Replication and incompatibility properties of plasmid pE194 in Bacillus subtilis.

pE194, a 3.5-kilobase multicopy plasmid, confers resistance to the macrolide-lincosamide-streptogramin B antibiotics in Bacillus subtilis. By molecular cloning and deletion analysis we have identified a replication segment on the physical map of this plasmid, which consists of about 900 to 1,000 base pairs. This segment contains the replication origin. It also specifies a trans-acting function (rep) required for the stable replication of pE194 and a negatively acting copy control function which is the product of the cop gene. The target sites for the rep and cop gene products are also within this region. Two incompatibility determinants have been mapped on the pE194 genome and their properties are described. One (incA) resides within the replication region and may be identical to cop. incB, not located in the replication region, expresses incompatibility toward a copy control mutant (cop-6) but not toward the wild-type replicon.     

Genetic analysis of bovine papillomavirus type 1 trans-acting replication factors.

The establishment of bovine papillomavirus type 1 in somatic mammalian cells is mediated by extrachromosomal replication and stable maintenance of the viral genome as a multicopy nuclear plasmid. Previous studies indicated the requirement of viral gene expression for bovine papillomavirus type 1 replication and plasmid maintenance (M. Lusky and M. R. Botchan, Cell 36:391-401, 1984; Turek et al., Proc. Natl. Acad. Sci. U.S.A. 79:7914-7918, 1982). To define the viral genes which are necessary for this process, we constructed a series of specific mutations within the viral genome and assayed the resulting mutants for their ability to replicate extrachromosomally in mouse C127 cells. We report here that the bovine papillomavirus type 1 trans-acting replication factors were encoded by at least two distinct viral genes since the mutants fell into two complementation groups, rep and cop. Mutants (rep-) affecting the E1 open reading frame (ORF) failed to replicate bovine papillomavirus type 1 DNA extrachromosomally and would integrate into chromosomal DNA. We suggest that this gene product is one of the factors required to specifically preclude the integration event. Mutants (cop-) affecting the E7 ORF were maintained in the extrachromosomal state; however, the copy number of the mutant genomes was reduced 100-fold compared with that of wild-type DNA. Analysis of single-cell subclones showed that each cell contained the mutant genomes at a copy number of one to two, indicating that the cop- phenotype did not reflect a simple segregation defect. We propose that the gene defined by mutations in the E7 ORF played a crucial role in stably maintaining the copy number of the viral plasmid at high levels. Genomes with mutations in the cop and rep complementation groups, when cotransfected, rescued the wild-type phenotype, extrachromosomal replication with a high, stable copy number for both types of plasmids. Therefore, the gene products acted in trans, and the mutations were recessive to the wild-type functions. One specific rep- mutant showed a 30-fold-increased transformation efficiency when compared with that of the wild-type genome. In addition, morphological transformation mediated by the cop- mutants appeared to be unstable. These results imply that either or both of the replication functions played some role in regulating the expression of the viral transforming functions.     

A single amino acid alteration in the initiation protein is responsible for the DNA overproduction phenotype of copy number mutants of plasmid R6K.

A novel type of high copy-number (cop) mutants of a mini-R6K plasmid were isolated. The mutations were mapped in the pir gene which encodes the pi initiation protein for plasmid R6K DNA replication. They resulted in an alteration by substitution of a single amino acid: threonine to isoleucine at the 108th position for the cop41, and proline to serine at the 113th position for the cop50, of the 305 amino acid pi protein. The cop41 mutation in the pi protein was found to be trans-dominant over the wild-type allele in the copy control of plasmid R6K. Moreover, it was shown that the altered pi protein was not overproduced in maxicells carrying this mutant plasmid and had a higher affinity to the repeated sequence which is present in the pir promoter region. Most likely the mutated pi protein also interacts more efficiently with the same repeated sequences, a target of pi, in the replication origin region and increases the frequency of the initiation event per cell division.     

An initiator protein for plasmid R6K DNA replication. Mutations affecting the copy-number control

Two kinds of mutations affecting the copy-number control of plasmid R6K were isolated and identified in an initiator pi protein by DNA sequencing. Firstly, a temperature-sensitive replication mutation, ts22, with decreased copy number results in a substitution of threonine to isoleucine at position 138 of the 305-amino-acid pi protein. Secondly, a high-copy-number (cop21) mutant was isolated from this ts mutant and was identified by an alteration of alanine to serine at position 162. This cop21 mutation suppressed the Ts character and was recessive to the wild-type allele in the copy control.     

The nucleotide sequence of the replication control region of the resistance plasmid R1drd-19

Summary The region of plasmid R1 containing the replication control genes has been sequenced using the Maxam-Gilbert method. The nucleotide sequence of two small PstI restriction fragments (a total of about 1,000 base pairs) was determined for the wildtype R1 plasmid as well as for two different copy mutants. It was found that one copy mutant has a single base substitution in the fragment which was recently shown to harbor an important inc/cop gene (Molin and Nordström 1980). Furthermore, the sequence indicates the presence of a structural gene that codes for a polypeptide of size 10,500 daltons. Possible gene products predicted from the nucleotide sequences and their role in replication control are discussed.     

Role of the cgtA gene function in DNA replication of extrachromosomal elements in Escherichia coli

The cgtA gene codes for a common GTP-binding protein whose homologues were found in all prokaryotic and eukaryotic organisms investigated so far. Although cgtA is an essential gene in most bacterial species, its precise functions in the regulation of cellular processes are largely unknown. In Escherichia coli, dysfunction or overexpression of the cgtA gene causes problems in various chromosomal functions, like synchronization of DNA replication initiation and partitioning of daughter chromosomes after a replication round. It is not know how the cgtA gene product regulates these processes. Here we investigated effects of cgtA dysfunction on replication of plasmid and phage replicons. We found that replication of some plasmids (e.g., ColE1-like) is not affected in the cgtA mutant. On the other hand, dysfunction of the cgtA gene caused a strong inhibition of lambda plasmid DNA replication. Bacteriophage lambda development was severely impaired in the cgtA mutant. Replication of other plasmid replicons (derivatives of F, R1, R6K, and RK2) was influenced by the cgtA mutation moderately. It seems that DNA synthesis per se is not affected by CgtA, and that this protein might control replication initiation indirectly, by regulation of function(s) or production of one or more replication factors. In fact, we found that level of the host-encoded replication protein DnaA is significantly decreased in the cgtA mutant. This indicates that CgtA is involved in the regulation of dnaA gene expression.     

The phenotypes of temperature-sensitive mini-RK2 replicons carrying mutations in the replication control gene trfA are suppressed nonspecifically by intragenic cop mutations.

The minimal replicon of the broad-host-range plasmid RK2 consists of the origin of vegetative replication (oriV) and a gene (trfA) encoding an essential replication protein that binds to short repeats in oriV. We report here the results of a DNA sequence analysis of seven unique mutants that are temperature sensitive for replication in Escherichia coli. The mutations (designated rts) were distributed throughout 40% of the downstream part of the trfA gene. Spontaneous revertants of the rts mutants were isolated, and further analysis of four such revertants demonstrated that the new phenotypes resulted from intragenic second-site copy up (cop) mutations. Subcloning experiments showed that all tested intragenic combinations of rts and cop mutations resulted in elimination or strong reduction of the temperature sensitivity of replication. This suppression was also observed under conditions where the mutant TrfA protein was provided in trans with respect to oriV, indicating that the reduction in temperature sensitivity could not be a TrfA protein dosage effect. The phenotypes of two of the cop mutants in Pseudomonas aeruginosa were analyzed; the results demonstrated that the mutants were either not functional or poorly functional in this host. The rts mutant plasmids were also reduced in their ability to replicate in P. aeruginosa, and the intragenic cop mutations did not improve the functionality of these mutants. The significance of the results is discussed in relation to current models of the mechanism of action of the TrfA protein.     

Temperature-sensitive replication of plasmid pKM101

A mutant of Escherichia coli K-12, IB10 carrying the ts10 mutation has been isolated. The mutation affects replication and inheritance of pKM101 plasmid. Incubation of the mutant under non-selective conditions of 42 degrees C resulted in the formation of R-cell population. The frequency of temperature-independent clones was 2,1 X 10(-5). The defect of pKM101 replication was shown to result in growth inhibition of host cells at a non-permissive temperature. The host growth only started after elimination of the plasmid. The mechanisms are likely to exist governing the participation of plasmid gene products in processes related to host growth. The influence of ts10 mutation on replication of other plasmids was studied. It was established that ts10 did not affect replication of R6K, RP4 and Flac+ plasmids. However, replication of R15, R205 as well as of pKM101 plasmid stopped under conditions of non-permissive temperature in IB10 mutant. Obviously, ts10 mutation results in defective replication of plasmids only belonging to the N-incompatibility group (IncPN). It is shown that R6K, RP4, Flac+ plasmids are not able to correct pKM101 replication in the mutant at 42 degrees C.     

Evidence for positive regulation of plasmid prophage P1 replication: integrative suppression by copy mutants.

Like low-copy-number plasmids including P1 wild type, multicopy P1 mutants (P1 cop, maintained at five to eight copies per chromosome) can suppress the thermosensitive phenotype of an Escherichia coli dnaA host by forming a cointegrate. At 40 degrees C in a dnaA host suppressed by P1 cop, the only copy of P1 is the one in the host chromosome. Trivial explanations of the lack of extrachromosomal copies of P1 cop have been eliminated: (i) during integrative suppression, the P1 cop plasmid does not revert to cop+; (ii) the dnaA+ function of the host is not required to maintain P1 cop at a high copy number; and (iii) integrative recombination does not occur within the region of the plasmid involved in regulation of copy number. Since there are no more copies of the chromosomal origin (now located within the integrated P1 plasmid) than in a P1 cop+-suppressed strain, the extra initiation potential of the P1 cop is not used to provide multiple initiations of the chromosome. When a P1 cop-suppressed dnaA strain was grown at 30 degrees C so that replication could initiate from the chromosomal origin as well as from the P1 origin, multicopy supercoiled P1 DNA was found in the cells. This plasmid DNA was lost again when the temperature was shifted back to 40 degrees C.     

Plasmid replication functions: two distinct segments of plasmid R1, RepA and RepD, express incompatibility and are capable of autonomous replication.

The genetic determinants for replication and incompatibility of plasmid R1 were investigated by gene cloning methods, and three types of R1 miniplasmid derivatives were generated. The first, exemplified by plasmid pKT300, consisted of a single BglII endonuclease-generated deoxyribonucleic acid fragment derived from the R1 region that is located between the determinants for conjugal transfer and antibiotic resistance. Two types of miniplasmids could be formed from PstI endonuclease-generated fragments of pKT300. One of these, which is equivalent to miniplasmids previously generated from plasmids R1-19 and R1-19B2, consisted of two adjacent PstI fragments that encode the RepA replication system of plasmid R1. The other type contained a segment of R1, designated the RepD replication region, that is adjacent to the RepA region and that has not been identified previously as having the capacity for autonomous replication. Plasmid R1, therefore, contained two distinct deoxyribonucleic acid segments capable of autonomous replication. The RepA-RepD miniplasmid pKT300 had a copy number about eightfold higher than that of R1 and hence lacked a determinant for the regulation of plasmid copy number. Like R1, it was maintained stably in dividing bacteria. RepA miniplasmids had copy numbers which were two- to fourfold higher than that of R1 (i.e., which were lower than that of pKT300) and were maintained slightly less stably than those of pKT300 and R1. The RepD miniplasmid was not maintained stably in dividing bacteria. Previous experiments have shown that incompatibility of IncFII group plasmids is specified by a plasmid copy control gene. Despite the fact that RepA miniplasmids of R1 were defective in copy control, they nevertheless expressed incompatibility. This suggests that two genes are responsible for plasmid copy control, one that specifies incompatibility and is located on RepA miniplasmids and another that is located outside of, but adjacent to, the RepA replication region. Hybrid plasmids composed of pBR322 and one PstI fragment from the RepA region, P-8, exhibited incompatibility towards R2 and RepA miniplasmids but not the RepD miniplasmid, whereas hybrids composed of pBR322 and the PstI fragment of the RepD region, P-3, exhibited incompatibility towards R1 and the RepD miniplasmid but not RepA miniplasmids. These results indicate that the two replication systems are functionally distinct and that, although the RepA system is the principal replication system of R1, the RepD system also plays a role in the maintenance of this plasmid.     

The nucleotide sequence of a DNA fragment from the replication origin of the antibiotic resistance factor R1drd19

Summary The recombinant plasmid pRK101 contains a DNA fragment which carries the complete replication origin of the antibiotic resistance factor R1drd-19 inserted into the vector plasmid pBR322. In a spontaneously arising mutant of this plasmid (pRK 103) a deletion of about 215 base pairs (bp) has been detected by heteroduplex analysis and mapping with restriction endonucleases. Essential parts of the replication origin must be located in the deleted sequence. The deletion mutant pRK103, in contrast to its parent plasmid pRK101 is not replicated under the control of the R1 replicon, even when the R1 factor or copy mutants of it are present within the same cell. These latter plasmids can complement a plasmid-specific protein not coded by pRK101 but essential for R1-directed replication. The nucleotide sequence of a 252 bp HpaII fragment covering about 170–200 bp of the deletion was determined. This piece of DNA is rich in G and C and contains a series of small palindromes, symmetrically arranged repeated sequences and short selfcomplementary structures which may be of significance for the initiation of the DNA replication. The possibility that the sequenced DNA fragment comprises a major part of the replication origin of R1drd-19 is discussed.     

Cloning of replication, incompatibility, and stability functions of R plasmid NR1.

The region of R plasmid NR1 that is capable of mediating autonomous replication was cloned by using EcoRI, SalI, and PstI restriction endonucleases. The only EcoRI fragment capable of mediating autonomous replication in either a pol+ or a polA host was fragment B. SalI fragment E joined in native orientation with the part of SalI fragment C that overlapped with EcoRI fragment B, and also two contiguous PstI fragments of sizes 1.6 and 1.1 kilobases from EcoRI fragment B-mediated autonomous replication. When these individual SalI fragments were cloned onto plasmid pBR313 or the individual PstI fragments were cloned onto plasmid pBR322, none of these single fragments could rescue the replication of the ColE1-like vectors in a polA host, even in the presence of a compatible "helper" plasmid derived from a copy mutant of NR1. In contrast to the results reported for closely related R plasmid R6, EcoRI fragment A of NR1 could not rescue the replication of ColE1 derivative RSF2124 in a polA(Am) mutant or in a polA(Ts) mutant at the restrictive temperature. Although capable of autonomous replication, EcoRI fragment B of NR1 (or smaller replicator fragments cloned from it by using other restriction enzymes) was not stably inherited in the absence of selection for the recombinant plasmid. When EcoRI fragment B was ligated to EcoRI fragment A of NR1, the recombinant plasmid was stable. Thus, EcoRI fragment A contained a stability (stb) function. The stb function did not act in trans since EcoRI fragment B was not stably inherited when a ColE1 derivative (RSF2124) ligated to EcoRI fragment A was present in the same cell. A cointegrate plasmid consisting of EcoRI fragment B of NR1 ligated to RSF2124 was also not stably inherited, whereas only EcoRI fragment B was unstable when both RSF2124 and EcoRI fragment B coexisted as autonomous plasmids in the same cell. The incompatibility gene of NR1 was shown to be located within the region of overlap between SalI fragment E and the PstI 1.1-kilobase fragment. A copy mutant of NR1 (called pRR12) was found to have greatly reduced incompatibility with NR1; this Inc- phenotype is cis dominant.     

Plasmid R1 is present as clusters in the cells of Escherichia coli

Fluorescence microscopy was used to determine the location(s) of the replication origin of plasmid R1 in exponentially growing cells of Escherichia coli. The number of oriR1 foci per cell was smaller than the number of R1 copies per cell and was found to be the same for a copA mutant of R1 and for the wild-type plasmid. The intensities of individual foci were stronger for the cop mutant than for the wild type. We interpreted these results to imply that the plasmid DNA molecules were localized in small groups/clusters, a result that seems contrary to the earlier observations that plasmid R1 replicates randomly and segregates as a single-copy unit. The implications for the quantitative behavior of plasmid R1 in stability, incompatibility tests, replication, and partition experiments are discussed.     

Origin and direction of replication of the bacteriocinogenic plasmid Clo DF13.

Cairn's type replicative intermediates of both the wildtype Clo DF13 plasmid and the copy mutant CLO DF13 cop3 were isolated by dye-buoyant density centrifugation. Replicative intermediates were linearized at the HpaI or Sa1I cleavage site, and examined with the electron-microscope. The data show that replication of both the Clo DF13 wild type plasmid and the Clo DF13 cop3 plasmid, initiates at about 2.8% on the physical map. Replication proceeds unindirectionally and counterclockwise on this map.     

Identification and characterization of mutations responsible for a runaway replication phenotype of plasmid R1

Initiation of replication of the resistance plasmid R1 is carefully regulated by the two negatively acting factors, CopA and CopB. It is shown here that the temperature-dependent runaway-replication phenotype of an R1 plasmid mutant is caused by two point mutations in each of the promoters for the genes of these control factors. Expression of the two genes is affected in the following way: (1) one C-to-T transition in the putative -35 box of the copB-repA operon creates a two- to three-fold stronger promoter from which expression is temperature-dependent; (2) another C-to-T transition in a G + C-rich area immediately downstream from the -10 box of the copA promoter reduces expression of the copA gene three-fold. The phenotypic consequences of the two mutations are discussed in the light of the current model for R1 replication control.     

Translational control by antisense RNA in control of plasmid replication

Control of replication of plasmids involves two processes: measurement of the copy number of the plasmid and adjustment of the replication frequency accordingly. For both these processes IncFII plasmids use an antisense RNA (CopA RNA) that forms a duplex with the upstream region (CopT) of the mRNA of the rate-limiting RepA protein. The kinetics of duplex formation was measured in vitro for the wild type and for a cop mutant plasmid; the mutant showed a reduction in the second-order rate constant for the formation of the RNA duplex and a similar increase in copy number. Hence, the kinetics of duplex formation and the concentration of CopA RNA determines the copy number of the plasmid.     

Replication control functions of plasmid R1 act as inhibitors of expression of a gene required for replication

Summary Construction of translational fusions betwen the repA gene of plasmid R 1 (required for replication) and the lacZ gene has allowed a quantitative analysis of expression of this gene. It is suggested that the replication of R 1 is controlled by two replication control functions acting as inhibitors of repA expression.     

Eclipse period during replication of plasmid R1: contributions from structural events and from the copy-number control system

The eclipse period (the time period during which a newly replicated plasmid copy is not available for a new replication) of plasmid R1 in Escherichia coli was determined with the classic Meselson-Stahl density-shift experiment. A mini-plasmid with the wild-type R1 replicon and a mutant with a thermo-inducible runaway-replication phenotype were used in this work. The eclipses of the chromosome and of the wild-type plasmid were 0.6 and 0.2 generation times, respectively, at temperatures ranging from 30 degrees C to 42 degrees C. The mutant plasmid had a similar eclipse at temperatures up to 38 degrees C. At 42 degrees C, the plasmid copy number increased rapidly because of the absence of replication control and replication reached a rate of 350-400 plasmid replications per cell and cell generation. During uncontrolled replication, the eclipse was about 3 min compared with 10 min at controlled replication (the wild-type plasmid at 42 degrees C). Hence, the copy-number control system contributed significantly to the eclipse. The eclipse in the absence of copy-number control (3 min) presumably is caused by structural requirements: the covalently closed circular plasmid DNA has to regain the right degree of superhelicity needed for initiation of replication and it takes time to assemble the initiation factors.