Grating-coupled surface plasmon resonance: a cell and protein microarray platform

Grating-coupled surface plasmon resonance (GCSPR) is a method for the accurate assessment of analyte in a multiplexed format using small amounts of sample. In GCSPR, the analyte is flowed across specific receptors (e.g. antibodies or other proteins) that have been immobilized on a sensor chip. The chip surface is illuminated with p-polarized light that couples to the gold surface's electrons to form a surface plasmon. At a specific angle of incidence, the GCSPR angle, the maximum amount of coupling occurs, thus reducing the intensity of reflected light. Shifts in the GCSPR angle can be correlated with refractive index increases following analyte capture by chip-bound receptors. Because regions of the chip can be independently analyzed, this system can assess 400 interactions between analyte and receptor on a single chip. We have used this label-free system to assess a number of molecules of immunological interest. GCSPR can simultaneously detect an array of cytokines and other proteins using the same chip. Moreover, GCSPR is also compatible with assessments of antigen expression by intact cells, detecting cellular apoptosis and identifying T cells and B cells. This technology represents a powerful new approach to the analysis of cells and molecular constituents of biological samples.     

Novel immunoassay for carcinoembryonic antigen based on protein A-conjugated immunosensor chip by surface plasmon resonance and cyclic voltammetry

In this study, an immunosensor chip utilizing surface plasmon resonance (SPR) and cyclic voltammetry (CV) was fabricated for detecting carcinoembryonic antigen (CEA). Specifically, we applied in parallel an SPR instrument and a CV device to monitor the assembly of carcinoembryonic antibody (anti-CEA) on a protein A-conjugated surface and the subsequent ligand reaction. The immunosensor chips were constructed by various concentrations of protein A. To determine the surface characteristics of different self-assembly monolayers (SAMs), several quantitative and kinetic measurements were carried out. The extent of immobilization of anti-CEA and the immune response of anti-CEA antibody against CEA were measured using the SPR instrument and CV device. The terminal functional groups of protein A have different effects on the adsorption and covalent binding of immunoprotein depending on the steric hindrance. Through the parallel measurements, we demonstrate that SPR and CV are sensitive to measure the antigen–antibody binding capacity.     

Sensitivity enhancement of spectral surface plasmon resonance biosensors for the analysis of protein arrays

A novel method for sensitivity enhancement of spectral surface plasmon resonance (SPR) biosensors was presented by reducing the refractive index of the sensing prism in the analysis of protein arrays. Sensitivity of spectral SPR biosensors with two different prisms (BK-7, fused silica) was analyzed by net shifts of resonance wavelength for specific interactions of GST–GTPase binding domain of p21-activated kinase-1 and anti-GST on a mixed thiol surface. Sensitivity was modulated by the refractive index of the sensing prism of the spectral SPR biosensors with the same incidence angle. The sensitivity of a spectral SPR biosensor with a fused silica prism was 1.6 times higher than that with a BK-7 prism at the same incidence angle of 46.2°. This result was interpreted by increment of the penetration depth correlated with evanescent field intensity at the metal/dielectric interface. Therefore, it is suggested that sensitivity enhancement is readily achieved by reducing the refractive index of the sensing prism of spectral SPR biosensors to be operated at long wavelength ranges for the analysis of protein arrays.     

A surface plasmon resonance study of the interactions between the component subunits of protein kinase CK2 and two protein substrates,casein and calmodulin

Surface plasmon resonance has been used to study the interaction between the subunits composing protein kinase CK2 (two catalytic, -subunits, and two regulatory, -subunits), as well as the interaction of each subunit with two types of protein substrates, casein, the phosphorylation of which is activated by the regulatory subunit, and calmodulin, which belongs to the kind of substrates on which the catalytic subunit is down regulated by the regulatory subunit. The interaction of casein with the catalytic subunit differs from the interaction with the holoenzyme. Similarly to the interaction with the regulatory subunit, the catalytic subunit interacts with the protein substrate forming a very stable, irreversible complex. The reconstituted holoenzyme, however, binds casein reversibly, displaying a binding mode similar to that displayed by the regulatory subunit. The interaction of calmodulin with the catalytic subunit gives place, like in the case of casein, to an irreversible complex. The interactions with the regulatory subunit, and with the holoenzyme were practically negligible, and the interaction with the regulatory subunit disappeared upon increasing the temperature value to close to 30°C. The presence of polylysine induced a high increase in the extent of calmodulin binding to the holoenzyme. The results obtained suggest that CK2 subunit and protein substrates share a common, or at least an overlapping site of interaction on the catalytic subunit. The interaction between both subunits would prevent substrates from binding irreversibly to subunit, and, at the same time, it would generate a new and milder site of interaction between the whole holoenzyme and the protein substrate. The main difference between casein and calmodulin would consist in the lower affinity display by the last for the new site generated upon the binding of the regulatory subunit, in the absence of polycations like polylysine.     

Differential binding studies applying functional protein microarrays and surface plasmon resonance

A variety of different in vivo and in vitro technologies provide comprehensive insights in protein-protein interaction networks. Here we demonstrate a novel approach to analyze, verify and quantify putative interactions between two members of the S100 protein family and 80 recombinant proteins derived from a proteome-wide protein expression library. Surface plasmon resonance (SPR) using Biacore technology and functional protein microarrays were used as two independent methods to study protein-protein interactions. With this combined approach we were able to detect nine calcium-dependent interactions between Arg-Gly-Ser-(RGS)-His6 tagged proteins derived from the library and GST-tagged S100B and S100A6, respectively. For the protein microarray affinity-purified proteins from the expression library were spotted onto modified glass slides and probed with the S100 proteins. SPR experiments were performed in the same setup and in a vice-versa approach reversing analytes and ligands to determine distinct association and dissociation patterns of each positive interaction. Besides already known interaction partners, several novel binders were found independently with both detection methods, albeit analogous immobilization strategies had to be applied in both assays.     

Surface plasmon resonance imaging-based protein arrays for high-throughput screening of protein-protein interaction inhibitors

The E7 protein produced by high-risk human papillomavirus (HPV) induces a degradation of the retinoblastoma tumor suppressor RB through direct interaction, which suggests that an inhibitor for the interaction can be a potential anticancer drug. A surface plasmon resonance (SPR) imaging-based protein array chip was developed for the high-throughput screening of inhibitor molecules targeting RB-E7 interaction. The glutathione S-transferase-fused E7 protein (GST-E7) was first layered onto a glutathionylated gold chip surface that had been designed to specifically bind to GST-fused proteins. Subsequently, a microarrayer was used to spot the hexa-histidine-tagged RB proteins (His(6)-RB) onto the GST-E7-layered gold chip surface, and the resulting SPR image was analyzed. Upon increased His(6)-RB concentration in the spotting solution, the SPR signal intensity increased proportionally, indicating that His(6)-RB bound to GST-E7 in a concentration-dependent manner. The His(6)-RB/GST-E7 interaction was challenged by spotting the His(6)-RB solution in the presence of a RB binding peptide (PepC) derived from a motif on E7. The SPR imaging data showed that PepC inhibited the His(6)-RB/GST-E7 interaction in a concentration-dependent manner. Our results show that the SPR imaging-based protein array chip can be applied to screen small molecule inhibitors that target protein-protein interaction.     

High-throughput affinity ranking of antibodies using surface plasmon resonance microarrays

A method was developed to rapidly identify high-affinity human antibodies from phage display library selection outputs. It combines high-throughput Fab fragment expression and purification with surface plasmon resonance (SPR) microarrays to determine kinetic constants (kon and koff) for 96 different Fab fragments in a single experiment. Fabs against human tissue kallikrein 1 (hK1, KLK1 gene product) were discovered by phage display, expressed in Escherichia coli in batches of 96, and purified using protein A PhyTip columns. Kinetic constants were obtained for 191 unique anti-hK1 Fabs using the Flexchip SPR microarray device. The highest affinity Fabs discovered had dissociation constants of less than 1 nM. The described SPR method was also used to categorize Fabs according to their ability to recognize an apparent active site epitope. The ability to rapidly determine the affinities of hundreds of antibodies significantly accelerates the discovery of high-affinity antibody leads.     

A surface plasmon resonance-based assay for small molecule inhibitors of human cyclophilin A

A simple protocol for generating a highly stable and active surface plasmon resonance (SPR) sensor surface of recombinant human hexahistidine cyclophilin A (His-CypA) is described. The sensor surface was sensitive and stable enough to allow, for the first time, the screening and ranking of several novel small-molecule (Mr approximately 250-500 Da) ligands in a competition binding assay with cyclosporin A (CsA). It also allowed us to accurately determine the kinetic rate constants for the interaction between His-CypA and CsA. His-CypA was first captured on a Ni2+-nitrilotriacetic acid (NTA) sensor chip and was then briefly covalently stabilized, coupling via primary amines. The significant baseline drift observed due to dissociation of weakly bound His-CypA from the Ni2+-NTA moiety was eliminated, resulting in a surface that was stable for at least 36 h. In addition, immobilized protein activity levels were high, typically between 85 and 95%, assayed by the interaction between His-CypA and CsA. The mean equilibrium dissociation constant for CsA (K(dCsA)) binding to the immobilized His-CypA was 23+/-6 nM, with on and off rates of 0.53+/-0.1 microM(-1) s(-1) and 1.2+/-0.1 (x 10(-2)) s(-1), respectively. These values agree well with the values for the corresponding binding constants determined from steady-state and kinetic fluorescence titrations in solution.     

Direct analysis of a GPCR-agonist interaction by surface plasmon resonance

Despite their clinical importance, detailed analysis of ligand binding at G-protein coupled receptors (GPCRs) has proved difficult. Here we successfully measure the binding of a GPCR, neurotensin receptor-1 (NTS-1), to its ligand, neurotensin (NT), using surface plasmon resonance (SPR). Specific responses were observed between NT and purified, detergent-solublised, recombinant NTS-1, using a novel configuration where the biotinylated NT ligand was immobilised on the biosensor surface. This SPR approach shows promise as a generic approach for the study of ligand interactions with other suitable GPCRs.     

NTA-mediated protein capturing strategy in screening experiments for small organic molecules by surface plasmon resonance

Nitrilotriacetate (NTA)-mediated capture of a histidine-tagged protein is widely used as an easy and simple method to reversibly immobilize the protein onto a sensor chip for surface plasmon resonance (SPR). However, in spite of its advantages, the NTA-capturing strategy is rarely employed for ligand screening experiments using SPR, because it was thought to cause substantial errors in binding responses, due to the inevitable protein dissociation during the monitoring period. In this study, as demonstrated in a ligand screening for the histidine-tagged SH3 domain of the human phosphatidylinositol 3-kinase p85alpha subunit, false responses after adhesion of undesirable compounds to a target protein could be minimized with the NTA strategy, while binding responses of a positive control peptide still stayed within a 1%-deviation against the theoretical binding capacity.     

In vitro farnesoid X receptor ligand sensor assay using surface plasmon resonance and based on ligand-induced coactivator association

Ligand binding to nuclear receptors leads to a conformational change that increases the affinity of the receptors to coactivator proteins. We have developed a ligand sensor assay for farnesoid X receptor (FXR) in which the receptor–coactivator interaction can be directly monitored using surface plasmon resonance biosensor technology. A 25-mer peptide from coactivator SRC1 containing the LXXLL nuclear receptor interaction motif was immobilized on the surface of a BIAcore sensor chip. Injection of the FXR ligand binding domain (FXRLBD) with or without the most potent natural ligand, chenodeoxycholic acid (CDCA), over the surface of the chip resulted in a ligand- and LXXLL motif-dependent interaction. Kinetic analysis revealed that CDCA and its conjugates decreased the equilibrium dissociation constant (K_d) by 8–11-fold, indicating an increased affinity. Using this technique, we found that a synthetic bile acid sulfonate, 3,7-dihydroxy-5β-cholane-24-sulfonate, which was inactive in a FXR response element-driven luciferase assay using CV-1 cells, caused the most potent interaction, comparable to the reaction produced by CDCA. This method provides a rapid and reliable in vitro ligand assay for FXR. This kinetic analysis-featured technique may be applicable to mechanistic studies.     

Analysis of the aplyronine A-induced protein–protein interaction between actin and tubulin by surface plasmon resonance

The antitumor macrolide aplyronine A induces protein–protein interaction (PPI) between actin and tubulin to exert highly potent biological activities. The interactions and binding kinetics of these molecules were analyzed by the surface plasmon resonance with biotinylated aplyronines or tubulin as ligands. Strong binding was observed for tubulin and actin with immobilized aplyronine A. These PPIs were almost completely inhibited by one equivalent of either aplyronine A or C, or mycalolide B. In contrast, a non-competitive actin-depolymerizing agent, latrunculin A, highly accelerated their association. Significant binding was also observed for immobilized tubulin with an actin–aplyronine A complex, and the dissociation constant K_D was 1.84 μM. Our method could be used for the quantitative analysis of the PPIs between two polymerizing proteins stabilized with small agents.     

Using surface plasmon resonance to directly measure slow binding of low-molecular mass inhibitors to a VanX chip

VanX, a d,d-dipeptidase, is one of five gene products responsible for vancomycin resistance in pathogenic bacteria and is an attractive drug target in circumventing clinical drug resistance. Our previous combinatorial search of VanX substrates in a dipeptide library of d-X(1)-d-X(2) (19(2)=361) forms has led to the discovery of three new compounds (d-Ala-d-Phe, d-Ala-d-Tyr, and d-Ala-d-Trp) having higher k(cat)/K(M) values than those of its natural substrate, d-Ala-d-Ala. Based on structures of newly identified substrates, two representative transition state analogs of substrates, d-Ala(P,O)d-Phe (6a) and d-Ala(P,O)d-Ala (6b) dipeptide phosphonates, used as VanX inhibitor were rationally designed and chemically synthesized. In the synthesis, eight synthetic steps in total were employed for preparing each VanX inhibitor, and their overall isolated yields were 21 and 11% for 6a and 6b, respectively. Binding interactions of d-Ala(P,O)d-Phe (6a) and d-Ala(P,O)d-Ala (6b) with VanX were confirmed unambiguously and measured quantitatively by surface plasmon resonance. The result reveals that both dipeptide phosphonates are slow-binding inhibitors of VanX (for 6a, k(on)=1.18 x 10(3)M(-1)s(-1), k(off)=2.31 x 10(-3) s(-1), K(D)=1.96 microM, chi(2)=0.0737; for 6b, k(on)=1.09 x 10(3)M(-1)s(-1), k(off)=1.80 x 10(-2)s(-1), K(D)=16.5 microM, chi(2)=0.0599). This suggests that only a fraction of the conformers of the inhibitors in solution adopts a conformation best suited for binding interaction with VanX and that the VanX-inhibitor complex may concomitantly undergo a conformational isomerization from an initial but fast weak-binding adduct to slowly convert to a tight-binding complex with a more stable bound geometry. Moreover, in comparison with 6b, an additional aromatic interaction of 6a with the Phe79 residue in the active site of the enzyme, through an energetically favorable face-to-face offset stacked orientation, may account for its higher affinity than 6b to VanX.     

Nanoscale fabrication of protein A on self-assembled monolayer and its application to surface plasmon resonance immunosensor

The fabrication of protein A film on self-assembled monolayer was done for the construction of immunosensor using surface plasmon resonance (SPR) measurement. The layer of heterobifunctional linker, N-succinimidyl-3-(2-pyridyldithio)propionate (SPDP) was self-assembled on the gold (Au) surface. Due to the succinimidyl functional group in SPDP to be reacted with amine (NH₂) group of protein A, the covalent immobilization of protein A was subsequently induced toward Au surface. The characteristics of film formation were investigated using SPR with respect to the various concentrations of SPDP and protein A. The optimal concentration for the film formation was found to be 0.1 mg/mL of SPDP and 0.1 mg/mL of protein A, respectively. The surface topography of protein A layer using atomic force microscopy showed that the heteromolecular layer was formed successfully. The antibody, anti-bovine serum albumin (BSA), was immobilized onto protein A layer, and the fabricated antibody layer was applied for the detection of BSA. The extent of BSA–antibody binding was measured using SPR and its lower detection limit of BSA was 100 pM.     

Development of surface plasmon resonance biosensor assays for primary and secondary screening of acetylcholine binding protein ligands

Surface plasmon resonance (SPR) biosensors recently gained an important place in drug discovery. Here we present a primary and secondary SPR biosensor screening methodology. The primary screening method is based on a direct binding assay with covalent immobilized drug target proteins. For the secondary screening method, a sequential competition assay has been developed where the captured protein is first exposed to an unknown test compound, followed directly by an exposure to a high-molecular-weight reporter ligand. Using the high-molecular-weight reporter ligand to probe the remaining free binding site on the sensor, a significant signal enhancement is obtained. Furthermore, this assay format allows the validation of the primary direct binding assay format, efficiently revealing false positive data. As a model system, acetylcholine binding protein (AChBP), which is a soluble model protein for neuronal nicotinic acetylcholine receptors, has been used. The secondary assay is lower in throughput than the primary assay; however, the signal-to-noise ratio is two times higher compared with the direct assay, and it has a z′ factor of 0.96. Using both assays, we identified the compound tacrine as a ligand for AChBP.     

A method for microbial cell surface fingerprinting based on surface plasmon resonance

A method for microbial cell surface fingerprinting using surface plasmon resonance (SPR) is suggested. Four different Escherichia coli mutants have been used as model cells. Cell surface fingerprints were generated by registration of the interaction between the cell mutants and four different surfaces, with different physical and chemical properties, when a cell suspension was flown over the surface. Significant differences in fingerprint pattern between some of the mutants were observed. At the same time, the physical properties of the cell surfaces were determined using microelectrophoresis, contact angle measurements and aqueous two-phase partitioning and compared to the SPR fingerprints. The generated cell surface fingerprints and the physical property data were evaluated with multivariate data analysis that showed that the cells were separated into individual groups in a similar way using principal component analysis plots (PCA).     

Immunosensor for the detection of Vibrio cholerae O1 using surface plasmon resonance

An immunosensor for the detection of Vibrio cholerae O1 was developed on the basis of surface plasmon resonance (SPR). A protein G layer was fabricated by means of the chemical coupling between the free amine (-NH₂) groups of protein G and the activated carboxyl groups present on a self-assembled monolayer (SAM) consisting of a mixture of 11-mercaptoundecanoic acid (MUA) and hexanethiol (molar ratio of 1:2). A monoclonal antibody, which was confirmed to be specific to V. cholera O1 by the Western blotting technique, was immobilized on the protein G layer. The formation of the SAM, the protein G layer and the sequential binding of the antibody against V. cholera O1 were investigated with SPR spectroscopy. As the number of fabricated layers increased, the minimum angle of plasmon resonance was increased accordingly. The target bacteria, V. cholera O1, was measured with the fabricated immunosensor, whose detection range was between 10⁵ and 10⁹ cells/mL.     

Determination of refractive index increment ratios for protein-nucleic acid complexes by surface plasmon resonance

Three nucleic acid-protein complexes of 1:1 stoichiometry were analyzed by surface plasmon resonance on a Biacore biosensor to test whether or not proteins and nucleic acids yielded similar refractive index increments on binding. The expected maximum response in resonance units, (RU(exp))(max), and the observed one, (RU(obs))(max), on saturation of immobilized targets by interacting partners were compared to determine the ratio of (deltan/deltaC)(protein) to (deltan/deltaC)(nucleic acid), where n is the refractive index at the surface and C is the concentration of one partner. Our results suggest that proteins and nucleic acids behave similarly and that the discrepancy between the expected and observed maximum responses for such complexes reflects inaccurate evaluation of the binding responses. Therefore, no correction of the instrument response is required for protein and nucleic acid interaction studies on a Biacore biosensor.     

A fusion protein expression analysis using surface plasmon resonance imaging

A surface plasmon resonance (SPR) imaging system was constructed and used to detect the affinity-tagged recombinant proteins expressed in Escherichia coli. With regards to model proteins, the hexahistidine-ubiquitin-tagged human growth hormone (His(6)-Ub-hGH), glutathione S-transferase-tagged human interleukin-6 (GST-hIL6), and maltose-binding protein-tagged human interleukin-6 (MBP-hIL6) expressed in E. coli were analyzed. The cell lysates were spotted on gold thin films coated with 11-mercaptoundecanol (MUOH)/dextran derivatized with Ni(II)-iminodiacetic acid (IDA-Ni(II)), glutathione, or cyclodextrin. After a brief washing of the gold chip, SPR imaging measurements were carried out in order to detect the bound affinity-tagged fusion proteins. Using this new approach, rapid high-throughput expression analysis of the affinity-tagged proteins were obtained. The SPR imaging protein chip system used to measure the expression of affinity-tagged proteins in a high-throughput manner is expected to be an attractive alternative to traditional laborious and time-consuming methods, such as SDS-polyacrylamide gel electrophoresis (SDS-PAGE) and Western blots.     

Phase-polarisation contrast for surface plasmon resonance biosensors

A technique of phase-polarisation contrast (PPC) for the enhancement of the contrast of a surface plasmon resonance (SPR) intensity profile is proposed and experimentally realised. The technique exploits the peculiarities of light phase and polarisation behaviour under SPR. It applies to non-optimum SPR coupling conditions and enables one to lower the resonant minimum of reflected intensity nearly to zero, and hence to increase substantially the ratio of the intensity from the resonance to that at the minimum. We observed the contrast enhancement by more than one order of magnitude when we applied the PPC scheme. The PPC can be efficiently employed in commercial SPR sensors, as it significantly reduces restrictions on allowable parameters of SPR-supporting metal films and biomolecular layers immobilised on them, facilitates SPR observation, and increases the accuracy of SPR shift measurements.