Enzymatic preparation of novel thermoplastic di-block copolyesters containing poly[(R)-3-hydroxybutyrate] and poly(epsilon-caprolactone) blocks via ring-opening polymerization

Enzymatic modification of a microbial polyester was achieved by the ring-opening polymerization of epsilon-caprolactone (CL) with low-molecular weight telechelic hydroxylated poly[( R)-3-hydroxybutyrate] (PHB-diol) as initiator and Novozym 435 (immobilized Candida antarctica Lipase B) as catalyst in anhydrous 1,4-dioxane or toluene. The ring-opening polymerization was investigated at different conditions with two different types of PHB-diols: PHB-diol(P), containing a primary OH and a secondary OH end groups, and PHB-diol(M), consisting of 91% PHB-diol(P) and 9% PHB-diol containing two secondary OH end groups. The reactions were followed by GPC analyses of the resulting polymers at different time points, and the optimal conditions were established to be 70 degrees C at a weight ratio of CL/enzyme/solvent of 8:1:24. The ring-opening polymerization of CL with PHB-diol(M) (Mn of 2380, NMR) at the molar ratio of 50:1 under the optimal conditions in 1,4-dioxane gave the corresponding poly[HB(56 wt %)-co-CL(44 wt %)] with Mn (NMR) of 3900 in 66% yield. Polymerization of CL and PHB-diol(P) ( Mn of 2010, NMR) at the same condition in toluene gave the corresponding poly[HB(28 wt %)-co-CL(72 wt %)] with Mn (NMR) of 7100 in 86% yield. Both polymers were characterized by (1)H and (13)C NMR and IR analyses as di-block copolyesters containing a PHB block with a secondary OH end group and a poly(epsilon-caprolactone) (PCL) block with a primary OH end group. NMR analyses and control experiments suggested no formation of random copolymers and no change of the PHB block during the reaction. The enzymatic ring-opening polymerization was selectively initiated by the primary OH group of PHB-diol, whereas the secondary OH group remained as an end group in the final polymers. The thermal properties of the di-block poly(HB-co-CL)s were analyzed by DSC, with excellent T g values for the elastomer domain: poly[HB(56 wt %)- co-CL(44 wt %)] with M n (NMR) of 3900 demonstrated a T g of -57 degrees C, Tm of 145, 123, and 53 degrees C; and poly[HB(28wt%)-co-CL(72wt%)] with Mn (NMR) of 7100 gave a Tg of -60 degrees C, Tm of 147 and 50 degrees C. Thus, the selective enzymatic ring-opening polymerization with PHB-diol as macro-initiator provides a new method for the preparation of PHB-based block copolymers as biomaterials with good thermoplastic properties and novel structures containing functional end groups.     

Chain transfer reaction catalyzed by various polyhydroxyalkanoate synthases with poly(ethylene glycol) as an exogenous chain transfer agent

Polyhydroxyalkanoate (PHA) synthases catalyze chain transfer (CT) reaction after polymerization reaction of PHA by transferring PHA chain from PHA synthase to a CT agent, resulting in covalent bonding of CT agent to PHA chain at the carboxyl end. Previous studies have shown that poly(ethylene glycol) (PEG) is an effective exogenous CT agent. This study aimed to compare the effects of PEG on CT reaction during poly[(R)-3-hydroxybutyrate] [P(3HB)] synthesis by using six PHA synthases in Escherichia coli JM109. The synthesized P(3HB) polymers were characterized in terms of molecular weight and end-group structure. Supplementation of PEG to the culture medium reduced P(3HB) molecular weights by up to 96% due to PEG-induced CT reaction. The P(3HB) polymers were subjected to ¹H NMR analysis to confirm the formation of a covalent bond between PEG and P(3HB) chain at the carboxyl end. This study revealed the reactivity of PHA synthases to PEG with respect to CT reaction in E. coli.     

In vitro evidence of chain transfer to tetraethylene glycols in enzymatic polymerization of polyhydroxyalkanoate

A polyhydroxyalkanoate (PHA) was enzymatically synthesized in vitro, and the end structure of PHA associated with a chain transfer (CT) reaction was investigated. In the CT reaction, PHA chain transfers from PHA synthase (PhaC) to a CT agent, resulting in covalent bonding of CT agent to the PHA chain at its carboxyl end. In vitro CT reaction has never been demonstrated because of relatively low yields of in vitro synthesized poly[(R)-3-hydroxybutyrate)] (P(3HB)), which makes it difficult to characterize the end structures of the polymers by nuclear magnetic resonance (NMR). To overcome these difficulties, a novel in vitro synthesis method that produced relatively larger amounts of P(3HB) was developed by employing PhaC_Da from Delftia acidovorans and two enantioselective enoyl-coenzyme A (CoA) hydratases which were R-hydratase (PhaJ_Ac) from Aeromonas caviae and S-hydratase (FadB1x) from Pseudomonas putida KT2440 with β-butyrolactone and CoA as starting materials. Using this method, P(3HB) synthesis was performed with tetraethylene glycols (TEGs) as a discriminable CT agent, and the resultant P(3HB) was characterized by ¹H-NMR. NMR analysis revealed that the carboxylic end of P(3HB) was covalently linked to TEGs, providing the first direct evidence of in vitro CT reaction.     

Synthesis and degradation of polyhydroxyalkanoates in Alcaligenes eutrophus

Abstract The kinetics and mechanism of the synthesis and degradation of polyhydroxyalkanoates (PHA) in Alcaligenes eutrophus have been studied. PHA polymers were accumulated in the cells in nitrogen-free mineral media containing various carbon substrates, and the accumulated PHA polymers were subsequently degraded after the carbon sources were exhausted. The number of PHA polymerase molecules per cell was determined to be 18,000. The kinetic data of poly(3-hydroxybutyrate) (P(3HB)) synthesis indicated that about two molecules of d (−)-3-hydroxybutyryl-CoA are added within 1 s into a propagating chain of P(3HB) on the active site of polymerase, and that the average lifetime of a propagating P(3HB) chain is about 1 h. The intracellular PHA depolymerase was suggested to be exo -type hydrolase. The pathway and regulation of PHA synthesis were studied using [5-¹³C]pentanoic acid as the sole carbon source.     

Nonhydrolytic fragmentation of a poly[(R)-3-hydroxybutyrate] single crystal revealed by use of a mutant of polyhydroxybutyrate depolymerase

This paper reports the initial process of the enzymatic degradation of solution-grown lamellar single crystals of bacterial poly[(R)-3-hydroxybutyrate] (P(3HB)) with an extracellular polyhydroxybutyrate (PHB) depolymerase purified from Alcaligenes faecalis T1. We used a hydrolytic-activity-disrupted mutant of the PHB depolymerase in order to avoid the influence of hydrolytic reaction in the system. The effect of addition of the mutant enzyme upon the P(3HB) single crystals was investigated by turbidimetric assay, high-performance liquid chromatography (HPLC), and atomic force microscopy (AFM). Suspension turbidity of the P(3HB) single crystals increased after addition of the mutant enzyme having no hydrolytic activity. No soluble product from the P(3HB) single crystals with the mutant enzyme was detected by HPLC. AFM observation of the P(3HB) single crystals adsorbed on highly ordered pyrolytic graphite revealed that the mutant enzyme yielded a lot of lengthwise crystal fragments from the P(3HB) single crystals. On the basis of these results, we concluded that the mutant enzyme disturbs the molecular packing of the P(3HB) polymer chain around the loose chain packing region in the single crystal, resulting in the fragmentation. Therefore, it is suggested that the enzymatic degradation of P(3HB) single crystals with a wild-type PHB depolymerase progresses via three steps: (1) adsorption of the enzyme onto the surface of the single crystal; (2) disturbance of the molecular packing of P(3HB) polymer chain in the single crystal by the adsorbed enzyme; and (3) hydrolysis of the disturbed polymer chain by the adsorbed enzyme.     

Long-term preservation of myocardial energetic in chronic hibernating myocardium

We previously reported that the myocardial energetic state, as defined by the ratio of phosphocreatine to ATP (PCr/ATP), was preserved at baseline (BL) in a swine model of chronic myocardial ischemia with mild reduction of myocardial blood flow (MBF) 10 wk after the placement of an external constrictor on the left anterior descending coronary artery. It remains to be seen whether this stable energetic state is maintained at a longer-term follow-up. Hibernating myocardium (HB) was created in minipigs (n = 7) by the placement of an external constrictor (1.25 mm internal diameter) on the left anterior descending coronary artery. Function was assessed with MRI at regular intervals until 6 mo. At 6 mo, myocardial energetic in the HB was assessed by (31)P-magnetic resonance spectrometry and myocardial oxygenation was examined from the deoxymyoglobin signal using (1)H-magnetic resonance spectrometry during BL, coronary vasodilation with adenosine, and high cardiac workload with dopamine and dobutamine (DpDb). MBF was measured with radiolabeled microspheres. At BL, systolic thickening fraction was significantly lower in the HB compared with remote region (34.4 ± 9.4 vs. 50.1 ± 10.7, P = 0.006). This was associated with a decreased MBF in the HB compared with the remote region (0.73 ± 0.08 vs. 0.97 ± 0.07 ml · min(-1) · g, P = 0.03). The HB PCr/ATP at BL was normal. DpDb resulted in a significant increase in rate pressure product, which caused a twofold increase in MBF in the HB and a threefold increase in the remote region. The systolic thickening fraction increased with DpDb, which was significantly higher in the remote region than HB (P < 0.05). The high cardiac workload was associated with a significant reduction in the HB PCr/ATP (P < 0.02), but this response was similar to normal myocardium. Thus HB has stable BL myocardial energetic despite the reduction MBF and regional left ventricular function. More importantly, HB has a reduced contractile reserve but has a similar energetic response to high cardiac workload like normal myocardium.     

Chain termination in polyhydroxyalkanoate synthesis: involvement of exogenous hydroxy-compounds as chain transfer agents.

We have identified a range of compounds which, when present during poly(3-hydroxybutyrate) [P(3HB)] accumulation by Ralstonia eutropha (reclassified from Alcaligenes eutrophus), can act as chain transfer agents in the chain termination step of polymerization. End-group analysis by 31P NMR of polymer derivatized with 2-chloro-4,4,5,5-tetramethyl-1,3,2-dioxaphospholane revealed that all these compounds were covalently linked to P(3HB) at the carboxyl terminus. All chain transfer agents possessed one or more hydroxyl groups, and glycerol was selected for further investigation. The number-average molecular mass (Mn) of P(3HB) produced by R. eutropha from glycerol was substantially lower than for polymer produced from glucose, and we identified two new end-group structures. These were attributed to a glycerol molecule bound to the P(3HB) chain via the primary or secondary hydroxyl groups. When a primary hydroxyl group of glycerol is involved in chain transfer, the end-group structure is in both [R] and [S] configurations, implying that chain transfer to glycerol is a random transesterification and that PHA synthase does not catalyse chain transfer. 3-Hydroxybutyric acid is the most probable chain transfer agent in vivo, with propagation and termination reactions involving transfer of the P(3HB) chain to enzyme-bound and free 3-hydroxybutyrate, respectively. Only carboxyl end-groups were detected in P(3HB) extracted from exponentially growing bacteria. It is proposed that a compound other than 3-hydroxybutyryl-CoA acts as a primer in the initiation of polymer synthesis.     

Nonspecific hydrophobic interactions of a repressor protein, PhaR, with poly[(R)-3-hydroxybutyrate] film studied with a quartz crystal microbalance

The gene expression for phasins (PhaP), which are predominantly polyhydroxyalkanoates (PHAs) granule-associated proteins, is regulated by a repressor protein of PhaR through the dual binding abilities of PhaR to the target DNAs and the granules. In this study, the binding functions of PhaR to poly[(R)-3-hydroxybutyrate] (P(3HB)) were investigated quantitatively by using a quartz crystal microbalance (QCM) technique. Adsorption of PhaR onto a melt-crystallized film of P(3HB) (cr-P(3HB)) was detected as a negative frequency shift of the QCM. The time course of the frequency changes observed for PhaR adsorption was composed of a quick frequency decrease at an initial stage and a subsequent slower frequency decrease for several hours, indicating multilayered adsorption of PhaR molecules onto cr-P(3HB). The initial rapid adsorption, which corresponds to direct adsorption of PhaR molecules onto a bare surface of cr-P(3HB), was a diffusion-controlled process. Strong interactions between PhaR and cr-P(3HB) were also observed as apparently irreversible adsorption. The comparative QCM measurement of PhaR adsorption onto various types of polymers with different aliphatic chemical structures revealed that PhaR was adsorbed onto the surfaces of polymers, including cr-P(3HB), mainly by nonspecific hydrophobic interactions. These results illustrate the high affinity and low specificity for adsorption of PhaR to P(3HB).     

Synthesis of short-/medium-chain-length poly(hydroxyalkanoate) blends by mixed culture fermentation of glycerol

Glycerol was used as a substrate in the bio-production of poly(hydroxyalkanoates) (PHAs) in an effort to establish an alternative outlet for glycerol and produce value-added products. Pseudomonas oleovorans NRRL B-14682 and Pseudomonas corrugata 388 grew and synthesized poly(3-hydroxybutyrate) (P3HB) and medium-chain-length PHA (mcl-PHA) consisting primarily of 3-hydroxydecanoic acid (C(10:0); 44 +/- 2 mol %) and 3-hydroxydodecenoic acid (C(12:1); 31 +/- 2 mol %), respectively, from glycerol at concentrations up to 5% (v/v). Cellular productivity maximized at 40% for P. oleovorans in 5% (v/v) glycerol and 20% for P. corrugata in 2% (v/v) glycerol after 72 h. Increasing the glycerol media concentration from 1% to 5% (v/v) caused a 61% and 72% reduction in the molar mass (M(n)) of the P3HB and mcl-PHA polymers, respectively. Proton-NMR analysis of the glycerol-derived P3HB revealed that the M(n) decrease was the result of esterification of glycerol onto the polymer in a chain terminating position. However, no evidence of glycerol-based chain termination was present in the mcl-PHA. The growth patterns of P. oleovorans and P. corrugata on glycerol permitted their use as mixed cultures to produce natural blends of P3HB and mcl-PHA. By incorporating a staggered inoculation pattern and varying the duration of the fermentations, P3HB/mcl-PHA ratios were achieved that varied from 34:66 to 96:4.     

Biosynthesis of enantiopure (S)-3-hydroxybutyric acid in metabolically engineered Escherichia coli

A biosynthetic pathway for the production of (S)-3-hydroxybutyric acid (S3HB) from glucose was established in recombinant Escherichia coli by introducing the beta-ketothiolase gene from Ralstonia eutropha H16, the (S)-3-hydroxybutyryl-CoA dehydrogenase gene from R. eutropha H16, or Clostridium acetobutylicum ATCC824, and the 3-hydroxyisobutyryl-CoA hydrolase gene from Bacillus cereus ATCC14579. Artificial operon consisting of these genes was constructed and was expressed in E. coli BL21 (DE3) codon plus under T7 promoter by isopropyl beta-D: -thiogalactoside (IPTG) induction. Recombinant E. coli BL21 (DE3) codon plus expressing the beta-ketothiolase gene, the (S)-3-hydroxybutyryl-CoA dehydrogenase gene, and the 3-hydroxyisobutyryl-CoA hydrolase gene could synthesize enantiomerically pure S3HB to the concentration of 0.61 g l(-1) from 20 g l(-1) of glucose in Luria-Bertani medium. Fed-batch cultures of recombinant E. coli BL21 (DE3) codon plus were carried out to achieve higher titer of S3HB with varying induction time and glucose concentration during fermentation. Protein expression was induced by addition of 1 mM IPTG when cell concentration reached 10 and 20 g l(-1) (OD(600) = 30 and 60), respectively. When protein expression was induced at 60 of OD(600) and glucose was fed to the concentration of 15 g l(-1), 10.3 g l(-1) of S3HB was obtained in 38 h with the S3HB productivity of 0.21 g l(-1)h(-1). Lowering glucose concentration to 5 g l(-1) and induction of protein expression at 30 of OD(600) significantly reduced final S3HB concentration to 3.7 g l(-1), which also resulted in the decrease of the S3HB productivity to 0.05 g l(-1)h(-1).     

A repressor protein,PhaR, regulates polyhydroxyalkanoate (PHA) synthesis via its direct interaction with PHA

Phasins (PhaP) are predominantly polyhydroxyalkanoate (PHA) granule-associated proteins that positively affect PHA synthesis. Recently, we reported that the phaR gene, which is located downstream of phaP in Paracoccus denitrificans, codes for a negative regulator involved in PhaP expression. In this study, DNase I footprinting revealed that PhaR specifically binds to two regions located upstream of phaP and phaR, suggesting that PhaR plays a role in the regulation of phaP expression as well as autoregulation. Many TGC-rich sequences were found in upstream elements recognized by PhaR. PhaR in the crude lysate of recombinant Escherichia coli was able to rebind specifically to poly[(R)-3-hydroxybutyrate] [P(3HB)] granules. Furthermore, artificial P(3HB) granules and 3HB oligomers caused the dissociation of PhaR from PhaR-DNA complexes, but native PHA granules, which were covered with PhaP or other nonspecific proteins, did not cause the dissociation. These results suggest that PhaR is able to sense both the onset of PHA synthesis and the enlargement of the granules through direct binding to PHA. However, free PhaR is probably unable to sense the mature PHA granules which are already covered sufficiently with PhaP and/or other proteins. An in vitro expression experiment revealed that phaP expression was repressed by the addition of PhaR and was derepressed by the addition of P(3HB). Based on these findings, we present here a possible model accounting for the PhaR-mediated mechanism of PHA synthesis. Widespread distribution of PhaR homologs in short-chain-length PHA-producing bacteria suggests a common and important role of PhaR-mediated regulation of PHA synthesis.     

Biosynthetic polyesters consisting of 2-hydroxyalkanoic acids: current challenges and unresolved questions

2-Hydroxyalkanoates (2HAs) have become the new monomeric constituents of bacterial polyhydroxyalkanoates (PHAs). PHAs containing 2HA monomers, lactate (LA), glycolate (GL), and 2-hydroxybutyrate (2HB) can be synthesized by engineered microbes in which the broad substrate specificities of PHA synthase and propionyl-CoA transferase are critical factors for the incorporation of the monomers into the polymer chain. LA-based polymers, such as P[LA-co-3-hydroxybutyrate (3HB)], have the properties of pliability and stretchiness which are distinctly different from those of the rigid poly(lactic acid) (PLA) and P(3HB) homopolymers. This versatile platform is also applicable to the biosynthesis of GL- and 2HB-based polymers. In the case of the synthesis of 2HB-based polymers, the enantiospecificity of PHA synthase enabled the production of isotactic (R)-2HB-based polymers, including P[(R)-2HB], from racemic precursors of 2HB. P(2HB) is a pliable material, in contrast to PLA. Furthermore, to obtain a new 2HA-polymerizing PHA synthase, the class I PHA synthase from Ralstonia eutropha was engineered so as to achieve the first incorporation of LA units. The analysis of the polymer synthesized using this new LA-polymerizing PHA synthase unexpectedly focused a spotlight on the studies on block copolymer biosynthesis.     

Adsorption characteristics of P(3HB) depolymerase as evaluated by surface plasmon resonance and atomic force microscopy

Molecular recognition of poly[(R)-3-hydroxybutyrate] (P(3HB)) depolymerase from Ralstonia pickettii T1 to the surfaces of biodegradable aliphatic polyesters such as P(3HB) and poly(L-lactic acid) (PLLA) was examined from the viewpoints of kinetics and dynamics. To determine the kinetic parameters on the interaction between the substrate-binding domain (SBD) of P(3HB) depolymerase and various polymer substrates with different chemical structures, surface plasmon resonance (SPR) measurements were performed. On the other hand, using an atomic force microscopic (AFM) cantilever tip functionalized with the SBD of P(3HB) depolymerase, the mechanical parameters such as unbinding force to the polymer surfaces were measured. Both the SPR and AFM measurements showed that the SBD has a high affinity to P(3HB) and PLLA. From the results of kinetics and dynamics, the energy potential landscape of SBD-polymer interaction was disclosed on the basis of a phenomenological model, and the mechanism of the interaction was discussed.     

Properties and biodegradability of ultra-high-molecular-weight poly[(R)-hydroxybutyrate] produced by a recombinant Escherichia coli.

Ultra-high-molecular-weight poly[(R)-3-hydroxybutyrate] (P(3HB)) (Mw = 3-11 x 10(6)) was produced from glucose by a recombinant Escherichia coli XL1-Blue (pSYL105) harboring Ralstonia eutropha H16 polyhydroxyalkanoate (PHA) biosynthesis genes. Morphology of ultra-high-molecular-weight P(3HB) granules in the recombinant cells was studied by transmission electron microscopy. The recombinant E. coli contained several P(3HB) granules within a cell. Freeze-fracture morphology of ultra-high-molecular-weight P(3HB) granules showed the needle-type as that of P(3HB) granules in R. eutropha. Both the P(3HB) granules in wet cells and wet native granules isolated from the recombinant cells proved to be amorphous on the X-ray diffraction patterns. Mechanical properties of ultra-high-molecular-weight P(3HB) films were markedly improved by stretching over 400%, resulting from high crystallinity and highly oriented crystal regions. Biodegradability of the films of ultra-high-molecular-weight P(3HB) was tested with an extracellular polyhydroxybutyrate depolymerase from Alcaligenes faecalis T1. The rate of enzymatic erosion of P(3HB) films was not dependent of the molecular weight but was dependent of the crystallinity. In addition, it is demonstrated that all ultra-high-molecular-weight P(3HB) films were completely degraded at 25 degrees C in a natural river freshwater within 3 weeks.     

Extracellular poly(hydroxyalkanoate) depolymerases and their inhibitor from Pseudomonas lemoignei.

Enzymatic degradation processes of microbial copolyesters, poly(3-hydroxybutyrate-co-3-hydroxyvalerate): P(3HB-co-3HV) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate): P(3HB-co-4HB), were studied by the weight loss (erosion) of copolyester films. These studies employed three extracellular depolymerases which degrade poly(3-hydroxybutyrate): P(3HB). Two enzymes were purified from the culture supernatant of Pseudomonas lemoignei and one from Alcaligenes faecalis T1. The rate of enzymatic degradation of microbial copolyester films with various compositions showed an almost similar tendency to three different P(3HB) depolymerases, and decreased in the following order: P(3HB-co-4HB) greater than P(3HB) greater than P(3HB-co-3HV). An inhibitory protein of P(3HB) depolymerases in the succinate culture medium of P. lemoignei was isolated and characterized. The molecular weight of P(3HB) depolymerase inhibitor was 35,000 as determined by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulphate. This inhibitor of a single polypeptide chain may reversibly bind the serine residues at the active site of P(3HB) depolymerase. This inhibitory protein was not induced in the culture medium when P. lemoignei was grown on P(3HB) as the sole carbon source.     

Viscoelastic relaxations and thermal properties of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate)

3-Hydroxybutyrate-3-hydroxyvalerate (3HB-3HV) as well as 3-hydroxybutyrate-4-hydroxybutyrate (3HB-4HB) copolyesters have been investigated by differential scanning calorimetry, thermogravimetric analysis and dynamic mechanical spectroscopy, over a wide range of compositions (0-95 mol% 3HV; 0-82 mol% 4HB). Both series of isolated copolyesters are partially crystalline at all compositions. Quenched samples show a glass transition that decreases linearly with increasing co-monomer molar fraction, more markedly when the co-monomer is 4HB. Above Tg, all copolyesters, rich in 3HB units, show a cold crystallization phenomenon followed by melting, while at the other end crystallization on heating is observed only in 3HB-3HV copolymers. The viscoelastic spectrum, strongly affected by thermal history, shows two relaxation regions: the glass transition, whose location depends on copolymer type and composition, and a secondary dispersion region at low temperatures (-130/-80 degrees C). The latter results from a water-related relaxation analogous to that of P(3HB) and, in 3HB-4HB copolymers, from another overlapping absorption peak centered at -130 degrees C, attributed to local motion of the methylene groups in the linear 4HB units.     

Biosynthesis and mobilization of poly(3-hydroxybutyrate) [P(3HB)] by Spirulina platensis

Three strains of Spirulina platensis isolated from different locations showed capability of synthesizing poly(3-hydroxybutyrate) [P(3HB)] under nitrogen-starved conditions with a maximum accumulation of up to 10 wt.% of the cell dry weight (CDW) under mixotrophic culture conditions. Intracellular degradation (mobilization) of P(3HB) granules by S. platensis was initiated by the restoration of nitrogen source. This mobilization process was affected by both illumination and culture pH. The mobilization of P(3HB) was better under illumination (80% degradation) than in dark conditions (40% degradation) over a period of 4 days. Alkaline conditions (pH 10-11) were optimal for both biosynthesis and mobilization of P(3HB) at which 90% of the accumulated P(3HB) was mobilized. Transmission electron microscopy (TEM) revealed that the mobilization of P(3HB) involved changes in granule quantity and morphology. The P(3HB) granules became irregular in shape and the boundary region was less defined. In contrast to bacteria, in S. platensis the intracellular mobilization of P(3HB) seems to be faster than the biosynthesis process. This is because in cyanobacteria chlorosis delays the P(3HB) accumulation process.     

Effective discrimination of antimalarial potency of artemisinin compounds based on quantum chemical calculations of their reaction mechanism

The reaction mechanism of 12 antimalarial artemisinin compounds with two competitive pathways was studied by means of quantum chemical calculations using the IMOMO(B3LYP/6-31(d,p):HF/3-21G) method. The oxygen-centered radicals, carbon-centered radicals, and transition states (TS) in both pathways were geometrically optimized. The obtained kinetic and thermodynamic energy profiles show that homolytic C-C cleavage reaction (pathway 2) is energetically more preferable than an intramolecular 1,5-hydrogen shift process (pathway 1), which is consistent with the docking calculations. However, compounds that can easily proceed along the pathway 1 have high activity. Therefore, both pathways are important for antimalarial activity. Moreover, effective discrimination between high and low activity compounds using EA1, deltaE1, and deltaE(1A-2A) was accomplished.     

Rearrangement of gene order in the phaCAB operon leads to effective production of ultrahigh-molecular-weight poly[(R)-3-hydroxybutyrate] in genetically engineered Escherichia coli

Ultrahigh-molecular-weight poly[(R)-3-hydroxybutyrate] [UHMW-P(3HB)] synthesized by genetically engineered Escherichia coli is an environmentally friendly bioplastic material which can be processed into strong films or fibers. An operon of three genes (organized as phaCAB) encodes the essential proteins for the production of P(3HB) in the native producer, Ralstonia eutropha. The three genes of the phaCAB operon are phaC, which encodes the polyhydroxyalkanoate (PHA) synthase, phaA, which encodes a 3-ketothiolase, and phaB, which encodes an acetoacetyl coenzyme A (acetoacetyl-CoA) reductase. In this study, the effect of gene order of the phaCAB operon (phaABC, phaACB, phaBAC, phaBCA, phaCAB, and phaCBA) on an expression plasmid in genetically engineered E. coli was examined in order to determine the best organization to produce UHMW-P(3HB). The results showed that P(3HB) molecular weights and accumulation levels were both dependent on the order of the pha genes relative to the promoter. The most balanced production result was achieved in the strain harboring the phaBCA expression plasmid. In addition, analysis of expression levels and activity for P(3HB) biosynthesis enzymes and of P(3HB) molecular weight revealed that the concentration of active PHA synthase had a negative correlation with P(3HB) molecular weight and a positive correlation with cellular P(3HB) content. This result suggests that the level of P(3HB) synthase activity is a limiting factor for producing UHMW-P(3HB) and has a significant impact on P(3HB) production.     

Biosynthesis and native granule characteristics of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in Delftia acidovorans

The ability of Delftia acidovorans to incorporate a broad range of 3-hydroxyvalerate (3HV) monomers into polyhydroxyalkanoate (PHA) copolymers was evaluated in this study. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] containing 0–90 mol% of 3HV was obtained when a mixture of sodium 3-hydroxybutyrate and sodium valerate was used as the carbon sources. Transmission electron microscopy analysis revealed an interesting aspect of the P(3HB-co-3HV) granules containing high molar ratios of 3HV whereby, the copolymer granules were generally larger than those of poly(3-hydroxybutyrate) [P(3HB)] granules, despite having almost the same cellular PHA contents. The large number of P(3HB-co-3HV) granules occupying almost the entire cell volume did not correspond to a higher amount of polymer by weight. This indicated that the granules of P(3HB-co-3HV) contain polymer chains that are loosely packed and therefore have lower density than P(3HB) granules. It was also interesting to note that a decrease in the length of the side chain from 3HV to 4-hydroxybutyrate (4HB) corresponded to an increase in the density of the respective PHA granules. The presence of longer side chain monomers (3HV) in the PHA structure seem to exhibit steric effects that prevent the polymer chains in the granules from being closely packed. The results reported here have important implications on the maximum ability of bacterial cells to accumulate PHA containing monomers with longer side chain length.