Stability of CoQ10-Loaded Oil-in-Water (O/W) Emulsion: Effect of Carrier Oil and Emulsifier Type

Co-enzyme Q10 (CoQ10), a lipophilic compound that widely used in the food and pharmaceutical products was formulated in a κ-carrageenan coated oil-in-water (O/W) emulsion. In this work, we examined the solubility of CoQ10 in different carrier oils and effects of emulsifier type on the formation and stability of CoQ10-loaded O/W emulsion. Nine vegetable oils and four types of emulsifiers were used. CoQ10 was found significantly (p?<?0.05) more soluble in medium chain oils (coconut oil and palm kernel oil) as compared to other vegetable oils. The O/W emulsions were then prepared with 10 % (w/w) coconut oil and palm kernel oil containing 200 g CoQ10/L oil stabilized by 1 % (w/v) emulsifiers (sucrose laurate (SEL), sodium stearoyl lactate (SSL), polyglycerol ester (PE), or Tween 80 (Tw 80)) in 1 % (w/v) κ-carrageenan aqueous solution. Particle size distribution and physical stability of the emulsions were monitored. The droplet sizes (surface weighted mean diameter, D[3,2]) of fresh O/W emulsion in the range of 2.79 to 5.83 μm were observed. Irrespective of the oil used, results indicated that complexes of SSL/κ-carrageenan provided the most stable CoQ10-loaded O/W emulsion with smaller and narrower particle size distribution. Both macroscopic and microscopic observations showed that O/W emulsion stabilized by SSL/κ-carrageenan is the only emulsion that exhibited no sign of coalescence, flocculation, and phase separation throughout the storage period observed.     

Novel preparation method for surfactant-coated enzymes using W/O emulsion

Summary A novel preparation method for surfactant-coated enzymes has been developed using a W/O emulsion. The enzymatic activity of chymotrypsin in isooctane significantly increased with the coating of surfactants. The surfactant-coated chymotrypsin showed a high enzymatic activity for amidation, although powdered chymotrypsin did not show the activity. Further, the coated enzyme showed a remarkably high storage stability.     

Increased plasma O2 solubility improves O2 uptake of in situ dog muscle working maximally.

A perfluorocarbon emulsion [formulation containing 90% wt/vol perflubron (perfluorooctylbromide); Alliance Pharmaceutical] was used to increase O2 solubility in the plasma compartment during hyperoxic low hemoglobin concentration ([Hb]) perfusion of a maximally working dog muscle in situ. Our hypothesis was that the increased plasma O2 solubility would increase the muscle O2 diffusing capacity (DO2) by augmenting the capillary surface area in contact with high [O2]. Oxygen uptake (VO2) was measured in isolated in situ canine gastrocnemius (n = 4) while working for 6 min at a maximal stimulation rate of 1 Hz (isometric tetanic contractions) on three to four separate occasions for each muscle. On each occasion, the last 4 min of the 6-min work period was split into 2 min of a control treatment (only emulsifying agent mixed into blood) and 2 min of perflubron treatment (6 g/kg body wt), reversing the order for each subsequent work bout. Before contractions, the [Hb] of the dog was decreased to 8-9 g/100 ml and arterial PO2 was increased to 500-600 Torr by having the dog breathe 100% O2 to maximize the effect of the perflubron. Muscle blood flow was held constant between the two experimental conditions. Plasma O2 solubility was almost doubled to 0.005 ml O2 x 100 ml blood-1 x Torr-1 by the addition of the perflubron. Muscle O2 delivery and maximal VO2 were significantly improved (at the same blood flow and [Hb]) by 11 and 12.6%, respectively (P < 0.05), during the perflubron treatment compared with the control. O2 extraction by the muscle remained the same between the two treatments, as did the estimate of DO2.(ABSTRACT TRUNCATED AT 250 WORDS)     

Quantification of O6-methyl and O6-ethyl deoxyguanosine adducts in C57BL/6N/Tk+/- mice using LC/MS/MS

The carcinogenicity of many alkylating agents is derived from their ability to form persistent DNA adducts that induce mutations. This paper presents and validates methodology, based on LC with tandem mass spectrometry, for the separate or concurrent quantification by isotope dilution of O(6)-methyl-2'-deoxyguanosine (O(6)Me-dG) and O(6)-ethyl-2'-deoxyguanosine (O(6)Et-dG) DNA adducts. The limits of quantification were estimated to be < or =0.2 adducts/10(8) nucleotides for either adduct. This sensitivity permitted evaluation of adduct levels in livers from separate groups of untreated adult C57BL/6N/Tk(+/-) and C57BL/6N X Sv129 mice (undetectable to 5.5+/-6.7 O(6)Me-dG/10(8) nucleotides; undetectable to 0.04 O(6)Et-dG/10(8) nucleotides). Treatment of adult C57BL/6N/Tk(+/-) mice with equimolar doses (342micromol/kg body weight) of N-methyl-N-nitrosourea and N-ethyl-N-nitrosourea produced adduct levels in liver of 1700+/-80 O(6)Me-dG/10(8) nucleotides and 260+/-60 O(6)Et-dG/10(8) nucleotides, respectively, when assessed 4h after dosing. These methods should be useful for evaluations of DNA adducts in relation to cellular processes that modify carcinogenic and toxicological responses in experimental animals and humans.     

Design and characterization of antitumor drug paclitaxel-loaded chitosan nanoparticles by W/O emulsions

Chitosan nanoparticles and paclitaxel loaded chitosan nanoparticles were prepared by emulsification-crosslinking method in a W/O emulsion system, using glutaraldehyde as crosslinking agent. The mean diameter of chitosan nanoparticles decreased with increase of pH value of the reaction system from 4.5 to 6.5, and increased when the pH exceeded 6.5. Ultraviolet spectrum analysis showed that the largest loading efficiency and encapsulation efficiency could be 8.55% and 94.01%, respectively. In vitro drug release profile was also determined by ultraviolet spectrometry. MTT assays revealed that the blank chitosan nanoparticles had almost none toxicity, and cell culture was carried out accordingly.     

Preparation of a water-in-oil-in-water (W/O/W) type microcapsules by a single-droplet-drying method and change in encapsulation efficiency of a hydrophilic substance during storage

Microcapsules of a water-in-oil-in-water (W/O/W) emulsion, which contained a hydrophilic substance, 1,3,6,8-pyrenetetrasulfonic acid tetrasodium salt (PTSA), in its inner aqueous phase, was prepared by hot-air-drying or freeze-drying the emulsion using a single-droplet-drying method. Pullulan, maltodextrin, or gum arabic was used as a wall material, and the oily phase was tricaprylin, oleic acid, olive oil, or a mixture of tricaprylin and olive oil. An encapsulation efficiency higher than 0.95 was reached except for the microcapsules prepared using gum arabic and oleic acid. The hot-air-dried microcapsules were generally more stable than the freeze-dried microcapsules at 37 degrees C and various relative humidities. The stability was higher for the microcapsules with tricaprylin as the oily phase than for the microcapsules with oleic acid. The higher stability of the microcapsules with tricaprylin would be ascribed to the lower partition coefficient of PTSA to the oily phase. There was a tendency for the stability to be higher at lower relative humidity for both the hot-air- and freeze-dried microcapsules. The volumetric fraction of olive oil in its mixture with tricaprylin did not significantly affect either the encapsulation efficiency or the stability of the hot-air-dried microcapsules.     

Preparation of a Water-in-oil-in-water (W/O/W) Type Microcapsules by a Single-droplet-drying Method and Change in Encapsulation Efficiency of a Hydrophilic Substance during Storage

Microcapsules of a water-in-oil-in-water (W/O/W) emulsion, which contained a hydrophilic substance, 1,3,6,8-pyrenetetrasulfonic acid tetrasodium salt (PTSA), in its inner aqueous phase, was prepared by hot-air-drying or freeze-drying the emulsion using a single-droplet-drying method. Pullulan, maltodextrin, or gum arabic was used as a wall material, and the oily phase was tricaprylin, oleic acid, olive oil, or a mixture of tricaprylin and olive oil. An encapsulation efficiency higher than 0.95 was reached except for the microcapsules prepared using gum arabic and oleic acid. The hot-air-dried microcapsules were generally more stable than the freeze-dried microcapsules at 37°C and various relative humidities. The stability was higher for the microcapsules with tricaprylin as the oily phase than for the microcapsules with oleic acid. The higher stability of the microcapsules with tricaprylin would be ascribed to the lower partition coefficient of PTSA to the oily phase. There was a tendency for the stability to be higher at lower relative humidity for both the hot-air- and freeze-dried microcapsules. The volumetric fraction of olive oil in its mixture with tricaprylin did not significantly affect either the encapsulation efficiency or the stability of the hot-air-dried microcapsules.     

Single-molecule PCR using water-in-oil emulsion

Polymerase chain reaction (PCR) using a single molecule of DNA is very useful for analysis, detection and cloning of the desired DNA fragment. We developed a simple PCR method utilizing a water-in-oil (W/O) emulsion that included numerous droplets of reaction mixture in bulk oil phase. These droplets, which were stable even at high temperatures, functioned as micro-reactors. This allows the effective concentration of template DNA to be increased, even for low concentrations of template DNA. The present method consists of a two-step thermal cycle. The first step was carried out using the W/O emulsion. During this step, the template DNA was amplified in the limited volume of the droplets in the W/O emulsion. The W/O emulsion was broken and the second PCR step was carried out. This method can be easily applied to amplify a single DNA molecule.     

Emission analysis of Tb3+‐and Sm3+‐ion‐doped (Li2O/Na2O/K2O) and (Li2O + Na2O/Li2O + K2O/K2O + Na2O)‐modified borosilicate glasses

Four series of borosilicate glasses modified by alkali oxides and doped with Tb³⁺ and Sm³⁺ ions were prepared using the conventional melt quenching technique, with the chemical composition 74.5B₂O₃ + 10SiO₂ + 5MgO + R + 0.5(Tb₂O₃/Sm₂O₃) [where R = 10(Li₂O /Na₂O/K₂O) for series A and C, and R = 5(Li₂O + Na₂O/Li₂O + K₂O/K₂O + Na₂O) for series B and D]. The X‐ray diffraction (XRD) patterns of all the prepared glasses indicate their amorphous nature. The spectroscopic properties of the prepared glasses were studied by optical absorption analysis, photoluminescence excitation (PLE) and photoluminescence (PL) analysis. A green emission corresponding to the ⁵D₄ → ⁷F₅ (543 nm) transition of the Tb³⁺ ions was registered under excitation at 379 nm for series A and B glasses. The emission spectra of the Sm³⁺ ions with the series C and D glasses showed strong reddish‐orange emission at 600 nm (⁴G_5/2 →⁶H_7/2) with an excitation wavelength λ_exci = 404 nm (⁶H_5/2→⁴F_7/2). Furthermore, the change in the luminescence intensity with the addition of an alkali oxide and combinations of these alkali oxides to borosilicate glasses doped with Tb³⁺ and Sm³⁺ ions was studied to optimize the potential alkali‐oxide‐modified borosilicate glass.     

Water-in-oil emulsions that improve the storage and delivery of the biolarvacide <Emphasis Type="Italic">Lagenidium giganteum</Emphasis>

Lagenidium giganteum is an effective biological control agent for mosquitoes with limited use due to poor survival and contamination during storage. Invert (water-in-oil) emulsions using crop oils were investigated for formulating L. giganteum mycelium for improved shelf life and delivery. Cells formulated in a water-in-oil (W/O) emulsion were just as effective against larvae as those formulated in aqueous suspension. Cells formulated in the W/O emulsion and cell suspension settled during storage and formed clumps, which significantly reduced the efficacy of formulations. Hydrophobic silica nanoparticles were added to the W/O emulsion formulation for oil thickening. The addition of silica significantly reduced cell sedimentation and improved storage; thickened W/O emulsions with an initial cell density of 3900 CFU/mg applied at 0.5 mg/cm² were greater than 95% effective at infecting mosquitoes after 12 weeks of storage at room temperature. Cell density reduction during storage was represented using first-order kinetics. Surface treatment of silica nanoparticles and oil refinement both had a significant effect on the first-order rate constant; as the hydrophobicity of the silica increased and level of oil refinement decreased, the rate constant increased. The percentage of water in the W/O emulsion and type of refined crop oil had no significant effect on the first-order rate constant. Cells formulated in the thickened W/O emulsion were less likely to settle when applied to water compared to cells in aqueous suspension, suggesting better cell distribution in an aqueous environment could be achieved when cells are applied in a W/O emulsion.     

Detection of Escherichia coli serogroups O26, O103, O111 and O145 from bovine faeces using immunomagnetic separation and PCR/DNA probe techniques

AIMS: The aim of this study was to isolate Escherichia coli O26, O103, O111 and O145 from 745 samples of bovine faeces using (i) immunomagnetic separation (IMS) beads coated with antibodies to lipopolysaccharide, and slide agglutination (SA) tests and (ii) PCR and DNA probes for the detection of the Verocytotoxin (VT) genes. METHODS AND RESULTS: IMS-SA tests detected 132 isolates of presumptive E. coli O26, 112 (85%) were confirmed as serogroup O26 and 102 had the VT genes. One hundred and twenty-two strains of presumptive E. coli O103 were isolated by IMS-SA, 45 (37%) were confirmed as serogroup O103 but only one of these strains was identified as Verocytotoxin-producing E. coli (VTEC). Using the PCR/DNA probe method, 40 strains of VTEC O26 and three strains of VTEC O103 were isolated. IMS-SA identified 21 strains of presumptive E. coli O145, of which only four (19%) were confirmed as serogroup O145. VTEC of this serogroup was not detected by either IMS-SA or PCR/DNA probes. E. coli O111 was not isolated by either method. CONCLUSION: IMS beads were 2.5 times more sensitive than PCR/DNA probe methods for the detection of VTEC O26 in bovine faeces. SIGNIFICANCE AND IMPACT OF THE STUDY: IMS-SA is a sensitive method for detecting specific E. coli serogroups. However, the specificity of this method would be enhanced by the introduction of selective media and the use of tube agglutination tests for confirmation of the preliminary SA results.     

Permeation Studies of Indomethacin from Different Emulsions for Nasal Delivery and Their Possible Anti-Inflammatory Effects

The purpose of this research was to develop an emulsion formulation of indomethacin (IND) suitable for nasal delivery. IND was incorporated into the oil phases of oil in water (O/W) and water in oil (W/O) emulsions. For this purpose, different emulsifying agents (Tween 80, Span 80 and Brij 58) were used in two emulsion formulations. When the effects of several synthetic membranes (nylon, cellulose, cellulose nitrate) were compared with the sheep nasal mucosa, the cellulose membrane and sheep nasal mucosa showed similar permeation properties for O/W emulsion (P > 0.05). To examine the absorption characteristics of IND, the anti-inflammatory properties of intravenous solution of IND, intranasal O/W emulsions of IND (with or without enhancers) and intranasal solution of IND (IND-Sol) were investigated in rats with carrageenan-induced paw edema. When citric acid was added to the nasal emulsion, the anti-inflammatory activity was similar to that of intravenous solution (P > 0.05). Finally, it was concluded that, intranasal administration of IND emulsion with citric acid may be considered as an alternative to intravenous and per oral administrations of IND to overcome their adverse effects.     

I/O access frequency-aware cache method on KVM/QEMU

Together with the rapid development of IT technology, cloud computing has been considered as the next generation’s computing infrastructure. One of the essential part of cloud computing is the virtual machine technology that enables to reduce the data center cost with better resource utilization. Especially, virtual desktop infrastructure (VDI) is receiving explosive attentions from IT markets because of its advantages of easier software management, greater data protection, and lower cost. However, sharing physical resources in VDI to consolidate multiple guest virtual machines (VMs) on a host has a tradeoff that can lead to significant I/O degradation. Optimizing I/O virtualization overhead is a challenging task because it needs to scrutinize multiple software layers between guest VMs and host where those VMs are executing. In this paper, we present a hypervisor-level cache, called hyperCache, which is possible to provide a shortcut in KVM/QEMU. It intercepts I/O requests in the hypervisor and analyses their I/O access patterns to select data retaining high access frequency. Also, it has a capability of maintaining the appropriate cache memory size by utilizing the cache block map. Our experimental results demonstrate that our method improves I/O bandwidth by up to 4.7x over the existing QEMU.     

Brain oxygenation and CNS oxygen toxicity after infusion of perfluorocarbon emulsion

Intravenous perfluorocarbon (PFC) emulsions, administered with supplemental inspired O(2), are being evaluated for their ability to eliminate N(2) from blood and tissue prior to submarine escape, but these agents can increase the incidence of central nervous system (CNS) O(2) toxicity, perhaps by enhancing O(2) delivery to the brain. To assess this, we infused a PFC emulsion (Oxycyte, 6 ml/kg iv) into anesthetized rats and measured cerebral Po(2) and regional cerebral blood flow (rCBF) in cortex, hippocampus, hypothalamus, and striatum with 100% O(2) at 1, 3, or 5 atmospheres absolute (ATA). At 1 ATA, brain Po(2) stabilized at >20 mmHg higher in animals infused with PFC emulsion than in control animals infused with saline, and rCBF fell by ~10%. At 3 ATA, PFC emulsion raised brain Po(2) >70 mmHg above control levels, and rCBF decreased by as much as 25%. At 5 ATA, brain Po(2) was ≥159 mmHg above levels in control animals for the first 40 min but then rose sharply; rCBF showed a similar profile, reflecting vasoconstriction followed by hyperemia. Conscious rats were also pretreated with PFC emulsion at 3 or 6 ml/kg iv and exposed to 100% O(2) at 5 ATA. At the lower dose, 80% of the animals experienced seizures by 33 min compared with 50% of the control animals. At the higher dose, seizures occurred in all rats within 25 min. At these doses, administration of PFC emulsion poses a clear risk of CNS O(2) toxicity in conscious rats exposed to hyperbaric O(2) at 5 ATA.     

嵌合O/GSLX/CHN/2010株S片段的基因工程口蹄疫病毒的生物学特性

【目的】研究嵌合口蹄疫病毒(Foot-and-mouth disease virus,FMDV) O/GSLX/CHN/2010株S片段的基因工程病毒的生物学特性。【方法】运用反向遗传操作技术,将FMDV O/GSLX/CHN/2010的S片段嵌合进2株同谱系FMDV的感染性克隆骨架,拯救得到两株基因工程嵌合病毒rGDexc、rGZexc;进而从病毒复制和病毒对乳鼠的致病力方面,对嵌合病毒、亲本基因工程病毒以及FMDV O/GSLX/CHN/2010株进行了评价。【结果】FMDV O/GSLX/CHN/2010株复制较慢,对乳鼠致病力较差。嵌合病毒和亲本基因工程病毒的复制能力、对乳鼠的致病力明显高于FMDV O/GSLX/CHN/2010株。【结论】研究表明FMDV O/GSLX/CHN/2010的S片段不能独自决定该病毒较差的复制能力和较弱的乳鼠致病力。这一发现为进一步研究O/GSLX/CHN/2010的致弱机制以及S片段对病毒生物学特性的影响奠定了基础。     

RAPID detection and quantification of E. coli O157/O26/O111 in minced beef by real-time PCR

AIM: To develop a real-time PCR detection procedure for Escherichia coli O111, O26 and O157 from minced meat. METHODS AND RESULTS: Strains (n = 8) of each of E. coli O26, E. coli O111 and E. coli O157 were inoculated at ca 10-20 CFU g(-1) into minced retail meat and enriched for 6 h at 41.5 degrees C as follows: E. coli O26 in tryptone soya broth (TSB) supplemented with cefixime (50 microg l(-1)), vancomycin (40 mg l(-1)) and potassium tellurite (2.5 mg l(-1)); E. coli O111 in TSB supplemented with cefixime (50 microg l(-1)) and vancomycin (40 mg l(-1)); E. coli O157 in E. coli broth supplemented with novobiocin (20 mg l(-1)). DNA was extracted from the enriched cultures, and detected and quantified by real-time PCR using verotoxin (vt1 and vt2) and serogroup (O157 per gene; O26 fliC-fliA genes and O111 wzy gene) specific primers. CONCLUSIONS: The methods outlined were found to be sensitive and specific for the routine detection of E. coli O111, O26 and O157 in minced beef. SIGNIFICANCE AND IMPACT OF THE STUDY: The enrichment, isolation and detection procedures used in this study provide a rapid routine-based molecular method for the detection and differentiation of E. coli O26, O111 and O157 from minced meat.     

Emulsion formed in bovine serum album/anionic surfactant/H2O system under acidic condition

At neutral pH, bovine serum album (BSA) conformation is "heart-shaped", and with decreasing pH, BSA may adopt the fast "F" form below a pH of about 4, and expanded "E" form at pH lower than about 3. However, as far as we know, the researches on the interaction between protein and surfactant are all carried out at pH higher than its isoelectric point (pI, which is 4.9), which means only the information about how the "heart-shaped" BSA interacts with surfactant is understood so far. In this paper, we studied the interaction between BSA and anionic surfactant at pH lower than its pI and hope to help understand the role of protein conformation in its interaction with surfactant. We found that BSA and anionic surfactant could form emulsion only when pH value was lower than or about 3, suggesting that the "E" formed BSA was an important criterion for emulsion formation. Moreover, the emulsion formation was companied with increased α-helix content and decreased β-sheet content for BSA. In addition, the emulsion formation was closely dependent on the anionic surfactant content; only a moderate anionic surfactant could make emulsion formed.     

Structures of the O-antigens of Escherichia coli O13, O129, and O135 related to the O-antigens of Shigella flexneri

O-Polysaccharides (O-antigens) were isolated from Escherichia coli O13, O129, and O135 and studied by chemical analyses along with 2D ¹H and ¹³C NMR spectroscopy. They were found to possess a common →2)-l-Rha-(α1→2)-l-Rha-(α1→3)-l-Rha-(α1→3)-d-GlcNAc-(β1→ backbone, which is a characteristic structural motif of the O-polysaccharides of Shigella flexneri types 1-5. In both the bacterial species, the backbone is decorated with lateral glucose residues or/and O-acetyl groups. In E. coli O13, a new site of glycosylation on 3-substituted Rha was revealed and the following O-polysaccharide structure was established:The structure of the E. coli O129 antigen was found to be identical to the O-antigen structure of S. flexneri type 5a specified in this work and that of E. coli O135 to S. flexneri type 4b reported earlier.     

Factors affecting the ADP/O ratio in isolated chloroplasts.

(1) The effect of gradual disruption of the outer membrane of intact chloroplasts on CO2 fixation, electron transport and phosphorylation was investigated. The results suggested that whilst ferricyanide and substrate amounts of ADP enter intact chloroplasts only very slowly, methyl viologen rapidly penetrates the outer membrane. (2) Preparatwons of intact pea chloroplasts had an ATP-consuming reaction which resulted in decreased ADP/O ratios when noncyclic electron transport was measured after disruption of the outer membrane. The ATP-consuming reaction was removed into the supernatant after washing the disrupted chloroplasts. The resulting washed chloroplasts gave ADP/O ratios of 1.5-1.6 for ferricyanide and 1.9-2.0 for methyl viologen. (3) Preparations of intact spinach chloroplasts had lower activity of the ATP-consuming reaction and gave similar ADP/O ratios to washed pea chloroplasts. The ADP/O ratios of spinach chloroplasts did not alter significantly after washing. (4) An investigation of the effect of various assay conditions on the ADP/O ratio showed that the phosphate concentration was critical in obtaining optimal values for ADP/O ratio. Decreasing the phosphate concentration below 10 mM decreased the ADP/O ratio significantly. (5) It is suggested that the maximum ADP/O ratio of chloroplasts is 2.0 but that lower values can be obtained in the presence of an ATP-consuming reaction, under suboptimal assay conditions or where the chloroplasts are structurally damaged.