共查询到20条相似文献,搜索用时 250 毫秒
1.
William L. Hylander 《American journal of physical anthropology》2013,150(2):247-259
This study tests the hypothesis that decreased canine crown height in catarrhines is linked to (and arguably caused by) decreased jaw gape. Associations are characterized within and between variables such as upper and lower canine height beyond the occlusal plane (canine overlap), maximum jaw gape, and jaw length for 27 adult catarrhine species, including 539 living subjects and 316 museum specimens. The data demonstrate that most adult male catarrhines have relatively larger canine overlap dimensions and gapes than do conspecific females. For example, whereas male baboons open their jaws maximally more than 110% of jaw length, females open about 90%. Humans and hylobatids are the exceptions in that canine overlap is nearly the same in both the sexes and so is relative gape (ca. 65% for humans and 110% for hylobatids). A correlation analysis demonstrates that a large portion of relative gape (maximum gape/projected jaw length) is predicted by relative canine overlap (canine overlap/jaw length). Relative gape is mainly a function of jaw muscle position and/or jaw muscle‐fiber length. All things equal, more rostrally positioned jaw muscles and/or shorter muscle fibers decrease gape and increase bite force during the power stroke of mastication, and the net benefit is to increase the mechanical efficiency during chewing. Similarly, more caudally positioned muscles and/or longer muscle fibers increase the amount of gape and decrease bite force. Overall, the data support the hypothesis that canine reduction in early hominins is functionally linked to decreased gape and increased mechanical efficiency of the jaws. Am J Phys Anthropol, 2013. © 2012 Wiley Periodicals, Inc. 相似文献
2.
Static adult intraspecific allometry of jaws and teeth was investigated in a sample of 100 Negro crania. The relations between tooth area, postcanine surface, incisor surface, and four viscerocranial measures were examined separately for males and females. Our results indicate a marked lack of morphological integration between P-sets within the orofacial subregion and a similar lack of correspondence between jaw size and tooth size. Allometric analyses indicate that mandibular length scales negatively allometric to maxilloalveolar length and to bigonial width, that canine base area scales positively to upper and lower jaw length, and that all the other teeth scale negatively to jaw length. The postcanine surface area was found to be negatively allometric to the canine base area, which in turn scaled isometrically to incisor surface. Hence, any lengthening of the mandible will tend to be associated with a relative shortening of the maxilla, with relatively larger canines and a relative reduction of the cheek teeth. 相似文献
3.
Adult static intraspecific allometry of jaw size and tooth area was evaluated in a sample of 100 Cercopithecus aethiops crania (50 male, 50 female). Tooth areas were calculated from mesiodistal and buccolingual measurements of all the teeth in both arcades and were scaled to four viscero-cranial measurements: bimaxillary breadth, maxillo-alveolar length, mandibular length and bigonial width. Allometric coefficients calculated for jaw dimensions alone indicate tighter viscerocranial integration in females than in males. A finding of note was that half of the variation in maxillo-alveolar length may be accounted for by variation in mandibular length: females are isometric, males negatively allometric.
A similar degree of allometric mosaicism was found when maxillary incisor size was scaled to maxillary length and width. In females, the relationship was negatively allometric, whilst incisor size in males was found to be unrelated to either. Negative allometry characterized the relationship of canine base area to jaw length in both sexes, with males additionally being positively allometric to mandibular width.
The scaling of postcanine tooth areas to jaw length was characterized by a dichotomous pattern: males showed significant mandibular integration whilst females showed only significant maxillary integration. Compensatory tooth size interaction between maxillary canine base area and the summed incisor and postcanine areas was suggested by the significant negative allometric relation between them. 相似文献
A similar degree of allometric mosaicism was found when maxillary incisor size was scaled to maxillary length and width. In females, the relationship was negatively allometric, whilst incisor size in males was found to be unrelated to either. Negative allometry characterized the relationship of canine base area to jaw length in both sexes, with males additionally being positively allometric to mandibular width.
The scaling of postcanine tooth areas to jaw length was characterized by a dichotomous pattern: males showed significant mandibular integration whilst females showed only significant maxillary integration. Compensatory tooth size interaction between maxillary canine base area and the summed incisor and postcanine areas was suggested by the significant negative allometric relation between them. 相似文献
4.
A study of variables and patterns in dental wear among 30 individuals in a colony of Macaca nemestrina shows that consideration of age and sex are crucial for understanding differential wear degrees on molar occlusal planes. With advanced age, this species of non-human primate undergoes obliteration of initial morphological characteristics through the gradual erosion of enamel. Wear gradients are differential from PM1-M3 in both sexes. It appears that there is a functional relationship between degrees of occlusal plane wear and the degree of wear on the canines, and that females show a greater degree of wear changes relative to males of equivalent age because of initial differences in canine length and robusticity due to sexual dimorphism. It appears that there is a direct relationship between occlusal wear plane changes and the degree of wear on the canines, with advanced differential wear showing up in individuals in whom years of maxillary canine honing, canine damage, and the normal wear of mastication has reduced dimensions of unworn permanent canines. Other considerations included in this study are the honing functions of the deciduous first mandibular molars and molar cusp height relative to canine function. 相似文献
5.
Combtooth blennies have recurved, fang-like caniniform teeth at the rear end of a single row of incisiform teeth. The lengths and positions of these canines were measured in the lower jaws of males of 14 species of Mediterranean Blenniidae. In four species, lower jaw canines were measured in males and females, while in one species, the upper jaw canines of both sexes were also measured. Relative (to body length) canine length in males tends to be significantly greater (10–40%) than in females. There are significant interspecific differences in relative canine length, with smaller species tending to have relatively larger teeth. No significant correlation was obtained between canine length and importance of animal prey in the diet, nor with 'hole fit' of males, which may be related with the intensity of paternal care. We suggest that canines in combtooth blennies are predominately used for predator deterrence and agonistic interactions. 相似文献
6.
J. W. Osborn 《American journal of physical anthropology》1987,73(2):193-207
A selection of mandibles from recent higher primates, fossil hominids, and hominoids has been studied from photographs of skulls, reproductions, and material published by others, all viewed in the sagittal plane. Tracings of each mandible were constructed so that the dentitions were all scaled to the same length (d) and superimposed. The (scaled) positions of the articular surfaces of the condyles (J = joint point) were compared. The height of each J point above the scaled dentition (h = effective condyle height) and its distance behind the dentition (r = effective ramus width) were compared. With very few exceptions d r > d/2. There was a poor correlation between r and the amount of prognathism. The position of the J point with respect to the occlusal plane was different for different groups within the material analysed and could prove to be a useful tool to help improve the reconstruction of fragmented fossil material. Some examples are given. A. afarensis and Homo habilis shared a low and anterior J point (r ~ d/2). The later australopithecines evolved a high and anterior J point, whereas that of Homo erectus was raised and displaced posteriorly (r ~ 3d/4). The value of r was increased to d in the Neanderthals, and recent man has moved the J point forward again. The effect of the position of the J point, the slope of the preglenoid plane, and the curve of Spee on the relationship between upper and lower postcanines when the jaw is opened and then closed to process food have been analysed. The results show that the position of the J point affects the way in which the mandible moves, and this may be related to changes in diet during evolution. 相似文献
7.
The jaw lever system in ungulates: a new model 总被引:6,自引:0,他引:6
W. S. Greaves 《Journal of Zoology》1978,184(2):271-285
In ungulates the distance from the jaw joint to the last molar is approximately the same as that of the grinding tooth row length. An hypothesis is presented that attempts to explain why ungulate grinding teeth are positioned where they are along the jaw. If the jaw joint on the balancing side serves as the fulcrum in anisognathus animals, a region along the jaw is defined, corresponding to where teeth are actually found, where rather simple muscle action can apply equal forces at any point. The ability to produce the same force at any point in this region, as such, may not be the critical feature since anterior or posterior to this region, tooth placement produces either a relatively inefficient or an unstable condition. 相似文献
8.
J A Kieser H T Groeneveld 《Folia primatologica; international journal of primatology》1987,48(3-4):151-163
Adult static intraspecific allometry of jaw size and tooth area was evaluated in a sample of 104 Papio ursinus crania (52 male, 52 female). Tooth areas were calculated from mesiodistal and buccolingual measurements of all the teeth in both arcades and were scaled to four viscerocranial measurements: bimaxillary width, maxillo-alveolar length, mandibular length and bigonial width. Craniodental allometric analyses indicate that larger animals will tend to have proportionately shorter and narrower lower jaws. From the log-transformed interspecific analyses between P. ursinus and C. aethiops we conclude that males and females within each species share a common exponential value for jaw length. Hence increased sexual dimorphism for muzzle length in P. ursinus is attributable to increased divergence between the male and female slopes. Post-canine area was found to be significantly correlated to maxillary length and to canine size only in females, with exponential values similar to those reported for the same bivariate regressions in C. aethiops. A hypothesis of nutritional equivalence is advanced to account for these observations. Canine base area and the area of P3 were the only tooth areas that scaled in a positively allometric fashion to jaw size--but only in males. Hence the existence of a canine complex is confirmed in the male Chacma baboon, the size of which is related to jaw length. 相似文献
9.
Taylor AB 《Journal of human evolution》2005,48(6):555-574
A number of researchers have suggested a functional relationship between dietary variation and temporomandibular joint (TMJ) morphology, yet few studies have evaluated TMJ form in the African apes. In this study, I compare TMJ morphology in adults and during ontogeny in Gorilla (G.g. beringei, G.g. graueri, and G.g. gorilla) and Pan (P. paniscus, P. troglodytes troglodytes, P.t. schweinfurthii, and P.t. verus). I test two hypotheses: first, compared to all other African apes, G.g. beringei exhibits TMJ morphologies that would be predicted for a primate that consumes a diet comprised primarily of moderately to very tough, leafy vegetation; and second, all gorillas exhibit the same predicted morphologies compared to Pan. Compared to all adult African apes, G.g. beringei has higher rami and condyles positioned further above the occlusal plane of the mandible, relative to jaw length. Thus, mountain gorillas have the potential to generate relatively more muscle force, more evenly distribute occlusal forces along the postcanine teeth, and generate relatively greater jaw adductor moment. G.g. beringei also exhibits relatively wider mandibular condyles, suggesting these folivorous apes are able to resist relatively greater compressive loads along the lateral and/or medial aspect of the condyle. All gorillas likewise exhibit these same shape differences compared to Pan. These morphological responses are the predicted consequences of intensification of folivory and, as such, provide support for functional hypotheses linking these TMJ morphologies to degree of folivory. The African apes to not, however, demonstrate a systematic pattern of divergence in relative condylar area as a function of intensification of folivory. The ontogenetic trajectories for gorillas are significantly elevated above those of Pan, and to a lesser but still significant degree, mountain gorillas similarly deviate from lowland gorillas (G.g. gorilla and G.g. graueri). Thus, adult shape differences in ramal and condylar heights do not result from the simple extrapolation of common growth allometries relative to jaw length. As such, they are suggestive of an adaptive shift towards a tougher, more folivorous diet. However, the allometric patterning for condylar area and condylar width does not systematically conform to predictions based on dietary specialization. Thus, while differences in condylar shapes may confer functional advantages both during growth and as adults, there is no evidence to suggest selection for altered condylar proportions, independent of the effects of changes in jaw size. 相似文献
10.
The effects of changing the direction of the bite force and of the mandibular joint reaction have been studied with a mathematical model assisted by a computer using the technique of linear programming. We conclude the following: In the sagittal plane the long axes of lower molars are each tilted in the direction that most efficiently converts muscle force into work at the bite point rather than in the direction that would maximize static bite force. These genetically determined angles are referred to as the most 'work efficient' angles. Collectively they lead to the appearance of the curve of Spee associated with the postcanines. Given the most work efficient angle of the first molar, the model indicates for bite forces generated in this direction the joint reaction is least when tilted forward from the vertical at between 20 degrees and 30 degrees. The joint reaction is normal to the articular surface of the condyle which is itself tilted forward 20-30 degrees from the occlusal plane. We conclude the condyle and articular eminence are remodelled to the angle that minimizes the joint reaction. The direction of the bite force may be controlled via neuronal circuitry connecting mechanoreceptors of the periodontal ligament with motor nerves supplying the jaw-closing muscles. The height of the occlusal plane in the molar region has little effect on jaw efficiency. 相似文献
11.
Morphology, occlusal surface topography, macrowear, and microwear features of parrotfish pharyngeal teeth were investigated to relate microstructural characteristics to the function of the pharyngeal mill using scanning electron microscopy of whole and sectioned pharyngeal jaws and teeth. Pharyngeal tooth migration is anterior in the lower jaw (fifth ceratobranchial) and posterior in the upper jaw (paired third pharyngobranchials), making the interaction of occlusal surfaces and wear-generating forces complex. The extent of wear can be used to define three regions through which teeth migrate: a region containing newly erupted teeth showing little or no wear; a midregion in which the apical enameloid is swiftly worn; and a region containing teeth with only basal enameloid remaining, which shows low to moderate wear. The shape of the occlusal surface alters as the teeth progress along the pharyngeal jaw, generating conditions that appear suited to the reduction of coral particles. It is likely that the interaction between these particles and algal cells during the process of the rendering of the former is responsible for the rupture of the latter, with the consequent liberation of cell contents from which parrotfish obtain their nutrients. 相似文献
12.
大熊猫(Ailuropoda melanoleuca)是国家一级保护动物,被誉为国宝.牙齿作为大熊猫消化器官之一,相对于其他动物而言,大熊猫牙齿有其自身的构造特点.以往学者和专家对大熊猫牙齿形态的研究侧重于为大熊猫的种群分类寻找根据(Dvadi,1869; Milne-Edwards,1870;王将克,1974),更多关注牙齿在大熊猫进化、演变过程中的意义(王令红等,1982;黄万波,1993).研究的齿位大多局限于臼齿(张鹤宇和刘理,1959),所得结果或数据并不详细和全面.此外,还有一些学者对大熊猫牙齿釉质的超微组织结构进行研究(赵资奎等,1984 ). 相似文献
13.
The association between mandibular robusticity, postcanine megadontia, and canine reduction in hominins has led to speculation that large and robust jaws might be required to spatially accommodate large canine and molar teeth in hominins and other primates. If so, then variations in mandibular form that are generally regarded as biomechanical adaptations to masticatory demands might instead be incidental effects of functional requirements of tooth support. While the association between large teeth and deep, robust jaws in hominins is well known, the relationship between tooth size and jaw size has not been systematically evaluated in a comparative sample of primates. We evaluate the relationships between molar tooth size, canine tooth size, and mandibular corpus and symphyseal dimensions in a sample of adult anthropoids in interspecific (n=84 species) and intraspecific (n=36 species) contexts. For intraspecific comparisons, tooth size and jaw size are correlated, but for a majority of species this is a function of sexual size dimorphism. Interspecific comparisons lend little direct support to the hypothesis that jaw breadth directly covaries with molar tooth breadth, but they do support the hypothesis that mandibular depth is associated with canine tooth size in males. The latter observation suggests that if there is a causal association between canine size and mandibular depth, it is subject to a threshold effect. In contrast, neither corpus nor symphyseal robusticity, measured as a shape index of breadth/height, are correlated with tooth size. Our results suggest that further studies of the relationship between tooth size and corpus morphology should focus on tooth root size and corpus bony architecture, and that species-specific factors should have a strong impact on such relationships. 相似文献
14.
J. W. Osborn 《American journal of physical anthropology》1982,57(3):273-281
A helicoidal plane of postcanine occlusion has been patchily reported in many recent and fossil dentitions of man, and has been suggested as a taxonomic marker distinguishing between the dentitions of Homo and Australopithecines. The present paper describes the helicoidal plane in 19 out of 23 modern human (probably Indian) worn dentitions, in both gracile and robust Australopithecines and in extant anthropoids. It is suggested that tooth wear converts the plane of occlusion present in little-worn teeth, the Monson curve, into a helicoidal plane when 1) the diet is more abrasive, 2) the enamel is thinner and less abrasion resistant, and 3) a longer time separates the eruption of the three molar teeth in a jaw quadrant. A model demonstrates that during the power stroke of a chewing cycle the working side molars move in much the same direction whether the molar occlusal plan follows a Monson curve or a helicoidal plane. The difference is that in the former case the three molars work at the same time while in the latter case they work in sequence from anterior to posterior, thereby concentrating force on one tooth at a time. Because the occlusal plane changes during the life of individuals consuming an abrasive diet, the condition of most anthropoids and hominids, it is argued that the Monson curve has functional significance not because of its influence on occlusal relations and/or jaw movement but because the molar teeth are embedded in bone roughly perpendicular to it, a direction which resists tilting of the teeth during mastication. It is concluded that the helicoidal plane probably has little if any value as a taxonomic marker. 相似文献
15.
doi: 10.1111/j.1741‐2358.2011.00596.x Postural stability and occlusal status among Japanese elderly Background: There are still no data available on the relationship between postural stability and occlusal status among the elderly. Objectives: To examine relationships between postural stability and occlusal status through a cohort study among elderly Japanese. Method: Oral examination, occlusal status, postural stability and a questionnaire were conducted and given to 87 community‐dwelling Japanese at enrolment. Results: The average occlusal pressure of the female group was statistically higher than the male group while average occlusal pressure and postural stability length were lesser in the group with more remaining teeth. Postural stability area and number of remaining teeth showed statistically significant correlations. Postural stability length was lesser in the group with strong occlusal force. Furthermore, the number of decayed teeth was fewer in the good hygiene group. Conclusions: This study identified a close relationship between occlusal status and postural stability of Japanese older individuals. Occlusal hypofunction was observed more in those with occlusal problems, and a decrease in their occlusal functions resulted in postural instability. 相似文献
16.
17.
The teeth of white-spotted bamboo sharks (Chiloscyllium plagiosum) are used to clutch soft-bodied prey and crush hard prey; however, the dual function is not evident from tooth morphology alone. Teeth exhibit characteristics that are in agreement with a clutching-type tooth morphology that is well suited for grasping and holding soft-bodied prey, but not for crushing hard prey. The dual role of this single tooth morphology is facilitated by features of the dental ligament and jaw joint. Tooth attachment is flexible and elastic, allowing movement in both sagittal and frontal planes. During prey capture spike-like tooth cusps pierce the flesh of soft prey, thereby preventing escape. When processing prey harder than the teeth can pierce the teeth passively depress, rotating inward towards the oral cavity such that the broader labial faces of the teeth are nearly parallel to the surface of the jaws and form a crushing surface. Movement into the depressed position increases the tooth surface area contacting prey and decreases the total stress applied to the tooth, thereby decreasing the risk of structural failure. This action is aided by a jaw joint that is ventrally offset from the occlusal planes of the jaws. The offset joint position allows many teeth to contact prey simultaneously and orients force vectors at contact points between the jaws and prey in a manner that shears or rolls prey between the jaws during a bite, thus, aiding in processing while reducing forward slip of hard prey from the mouth. Together the teeth, dental ligament, and jaws form an integrated system that may be beneficial to the feeding ecology of C. plagiosum, allowing for a diet that includes prey of varying hardness and elusiveness. 相似文献
18.
M. R. Zingeser 《American journal of physical anthropology》1976,45(2):317-330
Correlations between dental morphology, arch configuration, and jaw movement patterns were quantitatively investigated in 23 ceboid species to elucidate integrative aspects of occlusal functional anatomy in an adaptive and evolutionary context. Differential maxillary-mandibular arch widths are primary in guiding lateral jaw movements. These movements are characterized according to their associated condylar shifts as either predominantly translatory or rotational. Predominantly translatory movements result from peripheral contact relationships between maxillary arches which are considerably wider posteriorly than their opposing mandibular arches. The greatest degree of mandibular movement is in the molar region in functional association with wide “primitive” maxillary molars, narrow mandibular molars, constricted maxillary intercanine widths, and narrow maxillary incisors. In contrast, predominantly rotational masticatory jaw movements result from differential arch widths which are greatest in the maxillary canine and incisor regions. Here most jaw movement is in the anterior segment and this is reflected in small maxillary-mandibular molar width differences, a high degree of premolarization, wide-set maxillary canine teeth, and wide maxillary incisors. Possible selectional factors in the putative evolution of rotational predominance in mastication from the more primitive translatory pattern are discussed. 相似文献
19.
In 1974, an incomplete human mandible was discovered in the site of Montgaudier Cave, along the Tardoire (Charente), France. The mandible was found in association with stone tools and animal bones in geological deposits referable to the very end of the Middle Pleistocene or the beginning of the Upper Pleistocene. The mandible preserves much of the anterior part of the body and three permanent teeth: left lateral incisor, canine and first molar. Estimates based on tooth eruption of modern humans, as well as occlusal wear and root development, suggest an age at death of between 12.5 and 14.5 years. Morphologically, the fossil possesses features, such as a lack of a chin and multiple mental foramina, which have been observed on immature Neanderthal mandibular specimens from Europe. Comparison with these immature European Neanderthals indicates that the jaw and teeth of the Montgaudier mandible are small for its chronological age, suggesting it was that of a female. Am J Phys Anthropol 103:507–527, 1997 © 1997 Wiley-Liss, Inc. 相似文献
20.
The aim of this study was to examine the change in the occlusal plane inclination that takes place during craniofacial growth relative to various facio-cranial reference lines, as well as to find possible differences in means between sexes, to determine if there were correlations among variables, and to find out which of the parameters were the most reliable in determining the occlusal plane inclination. The investigation was carried out on 192 lateral radiographs of subjects divided into five age groups. The radiographs were traced and six angular roentgencephalometric variables were analysed by using different reference lines: cranial base (OLNS), Frankfort horizontal (OLFH), maxillary base (OLPL), mandibular base (OLML), anterior face height (OLNM) and posterior face height (OLSGO). It could be concluded that the change in occlusal plane inclination shows anterior rotation (left profile) during growth. The most significant change of the occlusal plane inclination was found using variables OLPL, OLFH and OLNS. There were no significant differences according to sex. Small but significant correlations were found between all investigated variables, except OLML. 相似文献