Simultaneous production of anthocyanin and triterpenoids in suspension cultures of Perilla frutescens

When cultivated in Murashige & Skoog medium supplemented with 0.2 mg l⁻¹ 2,4-dichlorophenoxy acetic acid and 0.5 mg l⁻¹ 6-benzyladenine, Perilla frutescens cells in suspension culture grew rapidly reaching about 13.6 g dry wt l⁻¹ after 12 days. The cell line produced both anthocyanin 0.9 g l⁻¹ and triterpenoids: 16 mg l⁻¹ oleanolic acid (OA), 25 mg l⁻¹ ursolic acid (UA) and 14 mg l⁻¹ tormentic acid (TA). When P. frutescens cells of 7-day-old cultures were exposed to a yeast elicitor at 0.5–5% (v/v) for 7 days, it was found that anthocyanin content peaked at 10.2% of dry weight with yeast elicitor at 1% (v/v) whereas the maximum production of oleanolic acid and ursolic acid in cultures treated with 2% (v/v) yeast elicitor was 19 and 27 mg l⁻¹, a 46 and 24% increase over the control, respectively. This is the first report of simultaneous production of both anthocyanin and triterpenoids in a single culture system.     

Optimization of bio-indigo production by recombinant E. coli harboring fmo gene

A bacterial flavin-containing monooxygenase (FMO) gene was cloned from Methylophaga aminisulfidivorans MP^T, and a plasmid pBlue 2.0 was constructed to express the bacterial fmo gene in E. coli. To increase the production of bio-indigo, upstream sequence size of fmo gene was optimized and response surface methodology was used. The pBlue 1.7 plasmid (1686 bp) was prepared by the deletion of upstream sequence of pBlue 2.0. The recombinant E. coli harboring the pBlue 1.7 plasmid produced 662 mg l⁻¹ of bio-indigo in tryptophan medium after 24 h of cultivation in flask. The production of bio-indigo was optimized using a response surface methodology with a 2ⁿ central composite design. The optimal combination of media constituents for the maximum production of bio-indigo was determined as tryptophan 2.4 g l⁻¹, yeast extract 4.5 g l⁻¹ and sodium chloride 11.4 g l⁻¹. In addition, the optimum culture temperature and pH were 30 °C and pH 7.0, respectively. Under the optimized conditions mentioned above, the recombinant E. coli harboring pBlue 1.7 plasmid produced 920 mg of bio-indigo per liter in optimum tryptophan medium after 24 h of cultivation in fermentor. The combination of truncated insert sizes and culture optimization resulted in a 575% increase in the production of bio-indigo.     

Cadmium biosorption on Spirulina platensis biomass

Dry biomass of Spirulina platensis re-hydrated for 48 h was employed as a biosorbent in tests of cadmium(II) removal from water. Various concentrations of biomass (from 1 to 4 g l⁻¹) and metal (from 100 to 800 mg l⁻¹) were tested. Low biomass levels (X_o  2 g l⁻¹) ensured metal removal up to 98% only at Cd₀= 100 and 200 mg l⁻¹, while X_o  2.0 g l⁻¹ were needed at Cd₀ = 400 mg l⁻¹ to achieve satisfactory results. Whereas X_o = 4.0 g l⁻¹ was effective to remove up to Cd₀ = 500 mg l⁻¹, a further increase in metal concentration (Cd₀ = 600 and 800 mg l⁻¹) led to progressive worsening of the system performance. At a given biomass levels, the kinetics of the process was better at low Cd²⁺ concentrations, while, raising the adsorbent level from 1.0 to 2.0 g l⁻¹ and then to 4.0 g l⁻¹, the rate constant of biosorption increased by about one order of magnitude in both cases and the adsorption capacity of the system progressively decreased from 357 to 149 mg g⁻¹.     

Batch and continuous fermentation of succinic acid from wood hydrolysate by Mannheimia succiniciproducens MBEL55E

Batch and continuous cultures of Mannheimia succiniciproducens MBEL55E were carried out in a complex medium containing a NaOH-treated wood hydrolysate for the production of succinic acid. The wood hydrolysate based medium was treated with NaOH before sterilization to reduce the formation of inhibitory compounds. M. succiniciproducens MBEL55E utilized xylose as well as glucose in the wood hydrolysate based medium as a carbon source for the succinic acid production. In batch cultures, the final succinic acid concentration of 11.73 g l⁻¹ was obtained from the pre-treated wood hydrolysate based medium, resulting in a succinic acid yield of 56% and a succinic acid productivity of 1.17 g l⁻¹ h⁻¹, while the corresponding continuous cultures gave the succinic acid yield and productivity of 55% and 3.19 g l⁻¹ h⁻¹, respectively. These results suggest that succinic acid can be produced economically and efficiently by the fermentation of M. succiniciproducens MBEL55E from an inexpensive biomass-based wood hydrolysate.     

Phenol inhibition of biological nutrient removal in a four-step sequencing batch reactor

Nutrient removal from synthetic wastewater was investigated using a four-step sequencing batch reactor (SBR) at different phenol (C₆H₅OH) concentrations in order to determine the inhibition effects of phenol on biological nutrient removal. The nutrient removal process consisted of anaerobic, oxic, anoxic, and oxic phases with hydraulic residence times (HRT) of 1 h/3 h/1 h/1 h and a settling phase of 3/4 h. Solids retention time (SRT) was kept constant at 10 days in all experiments. Initial phenol concentrations were varied between 0 and 600 mg l⁻¹ at seven different levels. The effects of phenol on COD, NH₄-N, and PO₄-P removals and effluent nutrient levels were investigated. Phenol was almost completely degraded up to 400 mg l⁻¹ phenol concentration resulting in almost negligible inhibition effects on COD, NH₄-N, and PO₄-P removals. Nutrient removals were adversely affected by phenol at concentrations above 400 mg l⁻¹. Above 95% COD, 90% NH₄-N and 65% PO₄-P removal was obtained for phenol concentrations below 400 mg l⁻¹. The sludge volume index (SVI) was almost constant around 45 ml g⁻¹ for phenol concentrations below 400 mg l⁻¹ but increased to 90 ml g⁻¹ at a phenol level of 600 mg l⁻¹.     

Aerobic chromate reduction by chromium-resistant bacteria isolated from serpentine soil

A group of 34 chromium-resistant bacteria were isolated from naturally occurring chromium percolated serpentine soil of Andaman (India). These isolates displayed different degrees of chromate reduction under aerobic conditions. One of the 34 isolates identified as Bacillus sphaericus was tolerant to 800 mg l⁻¹ Cr(VI) and reduced >80% Cr(VI) during growth. In Vogel Bonner broth, B. sphaericus cells (10¹⁰ cells ml⁻¹) reduced 62% of 20 mg l⁻¹ of Cr(VI) in 48 h with concomitant discoloring of yellow medium to white one. Reduction of chromate was pronounced by the addition of glucose and yeast extract as electron donors. In the presence of 4.0 g l⁻¹ of glucose, 20 mg l⁻¹ of Cr(VI) was reduced to 2.45 mg l⁻¹ after 96 h of incubation. Optimum pH and temperature for reduction were 6.0 and 25 °C, respectively. Increase in cell density and initial Cr(VI) concentration increased chromate reduction but was inhibited by metal ions like, Ni²⁺, Co²⁺, Cd²⁺ and Pb²⁺. Experiments with cell-free extracts indicated that the soluble fraction of the cell was responsible for aerobic reduction of Cr(VI) by this organism.     

Rapid production of thermostable cellulase-free xylanase by a strain of Bacillus subtilis and its properties

A Bacillus subtilis strain isolated from a hot-spring was shown to produce xylanolytic enzymes. Their associative/synergistic effect was studied using a culture medium with oat spelts xylan as xylanase inducer. Optimal xylanase production of about 12 U ml⁻¹ was achieved at pH 6.0 and 50°C, within 18 h fermentation. At 50°C, xylanase productivity obtained after 11 h in shake-flasks, 96,000 U l⁻¹ h⁻¹, and in reactor, 104,000 U l⁻¹ h⁻¹ was similar. Increasing temperature to 55°C a higher productivity was obtained in the batch reactor 45,000 U l⁻¹ h⁻¹, compared to shake-flask fermentations, 12,000 U l⁻¹ h⁻¹. Optimal xylanolytic activity was reached at 60°C on phosphate buffer, at pH 6.0. The xylanase is thermostable, presenting full stability at 60°C during 3 h. Further increase in the temperature caused a correspondent decrease in the residual activity. At 90°C, 20% relative activity remains after 14 min. Under optimised fermentation conditions, no cellulolytic activity was detected on the extract. Protein disulphide reducing agents, such as DTT, enhanced xylanolytic activity about 2.5-fold. When is used xylan as substrate, xylanase production decreased as function of time in contrast, with trehalose as carbon source, xylanase production in maintained constant for at least 80 h fermentation.     

Effects of feed sugar concentration on continuous ethanol fermentation of cheese whey powder solution (CWP)

Cheese whey powder (CWP) solution with different CWP or sugar concentrations was fermented to ethanol in a continuous fermenter using pure culture of Kluyveromyces marxianus (DSMZ 7239). Sugar concentration of the feed CWP solution varied between 55 and 200 g l⁻¹ while the hydraulic residence time (HRT) was kept constant at 54 h. Ethanol formation, sugar utilization and biomass formation were investigated as functions of the feed sugar concentration. Percent sugar utilization and biomass concentrations decreased and the effluent sugar concentration increased with increasing feed sugar concentrations especially for the feed sugar contents above 100 g l⁻¹. Ethanol concentration and productivity (DP) increased with increasing feed sugar up to 100 g l⁻¹ and then decreased with further increases in the feed sugar content. The highest ethanol concentration (3.7%, v v⁻¹) and productivity (0.54 gE l⁻¹ h⁻¹) were obtained with the feed sugar content of 100 g l⁻¹ or 125 g l⁻¹. The ethanol yield coefficient (Y_P/S) was also maximum (0.49 gE gS⁻¹) when the feed sugar was between 100 and 125 g l⁻¹. The growth yield coefficient (Y_X/S) decreased steadily from 0.123 to 0.063 gX gS⁻¹ when the feed sugar increased from 55 to 200 g l⁻¹ due to adverse effects of high sugar contents on yeast growth. The optimal feed sugar concentration maximizing the ethanol productivity and sugar utilization was between 100 and 125 g l⁻¹ under the specified experimental conditions.     

High cell density culture of the diatom Nitzschia laevis for eicosapentaenoic acid production: fed-batch development

A fed-batch process was developed for high cell density culture of the diatom Nitzschia laevis for enhanced production of eicosapentaenoic acid (EPA). Firstly, among the various medium components, glucose (Glu) was identified as the limiting substrate while nitrate (NO₃⁻), tryptone (Tr) and yeast extract (Ye) were found to promote cell growth by enhancing specific growth rate. Therefore, these components were considered essential and were included in the feed medium for subsequent fed-batch cultivation. With the optimized ratio of NO₃⁻:Tr:Ye being 1:2.6:1.3 (by weight), the relative proportions of glucose to the nitrogen sources in the feed were investigated. The optimal ratios of Glu:NO₃⁻ for specific growth rate and EPA productivity were both determined to be 32:1 (by weight). Finally, based on the residual glucose concentration in the culture, a continuous medium feeding strategy for fed-batch fermenter cultivation was developed, with which, the maximal cell dry weight and EPA yield obtained were 22.1 g l⁻¹ and 695 mg l⁻¹, respectively, which were great improvements over those of batch cultures.     

Purification and immobilization of recombinant variants of Brevundimonas diminuta glutaryl-7-aminocephalosporanic acid acylase expressed in Escherichia coli cells

Cyclotides are naturally occurring mini-proteins that have a diverse range of therapeutically useful biological activities. Although a choice of approaches is available for cyclotides synthesis; most studies have involved the use of peptides extracted from plants. In order to facilitate the screening for structure-activity studies or to exploit them in drug development, a convenient and reliable route for the biosynthesis of cyclotides is of vital importance.

Callus, suspension cultures and hydroponic plants of Oldenlandia affinis were established and have been evaluated for effective cyclotides production processes. The specific accumulation of kalata B1 was affected by cell differentiation as well as agitation; highest accumulation of 2.7 mg g⁻¹ dry weight was detected in agitated hydroponic plant cultures resulting in a productivity of 1.4 mg kalata B1 l⁻¹ day⁻¹.     

A coupled two-stage continuous fermentation for solvent production by Clostridium acetobutylicum

The effects of nitrogen and phosphate in batch and continuous AEB fermentations were tested. Both nitrogen- and phosphate-limited fermentations favored acid formation but not solvent production. A coupled two-stage continuous fermentation was performed for 30 days with a nitrogen-limited first stage fermentation for enhanced acid production. The bacteria from the acidogenic phase (first stage) fermentation were continuously pumped into a 14-l second stage fermentor with supplemental glucose and nitrogen for solvent production. The second stage fermentor had a maximum butanol productivity of 0.4 g l⁻¹ h⁻¹ (total solvent production was 0.6 g l⁻¹ h⁻¹) at a dilution rate of 0.06 h⁻¹.     

Semicontinuous production of lactic acid in a bioreactor coupled with nanofiltration membranes

The advantages of nanofiltration membranes coupled with a CSTR were demonstrated for the semicontinuous production of lactic acid from whey permeate. Lactic acid was removed from the growth medium while lactose was kept in the bioreactor with the bacterial cells; moreover, Mg²⁺ ions were also recycled in the bioreactor at 96% and the nanofiltrate color was greatly reduced. The highest volumetric productivity achieved with this device was 7.1 g l⁻¹ h⁻¹ and the lactate concentration was 55 g l⁻¹. The specific productivity was 3.54 h⁻¹. More than 99% of the membrane fouling after 44 h of fermentation was reversible. The initial permeate flux was restored easily by a water rinse. The performance of this type of membrane bioreactor was discussed.     

Decolorization of reactive dyes by mixed cultures isolated from textile effluent under anaerobic conditions

In the present study mixed cultures that could grew in the molasses media were isolated from textile dye effluent and its decolorization activity was studied in a batch system under anaerobic conditions, in order to determine the optimal conditions required for the highest decolorization activity. The optimum pH value for decolorization was determined as 8 for all the dyes tested. In the experiment with pH 8 dye decolorizations by mixed cultures were investigated at about 96.2–1031.3 mg l⁻¹ initial dye concentrations. The highest dye removal rates of mixed cultures were 94.9% for Reactive Red RB, 91.0% for Reactive Black B and 63.6% for Remazol Blue at 953.2, 864.9 and 1031.3 mg l⁻¹ initial dye concentrations respectively within 24 h incubation period. When the Reactive Red RB was used, approximately 82–98% total color removal was obtained at between 96.2 and 953.2 mg l⁻¹ initial dye concentrations after 12 h of incubation at 35 °C. These results show that our enriched mixed cultures have the potential to serve as an excellent biomass for the use in reactive dye removal from wastewaters under anaerobic conditions.     

Mycelial pellet formation by Penicillium ochrochloron species due to exposure to pyrene

Five indigenous fungal strains with characteristics of the genus Penicillium capable of degrading and utilizing pyrene, as sole carbon source were isolated from soil of a former gas work site. Two strains were identified as Penicillium ochrochloron. One of the strains was able to degrade a maximum of 75% of 50 mg l⁻¹ pyrene at 22 °C during 28 days of incubation. The presence of pyrene in the medium resulted in an aggregation of hyphae into pellets by the two Penicillium ochrochloron strains. Formation of pellets was observed after 48 h of incubation with difference in size and texture between the two strains. This indicated the individual variation within the same genus of fungi. However, remaining strains did not show this behavior even though they were capable of utilizing pyrene as sole carbon source. The macro- and microscopic morphology of fungal pellets was studied using scanning electron microscopy. It was found that the addition of varying concentration of pyrene ranging from 10 to 50 mg l⁻¹ in the medium influenced shape and structure of the mycelial pellets. A two-fold increase in hyphal branching (with concomitant decrease in the average hyphal growth unit) was observed at a concentration of 10 mg l⁻¹. The relevance of fungal growth and morphology for bioremediation of polycyclic aromatic hydrocarbons (PAHs) contaminated sites are discussed.     

Effect of oxygen supply on cell growth and saponin production in bioreactor cultures of Panax ginseng

The effects of oxygen supply within the range 20.8–50% (using pure oxygen and air), on cell cultures of Panax ginseng were investigated in a balloon-type bubble bioreactor (5 L capacity, containing 4 L Murashige and Skoog medium, supplemented with 7.0 mg L⁻¹ indolebutyric acid, 0.5 mg L⁻¹ kinetin and 30 g L⁻¹ sucrose). A 40% oxygen supply was found to be optimal for the production of both cell mass and saponin yielding values of 12.8 g (DW) L⁻¹, 4.5 mg (g DW)⁻¹ on day 25, respectively. Low (20.8%, 30%) and high (50%) oxygen concentration supplies were unfavorable to cell growth and saponin accumulation. The results indicate that oxygen supplementation to bioreactor-based ginseng cultures was beneficial for biomass accumulation and saponin production.     

Optimization of submerged culture conditions for mycelial polysaccharide production in Cordyceps pruinosa

Cordyceps pruinosa is an entomogenous fungus noteworthy for its various bioactivities. The influence of synthetic medium and cultural conditions on polysaccharides production was investigated in shake flask culture. In the present study, optimal medium and submerged culture conditions were investigated using an orthogonal layout. Media and cultural conditions including potato starch 2% (w/v), sucrose 2.5%, soybean 0.5%, beef extract 0.5%, yeast extract 0.1%, KCl 0.02%, K₂HPO₄ 0.1%, MgSO₄·7H₂O 0.05%, pH 7.0, inoculum size 5%, medium capacity 50 ml/250 ml flask, dispersant 15 beads, culture time 7 days were employed. In fermentation medium, sucrose, beef extract and yeast extract were replaced with molasses of sucrose, groundnut and Vitamin B complex, respectively. Under optimal culture conditions, the yield of polysaccharides production was 9.51 g l⁻¹ after 54 h of fermentation in a 25 l fermenter, which was approximately twice as high as that in shake flask cultures. In addition the entire period of fermentation was shorted to around 1/4 of flask culture time (9 days). Thus, it will meet closely the requirements of industrial fermentation scale of polysaccharides production in C. pruinosa.     

Oxygen limitation improves glycerol production by Candida krusei in a bioreactor

An oxygen limitation strategy based on dynamic enzyme activity was applied to improve glycerol accumulation and decrease the residual sugar level in a fermentation of Candida krusei in a bioreactor. By applying oxygen limitation at 88 h when the activities of two glycerol synthetic enzymes cytosolic glycerol-3-phosphate dehydrogenase (ctGPD) and glycerol-3-phosphatase (GPP) were low and the activity of mitochondrial glycerol-3-phosphate dehydrogenase (mtGPD) which catalyzes the glycerol dissimilation was high, the glycerol dissimilation was efficiently reduced. The final glycerol concentration reached 51.8 g l⁻¹ at 96 h and 54.9 g l⁻¹ at 116 h, which was 18 and 60% higher than the control (without oxygen limitation), respectively. The residual sugar was consumed completely while it was 11.2 g l⁻¹ at the end of fermentation in the control. Under oxygen limitation, ethanol production was detected at a final concentration of 3.6 g l⁻¹. This work suggests a metabolic flux shift by oxygen limitation in the bioreactor.     

Bioreactor operation for transgenic Nicotiana tabacum cell cultures and continuous production of recombinant human granulocyte-macrophage colony-stimulating factor by perfusion culture

The production of hGM-CSF was investigated in both a flask and a 5-l bioreactor, using transgenic Nicotiana tabacum suspension cells. While the maximum cell density and secreted hGM-CSF in the flask were 15.4 g l⁻¹ and 6.5 μg l⁻¹, respectively, those in the bioreactor were 15.6 g l⁻¹ and 7.6 μg l⁻¹. No detectable growth inhibition, shorter production of hGM-CSF and reduced cell viability in the batch bioreactor were observed under the specific conditions used compared with the flask culture. To improve the productivity, a perfusion culture was carried out in the bioreactor, with three different perfusion rates (0.5, 1.0 and 2.0 day⁻¹). In all cases, the hGM-CSF in the medium was significantly increased during the overall culture period (16 days), with maximum values 3.0-, 9.4- and 6.0-fold higher than those obtained in the batch cultures, respectively, even though the intracellular hGM-CSF content was not significantly varied by the perfusion rate. In terms of the total amount of hGM-CSF secreted, 205.5, 1073.2 and 1246.3 μg accumulated in the perfusate within 16 days at the perfusion rates of 0.5, 1.0 and 2.0 day⁻¹, respectively. It was concluded that the beneficial effect of perfusion on the production of hGM-CSF originated from the reduced proteolytic degradation due to the lower protease activity caused by the perfusion. Additionally, the cell growth and physiology in the perfusion culture were somewhat negatively affected by the increased perfusion rate, although the dry cell density steadily increased, and as a result, 19.4, 22.4 and 22.9 g l⁻¹ of maximum cells were obtained with perfusion rates of 0.5, 1.0 and 2.0 day⁻¹, respectively. This work highlighted the importance of proteolytic degradation in plant cell cultures for the production of secretory proteins and the feasibility of perfusion strategies for the continuous production of foreign proteins by the prevention of protein loss due to proteolytic enzymes.     

The dinoflagellate Alexandrium minutum in Cape Town harbour (South Africa): Bloom characteristics, phylogenetic analysis and toxin composition

A novel bloom of Alexandrium minutum occurred in an inner basin of the Cape Town harbour from November 2003 to February 2004. Cellular concentrations reached a maximum of 1.4 × 10⁸ cells l⁻¹ during the mid-December period with corresponding chlorophyll a concentrations of 243 mg m⁻³. Primary productivity measurements conducted during the latter part of the bloom revealed a maximum assimilation number of 11.17 mg C mg Chl a⁻¹ h⁻¹ during the middle of the day. Productivity during this post-peak period was sustained largely by the reduced nitrogen species NH₄ and urea (96%) as measured using ¹⁵N tracer techniques. The large subunit ribosomal DNA sequence of A. minutum isolates from Cape Town harbour was identical to conspecifics collected in Western Europe and in Australia. The composition of tetrahydropurine neurotoxins associated with paralytic shellfish poisoning (PSP) was limited to gonyautoxins (GTX1-GTX4). This profile combined with evidence of a low toxin cell quota (1.5 fmol GTX cell⁻¹) supports a close association of this taxon with other members of the A. minutum species complex, particularly from Europe. Toxin analysis from black mussels collected during this bloom indicated that the accumulated PSP toxins originated from A. minutum and not from Alexandrium catenella as is most often the case along the South African coast.