The anchorage mechanics of deep rooted larch, Larix europea L. japonica

The anchorage of deep rooted 16-year-old larch trees, Larixeuropea japonica, has been studied by combining winching testswith analyses of strain around the base of the trunk and rootsystem and mechanical tests on individual roots. These showedthat anchorage is provided by the laterals which emerge fromaround the stem base, sinker roots which emerge along theirlength, and tap roots positioned directly underneath the bole.During anchorage failure the leeward laterals are bent and eventuallybreak close to their base, whilst the windward laterals arepulled out of the ground, with their sinker roots intact. Afterinitially being confined by the soil and bending, the tap rootrotates in the soil. Anchorage failure is similar when the soilis dry as when it is wet, but failure occurs closer to the trunk.Strain measurements along the lateral roots revealed that thestresses were highest close to the trunk and that these regionsof the roots contribute most to tree stability. The two major components of anchorage were found to be the resistanceof leeward laterals to bending and the resistance of tap rootsand windward sinkers to uprooting. Bending tests on leewardlaterals revealed that they provide around 25% of tree anchorage.Almost 75% of the anchorage strength must, therefore, be providedby the windward sinkers and tap roots. Anchorage strength ofroots was positively correlated to their cross-sectional area.The vertical orientation of the sinkers makes the anchoragesystem of larch more efficient than the plate system formedby Sitka spruce on waterlogged soils and means that no root-soilplate is formed. Key words: Anchorage, root architecture, sinker roots, root bending strength, windthrow     

Is it possible to manipulate root anchorage in young trees?

The optimal root system architecture for increased tree anchorage has not yet been determined and in particular, the role of the tap root remains elusive. In Maritime pine (Pinus pinaster Ait.), tap roots may play an important role in anchoring young trees, but in adult trees, their growth is often impeded by the presence of a hard pan layer in the soil and the tap root becomes a minor component of tree anchorage. To understand better the role of the tap root in young trees, we grew cuttings (no tap root present) and seedlings where the tap root had (?) or had not (+) been pruned, in the field for 7 years. The force (F) necessary to deflect the stem sideways was then measured and divided by stem cross-sectional area (CSA), giving a parameter analogous to stress during bending. Root systems were extracted and root architecture and wood mechanical properties (density and longitudinal modulus of elasticity, E _L ) determined. In seedlings (?) tap roots, new roots had regenerated where the tap root had been pruned, whereas in cuttings, one or two lateral roots had grown downwards and acted as tap roots. Cuttings had significantly less lateral roots than the other treatments, but those near the soil surface were 14% and 23% thicker than plants (+) and (?) tap roots, respectively. Cuttings were smaller than seedlings, but were not relatively less resistant to stem deflection, probably because the thicker lateral roots compensated for their lower number. Apart from stem volume which was greater in trees (+) tap roots, no significant differences with regard to size or any root system variable were found in plants (?) or (+) tap roots. In all treatments, lateral roots were structurally reinforced through extra growth along the direction of the prevailing wind, which also improved tap root anchorage. Predictors of log F/CSA differed depending on treatment: in trees (?) tap roots, a combination of the predictors stem taper and %volume allocated to deep roots was highly regressed with log F/CSA (R ² = 0.83), unlike plants (+) tap roots where the combined predictors of lateral root number and root depth were best regressed with log F/CSA (R ² = 0.80). In cuttings, no clear relationships between log F/CSA and any parameter could be found. Wood density and E _L did not differ between roots, but did diminish with increasing distance from the stem in lateral roots. E _L was significantly lower in lateral roots from cuttings. Results showed that nursery techniques influence plant development but that the architectural pattern of Maritime pine root systems is stable, developing a sinker root system even when grown from cuttings. Anchorage is affected but the consequences for the long-term are still not known. Numerical modelling may be the only viable method to investigate the function that each root plays in adult tree anchorage.     

Strain distribution during anchorage failure of Pinus pinaster Ait. at different ages and tree growth response to wind-induced root movement

Winching tests were carried out on 5- 13- and 17-year-old tap rooted Maritime pine (Pinus pinaster Ait.) in order to determine how the mode of anchorage failure changes throughout the life of a tree. As trees were pulled sideways, strain along the lateral roots was recorded using strain gauges attached to a strain indicator. Measurements of strain in the root system, taken during winching, provide information about root movement when loaded by wind. The mode of mechanical failure appeared to depend on tree age. The youngest trees bent over completely during winching, but did not break due to the plasticity of their trunks. The 13-year-old trees either broke at the base of the tree (due to the presence of grafting scar tissue) or at the base of the tap-root. The oldest trees broke at the base of the tap-root and sounds of roots breaking were also heard. Strain was twice as great in the trunk compared to the roots in the 5- and 13-year-old trees and was three times greater in the compression roots of 17-year–old trees compared to that in the trunk. In one 17-year-old tree, strain was found to increase at a distance of 35 cm in tension roots before decreasing again. Although the mode of failure changed with tree size, anchorage strength increased proportionally with the third power of trunk diameter, therefore another reason why failure differs with tree age must exist. In order to determine if different types of wood were being laid down in the lateral roots in response to wind loading, maturation strains, indicating the existence of mechanical stress in developing wood cells, were measured at different points along the roots. A high correlation was found between maturation strain and strain measured during winching, in roots that lay in the wind direction only. Therefore, trees appear to be able to respond to external loading stress, even at a local level within a root. This revised version was published online in June 2006 with corrections to the Cover Date.     

Root architecture and tree stability

Summary Root anchorage is discussed with a view to determining the optimum use of root material for enhanced stability. Field observations were made on Sitka spruce root systems while lateral forces were applied to the stem with a winch to pull the tree over. Measurements included the applied force, angles of inclination, soil and root movement, timing of the sound of root breakage using buried microphones, weight and shape of the root-soil plate and damage to the roots.Components of anchorage include the dimensions and mass of the root-soil plate levered from the ground by the displaced stem, and tensile strength of roots and soil beneath the plate; root and soil tensile strength and root/soil resistance on the windward perimeter; and on the lee side the stiffness of the hinge at the fulcrum.Strength properties of roots and soil are reviewed. Models devised for landslip are extended to consider behaviour under tension, of roots singly and in groups, and the concept is developed of a critical rooting density at which root/soil resistance exceeds soil strength, giving rise to the characteric root-soil plate on uprooted trees. The lee side part of the root-soil plate acts as a cantilevered beam and determines the distance of the fulcrum from the tree. Physical laws defining the reduced stiffness of beams as a result of subdivision, indicate the importance of the number/size distribution of roots and weakening effects of branching.On the windward side upward movement of the root-soil plate causes sequential breakage of soil and roots. Under an increasing applied load, failure occurs in parts of the soil-root system before the maximum force for uprooting is achieved. A preliminary approach is made to modelling where the changing contributions of the components of anchorage are allowed for throughout the uprooting process.     

Understanding the impact of root morphology on overturning mechanisms: a modelling approach

BACKGROUND AND AIMS: The Finite Element Method (FEM) has been used in recent years to simulate overturning processes in trees. This study aimed at using FEM to determine the role of individual roots in tree anchorage with regard to different rooting patterns, and to estimate stress distribution in the soil and roots during overturning. METHODS: The FEM was used to carry out 2-D simulations of tree uprooting in saturated soft clay and loamy sand-like soil. The anchorage model consisted of a root system embedded in a soil block. Two root patterns were used and individual roots removed to determine their contribution to anchorage. KEY RESULTS: In clay-like soil the size of the root-soil plate formed during overturning was defined by the longest roots. Consequently, all other roots localized within this plate had no influence on anchorage strength. In sand-like soil, removing individual root elements altered anchorage resistance. This result was due to a modification of the shape and size of the root-soil plate, as well as the location of the rotation axis. The tap root and deeper roots had more influence on overturning resistance in sand-like soil compared with clay-like soil. Mechanical stresses were higher in the most superficial roots and also in leeward roots in sand-like soil. The relative difference in stresses between the upper and lower sides of lateral roots was sensitive to root insertion angle. Assuming that root eccentricity is a response to mechanical stresses, these results explain why eccentricity differs depending on root architecture. CONCLUSIONS: A simple 2-D Finite Element model was developed to better understand the mechanisms involved during tree overturning. It has been shown how root system morphology and soil mechanical properties can modify the shape of the root plate slip surface as well as the position of the rotation axis, which are major components of tree anchorage.     

Variations in maturation strains and root shape in root systems of Maritime pine (Pinus pinaster Ait.)

 In order to determine if different types of wood were being laid down in the root system of Maritime pine (Pinus pinaster Ait), in response to wind loading, longitudinal residual maturation strains (LRMS), indicating the existence of mechanical stress in developing wood cells, were measured in the trunk and lateral roots. Two age groups of trees (5- and 13-year- old) were compared. LRMS were greater in the trunk and roots of 13-year-old trees than in 5-year-old trees. This phenomenon may be due to increased competition between older trees. LRMS in leeward roots of both age-groups were positive i.e. the wood cells had developed under compression, as also occurs in reaction wood of gymnosperms. As leeward roots are placed under compression during tree sway, an abnormal type of wood may form in the roots in order to counteract the increased stress. In other roots, the strains were negative i.e. the cells had developed under tension, as occurs in normal wood. In the roots of younger trees, LRMS were also positive nearer the stem, thus indicating that wood formation may also be influenced by bending stresses experienced in this zone. In addition to LRMS measurements, radial growth in roots was examined in order to determine the influence of mechanical loading on secondary growth. In older trees, there was a significant increase of 34% in woody growth below the biological centre, compared to that above. This eccentricity is unlike that found in most other tree species, where secondary growth is usually greater on the upper side of the root. However, Maritime pine has a tap root, which will alter the pattern of stress within the root system. Under wind loading, a concentration of mechanical stress will develop at the bases of the stem, lateral roots and tap root. Received: 7 July 1997 / Accepted: 11 December 1997     

Growth and morphology of eucalypt seedling-roots, in relation to soil strength arising from compaction

Information on the response of root growth and morphology to soil strength is useful for testing suitability of existing and new tillage methods and/or for selecting plants suitable for a specific site with or without tillage. Although there is extensive published information on the root growth-soil strength relationships for annual agricultural plants, such information is scarce for woody, perennial tree species. The purpose of this study is to examine growth and morphology of the root systems of 17-day-old eucalypt seedlings with respect to variation in soil strength. Soil strength in this study was varied by compaction of a well-aggregated clay soil to bulk densities of 0.7–1.0 Mg m^-3 whilst maintaining adequate water availability and aeration for plant growth. Lengths and tip-diameters of primary and lateral roots were measured on the excavated root systems of seedlings.With increase in bulk density and also soil strength (expressed as penetrometer resistance), total length of primary and lateral roots decreased. There were 71 and 31% reduction in the lengths of primary and lateral roots respectively with an increase in penetrometer resistance from 0.4 to 4.2 MPa. This indicated primary roots to be more sensitive to high soil strength than the lateral roots. Average length of lateral roots and diameters of both primary and lateral root tips increased with an increase in soil strength as well. There was greater abundance of lateral roots (no. of lateral roots per unit length of primary root) and root hairs with increased soil strength. The observed root behaviour to variable soil strength is discussed in the context of compensatory growth of roots and overall growth of plants.     

Modelling root structure and stability

Summary Seven fully excavated 16 year-old root systems of Sitka spruce were analysed. All roots in excess of 1 cm diameter at their origin on the stumps were analysed, data being collected until root diameter declined to less than 0.5 cm.Root morphology and distribution was identified as a balance between systematic biological mechanisms and their disruption by environmental factors, particularly changes of soil density and soil surface contours. The biological mechanisms have been modelled and the model is capable of simulating root systems in response to a few simple input variablese.g. the number of roots originating at stumps, stem ratius, total number of roots of all ordersetc.Additionally equations have been developed to estimate the distribution of root diameter, and root weight at all distances from tree stems and a similar equation permits the estimation of tree diameter at chosen heights. These latter estimates being utilized to calculate the turning moment of stems when blown by the wind.The influence of the wind on turning moment is explored for simulated root systems of differing strength and gross morphology.     

Changes in hydraulic conductivity, mechanical properties, and density reflecting the fall in strain along the lateral roots of two species of tropical trees

Roots have been described as having larger vessels and so greater hydraulic efficiency than the stem. Differences in the strength and stiffness of the tissue within the root system itself are thought to be an adaptation to the loading conditions experienced by the roots and to be related to differences in density. It is not known how potential mechanical adaptations may affect the hydraulic properties of the roots. The change in strength, stiffness, conductivity, density, sapwood area, and second moment of area distally along the lateral roots of two tropical tree species in which the strain is known to decrease rapidly was studied and the values were compared with those of the trunk. It was found that as the strain fell distally along the roots, so did the strength and stiffness of the tissue, whereas the conductivity increased exponentially. These changes appeared to be related to differences in density. In contrast to the distal-most roots, the tissue of the proximal roots had a lower conductivity and higher strength than that of the trunk. This suggests that mechanical requirements on the structure rather than the water potential gradient from roots to branches are responsible for the general pattern that roots have larger vessels than the stem. In spite of their increased transectional area, the buttressed proximal roots were subjected to higher levels of stress and had a lower total conductivity than the rest of the root system.     

A Numerical Investigation into the Influence of Soil Type and Root Architecture on Tree Anchorage

The influence of root morphology and soil type on the mechanical behaviour of tree anchorage was investigated through numerical modelling. We developed a simple computer program to construct three-dimensional virtual root architectural patterns. This tool was used to build four schematic patterns: heart-, tap-, herringbone- and plate-like root systems. Each of these rooting types was characterized by specific branching characteristics. However, the total volume (proportional to the wood biomass) and material properties were kept constant. The finite element method was used to calculate the mechanical response of root/soil systems when the stem was subjected to bending forces. The overturning resistance of the four schematic root patterns was determined in four different idealistic soil types. These soils were based on Mohr–Coulomb plasticity models. Results showed that soil internal friction modified the position of the rotation axis during tilting of the root/soil plate. Rooting depth was a determinant parameter in sandy-like soils. Overturning resistance was greatest in heart- and tap-root systems whatever the soil type. However, the heart root system was more resistant on clay-like soil whereas the tap root system was more resistant on sandy-like soil. Herringbone and plate root systems were twice as less resistant on clay soils and 1.5 times less resistant on sandy soils when compared to heart and tap-like structures.     

Root system development of Larix gmelinii trees affected by micro-scale conditions of permafrost soils in central Siberia

Spatial distributions of root systems of Larix gmelinii (Rupr.) Rupr. trees were examined in two stands in central Siberia: an even-aged stand (ca. 100 yrs-old) and a mature, uneven-aged (240–280 yrs-old) stand. Five larch trees of different sizes were sampled by excavating coarse roots (diameter > 5 mm) in each stand. Dimensions and ages of all first-order lateral roots were measured. Micro-scale conditions of soil temperature and soil water suction (each 10 cm deep) were also examined in relation to earth hummock topography (mound vs. trough) and/or ground floor vegetation types (moss vs. lichens). All larch trees developed superficial root systems, consisting of the aborted short tap root (10–40 cm in soil depth) and some well-spread lateral roots (n= 4-13). The root network of each tree was asymmetric, and its rooting area reached about four times the crown projection area. Lateral roots generally expanded into the upper soil layers of the mounds where summer soil temperature was 1–6°C higher than inside nearby troughs. Chronological analysis indicated that lateral root expansion started successively from lower to upper parts of each aborted tap root, and some lateral roots occurred simultaneously at several decades after tree establishment. The process of root system development was likely to be primarily linked with post-fire dynamics of rhizosphere environment of the permafrost soils.     

Lateral root formation in pine seedlings

The role of assimilates in lateral root development was studied in Pinus pinea seedlings grown in a nutrient solution. Seedlings were treated with ¹⁴CO₂ for 2 h following removal of the tap root tip at various times prior to the application of ¹⁴CO₂ or removal of a different number of cotyledons at one time. In seedlings with intact root systems most of the radioactivity accumulated in the lower section of the root containing the tap root apex. When the tap root tip was removed, the pattern of radioactivity accumulation along the root was affected by the presence and the stage of lateral root development. Removing the tap root tip of young seedlings (with no lateral roots) resulted in an almost equal distribution of radioactivity along the root. About 50% of the total radioactivity was found in the section showing the highest lateral root growth. Removing the tap root tip of mature seedlings (with lateral roots in the upper section) resulted in an immediate increase in the radioactivity accumulation in the upper section. When lateral roots appeared in the middle section, the pattern of radioactivity distribution was similar to that found in root decapitated young seedlings. Removal of cotyledons of mature seedlings somewhat increased the transport of radioactivity to the lower root section at the expense of the radioactivity in the lateral roots of the upper section. The present study suggests that competition within the root system between the tap root apex and the lateral roots may play an important role in determining the morphology of the root system.     

Influence of wind loading on root system development and architecture in oak (Quercus robur L.) seedlings.

The effect of wind loading on seedlings of English oak (Quercus robur L.) was investigated. Instead of using a traditional wind tunnel, an innovative ventilation system was designed. This device was set up in the field and composed of a rotating arm supporting an electrical fan, which emitted an air current similar to that of wind loading. Oaks were sown from seed in a circle around the device. A block of control plants was situated nearby, and was not subjected to artificial wind loading. After 7 months, 16 plants from each treatment were excavated, and root architecture and morphological characteristics measured using a 3D digitiser. The resulting geometrical and topological data were then analysed using AMAPmod software. Results showed that total lateral root number and length in wind stressed plants were over two times greater than that in control trees. However, total lateral root volume did not differ significantly between treatments. In comparing lateral root characters between the two populations, it was found that mean root length, diameter and volume were similar between the two treatments. In trees subjected to wind loading, an accentuated asymmetry of root distribution and mean root length was found between the windward and leeward sides of the root system, with windward roots being significantly more numerous and longer than leeward roots. However, no differences were found when the two sectors perpendicular to the wind direction were compared. Mean tap root length was significantly higher in control samples compared to wind stressed plants, whilst mean diameter was greater in the latter. Wind loading appears to result in increased growth of lateral roots at the expense of the tap root. Development of the lateral root system may therefore ensure better anchorage of young trees subjected to wind loading under certain conditions.     

Ongoing modifications to root system architecture of Pinus ponderosa growing on a sloped site revealed by tree-ring analysis

Our knowledge of the root system architecture of trees is still incomplete, especially concerning how biomass partitioning is regulated to achieve an optimal, but often unequal, distribution of resources. In addition, our comprehension of root system architecture development as a result of the adaptation process is limited because most studies lack a temporal approach. To add to our understanding, we excavated 32-year-old Pinus ponderosa trees from a steep, forested site in northern Idaho USA. The root systems were discretized by a low magnetic field digitizer and along with AMAPmod software we examined their root traits (i.e. order category, topology, growth direction length, and volume) in four quadrants: downslope, upslope, windward, and leeward. On one tree, we analyzed tree rings to compare the ages of lateral roots relative to their parental root, and to assess the occurrence of compression wood. We found that, from their onset, first-order lateral roots have similar patterns of ring eccentricity suggesting an innate ability to respond to different mechanical forces; more root system was allocated downslope and to the windward quadrant. In addition, we noted that shallow roots, which all presented compression wood, appear to be the most important component of anchorage. Finally, we observed that lateral roots can change growth direction in response to mechanical forces, as well as produce new lateral roots at any development stage and wherever along their axis. These findings suggest that trees adjust their root spatial deployment in response to environmental conditions, these roots form compression wood to dissipate mechanical forces, and new lateral roots can arise anywhere and at any time on the existing system in apparent response to mechanical forces.     

Architectural Tradeoffs between Adventitious and Basal Roots for Phosphorus Acquisition

Adventitious rooting contributes to efficient phosphorus acquisition by enhancing topsoil foraging. However, metabolic investment in adventitious roots may retard the development of other root classes such as basal roots, which are also important for phosphorus acquisition. In this study we quantitatively assessed the potential effects of adventitious rooting on basal root growth and whole plant phosphorus acquisition in young bean plants. The geometric simulation model SimRoot was used to dynamically model root systems with varying architecture and C availability growing for 21 days at 3 planting depths in 3 soil types with contrasting nutrient mobility. Simulated root architectures, tradeoffs between adventitious and basal root growth, and phosphorus acquisition were validated with empirical measurements. Phosphorus acquisition and phosphorus acquisition efficiency (defined as mol phosphorus acquired per mol C allocated to roots) were estimated for plants growing in soil in which phosphorus availability was uniform with depth or was greatest in the topsoil, as occurs in most natural soils. Phosphorus acquisition and acquisition efficiency increased with increasing allocation to adventitious roots in stratified soil, due to increased phosphorus depletion of surface soil. In uniform soil, increased adventitious rooting decreased phosphorus acquisition by reducing the growth of lateral roots arising from the tap root and basal roots. The benefit of adventitious roots for phosphorus acquisition was dependent on the specific respiration rate of adventitious roots as well as on whether overall C allocation to root growth was increased, as occurs in plants under phosphorus stress, or was lower, as observed in unstressed plants. In stratified soil, adventitious rooting reduced the growth of tap and basal lateral roots, yet phosphorus acquisition increased by up to 10% when total C allocation to roots was high and adventitious root respiration was similar to that in basal roots. With C allocation to roots decreased by 38%, adventitious roots still increased phosphorus acquisition by 5%. Allocation to adventitious roots enhanced phosphorus acquisition and efficiency as long as the specific respiration of adventitious roots was similar to that of basal roots and less than twice that of tap roots. When adventitious roots were assigned greater specific respiration rates, increased adventitious rooting reduced phosphorus acquisition and efficiency by diverting carbohydrate from other root types. Varying the phosphorus diffusion coefficient to reflect varying mobilities in different soil types had little effect on the value of adventitious rooting for phosphorus acquisition. Adventitious roots benefited plants regardless of basal root growth angle. Seed planting depth only affected phosphorus uptake and efficiency when seed was planted below the high phosphorus surface stratum. Our results confirm the importance of root respiration in nutrient foraging strategies, and demonstrate functional tradeoffs among distinct components of the root system. These results will be useful in developing ideotypes for more nutrient efficient crops.     

The function of buttress roots: a comparative study of the anchorage systems of buttressed (Aglaia and Nephelium ramboutan species) and non-buttressed (Mallotus wrayi) tropical trees

The anchorage mechanics of mature buttressed trees of Aglaiaand Nephelium, and of non-buttressed Mallotus wrayi have beeninvestigated by combining a study of the morphology of theirroot systems with a series of anchorage tests. Both types possessed tap roots, but only buttressed trees possessedsinker roots, which branched from the ends of the buttresses.The anchorage strength of the buttressed trees was almost double(10.6 kNm) that of the unbuttressed ones (4.9 kNm), and themaximum moment was generated at lower angles. In but tressedtrees, the leeward buttresses were pushed into the soil beforebending and eventually breaking towards their tip, whilst thewindward buttresses pulled out of the soil or delaminated ifthey possessed sinker roots. The tap root rotated in the soilto windward. In contrast, during failure of unbuttressed treesthe tap root both moved and bent towards the leeward, the windwardroots were pulled out of the soil, and the leeward lateralssimply buckled. Strains along but tresses were much higher thanalong the laterals of unbuttressed trees. These results suggest that buttresses act in both tension andcompression and make a much larger contribution to anchoragethan the thin laterals of non-buttressed trees. The relativecontribution of the but tresses was determined by carrying outa further series of anchorage tests in which both buttressedand unbuttressed trees were pulled over after all their lateralshad been cut away. These trees were therefore only anchoredby their taproot. Failure of both types was similar to intactunbuttressed trees, and they had similar anchorage strengthstoeach other, 4 kNm, around 80% of the value for intact non-buttressedtrees, but only 40% of the strength of intact buttressed trees.Buttresses therefore contribute around 60% of the anchorageof buttressed trees, producing around six times more anchoragethan the thin laterals of unbuttressed trees. Key words: Anchorage, root architecture, sinker roots, tap roots, root bending strength, buttresses     

An Experimental Investigation of the Resistance of Model Root Systems to Uprooting

The architecture of a tree root system may influence its abilityto withstand uprooting by wind loading. To determine how theroot branching pattern may alter the anchorage efficiency ofa tree, artificial model root systems with different topologiesand branching angles were built. The root systems were embeddedat various depths in wet sand and the pull-out resistance measured.A model to predict the uprooting resistance from the data collectedwas designed, allowing predictions of anchorage strength withregards to architecture. The dominant factors influencing pull-outresistance were the depth and length of roots in the soil. Themost efficient type of branching pattern predicted by the programwas one with an increased number of roots deep in the soil.The optimum branching angle most likely to resist pull-out isa vertical angle of 90° between a lateral and the main axis.The predicted mechanically optimal radial angle between a lateralbranch and its daughter is between 0 and 20°. Values ofbranching angle are compared with those measured in real woodyroot systems of European larch and Sitka spruce. Root architecture; root anchorage; pull-out resistance; windthrow; Picea sitchensis ; Larix decidua     

The Late Triassic Araucarioxylon Arizonicum trees of the Petrified Forest National Park, Arizona, USA

Examination and measurement of many of the trunks attributed to Araucarioxylon arizonicum Knowlton eroded from the Late Triassic Chinle Formation in the Petrified Forest National Park, Arizona demonstrate that the living tree did not closely resemble any of the present-day Araucaria trees of the southern hemisphere as postulated in past reconstructions. The research indicates that it was a tall monopodial tree with branches occurring in a disordered manner on the trunk from the base to the crown. Calculations using the allometric method of Niklas indicate that the trees were of considerable size. The largest recorded trunk has a basal diameter of nearly 3 m and may represent a tree 59 m high, when living. The root system of the A. arizonicum tree consisted of a ring of four to six steeply inclined lateral roots and a massive, vertically directed tap root. Many of the trunks still have their root systems attached, a circumstance that indicates their felling by the cut-bank operations of the local river system. The massive roots of these trunks, particularly the large tap root, are consistent with growth in soft, deep, alluvial soil, and the thin scale bark is to be expected in a tropical climate free from frost.     

The Anchorage of Leek Seedlings: The Effect of Root Length and Soil Strength

The mechanical behaviour of single roots being extracted fromsoil was modelled as a process in which tension is transferredfrom the upper regions of the root to the soil via shear. Quantitativepredictions were made about the extraction forces and the shapeof the uprooting curves, and these were tested using leek radiclesof different lengths in soil of two different strengths. Results of uprooting tests were qualitatively similar to thepredictions. The pullout resistance rose with root length, untilthe breaking strength of the root was reached, at around 30mm: longer roots all broke before the tip was stressed. In wholeroot systems, therefore, failure will occur proximally beforethe line distal roots are mechanically stressed, so these canhave no anchorage function. Resistance to an upward force will be most economically achievedby having many strengthened proximal root axes, as in the adventitiousroot systems of grasses, sedges and stoloniferous dicots. Allium porrum, root, anchorage, shear, tension, soil     

松属、青冈属乔木侧根的强度在防护林固土护坡作用中的意义

 乔木根系的土壤加强作用是防护林稳定土壤和保护坡面的最有效的机械途径,其中侧根的牵引效应在林地的固土护坡过程中具有重要作用,其潜能与侧根的抗张强度呈正相关关系。本研究构建了侧根抗张强度与其牵引效应的数学模型,对云南山地以云南松林和滇青冈林为代表的松属和青冈属乔木群落进行了分析。结果表明：青冈属和松属乔木侧根的抗张强度分别在40一10MPa和30～5 MPa范围内,量值的高低随侧根直径的增加而降低。两种乔木的侧根在0～60cm的土壤深处有较高的分布密度,由于具有一定的强度,通过它们的牵引效应,侧根使这一深度的根际土层的抗张强度提高了6.85～12.41 kPa。在各个土层,青冈属乔木固土护坡能力明显高于松属,说明松属侧根在浅层土体加固方面具有局限性。