine and urea in serum, which might destabilize the quenched beacon, causing an increase in fluorescence followed by decreasing fluorescence as a function of vitamin D concentrations that may bind and quench increasingly greater fractions of the denatured beacons. However, the results of several control experiments in the presence of physiological or greater concentrations of creatinine and urea, alone or combined in buffer, failed to produce the beacon fluorescence inversion. Other possible mechanistic hypotheses are also discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

In vitro selection of molecular beacons

While molecular beacons are primarily known as biosensors for the detection of nucleic acids, it has proven possible to adapt other nucleic acid binding species (aptamers) to function in a manner similar to molecular beacons, yielding fluorescent signals only in the presence of a cognate ligand. Unfortunately, engineering aptamer beacons requires a detailed knowledge of aptamer sequence and structure. In order to develop a general method for the direct selection of aptamer beacons we have first developed a selection method for molecular beacons. A pool of random sequence DNA molecules were immobilized via a capture oligonucleotide on an affinity column, and those variants that could be released from the column by a target oligonucleotide were amplified. After nine rounds of selection and amplification the elution characteristics of the population were greatly improved. A fluorescent reporter in the selected beacons was located adjacent to a DABCYL moiety in the capture oligonucleotide; addition of the target oligonucleotide led to release of the capture oligonucleotide and up to a 17-fold increase in fluorescence. Signaling was specific for the target oligonucleotide, and occurred via a novel mechanism, relative to designed molecular beacons. When the target oligonucleotide is bound it can form a stacked helical junction with an intramolecular hairpin in the selected beacon; formation of the intramolecular hairpin in turn leads to release of the capture oligonucleotide. The ability to select molecular beacons may prove useful for identifying available sites on complex targets, such as mRNAs, while the method for selection can be easily generalized to other, non-nucleic acid target classes.     

Effect of loop sequence and size on DNA aptamer stability

The thrombin aptamer is a 15-mer oligodeoxyribonucleotide that folds into a unimolecular quadruplex consisting of a stack of two guanine quartets connected by two external loops and one central loop and possesses a high affinity for thrombin. We have undertaken a systematic examination, in KCl, of the thermodynamic stability of thrombin aptamer analogues containing sequence modifications in one or more of the loops, as well as in the number of quartets. UV melting studies have been carried out to obtain the relevant thermodynamic parameters for these aptamers. van't Hoff analysis of these data, with a two-state model for unimolecular denaturation, gave excellent fits to the experimental observations. Thermodynamic analysis indicates that the central loop sequence in the parent aptamer is optimal for stability. Modifications in this or other loops can effect either DeltaH degrees, DeltaS degrees, or both. Addition of a single G at the 5'-end decreases stability while addition of a G at the 3'-end increases stability. Differential scanning calorimetry experiments on the thrombin aptamer reveal that a heat capacity change, not detected by UV measurements, accompanies the unfolding of the aptamer.     

Direct selection of RNA beacon aptamers

A method for the direct selection of RNA molecules that can be easily converted into beacon aptamers is presented. Beacon aptamers are fluorescently labeled nucleic acids that signal the presence of a specific ligand through changes in fluorescence intensity. Typically, ligand binding causes an increase in fluorescence intensity by inducing a conformational change that separates a fluorophore/quencher pair. The method presented here simultaneously selects for ligand binding and induction of an appropriate conformational change. The method was tested by selecting RNA molecules that can detect the aminoglycoside antibiotic tobramycin. After 14 rounds of selection, two sequence families emerged. Upon conversion into beacon aptamers, representatives of the two selected sequence families specifically detected tobramycin, while a negative control RNA that did not survive the selection protocol did not function as a tobramycin beacon aptamer.     

Stability and binding properties of a modified thrombin binding aptamer

Aptamer-based drugs represent an attractive approach in pharmacological therapy. The most studied aptamer, thrombin binding aptamer (TBA), folds into a well-defined quadruplex structure and binds to its target with good specificity and affinity. Modified aptamers with improved biophysical properties could constitute a new class of therapeutic aptamers. In this study we show that the modified thrombin binding aptamer (mTBA), ^3′GGT^5′-^5′TGGTGTGGTTGG^3′, which also folds into a quadruplex structure, is more stable than its unmodified counterpart and shows a higher thrombin affinity. The stability of the modified aptamer was investigated using differential scanning calorimetry, and the energetics of mTBA and TBA binding to thrombin was characterized by means of isothermal titration calorimetry (ITC). ITC data revealed that TBA/thrombin and mTBA/thrombin binding stoichiometry is 1:2 for both interactions. Structural models of the two complexes of thrombin with TBA and with mTBA were also obtained and subjected to molecular dynamics simulations in explicit water. Analysis of the models led to an improvement of the understanding of the aptamer-thrombin recognition at a molecular level.     

A host-guest-recognition-based electrochemical aptasensor for thrombin detection

A sensitive electrochemical aptasensor for thrombin detection is presented based on the host-guest recognition technique. In this sensing protocol, a 15 based thrombin aptamer (ab. TBA) was dually labeled with a thiol at its 3' end and a 4-((4-(dimethylamino)phenyl)azo) benzoic acid (dabcyl) at its 5' end, respectively, which was previously immobilized on one Au electrode surface by AuS bond and used as the thrombin probe during the protein sensing procedure. One special electrochemical marker was prepared by modifying CdS nanoparticle with β-cyclodextrins (ab. CdS-CDs), which employed as electrochemical signal provider and would conjunct with the thrombin probe modified electrode through the host-guest recognition of CDs to dabcyl. In the absence of thrombin, the probe adopted linear structure to conjunct with CdS-CDs. In present of thrombin, the TBA bond with thrombin and transformed into its special G-quarter structure, which forced CdS-CDs into the solution. Therefore, the target-TBA binding event can be sensitively transduced via detecting the electrochemical oxidation current signal of Cd of CdS nanoparticles in the solution. Using this method, as low as 4.6 pM thrombin had been detected.     

Monitoring helicase activity with molecular beacons

A high-throughput, fluorescence-based helicase assay using molecular beacons is described. The assay is tested using the NS3 helicase encoded by the hepatitis C virus (HCV) and is shown to accurately monitor helicase action on both DNA and RNA. In the assay, a ssDNA oligonucleotide molecular beacon, featuring a fluorescent moiety attached to one end and a quencher attached to the other, is annealed to a second longer DNA or RNA oligonucleotide. Upon strand separation by a helicase and ATP, the beacon strand forms an intramolecular hairpin that brings the tethered fluorescent and quencher molecules into juxtaposition, quenching fluorescence. Unlike currently available real-time helicase assays, the molecular beacon-based helicase assay is irreversible. As such, it does not require the addition of extra DNA strands to prevent products from re-annealing. Several variants of the new assay are described and experimentally verified using both Cy3 and Cy5 beacons, including one based on a sequence from the HCV genome. The HCV genome-based molecular beacon helicase assay is used to demonstrate how such an assay can be used in high-throughput screens and to analyze HCV helicase inhibitors.     

Determination of glucose and uric acid with bienzyme colorimetry on microfluidic paper-based analysis devices

An aptamer is an artificial functional oligonucleic acid, which can interact with its target molecule with high affinity and specificity. Enzyme linked aptamer assay (ELAA) is developed to detect cocaine using aptamer fragment/cocaine configuration based on the affinity interaction between aptamer fragments with cocaine. The aptasensor was constructed by cleaving anticocaine aptamer into two fragments: one was assembled on a gold electrode surface, while the other was modified with biotin at 3'-end, which could be further labelled with streptavidin-horseradish peroxidase (SA-HRP). Upon binding with cocaine, the HRP-labelled aptamer fragment/cocaine complex formed on the electrode would increase the reduction current of hydroquinone (HQ) in the presence of H(2)O(2). The sensitivity and the specificity of the proposed electrochemical aptasensor were investigated by differential pulse voltammetry (DPV). The results indicated that the DPV signal change could be used to sensitively detect cocaine with the dynamic range from 0.1 μM to 50 μM and the detection limit down to 20 nM (S/N=3). The proposed aptasensor has the advantages of high sensitivity and low background current. Furthermore, a new configuration for ELAA requiring only a single aptamer sequence is constructed, which can be generalized for detecting different kinds of targets by cleaving the aptamers into two suitable segments.     

Molecular aptamer beacons for real-time protein recognition

One of the most pressing problems facing those attempting to understand the regulation of gene expression and translation is the necessity to monitor protein production in a variety of metabolic states. Thus far, there is no easy solution that will either identify or quantitate proteins in real time. Here we introduce a novel protein probe, molecular aptamer beacon (MAB), for real time protein recognition and quantitative analysis. The MAB combines the signal transduction mechanism of molecular beacons and the molecular recognition specificity of aptamers. An MAB based on a thrombin-binding aptamer was prepared as a model to demonstrate the feasibility. Significant fluorescent signal change was observed when MAB was bound to thrombin, which is attributed to a significant conformational change in MAB from a loose random coil to a compact unimolecular quadruplex. The MAB recognizes its target protein with high specificity and high sensitivity (112 picomolar thrombin concentration) in homogeneous solutions. Ratiometric imaging has been conducted with MAB labeled with two fluorophores, which makes it feasible for protein quantitation in living specimen. The unique properties of the MAB will enable the development of a class of protein probes for real time protein tracing in living specimen and for efficient biomedical diagnosis in homogeneous solutions.     

The 1.3 A crystal structure of a biotin-binding pseudoknot and the basis for RNA molecular recognition

A pseudoknot-containing aptamer isolated from a pool of random sequence molecules has been shown previously to represent an optimal RNA solution to the problem of binding biotin. The affinity of this RNA molecule is nonetheless orders of magnitude weaker than that of its highly evolved protein analogs, avidin and streptavidin. To understand the structural basis for biotin binding and to compare directly strategies for ligand recognition available to proteins and RNA molecules, we have determined the 1.3 A crystal structure of the aptamer complexed with its ligand. Biotin is bound at the interface between the pseudoknot's stacked helices in a pocket defined almost entirely by base-paired nucleotides. In comparison to the protein avidin, the aptamer packs more tightly around the biotin headgroup and makes fewer contacts with its fatty acid tail. Whereas biotin is deeply buried within the hydrophobic core in the avidin complex, the aptamer relies on a combination of hydrated magnesium ions and immobilized water molecules to surround its ligand. In addition to demonstrating fundamentally different approaches to molecular recognition by proteins and RNA, the structure provides general insight into the mechanisms by which RNA function is mediated by divalent metals.     

Quadruplex formation as a molecular switch to turn on intrinsically fluorescent nucleotide analogs

Quadruplexes are involved in the regulation of gene expression and are part of telomeres at the ends of chromosomes. In addition, they are useful in therapeutic and biotechnological applications, including nucleic acid diagnostics. In the presence of K⁺ ions, two 15-mer sequences d(GGTTGGTGTGGTTGG) (thrombin binding aptamer) and d(GGGTGGGTGGGTGGG) (G3T) fold into antiparallel and parallel quadruplexes, respectively. In the present study, we measured the fluorescence intensity of one or more 2-aminopurine or 6-methylisoxanthopterin base analogs incorporated at loop-positions of quadruplex forming sequences to develop a detection method for DNA sequences in solution. Before quadruplex formation, the fluorescence is efficiently quenched in all cases. Remarkably, G3T quadruplex formation results in emission of fluorescence equal to that of a free base in all three positions. In the case of thrombin binding aptamer, the emission intensity depends on the location of the fluorescent nucleotides. Circular dichroism studies demonstrate that the modifications do not change the overall secondary structure, whereas thermal unfolding experiments revealed that fluorescent analogs significantly destabilize the quadruplexes. Overall, these studies suggest that quadruplexes containing fluorescent nucleotide analogs are useful tools in the development of novel DNA detection methodologies.     

Riboswitch Detection Using Profile Hidden Markov Models

Background  

Riboswitches are a type of noncoding RNA that regulate gene expression by switching from one structural conformation to another on ligand binding. The various classes of riboswitches discovered so far are differentiated by the ligand, which on binding induces a conformational switch. Every class of riboswitch is characterized by an aptamer domain, which provides the site for ligand binding, and an expression platform that undergoes conformational change on ligand binding. The sequence and structure of the aptamer domain is highly conserved in riboswitches belonging to the same class. We propose a method for fast and accurate identification of riboswitches using profile Hidden Markov Models (pHMM). Our method exploits the high degree of sequence conservation that characterizes the aptamer domain.     

Detection of Transgenes in Crop Plants Using Molecular Beacon Assays

Molecular beacons are oligonucleotide probes that form a stem-and-loop structure and possess an internally quenched fluorophore. When they bind to complementary targets, they undergo a conformational transition that turns on their fluorescence. These probes recognise their targets with higher specificity than linear probes and can easily discriminate targets that differ from one another by a single nucleotide. As a model system to test the applicability of molecular beacons in crop plants, we have designed a molecular beacon to detect the bar transgene in barley. Results from this experiment indicate that molecular beacons can be successfully employed in detecting transgenes, simultaneously combining the benefits of being highly reproducible and sensitive. The molecular beacon assay is suitable for diagnostics, simultaneously being employed in the development of rapid DNA-based assays for analysing single nucleotide polymorphisms (SNPs).