Induction of fast-growing and morphologically different strains through intergeneric protoplast fusions of Ulva and Enteromorpha (Ulvales,Chlorophyta)

Isolated protoplasts of Ulva pertusa and Enteromorpha prolifera were electrically fused. Treatment of protoplasts in 1% protease for 15–20 min prior to fusion enhanced fusion ability. Protoplasts from each fusion partner were mixed together in 1:1 ratio in low conductivity electrofusion solution at a density of 1 × 10⁵ cells ml⁻¹ before subjecting them to electrofusion. The protoplasts were aligned in AC field (1MHz, 25 V for 10–15 s) and subsequently fused by a high intensity single DC pulse of 250 V for 25 μs duration. Fusion buffer supplemented with 1 mM calcium and 1 mM magnesium yielded optimum fusion frequencies (about 18–24%). Entrapment of fusion treated cells inside agarose/agar plate facilitated marking and regeneration of fusion products. The regeneration patterns of fused protoplasts were similar to normal (unfused) protoplast development. Most of the regenerated plants from fusion products had a thallus similar to either U. pertusa type or E. prolifera type. Although some of the plants of the former were morphologically similar to U. pertusa, but most had a higher growth rate (1.9 to 1.5 times) than U. pertusa. Furthermore the thallus of some plants had a characteristic irregular and dentate margin, which was never observed in the parental type.     

The hydraulic conductivity as a criterion for the membrane integrity of protoplasts fused by an electric field pulse

The hydraulic conductivity of the membrane, Lp, of fused plant protoplasts was measured and compared to that for unfused cells, in order to identify possible changes in membrane properties resulting from the fusion process. Fusion was achieved by an electric field pulse which induced breakdown in the membranes of protoplasts in close contact. Close membrane contact was established by dielectrophoresis. In some experiments pronase was added during field application; pronase stabilizes protoplasts against high field pulses and long exposure times to the field. The Lp-values were obtained from the shrinking and swelling kinetics in response to osmotic stress. The Lp-values of fused mesophyll cell protoplasts of Avena sativa L. and of mesophyll and guard cell protoplasts of Vicia faba L. were found to be 1.9±0.9·10^-6, 3.2±2.2·10^-6, and 0.8±0.7·10^-6 cm·bar^-1·s^-1, respectively. Within the limits of error, no changes in the Lp-values of fused protoplasts could be detected in comparison to unfused protoplasts. The Lp-values are in the range of those reported for walled cells of higher plants, as revealed by the pressure probe.Abbreviations GCP guard cell protoplast - Lp hydraulic conductivity - MCP mesophyll cell protoplast     

Electrical fusion for optimal formation of protoplast heterokaryons in Nicotiana

The electrical fusion of protoplasts has been studied in order to maximize the formation of heterokaryons for culture. Heterokaryons of Nicotiana tabacum L. mesophyll protoplasts and N. plumbaginifolia Viviani supension-cell protoplasts were identified in fixed and stained as well as living material; a quantitative fusion index was thereby developed. With this index the efficiencies of various electric fields and fusion-chamber designs have been determined. Optimal fusion was obtained with an alternating-current (AC) field of 150 V/cm and direct-current (DC) square-wave pulses of 1000 V/cm. A new, simple-to-use, largescale fusion chamber is described in which batches of up to 5·10⁵ protoplasts (0.5 ml of cells at 10⁶/ml) can be fused in 5–7 min with efficiencies approaching 40%. Half of the fusion products are heterokaryons, thus fusion is random. Of the fusion products, 60% are bi- or trinucleate. Using fusion procedures similar to those described here Bates and C. Hasenkampf (1985, Theor. Appl. Genet., in press) have recovered viable somatic hybrids which have been regenerated.Abbreviations AC alternating current - DC direct current - PEG polyethylene glycol     

Regeneration and characterization of plants produced from mature tobacco pollen protoplasts via gametosomatic hybridization

Summary Mature pollen protoplasts (n) isolated from kanamycin resistant plants of Nicotiana tabacum (2n = 4x = 48) were fused with somatic mesophyll protoplasts (2n) of Nicotiana plumbaginifolia (2n = 20) to produce plants. A total of 3.6·10⁶ mature pollen protoplasts were fused with 7·10⁶ mesophyll protoplasts using a PEG/Ca²⁺ method. Mature pollen protoplasts did not divide in our culture conditions, and N. plumbaginifolia protoplasts stopped dividing when the protoplast-derived colonies were transferred to a selection medium containing paromomycine (20 mg·l^-1). A total of 133 actively growing colonies were recovered on the selection medium containing kanamycin (100 mg·l^-1). Plants from twenty resulting cell lines were confirmed as hybrids (17) or cybrids (3) based on leaf and floral morphology and fertility analysis. Isozyme pattern analysis confirmed the nuclear hybrid and cybrid nature, respectively, for 2 and 3 typical gametosomatic selected plants. Root tip squashes of 6 of the gametosomatic hybrid plants revealed chromosome numbers ranging from 44 to 68; the 3 selected cybrid plants had 48 chromosomes. Evidence for organelle transmission from the mesophyll partner in the gametosomatic plants is shown. From the analysis it can be concluded that the gametosomatic fusion involving mature pollen protoplasts (n) carrying a dominant selection marker can be convenient for synthesis of either hybrids or cybrids. Such gametosomatic fusion is therefore considered as a new approach towards the production of androgenetic plants with a choosen cytoplasm.Abbreviations AAT aspartate aminotransferase - BCP bromocresol purple - EST esterase - MES 2-(N-morpholino) ethanesulfonic acid - AP acid phosphatase - PEG polyethyleneglycol - PER peroxydase     

Electrofusion of protoplasts from celery (Apium graveolens L.) with protoplasts from the filamentous fungus Aspergillus nidulans

A method was developed for electrofusion of higher-plant protoplasts from celery and protoplasts from the filamentous fungus Aspergillus nidulans. Initially, methods for the fusion of protoplasts from ecch species were determined individually and, subsequently, electrical parameters for fusion between the species were determined. Pronase-E treatment and the presence of calcium ions markedly increased celery protoplast stability under the electrical conditions required and increased fusion frequency with A. nidulans protoplasts. A reduction in protoplast viability was observed after electrofusion but the majority of the protoplasts remained viable over a 24-h incubation period. A small decline in protoplast respiration rate occurred during incubation but those celery protoplasts fused with A. nidulans protoplasts showed elevated respiration rates for 3 h after electrofusion.Abbreviations AC alternating current - DC direct current     

Fusion characteristics of plant protoplasts in electric fields

The electrical parameters important in the fusion of plant protoplasts aligned dielectrophoretically in high-frequency alternating electric fields have been established. Protoplasts were aligned in an alternating electric field between two relatively distant (1 mm) electrodes, by dielectrophoresis induced by field inhomogeneities caused by the protoplasts themselves. This arrangement allowed ease of manipulations, large throughput and low loss of protoplasts. In analytical experiments, sufficiently large samples could be used to study pulse duration-fusion response relations at different pulse voltages for protoplasts of different species, tissues and size (mesophyll protoplasts of Solanum brevidens, Triticum aestivum, Hordeum vulgare; suspension-culture protoplasts of Nicotiana sylvestris, N. rustica, Datura innoxia and S. brevidens; root-tip protoplasts of Vicia faba, hypocotyl protoplasts of Brassica napus). The percentage of aligned protoplasts that fused increased with increasing pulse parameters (pulse duration; voltage) above a threshold that was dependant on pulse voltage. The maximum fusion values obtained depended on a number of factors including protoplast origin, size and chain length. Leaf mesophyll protoplasts fused much more readily than suspension-culture protoplasts. For both types, there was a correlation of size with fusion yield: large protoplasts tended to fuse more readily than small protoplasts. In short chains (five protoplasts), fusion frequency was lower, but the proportion of one-to-one products was greater than in long chains (ten protoplasts). In formation by electrofusion of heterokaryons between mesophyll and suspension-culture protoplasts, the fusion-frequency response curves reflected those of homofusion of mesophyll protoplasts rather than suspension-culture protoplasts. There was no apparent limitation to the fusion of the smallest mesophyll protoplast with the largest suspension-culture protoplasts. Based on these observations, it is possible to direct fusion towards a higher frequency of one-to-one (mesophyll/suspension) products by incorporating low densities of mesophyll protoplasts in high densities of suspensionculture protoplasts and by using a short fusion pulse. The viability of fusion products, assessed by staining with fluorescein diacetate, was not impaired by standard fusion conditions. On a preparative scale, heterokaryons (S. brevidens mesophyll-N. sylvestris or D. innoxia suspension-culture) were produced by electrofusion and cultured in liquid or embedded in agar, and were capable of wall formation, division and growth. It is concluded that the electrode arrangement described is more suitable for carrying out directed fusions of plant protoplasts than that employing closer electrodes.     

Transmission genetics of the somatic hybridization process in Nicotiana

Summary Callus protoplasts of a Nicotiana tabacum chlorophyll-deficient mutant were fused with mesophyll protoplasts from one of following five sources: 4 cmsanalogs of tobacco bearing the cytoplasms of N. plumbaginifolia, N. suaveolens, N. repanda, and N. undulata, respectively, as well as wild species N. glauca. In another series of experiments, callus protoplasts from the chlorophyll-deficient genome Su/Su mutant of tobacco were fused with mesophyll protoplasts of the wild species N. glauca and those of a plastome chlorophyll-deficient tobacco mutant. The screening of hybrids consisted of visual identification followed by mechanical isolation and cloning of heteroplasmic fusion products in microdroplets of nutrient medium. Studies of regenerated plants included the analyses of gross morphology of plants, leaf and flower morphology, analysis of chromosome size and morphology and chromosome numbers, studies of multiple molecular forms of esterase and amylase, analysis of chloroplast DNA restriction patterns and analyses of chlorophyll-deficiency controlled by Su and P ^– genes. The study of progeny of 41 clones representing all species' combinations demonstrated that regenarants of most (63%) clones from intraspecific (for nuclear genes) combinations were cybrid forms, whereas in the case of the fusion N. tabacum + N. glauca, the true nuclear hybrids prevailed and the proportion of cybrids did not exceed 26%. Clones regenerating both hybrid and cybrid plants from the same fusion product were also found.     

Somatic hybridization between selected Lycopersicon and Solanum species

Summary Mesophyll protoplasts of an interspecific Lycopersicon esculentum Mill, (tomato) x Lycopersicon pennellii hybrid plant (EP) were fused with callus-derived protoplasts of Solanum lycopersicoides Dun. using a modified PEG/DMSO procedure. The EP plant was previously transformed by Agrobacterium tumefaciens which carried the NPTII and nopaline synthase genes. Protoplasts were plated at 10⁵/ml in modified KM medium and 16 days post-fusion 25 ug/ml kanamycin was added to the culture medium. During shoot regeneration, 212 morphologically similar putative somatic hybrids were delineated visually from kanamycin resistant EP's. Forty-eight shoots, randomly selected among the 212, were further verified as somatic hybrids by their leaf phosphoglucoisomerase heterodimer isozyme pattern. However, the resulting plants were virtually pollen sterile. In a second fusion, mesophyll protoplasts of Solanum melongena (eggplant) were fused with EP callus-derived protoplasts. Using the same fusion and culture procedure, only two dark green calli were visually selected among the pale green parental EP and verified as somatic cell hybrids by several isozyme patterns. These two calli have produced only leaf primordia in one and half years on regeneration medium.Abbreviations ABA abscisic acid - BAP 6 benzylaminopurine - 2,4-D 2,4 dichlorophenoxy acetic acid - DMSO dimethyl sulfoxide - GA₃ gibberellic acid - GOT glutamate oxaloacetate - IAA indoleacetic acid - IBA indolebutyric acid - IDH isocitrate dehydrogenase - MDH malate dehydrogenase - MES morpholinoethane-sulfonic acid - PEG polyethylene glycol - 6-PGDH 6 phosphogluconate dehydrogenase - PGI phosphoglucoisomerase     

Protoplast fusion of Schizosaccharomyces pombe auxotrophic mutants of identical mating-type

Summary Protoplasts of methionine-and lysine-requiring h^- mutants isolated from the L972 h^- strain of Schizosaccharomyces pombe were fused. The protoplasts were obtained from the cells with enzymes produced by Trichoderma viride. When a mixture of the protoplasts was treated with 30% PEG 4000 solution containing 10 mM CaCl₂, cell fusion and complementation was attained with a frequency of 0.17%. Both fusion partners were recovered among the spores after crossing of the fusion products with the strain M210 ade6 h⁺. Cytological and haploidization examinations showed that the fusion cells are not heterokaryons, and that the increased amount of genetic material is situated in one nucleus.     

Interspecific protoplast fusion to rescue a cytoplasmic lincomycin resistance mutation into fertile Nicotiana plumbaginifolia plants

Summary A lincomycin-resistant cell line, LR105, was isolated in a mutagenized (0.1 mM N-ethyl-N-nitrosourea) callus culture initiated from a haploid Nicotiana sylvestris plant. The regenerated plants had an abnormal morphology and did not set viable seeds.Transfer of lincomycin resistance was attempted from the original N. sylvestris nuclear background into Nicotiana plumbaginifolia by protoplast fusion, since it was expected that resistance would be cytoplasmically coded. LR105 protoplasts were irradiated with a lethal dose (120 J kg^-1; ⁶⁰ Co source), fused with sensitive N. plumbaginifolia protoplasts and the colonies grown from the fused population were screened for lincomycin resistance. Expression of resistance was expected only if the cytoplasm of the irradiated cells had mixed with nonirradiated cytoplasm, and was reactivated as a result of cell fusion (Menczel et al. 1982).Plants were regenerated in 44 resistant clones. Plants in 41 clones had a N. plumbaginifolia nuclear genome. In three clones somatic hybrids were obtained. The resistant N. plumbaginifolia cybrid plants were fertile, unlike the original LR105 plants. Lincomycin resistance was inherited maternally in the eight clones in which crosses were made. In these clones the introduction of N. sylvestris chloroplasts into a N. plumbaginifolia nuclear background was confirmed by the SmaI restriction endonuclease pattern of the chloroplast DNA. The involvement of chloroplast DNA in determining lincomycin resistance is therefore implied.     

High-speed electro-fusion and electro-transfection of plant protoplasts by a continuous flow electro-manipulator

A continuous flow electro-manipulator available both for mass production of fused and of transfected plant protoplasts was devised using a flow chamber with gold-coated glass panel electrodes. Up to 100 ml of protoplasts suspension were treated within 20 min at the rate of approximately 1×10⁶ protoplasts / min. The yield of diheterokaryons between tobacco mesophyll and carrot root protoplasts reached approximately 10 % of total protoplasts by flow electro-fusion. More than 95 % of tobacco and cowpea mesophyll protoplasts became infected with tobacco mosaic virus RNA by flow electro-transfection.     

Correction of nitrate reductase defect in auxotrophic plant cells through protoplast-mediated intergeneric gene transfers

Summary Nitrate reductase-deficient cells of Nicotiana tabacum cv Gatersleben (coded cnx-68) lacking active molybdenum-cofactor were corrected by introducing the genes from Physalis minima and Datura innoxia into NR^- genomes. In these itergeneric reconstruction experiments, X-irradiated inactive mesophyll protoplasts of Physalis and Datura were fused separately with the cultured cell protoplasts of cnx-68 Nicotiana. A total of 45 cell colonies, 37 transformed by Physalis and 8 by Datura, were selected from about 1.7×10³ heteroplasmic fusion products. The selection of transformants was made by their ability to grow on a medium containing nitrate as the sole nitrogen source. Some of these transformants were further characterized with respect to nitrate reductase, xanthine dehydrogenase and glutamate dehydrogenase activities, chlorate sensitivity, and chlorophyll synthesis. The restoration of nitrate reductase and xanthine dehydrogenase activities confirm the presence of an active form of the molybdenum-cofactor by the expression of introduced genes of Physalis and Datura into the genome of cnx-68 Nicotiana. Such stable transformations via fusion of normal and highly irradiated protoplasts may have a considerable application in higher plants for introducing desirable characters from diverse genomes.     

Intraspecific fusion ofAspergillus niger strains producing citric acid using heat-inactivated and living protoplasts

Protoplasts from a prototrophicAspergillus niger strain were first inactivated at 55°C for 12 min with a regeneration frequency of 3.5×10⁻⁶, and then fused with living protoplasts from an auxotrophic strain. The fusion frequency was 1.1×10⁻⁵. Some fusants segregated sectors of prototrophic recombinants Citric acid production in submerged cultivation of these recombinants was examined. More recombinants were obtained by further treating the fusants with (+)-camphor, a diploidization inducer.     

Polyethylene-glycol induced fusion of bacterial protoplasts

Summary Direct selection for recombinants by supplemented minimal media from polyethylene-glycol (PEG)-induced fusion of protoplasts of polyauxotrophic strains of B. megaterium revealed striking physiological influences on the yield of recombinants. Cytoplasmic state of the protoplasts to be fused, rather than genetic events, determined the number of colonies obtained on the selection media. It is suggested that the physiological effects primarily influenced the ability of the fused protoplasts to revert to bacillary form.     

Malachite green treatment of industrial Penicillium chrysogenum protoplasts results in increased penicillin-V formation

We attempted protoplast fusion in order to generate gene transfer between an industrial strain of Penicillium chrysogenum and a fission yeast, Schizosaccharomyces pombe. The Penicillium strain was treated with malachite green. The S. pombe strain was auxotrophic for lysine. The regenerated colonies showed Penicillium morphology. The number of Penicillium colonies was significantly higher when the inactivated Penicillium protoplasts were fused to S. pombe protoplasts than in the self-fusion control experiments. We randomly isolated colonies from the regeneration plates and measured beta-lactam formation in cultures from shaken flasks. Antibiotic production was increased in colonies originated from the malachite green-treated protoplasts. Received 2 June 1998/ Accepted in revised form 30 November 1998     

The behavior of <Emphasis Type="Italic">Bupleurum scorzonerifolium</Emphasis> as a parent of somatic hybrid introgressed lines is associated with UV resistance of its chromosomes

Protoplasts of Bupleurum scorzonerifolium irradiated with 380 μW/cm² UV for 5 min were fused by the PEG-mediated method with untreated protoplasts of Arabidopsis thaliana. The fusion products were cultured in the P5 liquid medium for single hybrid cell clone formation. As a total, 81 independent putative hybrid clones (cell lines) were obtained, and seventeen of them were identified as somatic hybrids by chromosome counting, GISH, RAPD, and SSR analyses. More than 80 B. scorzonerifolium-like green introgressed plants and leaves were regenerated from 49 somatic hybrid cell lines, which contained chromatin and DNA characteristic of A. thaliana. To assess the UV tolerance of both parents with chromatin exclusion and introgression, their protoplasts were UV-irradiated (380 μW/cm² for 0 and 5 min), and the protoplasts of A. thaliana were more sensitive to UV than those of B. scorzonerifolium as judged by Single Cell Gel Electrophoresis analysis. The possible relationship between UV resistance of B. scorzonerifolium and A. thaliana chromosome elimination and the formation of somatic introgressed hybrid plants is discussed.     

Protoplast fusion ofCatharanthus roseus cells by electrofusion of chemically-agglutinated protoplasts

Mesophyll derived protoplasts ofCatharanthus roseus cv. Little pinkie were fused with protoplasts derived from an habituated cell line ofC. roseus. Polyethylene glycol was used as agglutinating agent while fusions were induced by square pulses. Best results were obtained by fusing protoplasts from primary leaves with those from three-day-old cell cultures. Adding calcium ions considerably enhanced heterofusion rate. Good cell viabilities indicated that this fusion process was not cytotoxic. The heterofusion frequency was up to 10% or more. Most of the heterokaryons were able to regenerate their cell walls and underwent division. Communicated by J. TUPY     

Restriction fragment length polymorphism (RFLP) analyses of plants produced by in vitro anther culture of Solanum chacoense Bitt

Summary Green mesophyll protoplasts of the dihaploid potato line 1982 (Solanum tuberosum L.) were fused with herbicide-bleached mesophyll protoplasts of the dihaploid potato line 679 using a polyethylene glycol protocol. Heterokaryons were identified under a fluorescence microscope using the dual fluorescence of carboxyfluorescein-stained, herbicide-bleached protoplasts and the autofluorescence of green mesophyll protoplasts. About 20% of the protoplasts survived the fusion treatment, and the fusion frequency was 3%–4%. Unfused and fused protoplasts were mass cultured for 6 weeks after which vigorously growing calli were selected and transferred to shoot regeneration medium. Somatic hybrids were identified by a combination of five isozyme markers, and the ploidy level was determined by flow cytometry. Out of 15 calli that regenerated shoots, 6 plants derived from 2 different calli were identified as hexaploid somatic hybrids, while one morphologically deviant plant from a third callus was identified as a mixoploid that had lost some enzyme markers after 4 months of culturing.     

Chromosomes in somatic hybrids between Nicotiana plumbaginifolia and a monoploid potato

Summary Leaf mesophyll protoplasts of the monohaploid potato (Solanum tuberosum L.) clone H7322 were fused with callus protoplasts of nitrate reductase deficient (NR^–) mutants Cnx 20 and NA 36 of Nicotiana plumbaginifolia. Somatic hybrid lines were selected for nitrate reductase proficiency. All callus lines tested appeared to be stable for the retention of the potato chromosome carrying the compensating NR gene when grown for over 1.5 years in the absence of nitrate. Shoots were regenerated from six different fusion lines of Cnx 20 + H7322 24 months after fusion. Chromosomal analysis in callus cultures revealed that in both fusion combinations 40–120 N. plumbaginifolia chromosomes were present, as were 9–20 potato chromosomes. Cells with 17 potato chromosomes in combination with a relatively small number (31) of N. plumbaginifolia chromosomes were found in one line. Preferential loss of species-specific chromosomes was not observed. Analysis of regenerating tissue from three lines of Cnx 20 + H7322 revealed that after 24 months of culture intra- and intergeneric translocations, fragments and deletions were present. Elimination of the potato and N. plumbaginifolia chromosomes had taken place before and after genome doubling.     

Development and evaluation of a storage root-bearing sweetpotato somatic hybrid between <Emphasis Type="Italic">Ipomoea batatas</Emphasis> (L.) Lam. and <Emphasis Type="Italic">I. triloba</Emphasis> L.

A storage root-bearing somatic hybrid was produced for the first time by protoplast fusion between sweetpotato (Ipomoea batatas (L.) Lam.) cv. Kokei No. 14 and its wild relative I. triloba L. Protoplasts isolated from embryogenic suspension cultures of Kokei No. 14 were fused with petiole protoplasts of I. triloba L. using polyethylene glycol-mediated protocol. Fusion products were cultured in a modified Murashige and Skoog medium containing 0.05 mg l⁻¹ 2,4-dichlorophenoxyacetic acid (2,4-D) and 0.5 mg l⁻¹ kinetin. A total of 176 plants were obtained from 42 out of 134 calluses derived from fused protoplasts, and 91 of these plants were confirmed to be somatic hybrids through peroxidase isozyme, random amplified polymorphic DNA, amplified fragment length polymorphism, and cytological analyses. Upon transfer into soil and grown in the greenhouse and then to the field, 100% survival was observed. A single plant, designated KT1, was found to produce storage roots. Genomic in situ hybridization analysis confirmed presence of chromosomes from both parents and recombinant chromosomes in KT1. Drought tolerance, dry matter content, soluble sugar content, and fertility of this somatic hybrid were evaluated for potential use in sweetpotato breeding.