Rapid analysis of amplified double-stranded DNA by capillary electrophoresis with laser-induced fluorescence detection

DNA amplification technology has been applied to clinical diagnosis of infectious disease, genetic disorder, and cancer. After in vitro amplification of a particular DNA region, the methods of analysis for these amplified samples play a pivotal role in clinical diagnosis. Conventional gel electrophoresis has been routinely used in the lab for checking DNA. The whole procedure is time consuming and requires more than 1 ng of DNA for detection. To achieve greater performance in DNA diagnosis, we demonstrated capillary electrophoresis with laser induced fluorescence detection for analysis of amplified DNA. The analysis of DNA could be completed within 3 min and the data is directly entered into the computer. Considering the automatic and rapid process, we believe that this method could be routinely utilized for the clinical diagnosis of amplified DNA products.     

Automated DNA mutation analysis by single-strand conformation polymorphism using capillary electrophoresis with laser-induced fluorescence detection

Automation is essential for rapid genetic-based mutation analysis in clinical laboratory to screen a large number of DNA samples. We propose in this report an automatic process using Beckman Coulter P/ACE™ capillary electrophoresis (CE) with laser-induced fluorescence (LIF) system to detect a single-point mutation in the codon 12 of human K-ras gene. Polymerase chain reaction (PCR) using a fluorescently labeled reverse primer and a plain forward primer to specifically amplify a selected 50 bp DNA fragment in human K-ras gene. The amplified DNA is placed on the sample tray of the CE system with a pre-programmed step for single-strand conformation polymorphism (SSCP) analysis. Sample injection and denaturation processes are performed online along with separation and real-time data analysis. The concept of automation for rapid DNA mutation analysis using CE-LIF system for SSCP is presented.     

Direct quantification of gene expression using capillary electrophoresis with laser-induced fluorescence

Quantification of gene expression provides valuable information regarding the response of cells or tissue to stimuli and often is accomplished by monitoring the level of messenger RNA (mRNA) being transcribed for a particular protein. Although numerous methods are commonly used to monitor gene expression, including Northern blotting, real-time polymerase chain reaction, and RNase protection assay, each method has its own drawbacks and limitations. Capillary electrophoresis with laser-induced fluorescence (CE-LIF) can reduce protocol time, eliminate the need for radioactivity, and provide superior sensitivity and dynamic range for quantification of RNA. In addition, CE-LIF can be used to directly determine the amount of an RNA species present, something that is difficult and not normally accomplished using current methods. Gene expression is detected using a fluorescently labeled riboprobe specific for a given RNA species. This direct approach was validated by analyzing levels of 28S RNA and also used to determine the amount of discoidin domain receptor 2 mRNA in cardiac tissue.     

Saturation fluorescence labeling of proteins for proteomic analyses

We present here an optimized and cost-effective approach to saturation fluorescence labeling of protein thiols for proteomic analysis. We investigated a number of conditions and reagent concentrations, including the disulfide reducing agent tris(2-carboxyethyl)phosphine (TCEP), pH, incubation time, linearity of labeling, and saturating dye/protein thiol ratio with protein standards to gauge specific and nonspecific labeling. Efficacy of labeling under these conditions was quantified using specific fluorescence estimation, defined as the ratio of fluorescence pixel intensities and Coomassie-stained pixel intensities of bands after digital imaging. Factors leading to specific versus nonspecific labeling in the presence of thiourea are also discussed. We found that reproducible saturation of available Cys residues of the proteins used as labeling standards (human carbonic anhydrase I, enolase, and α-lactalbumin) is achieved at 50- to 100-fold excess of the uncharged maleimide-functionalized BODIPY dyes over Cys. We confirmed our previous findings, and those of others, that the maleimide dyes are not affected by the presence of 2 M thiourea. Moreover, we established that 2 mM TCEP used as reductant is optimal. We also established that labeling is optimal at pH 7.5 and complete after 30 min. Low nonspecific labeling was gauged by the inclusion of non-Cys-containing proteins (horse myoglobin and bovine carbonic anhydrase) to the labeling mixture. We also showed that the dye exhibits little to no effect on the two-dimensional mobilities of labeled proteins derived from cells.     

北京油鸡MSAP毛细管电泳荧光检测技术的建立

采用毛细管电泳荧光检测技术, 对北京油鸡肌肉组织基因组进行甲基化敏感扩增片段多态性(Methylation sensitive amplified polymorphism, MSAP)检测。通过对基因组DNA用量、预扩产物稀释倍数、选择性引物浓度、Mg2+浓度、dNTPs浓度和电泳内标量等6个主要参数进行分析和优化, 建立了适合北京油鸡基因组DNA甲基化分析的MSAP毛细管电泳荧光检测技术。重复实验表明, 建立的毛细管电泳荧光标记的MSAP检测技术能够自动地、高通量地分析北京油鸡基因组的DNA甲基化状态, 也适用于其他动植物基因组的DNA甲基化研究。     

Separation and determination of peptide hormones by capillary electrophoresis with laser-induced fluorescence coupled with transient pseudo-isotachophoresis preconcentration

A new method for the determination of the peptide hormones and their fragments by capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection and transient pseudo-isotachophoresis (pseudo-tITP) preconcentration was established in this study. The LIF detector used an argon ion laser with excitation wavelength at 488 nm and emission wavelength at 535 nm. Fluorescein isothiocyanate (FITC) was used as precolumn derivatization reagent to label cholecystokinin tetrapeptide (CCK-4), neurotensin (NT), neurotensin hexapeptide (NT_8–13), and neurokinin B (NKB). Borate (10 mmol/L, pH 9.0) was selected as derivatization medium to get the high efficiency. When the addition of 70% (v/v) methanol and 1% (m/v) sodium chloride (NaCl) to the sample matrix, and with borate buffer (110 mM, pH 9.5) and 20% (v/v) methanol as running buffer, a preconcentration based on the pseudo-tITP afforded 100-fold improvement in peak heights compared with the traditional hydrodynamic injection (2.3% capillary volume). The detection limits (signal/noise = 3) based on peak height were found to be 0.04, 0.1, 0.2, and 0.08 nmol/L for NT_8–13, NT, NKB, and CCK-4, respectively. The method was validated and applied to qualitative analysis of NT and NT_8–13 in human cerebrospinal fluid sample.     

Cloning of AFLP markers detected by fluorescence capillary electrophoresis

The available methods to isolate specific amplified fragment length polymorphism (AFLP) markers can be used only if markers are detected by radioactive labeling, silver staining, or ethidium bromide staining; these methods are useless if modern and automated genetic analyzers are used to detect AFLP markers by fluorescent labeling. We have developed a method that allows for isolation and cloning of specific AFLP markers obtained with a laser-induced fluorescence capillary electrophoresis system. This procedure has been tested on 5Arabidopsis thaliana polymorphic AFLP markers, and the nucleotide sequences obtained from these cloned markers were identified and located in theArabidopsis genome.     

MitoTracker Green labeling of mitochondrial proteins and their subsequent analysis by capillary electrophoresis with laser-induced fluorescence detection

MitoTracker Green (MTG) is a mitochondrial-selective fluorescent label commonly used in confocal microscopy and flow cytometry. It is expected that this dye selectively accumulates in the mitochondrial matrix where it covalently binds to mitochondrial proteins by reacting with free thiol groups of cysteine residues. Here we demonstrate that MTG can be used as a protein labeling reagent that is compatible with a subsequent analysis by capillary electrophoresis with laser-induced fluorescence detection (CE-LIF). Although the MTG-labeled proteins and MTG do not seem to electrophoretically separate, an enhancement in fluorescence intensity of the product indicates that only proteins with free thiol groups are capable of reacting with MTG. In addition we propose that MTG is a partially selective label towards some mitochondrial proteins. This selectivity stems from the high MTG concentration in the mitochondrial matrix that favors alkylation of the available thiol groups in this subcellular compartment. To that effect we treated mitochondria-enriched fractions that had been prepared by differential centrifugation of an NS-1 cell lysate. This fraction was solubilized with an SDS-containing buffer and analyzed by CE-LIF. The presence of a band with fluorescence stronger than MTG alone also indicated the presence of an MTG-protein product. Confirming that MTG is labeling mitochondrial proteins was done by treating the solubilized mitochondrial fraction with 5-furoylquinoline-3-carboxaldehyde (FQ), a fluorogenic reagent that reacts with primary amino groups, and analysis by CE-LIF using two separate detection channels: 520 nm for MTG-labeled species and 635 nm for FQ-labeled species. In addition, these results indicate that MTG labels only a subset of proteins in the mitochondria-enriched fraction.     

Determination of octopamine in human plasma by capillary electrophoresis with optical fiber light-emitting diode-induced fluorescence detection

A new analytical method based on capillary electrophoresis (CE) separation and optical fiber light-emitting diode (LED)-induced fluorescence detection has been developed for the determination of octopamine. Naphthalene-2,3-dicarboxaldehyde (NDA) was used for precolumn derivatization of octopamine. The separation and determination of the derivative was performed using a laboratory-built CE system with an optical fiber LED-induced fluorescence detector. Optimal separation was obtained at 20 kV using a background electrolyte solution consisting of 25 mM sodium borate (pH 9.2). High sensitivity detection was achieved by the optical fiber LED-induced fluorescence detection using a purple LED as the excitation source. The limit of detection (signal/noise=3) for octopamine was 5.0 x 10(-9)M. A calibration curve ranging from 1.0 x 10(-8) to 5.0 x 10(-7)M was shown to be linear. Using this method, the levels of octopamine in human plasma from healthy donors were determined.     

Applications of capillary isoelectric focusing with liquid-core waveguide laser-induced fluorescence whole-column imaging detection

Capillary isoelectric focusing (CIEF) with liquid-core waveguide (LCW) laser-induced fluorescence (LIF) whole-column imaging detection (WCID) is a recently developed high-resolution, high-sensitivity, and high-speed analytical tool for protein analysis. Several potential applications of this system were demonstrated in this study. First, this system was employed to separate naturally fluorescent phycobiliproteins. Second, denaturing CIEF was suggested to study the conformational and chemical microheterogeneity and to characterize proteins with identical pI values. Third, a modified noncovalent fluorescent labeling procedure was presented, which allows the simple and effective labeling of proteins, antibodies, and viruses with reduced multiple labeling and preserved activity. Finally, extracellular proteins were suggested as signaling biomarkers for evaluation of cell viability. The separation of cyanobacteria and their extracellular phycoerythrins was demonstrated. The effectiveness of CIEF-LCW-LIF-WCID for the analysis of proteins, antibodies, viruses, and cells has been illustrated.     

Determination of vigabatrin by capillary electrophoresis with laser-induced fluorescence detection

A new analytical method for vigabatrin based on capillary electrophoretic separation and laser-induced fluorescence detection has been developed. 5-Carboxytetramethylrhodamine succinimidyl ester was used for precolumn derivatization of the non-fluorescent drug. Optimal separation and detection were obtained with an electrophoretic buffer of 50 mM sodium borate (pH9.5) containing 10 mM sodium dodecyl sulfate and a green He-Ne laser (excitation at 543.5 nm, emission at 589 nm). The concentration limit of detection in aqueous solution was 24 nM. Combined with a simple cleanup procedure, this method can be applied to the determination of vigabatrin in human plasma. A calibration curve ranging from 1.5 to 200 microM shown to be linear. Both the within-day and day-to-day reproducibilities and accuracies were less then 14.3% and 4.9% respectively. The limit of detection of vigabatrin in plasma was about 0.13 microM     

Measuring DNA damage using capillary electrophoresis with laser-induced fluorescence detection

Damage to cellular DNA is implicated in the early stages of carcinogenesis and in the cytotoxicity of many anticancer agents, including ionizing radiation. Sensitive techniques are required for measuring cellular levels of DNA damage. We describe in detail a novel immunoassay that makes use of the resolving power of capillary electrophoresis and the sensitivity of laser-induced fluorescence detection. An example is given of the detection of thymine glycol in DNA produced by irradiation of human cells with a clinical dose of 2 Gy. A detection limit of approximately 10(-21) mol allowed us to monitor the repair of the lesion and to suggest that the cellular repair response may be inducible.     

Determination of LSD in blood by capillary electrophoresis with laser-induced fluorescence detection

Capillary electrophoresis (CE) with HeCd laser-induced fluorescence (LIF) detection and its application in forensic toxicology is demonstrated by the determination of

Full-size image

-lysergic acid diethylamide (LSD) in blood. Following precipitation of proteins, washing of the evaporated supernatant and extraction, the residue was reconstituted in methanol and injected electrokinetically (10 s, 10 kV). The total analysis time for quantification of LSD was 8 min using a citrate–methanol buffer, pH 4.0. With this buffer system it is possible to separate LSD, nor-LSD, iso-LSD and iso-nor-LSD. Using a specific sample preparation, electrokinetic injection, extended light path (bubble cell) capillaries and especially LIF detection (λ_ex 325 nm, λ_em 435 nm), a limit of detection of 0.1–0.2 ng LSD per ml blood could be obtained. The limit of quantitation was about 0.4–0.5 ng/ml. The quantitative evaluation for LSD was carried out using methylergometrine as internal standard. The precision expressed as coefficient of variation (C.V.) and accuracy of the method were <20% and 86–110%, respectively. The application of the method to human blood samples from two forensic cases and a comparison with radioimmunoassay demonstrated that the results were consistent.     

Determination of duloxetine in human plasma by capillary electrophoresis with laser-induced fluorescence detection

A method based on capillary electrophoresis has been developed for the analysis of the novel antidepressant drug duloxetine in human plasma. The method makes use of laser-induced fluorescence detection after derivatisation of the analyte with 5-(4,6-dichlorotriazinyl)aminofluorescein at pH 11. A single step liquid/liquid extraction procedure with a mixture of hexane/2-propanol allows the sample clean-up with extraction yields always ≥84% and interference removal. The electrophoretic separation is achieved using uncoated fused silica capillaries (60.0 cm effective length, 75.0 cm total length, 50 μm internal diameter) and a background electrolyte composed of borate buffer (40 mM, pH 10.3), tetrabutylammonium bromide (10 mM), and acetone (10%, v/v). The applied voltage is 20 kV; the samples are injected by pressure (50 mbar × 8 s). The method has been fully validated in terms of linearity range (2.5–150 ng mL^?1), LOD and LOQ (1.0 and 2.5 ng mL^?1, respectively), precision (R.S.D. < 6.7%) and accuracy (recovery >78%). Application to samples obtained from patients under treatment with duloxetine gave good results. The method represents the first application of capillary electrophoresis to the analysis of duloxetine in human plasma.     

Separation and detection of vitellogenin in fish plasma by capillary zone electrophoresis

A method for coupling capillary zone electrophoresis (CZE) with rapid membrane chromatography purification (RMCP) was established for the analysis of vitellogenin (VTG) in male fish plasma induced with 17ss-estrodiol. CZE analyses of purified VTG were performed in a buffer containing 25 mM sodium borate (pH 8.4). A 50 microm i.d. fused-silica capillary was used for separation and the detection was carried out by UV-diode array at 214 nm. Inter- and intra-assay variabilities of the proposed method were less than 10.06 and 1.95%, respectively. The method has good linear relationship over the scope of 15-2250 microg/ml with a correlation coefficient of R2 = 0.9965 and a detection limit of 7.0 microg/ml. The established CZE method was also applied to directly separate and identify VTG from fish plasma. The results indicated this method could minimize interferences from plasma proteins, allowing the detection of at least 62.5 microg/ml of VTG proteins in total proteins. This is a rapid and easy method to determine the quantity and purity of VTG compared to Bradford method and SDS-PAGE.     

Peptic and tryptic digestion of peptides and proteins monitored by capillary electrophoresis with contactless conductivity detection

The feasibility of monitoring the peptic and tryptic digestion of peptides and proteins with capillary electrophoresis using contactless conductivity detection was investigated. The peptide minigastrin I and the proteins cytochrome c from bovine heart, human serum albumin (HSA), myoglobin, and bovine serum albumin (BSA) were digested off-line with pepsin, and the resulting peptide and amino acid fragments were successfully separated and detected by conductivity measurement. Cytochrome c and myoglobin were also subjected to off-line cleavage with trypsin. On-line digestion using the electrophoretically mediated microanalysis (EMMA) approach was demonstrated with cytochrome c and apomyoglobin using trypsin.     

Determination of glycosaminoglycan monosaccharides by capillary electrophoresis using laser-induced fluorescence detection

A newly developed capillary electrophoretic method using laser-induced fluorescence detection (CE-LIF) for the analysis of monosaccharides released from acid hydrolysis of glycosaminoglycans was studied. The method was compared with a previously published method using indirect LIF detection (CE-ILIF). For the CE-LIF method, electrophoretic conditions for the separation of the monosaccharides derivatised with 8-aminopyrene-1,3,6-trisulfonate (APTS) were optimised. The best separations were obtained using 100 mM acetate at pH 4.5 as running buffer. The influence of the injection vial volume on the precision and stability of the sample in different conditions was studied. The detection limits of the CE-LIF method were found to be 0.4-0.6 nM, while those obtained by CE-ILIF ranged from 11.4 to 14.3 microM. Other quality parameters of the method, such as run-to-run precision, day-to-day precision, and linearity were also determined. Finally, the new method was applied to the analysis of the acid hydrolysis products from a glucosaminoglycan (heparin) and a galactosaminoglycan (dermatan sulfate) and cross-contamination between the two solutions was determined. The high sensitivity of the new method allows the determination of dermatan sulfate contaminations in a heparin raw sample down to 0.04% (w/w) and broadens the practical applicability of CE-LIF for the quantitation of the endogenous levels of glycosaminoglycans in animal samples and for pharmacokinetic control after therapeutical heparin administration.     

Analysis of glycosaminoglycan-derived disaccharides by capillary electrophoresis using laser-induced fluorescence detection

A quantitative and highly sensitive method for the analysis of glycosaminoglycan (GAG)-derived disaccharides that relies on capillary electrophoresis (CE) with laser-induced fluorescence detection is presented. This method enables complete separation of 17 GAG-derived disaccharides in a single run. Unsaturated disaccharides were derivatized with 2-aminoacridone to improve sensitivity. The limit of detection was at the attomole level and approximately 100-fold more sensitive than traditional CE-ultraviolet detection. A CE separation timetable was developed to achieve complete resolution and shorten analysis time. The relative standard deviations of migration time and peak areas at both low and high concentrations of unsaturated disaccharides are all less than 2.7 and 3.2%, respectively, demonstrating that this is a reproducible method. This analysis was successfully applied to cultured Chinese hamster ovary cell samples for determination of GAG disaccharides. The current method simplifies GAG extraction steps and reduces inaccuracy in calculating ratios of heparin/heparan sulfate to chondroitin sulfate/dermatan sulfate resulting from the separate analyses of a single sample.     

Electrochemical profiles of Herba Saussureae Involucratae by capillary electrophoresis with electrochemical detection

A high-performance capillary electrophoresis with electrochemical detection method has been developed for the determination of the pharmacologically active ingredients, acacetin, rutin, umbelliferone, kaempferol, apigenin, luteolin and quercetin, in Herba Saussureae Involucratae. Under optimum conditions, the seven analytes could be completely separated within 19 min in a 75 cm length capillary at a separation voltage of 16 kV in a 50 mM borax running buffer (pH 9.2). A 300 microm diameter carbon disk electrode, positioned opposite the outlet of the capillary in a wall-jet configuration at a potential of +950 mV (vs a saturated calomel electrode) was used as the working electrode. A good linear relationship was established between peak current and concentration of the analytes over two orders of magnitude with detection limits (signal-to-noise ratio = 3) ranging from 1.2 x 10(-7) to 4.1 x 10(-8) g/mL for all analytes. The proposed method has been successfully applied to the analyses of bio-active components of Herba Saussureae Involucratae samples after a relatively simple extraction procedure. The assay results show that the resultant electrochemical profiles are indicative of the content diversity of each electrochemically active ingredient in the various samples, and may also offer some evidence for phytotaxonomy.