Adsorption of metal complex dyes from aqueous solutions by pine sawdust

An attempt to alleviate the problem caused by the presence of metal complex dyes, mostly used in textile industries, in the textile effluents was undertaken. The effects of adsorbent particle size, pH, adsorbent dose, contact time and initial dye concentrations on the adsorption of metal complex dyes by pine sawdust was investigated. Acidic pH was favorable for the adsorption of metal complex dyes. A contact time of 120 min was required to reach the equilibrium. The experimental isotherm data were analyzed using the Langmuir, Freundlich and Temkin equations. The equilibrium data fit well the Langmuir isotherm. The monolayer adsorption capacities are 280.3 and 398.8 mg dye per g of pine sawdust for Metal Complex Blue and Metal Complex Yellow, respectively. The results indicate that pine sawdust could be employed as low-cost alternative to commercial activated carbon in aqueous solution for the removal of metal complex dyes.     

Biosorption of reactive dyes by dried activated sludge: equilibrium and kinetic modelling

The biosorption of reactive dyes (Reactive Blue 2 - RB2 and Reactive Yellow 2 - RY2) onto dried activated sludge was investigated. The dye binding capacity of biosorbent was shown as a function of initial pH, initial dye concentration and type of dye. The equilibrium data fitted very well to both the Freundlich and Langmuir adsorption models. The results showed that both the dyes uptake processes followed the second-order rate expression.     

Equilibrium and a two-stage batch adsorber design for reactive or disperse dye removal to minimize adsorbent amount

The adsorption of a reactive dye (Reactive Yellow K-4G) and a disperse dye (Disperse yellow brown S-2RFL) onto polyepicholorohydrin-dimethylamine (EPIDMA) cationic polymer modified bentonite (EPIDMA-bentonite) in batch adsorber was studied, respectively. Two equilibrium models, the Langmuir and Freundlich models were selected to follow the adsorption process. It was shown that the equilibrium experimental data for reactive dye adsorption could be well described by the Freundlich model, but for disperse dye the Langmuir model could be better. Based on the well correlated adsorption isotherm, an adsorption process design model was developed for the design of a two-stage batch adsorber to predict the minimum amount of adsorbent to achieve a specified percentage of dye removal at a given volume of wastewater effluents. The adsorption process design analysis indicated that compared with the single-stage batch adsorption, the two-stage process could significantly save adsorbent to meet the higher demands of dye removal efficiency.     

Characterization of mesoporous activated carbons prepared by pyrolysis of sewage sludge with pyrolusite

Activated carbons were prepared from sewage sludge by chemical activation. Pyrolusite was added as a catalyst during activation and carbonization. The influence of the mineral addition on the properties of the activated carbons produced was evaluated. The results show that activated carbons from pyrolusite-supplemented sewage sludge had up to a 75% higher BET surface area and up to a 66% increase in mesoporosity over ordinary sludge-based activated carbons. Batch adsorption experiments applying the prepared adsorbents to synthetic dye wastewater treatment yielded adsorption data well fitted to the Langmuir isotherm. The adsorbents from pyrolusite-supplemented sludges performed better in dye removal than those without mineral addition, with the carbon from pyrolusite-augmented sludge T2 presenting a significant increase in maximum adsorption capacity of 50 mg/g. The properties of the adsorbents were improved during pyrolusite-catalyzed pyrolysis via enhancement of mesopore production, thus the mesopore channels may provide fast mass transfer for large molecules like dyes.     

Scavenging Rhodamine B dye using moringa oleifera seed pod

Moringa oliferia seed pod was modified using orthophosphoric acid (H₃PO₄) and used as adsorbent for sequestering Rhodamine B (Rh-B) dye from aqueous solution. The acid-modified adsorbent (MOSPAC) was characterized using Scanning Electron microscopy (SEM), Fourier Transform Infra Red (FTIR), Energy Dispersive X-ray (EDX), pH point of zero charge (pH_pzc) and Boehm Titration (BT) techniques, respectively. Operational parameters such as contact time, initial dye concentration, adsorbent dosage, pH and solution temperature were studied in batch process. Optimum dye adsorption was observed at pH 3.01. Equilibrium adsorption data was tested data using four different isotherm models: Langmuir, Freundlich, Temkin and Dubinin-Radushkevich. Langmuir isotherm model fitted most with maximum monolayer adsorption capacity of 1250 mg g^–1. Pseudo-second-order kinetic model provided the best correlation for the experimental data. Thermodynamic study showed that the process is endothermic, spontaneous and feasible. MOSPAC is an effective adsorbent for the removal of RhB dye from aqueous solutions.     

Characteristics of PAHs adsorption on inorganic particles and activated sludge in domestic wastewater treatment

The occurrence of polycyclic aromatic hydrocarbons (PAHs) in a domestic wastewater treatment plant (WWTP) was investigated in a 1 year period. In order to understand how PAHs were removed at different stages of the treatment process, adsorption experiments were conducted using quartz sand, kaolinite, and natural clay as inorganic adsorbents and activated sludge as organic adsorbent for adsorbing naphthalene, phenanthrene, and pyrene. As a result, the adsorption of PAHs by the inorganic adsorbents well followed the Langmuir isotherm while that by the activated sludge well followed the Freundlich isotherm. By bridging equilibrium partitioning coefficient with the parameters of adsorption isotherm, a set of mathematical models were developed. Under an assumption that in the primary settler PAHs removal was by adsorption onto inorganic particles and in the biological treatment unit it was by adsorption onto activated sludge, the model calculation results fairly reflected the practical condition in the WWTP.     

Biosorption of textile dyes by biomass derived from Kluyveromyces marxianus IMB3

Since it had previously been found that biomass derived from the thermotolerant ethanol-producing yeast strain Kluyveromyces marxianus IMB3 exhibited a relatively high affinity for heavy metals it was decided to determine whether or not it might be capable of textile dye biosorption. To this end, biosorption isotherm analysis was carried out using the biomass together with commonly-used textile dyes including Remazol Black B, Remazol Turquoise Blue, Remazol Red, Remazol Golden Yellow and Cibacron Orange. Although the dyes Remazol Black B, Remazol Turquoise Blue and Remazol Red adhered to the Langmuir model, the remaining dyes failed to do so. The observed biosorption capacities at equilibrium dye concentrations of 100?mg/l were compared and it was found that the biomass exhibited a significant affinity for each dye. The potential use of this biosorptive material in the bioremediation of textile processing effluents is discussed.     

Removal of methylene blue by invasive marine seaweed: Caulerpa racemosa var. cylindracea

Caulerpa racemosa var. cylindracea is one of the well-known invasive species in the Mediterranean Sea. In the present study, dried biomass of C. racemosa var. cylindracea was shown to have adsorption capacity for methylene blue. The adsorption reached equilibrium at 90 min for all studied concentrations (5-100mg/L). The pseudo-second-order model is well in line with our experimental results. There was a sharp increase in the adsorbed dye amount per adsorbent amount from 3.3 to 16.7 g/L, then a slight increase up to 66.7 g/L was observed. Langmuir and Freundlich's models were applied to the data related to adsorption isotherm. According to Langmuir's model data, the observed maximum adsorption capacity (qm) was 5.23 mg/g at 18 degrees C. The enthalpy of adsorption was found to be 33 kJ/mol, which indicated a chemical adsorption between dye molecules and C. racemosa var. cylindracea functional groups.     

Comparison of optimised isotherm models for basic dye adsorption by kudzu

This study assesses the use of dried (5% w/w moisture) kudzu (Peuraria lobata ohwi) as an adsorbent medium for the removal of two basic dyes, Basic Yellow 21 and Basic Red 22, from aqueous solutions. The extent of adsorption was measured through equilibrium sorption isotherms for the single component systems. Equilibrium was achieved after 21 days. The experimental isotherm data were analysed using Langmuir, Freundlich, Redlich-Peterson, Temkin and Toth isotherm equations. A detailed error analysis was undertaken to investigate the effect of using different error criteria for the determination of the single component isotherm parameters. The performance of the kudzu was compared with an activated carbon (Chemviron F-400). Kudzu was found to be an effective adsorbent for basic dye colour removal; though its capacity for colour removal was not as high as an activated carbon, the potential appeared to exist to use it as an alternative to activated carbon where carbon cost was prohibitive.     

Spent Rooibos (Aspalathus linearis) Tea Biomass as an Adsorbent for Organic Dye Removal

Spent rooibos (Aspalathus linearis) tea biomass can be used as an inexpensive biosorbent for xenobiotic removal. Seventeen dyes have been tested for their affinity to spent rooibos tea biomass. Eight dyes were used to study the adsorption process in detail. The dye adsorption has been described with the Langmuir isotherm. The calculated maximum adsorption capacities reached the value of over 200 mg of dye per gram of dried rooibos biomass for Bismarck brown Y. Spent rooibos tea biomass was also magnetically modified by contact with microwave-synthesized magnetic iron oxide nano- and microparticles. This new type of magnetically responsive biocomposite material can be easily separated by means of strong permanent magnets. Both native and magnetically modified spent rooibos biomass have shown excellent adsorption capacities for various types of organic dyes, so they are highly promising adsorbents in environmental technologies for selected xenobiotic removal.     

Optimum Sorption Isotherm by Linear and Nonlinear Methods for Safranin onto Alkali-Treated Rice Husk

Rice husk, a lignocellulosic by-product of the agroindustry, was treated with alkali and used as a low-cost adsorbent for the removal of safranin from aqueous solution in batch adsorption procedure. In order to estimate the equilibrium parameters, the equilibrium adsorption data were analyzed using the following two-parameter isotherms: Freundlich, Langmuir, and Temkin. A comparison of linear and nonlinear regression methods in selecting the optimum adsorption isotherm was applied on the experimental data. Six linearized isotherm models (including four linearized Langmuir models) and three nonlinear isotherm models are thus discussed in this paper. In order to determine the best-fit isotherm predicted by each method, seven error functions namely, coefficient of determination (r ²), the sum of the squares of the errors (SSE), sum of the absolute errors (SAE), average relative error (ARE), hybrid fractional error-function (HYBRID), Marquardt's percent standard deviation (MPSD), and the chi-square test (χ²) were used. It was concluded that the nonlinear method is a better way to obtain the isotherm parameters and the data were in good agreement with the Langmuir isotherm model.     

Kinetic and Equilibrium Studies of Cr(VI) Biosorption by Dead <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> Biomass

Many studies have been carried out on the biosorption capacity of different kinds of biomass. However, reports on the kinetic and equilibrium study of the biosorption process are limited. In our experiments, the removal of Cr(VI) from aqueous solution was investigated in a batch system by sorption on the dead cells of Bacillus licheniformis isolated from metal-polluted soils. Equilibrium and kinetic experiments were performed at various initial metal concentrations, pH, contact time, and temperatures. The biomass exhibited the highest Cr(VI) uptake capacity at 50°C, pH 2.5 and with the initial Cr(VI) concentration of 300 mg/g. The Langmuir and Freundlich models were considered to identify the isotherm that could better describe the equilibrium adsorption of Cr(VI) onto biomass. The Langmuir model fitted our experimental data better than the Freundlich model. The suitability of the pseudo first-order and pseudo second-order kinetic models for the sorption of Cr(VI) onto Bacillus licheniformis was also discussed. It is better to apply the pseudo second-kinetic model to describe the sorption system.     

Kinetic and equilibrium studies on the biosorption of reactive black 5 dye by Aspergillus foetidus

An isolated fungus, Aspergillus foetidus had the ability to decolourize growth unsupportive medium containing 100 mg L(-1) of reactive black 5 (RB5) dye with >99% efficiency at acidic pH (2-3). Pre-treatment of fungal biomass by autoclaving or exposure to 0.1M sodium hydroxide facilitated more efficient uptake of dye as compared to untreated fungal biomass. Pre-equilibrium biosorption of RB5 dye onto fungus under different temperatures followed pseudo-second-order kinetic model with high degree of correlation coefficients (R(2)>0.99). Biosorption isotherm data fitted better into Freundlich model for lower concentrations of dye probably suggesting the heterogeneous nature of sorption process. Based on the Langmuir isotherm plots the maximum biosorption capacity (Q(0)) value was calculated to be 106 mg g(-1) at 50 degrees C for fungal biomass pre-treated with 0.1M NaOH. Thermodynamic studies revealed that the biosorption process was favourable, spontaneous and endothermic in nature. Recovery of both adsorbate (dye) and adsorbent (fungal biomass) was possible using sodium hydroxide. Recovered fungal biomass could be recycled number of times following desorption of dye using 0.1M NaOH. Fungal biomass pre-treated with NaOH was efficient in decolourizing solution containing mixture of dyes as well as composite raw industrial effluent generated from leather, pharmaceutical and dye manufacturing company.     

Adsorption step in the biological degradation of a textile dye

This research documents the removal of the dye Gris Lanaset G from aqueous solutions by fungal pellets. Adsorption of the dye by dead biomass pellets of Trametes versicolor was determined and compared with dye removal by enzymatic degradation. Six kinetic equations were fitted to the experimental adsorption data obtained. The results indicate that kinetics such as the Elovich equation, which considers that the rate-controlling step is the diffusion of the dye molecules, show the best fit. Nonlinear Langmuir and Freundlich equations were also fitted into the adsorption data, and it can be concluded that the adsorption equilibrium can be interpreted by the Langmuir isotherm. Adsorption plays an important role in the process of the elimination of color from textile wastewater, although not all of the elimination is due to this physical process when the microorganism is active. The removal of color (around 90%) with active microorganisms is greater than that obtained with the adsorption process.     

Influence of anoxic selectors on heavy metal removal by activated sludge

The goal of this research is to compare the metal binding characteristics of an anoxic selector activated sludge system and a conventional activated sludge system. Metal biosorption by biomass harvested from experimental systems was determined by a series of batch experiments. Heavy metals studied in this research were zinc, cadmium, and nickel. The sorption isotherm showed that the selector sludge had significantly higher sorption capacity than did the control sludge. Metal biosorption behavior closely followed a Freundlich isotherm model for equilibrium concentrations. ECP contents of biomass estimated by alkali extraction technique showed that ECP levels in the selector sludge significantly higher than that in the sludge harvested from the conventional system, indicating that the higher metal sorption capacity of selector sludge may be due to the selection of the ECP-producing bacteria (i.e., Zoogloca sp.) by the selector system.     

Experimental and kinetic studies on methylene blue adsorption by coir pith carbon

Varying the parameters such as agitation time, dye concentration, adsorbent dose, pH and temperature carried out the potential feasibility of thermally activated coir pith carbon prepared from coconut husk for removal of methylene blue. Greater percentage of dye was removed with decrease in the initial concentration of dye and increase in amount of adsorbent used. Kinetic study showed that the adsorption of dye on coir pith carbon was a gradual process. Lagergren first-order, second-order, intra particle diffusion model and Bangham were used to fit the experimental data. Equilibrium isotherms were analysed by Langmuir, Freundlich, Dubnin-Radushkevich, and Tempkin isotherm. The adsorption capacity was found to be 5.87 mg/g by Langmuir isotherm for the particle size 250-500 microm. The equilibrium time was found to be 30 and 60 min for 10 and 20 mg/L and 100 min for 30, 40 mg/L dye concentrations, respectively. A maximum removal of 97% was obtained at natural pH 6.9 for an adsorbent dose of 100 mg/50 mL and 100% removal was obtained for an adsorbent dose of 600 mg/50 mL of 10 mg/L dye concentration. The pH effect and desorption studies suggest that chemisorption might be the major mode of the adsorption process. The change in entropy (DeltaS0) and heat of adsorption (DeltaH0) of coir pith carbon was estimated as 117.20 J/mol/K and 30.88 kJ/mol, respectively. The high negative value of change in Gibbs free energy indicates the feasible and spontaneous adsorption of methylene blue on coir pith carbon.