A High‐Energy Density Asymmetric Supercapacitor Based on Fe2O3 Nanoneedle Arrays and NiCo2O4/Ni(OH)2 Hybrid Nanosheet Arrays Grown on SiC Nanowire Networks as Free‐Standing Advanced Electrodes

In this paper, a novel freestanding core‐branch negative and positive electrode material through integrating trim aligned Fe₂O₃ nanoneedle arrays (Fe₂O₃ NNAs) is first proposed with typical mesoporous structures and NiCo₂O₄/Ni(OH)₂ hybrid nanosheet arrays (NiCo₂O₄/Ni(OH)₂ HNAs) on SiC nanowire (SiC NW) skeletons with outstanding resistance to oxidation and corrosion, good conductivity, and large‐specific surface area. The original built SiC NWs@Fe₂O₃ NNAs is validated to be a highly capacitive negative electrode (721 F g^?1 at 2 A g^?1, i.e., 1 F cm^?2 at 2.8 mA cm^?2), matching well with the similarly constructed SiC NWs@NiCo₂O₄/Ni(OH)₂ HNAs positive electrode (2580 F g^?1 at 4 A g^?1, i.e., 3.12 F cm^?2 at 4.8 mA cm^?2). Contributed by the uniquely engineered electrodes, a high‐performance asymmetric supercapacitor (ASC) is developed, which can exhibit a maximum energy density of 103 W h kg^?1 at a power density of 3.5 kW kg^?1, even when charging the device within 6.5 s, the energy density can still maintain as high as 45 W h kg^?1 at 26.1 kW kg^?1, and the ASC manifests long cycling lifespan with 86.6% capacitance retention even after 5000 cycles. This pioneering work not only offers an attractive strategy for rational construction of high‐performance SiC NW‐based nanostructured electrodes materials, but also provides a fresh route for manufacturing next‐generation high‐energy storage and conversion systems.     

Citrate‐Assisted Growth of NiCo2O4 Nanosheets on Reduced Graphene Oxide for Highly Reversible Lithium Storage

Hybrid nanostructures based on graphene and transition metal oxides hold great promise as high‐performance electrode materials for next‐generation lithium‐ion batteries. In this work, the rational design and fabrication of NiCo₂O₄ nanosheets supported on reduced graphene oxide (denoted as rGO/NiCo₂O₄) is presented as a novel anode material for highly efficient and reversible lithium storage. A solution method is applied to grow Ni‐Co precursor nanosheets on rGO, in which the addition of trisodium citrate is found crucial to guide the formation of uniform Ni‐Co precursor nanosheets. Subsequent thermal treatment results in formation of crystalline NiCo₂O₄ nanosheets on rGO without damaging the morphology. The interconnected NiCo₂O₄ nanosheets form hierarchically porous films on both sides of rGO. Such a hybrid nanostructure would effectively promote the charge transport and withstand volume variation upon prolonged charge/discharge cycling. As a result, the rGO/NiCo₂O₄ nanocomposite demonstrates high reversible capacities of 954.3 and 656.5 mAh g^–1 over 50 cycles at current densities of 200 and 500 mA g^–1 respectively, and remarkable capacity retention at increased current densities.     

H2V3O8 Nanowire/Graphene Electrodes for Aqueous Rechargeable Zinc Ion Batteries with High Rate Capability and Large Capacity

Aqueous rechargeable zinc ion batteries are considered a promising candidate for large‐scale energy storage owing to their low cost and high safety nature. A composite material comprised of H₂V₃O₈ nanowires (NWs) wrapped by graphene sheets and used as the cathode material for aqueous rechargeable zinc ion batteries is developed. Owing to the synergistic merits of desirable structural features of H₂V₃O₈ NWs and high conductivity of the graphene network, the H₂V₃O₈ NW/graphene composite exhibits superior zinc ion storage performance including high capacity of 394 mA h g^?1 at 1/3 C, high rate capability of 270 mA h g^?1 at 20 C and excellent cycling stability of up to 2000 cycles with a capacity retention of 87%. The battery offers a high energy density of 168 W h kg^?1 at 1/3 C and a high power density of 2215 W kg^?1 at 20 C (calculated based on the total weight of H₂V₃O₈ NW/graphene composite and the theoretically required amount of Zn). Systematic structural and elemental characterization confirm the reversible Zn²⁺ and water cointercalation electrochemical reaction mechanism. This work brings a new prospect of designing high‐performance aqueous rechargeable zinc ion batteries for grid‐scale energy storage.     

NiCo2S4 Nanosheets Grown on Nitrogen‐Doped Carbon Foams as an Advanced Electrode for Supercapacitors

To push the energy density limit of supercapacitors, a new class of electrode materials with favorable architectures is strongly needed. Binary metal sulfides hold great promise as an electrode material for high‐performance energy storage devices because they offer higher electrochemical activity and higher capacity than mono‐metal sulfides. Here, the rational design and fabrication of NiCo₂S₄ nanosheets supported on nitrogen‐doped carbon foams (NCF) is presented as a novel flexible electrode for supercapacitors. A facile two‐step method is developed for growth of NiCo₂S₄ nanosheets on NCF with robust adhesion, involving the growth of Ni‐Co precursor and subsequent conversion into NiCo₂S₄ nanosheets through sulfidation process. Benefiting from the compositional features and 3D electrode architectures, the NiCo₂S₄/NCF electrode exhibits greatly improved electrochemical performance with ultrahigh capacitance (877 F g^?1 at 20 A g^?1) and excellent cycling stability. Moreover, a binder‐free asymmetric supercapacitor device is also fabricated by using NiCo₂S₄/NCF as the positive electrode and ordered mesoporous carbon (OMC)/NCF as the negative electrode; this demonstrates high energy density (≈45.5 Wh kg^?1 at 512 W kg^?1).     

Hierarchical Zn–Co–S Nanowires as Advanced Electrodes for All Solid State Asymmetric Supercapacitors

A facile two‐step strategy is developed to design the large‐scale synthesis of hierarchical, unique porous architecture of ternary metal hydroxide nanowires grown on porous 3D Ni foam and subsequent effective sulfurization. The hierarchical Zn–Co–S nanowires (NWs) arrays are directly employed as an electrode for supercapacitors application. The as‐synthesized Zn–Co–S NWs deliver an ultrahigh areal capacity of 0.9 mA h cm^?2 (specific capacity of 366.7 mA h g^?1) at a current density of 3 mA cm^?2, with an exceptional rate capability (≈227.6 mA h g^?1 at a very high current density of 40 mA cm^?2) and outstanding cycling stability (≈93.2% of capacity retention after 10 000 cycles). Most significantly, the assembled Zn–Co–S NWs//Fe₂O₃@reduced graphene oxide asymmetric supercapacitors with a wide operating potential window of ≈1.6 V yield an ultrahigh volumetric capacity of ≈1.98 mA h cm^?3 at a current density of 3 mA cm^?2, excellent energy density of ≈81.6 W h kg^?1 at a power density of ≈559.2 W kg^?1, and exceptional cycling performance (≈92.1% of capacity retention after 10 000 cycles). This general strategy provides an alternative to design the other ternary metal sulfides, making it facile, free‐standing, binder‐free, and cost‐effective ternary metal sulfide‐based electrodes for large‐scale applications in modern electronics.     

3D Printing of Tunable Energy Storage Devices with Both High Areal and Volumetric Energy Densities

Developing advanced supercapacitors with both high areal and volumetric energy densities remains challenging. In this work, self‐supported, compact carbon composite electrodes are designed with tunable thickness using 3D printing technology for high‐energy‐density supercapacitors. The 3D carbon composite electrodes are composed of the closely stacked and aligned active carbon/carbon nanotube/reduced graphene oxide (AC/CNT/rGO) composite filaments. The AC microparticles are uniformly embedded in the wrinkled CNT/rGO conductive networks without using polymer binders, which contributes to the formation of abundant open and hierarchical pores. The 3D‐printed ultrathick AC/CNT/rGO composite electrode (ten layers) features high areal and volumetric mass loadings of 56.9 mg cm^?2 and 256.3 mg cm^?3, respectively. The symmetric cell assembled with the 3D‐printed thin GO separator and ultrathick AC/CNT/rGO electrodes can possess both high areal and volumetric capacitances of 4.56 F cm^?2 and 10.28 F cm^?3, respectively. Correspondingly, the assembled ultrathick and compact symmetric cell achieves high areal and volumetric energy densities of 0.63 mWh cm^?2 and 1.43 mWh cm^?3, respectively. The all‐component extrusion‐based 3D printing offers a promising strategy for the fabrication of multiscale and multidimensional structures of various high‐energy‐density electrochemical energy storage devices.     

Ultrathin and Porous Ni3S2/CoNi2S4 3D‐Network Structure for Superhigh Energy Density Asymmetric Supercapacitors

3D‐networked, ultrathin, and porous Ni₃S₂/CoNi₂S₄ on Ni foam (NF) is successfully designed and synthesized by a simple sulfidation process from 3D Ni–Co precursors. Interestingly, the edge site‐enriched Ni₃S₂/CoNi₂S₄/NF 3D‐network is realized by the etching‐like effect of S^2? ions, which made the surfaces of Ni₃S₂/CoNi₂S₄/NF with a ridge‐like feature. The intriguing structural/compositional/componental advantages endow 3D‐networked‐free‐standing Ni₃S₂/CoNi₂S₄/NF electrodes better electrochemical performance with specific capacitance of 2435 F g^?1 at a current density of 2 A g^?1 and an excellent rate capability of 80% at 20 A g^?1. The corresponding asymmetric supercapacitor achieves a high energy density of 40.0 W h kg^?1 at an superhigh power density of 17.3 kW kg^?1, excellent specific capacitance (175 F g^?1 at 1A g^?1), and electrochemical cycling stability (92.8% retention after 6000 cycles) with Ni₃S₂/CoNi₂S₄/NF as the positive electrode and activated carbon/NF as the negative electrode. Moreover, the temperature dependences of cyclic voltammetry curve polarization and specific capacitances are carefully investigated, and become more obvious and higher, respectively, with the increase of test temperature. These can be attributed to the components' synergetic effect assuring rich redox reactions, high conductivity as well as highly porous but robust architectures. This work provides a general, low‐cost route to produce high performance electrode materials for portable supercapacitor applications on a large scale.     

Rational Design of Metal‐Organic Framework Derived Hollow NiCo2O4 Arrays for Flexible Supercapacitor and Electrocatalysis

Metal‐organic frameworks (MOFs) are promising porous precursors for the construction of various functional materials for high‐performance electrochemical energy storage and conversion. Herein, a facile two‐step solution method to rational design of a novel electrode of hollow NiCo₂O₄ nanowall arrays on flexible carbon cloth substrate is reported. Uniform 2D cobalt‐based wall‐like MOFs are first synthesized via a solution reaction, and then the 2D solid nanowall arrays are converted into hollow and porous NiCo₂O₄ nanostructures through an ion‐exchange and etching process with an additional annealing treatment. The as‐obtained NiCo₂O₄ nanostructure arrays can provide rich reaction sites and short ion diffusion path. When evaluated as a flexible electrode material for supercapacitor, the as‐fabricated NiCo₂O₄ nanowall electrode shows remarkable electrochemical performance with excellent rate capability and long cycle life. In addition, the hollow NiCo₂O₄ nanowall electrode exhibits promising electrocatalytic activity for oxygen evolution reaction. This work provides an example of rational design of hollow nanostructured metal oxide arrays with high electrochemical performance and mechanical flexibility, holding great potential for future flexible multifunctional electronic devices.     

Direct Growth of Flower‐Like δ‐MnO2 on Three‐Dimensional Graphene for High‐Performance Rechargeable Li‐O2 Batteries

A challenge still remains to develop high‐performance and cost‐effective air electrode for Li‐O₂ batteries with high capacity, enhanced rate capability and long cycle life (100 times or above) despite recent advances in this field. In this work, a new design of binder‐free air electrode composed of three‐dimensional (3D) graphene (G) and flower‐like δ‐MnO₂ (3D‐G‐MnO₂) has been proposed. In this design, graphene and δ‐MnO₂ grow directly on the skeleton of Ni foam that inherits the interconnected 3D scaffold of Ni foam. Li‐O₂ batteries with 3D‐G‐MnO₂ electrode can yield a high discharge capacity of 3660 mAh g^?1 at 0.083 mA cm^?2. The battery can sustain 132 cycles at a capacity of 492 mAh g^?1 (1000 mAh g_carbon ^?1) with low overpotentials under a high current density of 0.333 mA cm^?2. A high average energy density of 1350 Wh Kg^?1 is maintained over 110 cycles at this high current density. The excellent catalytic activity of 3D‐G‐MnO₂ makes it an attractive air electrode for high‐performance Li‐O₂ batteries.     

NiCo2O4 Nanofibers as Carbon‐Free Sulfur Immobilizer to Fabricate Sulfur‐Based Composite with High Volumetric Capacity for Lithium–Sulfur Battery

Both the energy density and cycle stability are still challenges for lithium–sulfur (Li–S) batteries in future practical applications. Usually, light‐weight and nonpolar carbon materials are used as the hosts of sulfur, however they struggle on the cycle stability and undermine the volumetric energy density of Li–S batteries. Here, heavy NiCo₂O₄ nanofibers as carbon‐free sulfur immobilizers are introduced to fabricate sulfur‐based composites. NiCo₂O₄ can accelerate the catalytic conversion kinetics of soluble intermediate polysulfides by strong chemical interaction, leading to a good cycle stability of sulfur cathodes. Specifically, the S/NiCo₂O₄ composite presents a high gravimetric capacity of 1125 mAh g^?1 at 0.1 C rate with the composite as active material, and a low fading rate of 0.039% per cycle over 1500 cycles at 1 C rate. In particular, the S/NiCo₂O₄ composite with the high tap density of 1.66 g cm^?3 delivers large volumetric capacity of 1867 mAh cm^?3, almost twice that of the conventional S/carbon composites.     

Rational Design of Hierarchically Open‐Porous Spherical Hybrid Architectures for Lithium‐Ion Batteries

Controlling the internal microstructure and overall morphology of building blocks used to form hybrid materials is crucial for the realization of deterministically designed architectures with desirable properties. Here, integrative spray‐frozen (SF) assembly is demonstrated for forming hierarchically structured open‐porous microspheres (hpMSs) composed of Fe₃O₄ and reduced graphene oxide (rGO). The SF process drives the formation of a radially aligned microstructure within the sprayed colloidal droplets and also controls the overall microsphere morphology. The spherical Fe₃O₄/rGO hpMSs contain interconnected open pores, which, when used as a lithium‐ion battery anode, enables them to provide gravimetric and volumetric capacities of 1069.7 mAh g^?1 and 686.7 mAh cm^?3, much greater than those of samples with similar composition and different morphologies. The hpMSs have good rate and cycling performance, retaining 78.5% capacity from 100 to 1000 mA g^?1 and 74.6% capacity over 300 cycles. Using in situ synchrotron X‐ray absorption spectroscopy, the reaction pathway and phase evolution of the hpMSs are monitored enabling observation of the very small domain size and highly disordered nature of Fe_xO_y. The reduced capacity fade relative to other conversion systems is due to the good electrical contact between the pulverized Fe_xO_y particles and rGO, the overall structural integrity of the hpMSs, and the interconnected open porosity.     

SrTiO3/Al2O3‐Graphene Electron Transport Layer for Highly Stable and Efficient Composites‐Based Perovskite Solar Cells with 20.6% Efficiency

For practical use of perovskite solar cells (PSCs) the instability issues of devices, attributed to degradation of perovskite molecules by moisture, ions migration, and thermal‐ and light‐instability, have to be solved. Herein, highly efficient and stable PSCs based on perovskite/Ag‐reduced graphene oxide (Ag‐rGO) and mesoporous Al₂O₃/graphene (mp‐AG) composites are reported. The mp‐AG composite is conductive with one‐order of magnitude higher mobility than mp‐TiO₂ and used for electron transport layer (ETL). Compared to the mp‐TiO₂ ETL based cells, the champion device based on perovskite/Ag‐rGO and SrTiO₃/mp‐AG composites shows overall a best performance (i.e., V_OC = 1.057 V, J_SC = 25.75 mA cm^?2, fill factor (FF) = 75.63%, and power conversion efficiency (PCE) = 20.58%). More importantly, the champion device without encapsulation exhibits not only remarkable thermal‐ and photostability but also long‐term stability, retaining 97–99% of the initial values of photovoltaic parameters and sustaining ≈93% of initial PCE over 300 d under ambient conditions.     

Interconnected Frameworks with a Sandwiched Porous Carbon Layer/Graphene Hybrids for Supercapacitors with High Gravimetric and Volumetric Performances

A facile approach to synthesize porous disordered carbon layers as energy storage units coating on graphene sheets to form interconnected frameworks by one‐step pyrolysis of the mixture of graphene oxide/polyaniline and KOH is presented. As effective energy storage units, these porous carbon layers play an important role in enhancing the electrochemical performances. The obtained porous carbon material exhibits a high specific surface area (2927 m² g^?1), hierarchical interconnected pores, moderate pore volume (1.78 cm³ g^?1), short ion diffusion paths, and a high nitrogen level (6 at%). It displays both unparalleled gravimetric (481 F g^?1) and outstanding volumetric capacitance (212 F cm^?3) in an aqueous electrolyte. More importantly, the assembled symmetrical supercapacitor delivers not only high gravimetric (25.7 Wh kg^?1 based on total mass of electroactive materials) but also high volumetric energy densities (11.3 Wh L^?1) in an aqueous electrolyte. Furthermore, the assembled asymmetric supercapacitor yields a maximum energy density up to 88 Wh kg^?1, which is, to the best of our knowledge, the highest value so far reported for carbon//MnO₂ asymmetric supercapacitors in aqueous electrolytes. Therefore, this novel carbon material holds great promise for potential applications in energy‐related technological fields.     

A Ternary Fe1−xS@Porous Carbon Nanowires/Reduced Graphene Oxide Hybrid Film Electrode with Superior Volumetric and Gravimetric Capacities for Flexible Sodium Ion Batteries

Smart construction of ultraflexible electrodes with superior gravimetric and volumetric capacities is still challenging yet significant for sodium ion batteries (SIBs) toward wearable electronic devices. Herein, a hybrid film made of hierarchical Fe_1?xS‐filled porous carbon nanowires/reduced graphene oxide (Fe_1?xS@PCNWs/rGO) is synthesized through a facile assembly and sulfuration strategy. The resultant hybrid paper exhibits high flexibility and structural stability. The multidimensional paper architecture possesses several advantages, including rendering an efficient electron/ion transport network, buffering the volume expansion of Fe_1?xS nanoparticles, mitigating the dissolution of polysulfides, and enabling superior kinetics toward efficient sodium storage. When evaluated as a self‐supporting anode for SIBs, the Fe_1?xS@PCNWs/rGO paper electrode exhibits remarkable reversible capacities of 573–89 mAh g^?1 over 100 consecutive cycles at 0.1 A g^?1 with areal mass loadings of 0.9–11.2 mg cm^?2 and high volumetric capacities of 424–180 mAh cm^?3 in the current density range of 0.2–5 A g^?1. More competitively, a SIB based on this flexible Fe_1?xS@PCNWs/rGO anode demonstrates outstanding electrochemical properties, thus highlighting its enormous potential in versatile flexible and wearable applications.     

A High‐Power Na3V2(PO4)3‐Bi Sodium‐Ion Full Battery in a Wide Temperature Range

Sodium‐ion batteries (SIBs) that operate in a wide temperature range are in high demand for practical large‐scale electric energy storage. Herein, a novel full SIB is composed of a bulk Bi anode, a Na₃V₂(PO₄)₃/carbon nanotubes composite (NVP‐CNTs) cathode and a NaPF₆‐diglyme electrolyte. The Bi anode gradually evolves into a porous network in the ether‐based electrolyte during initial cycles, and in the NVP‐CNTs cathode the NVP is cross linked by CNTs to show large exchange current density. These unique features merit the full SIB of Bi//NVP‐CNTs with high Na⁺ diffusion coefficient and low reaction activation energy, and hence fast Na⁺ transport and facile redox reaction kinetics. The resultant full SIB presents high power density of 2354.6 W kg^?1 and energy density of 150 Wh kg^?1 and superior cycling stability in a wide temperature range from ?15 to 45 °C. This will shed light on battery design, and promote their development for practical applications in various weather conditions.     

NiCoFe‐Layered Double Hydroxides/N‐Doped Graphene Oxide Array Colloid Composite as an Efficient Bifunctional Catalyst for Oxygen Electrocatalytic Reactions

Ternary NiCoFe‐layered double hydroxide (NiCo^IIIFe‐LDH) with Co³⁺ is grafted on nitrogen‐doped graphene oxide (N‐GO) by an in situ growth route. The array‐like colloid composite of NiCo^IIIFe‐LDH/N‐GO is used as a bifunctional catalyst for both oxygen evolution/reduction reactions (OER/ORR). The NiCo^IIIFe‐LDH/N‐GO array has a 3D open structure with less stacking of LDHs and an enlarged specific surface area. The hierarchical structure design and novel material chemistry endow high activity propelling O₂ redox. By exposing more amounts of Ni and Fe active sites, the NiCo^IIIFe‐LDH/N‐GO illustrates a relatively low onset potential (1.41 V vs reversible hydrogen electrode) in 0.1 mol L^?1 KOH solution under the OER process. Furthermore, by introducing high valence Co³⁺, the onset potential of this material in ORR is 0.88 V. The overvoltage difference is 0.769 V between OER and ORR. The key factors for the excellent bifunctional catalytic performance are believed to be the Co with a high valence, the N‐doping of graphene materials, and the highly exposed Ni and Fe active sites in the array‐like colloid composite. This work further demonstrates the possibility to exploit the application potential of LDHs as OER and ORR bifunctional electrochemical catalysts.     

Ice Templated Free‐Standing Hierarchically WS2/CNT‐rGO Aerogel for High‐Performance Rechargeable Lithium and Sodium Ion Batteries

A hybrid nanoarchitecture aerogel composed of WS₂ nanosheets and carbon nanotube‐reduced graphene oxide (CNT‐rGO) with ordered microchannel three‐dimensional (3D) scaffold structure was synthesized by a simple solvothermal method followed by freeze‐drying and post annealing process. The 3D ordered microchannel structures not only provide good electronic transportation routes, but also provide excellent ionic conductive channels, leading to an enhanced electrochemical performance as anode materials both for lithium‐ion batteries (LIBs) and sodium‐ion batteries (SIBs). Significantly, WS₂/CNT‐rGO aerogel nanostructure can deliver a specific capacity of 749 mA h g^?1 at 100 mA g^?1 and a high first‐cycle coulombic efficiency of 53.4% as the anode material of LIBs. In addition, it also can deliver a capacity of 311.4 mA h g^?1 at 100 mA g^?1, and retain a capacity of 252.9 mA h g^?1 at 200 mA g^?1 after 100 cycles as the anode electrode of SIBs. The excellent electrochemical performance is attributed to the synergistic effect between the WS₂ nanosheets and CNT‐rGO scaffold network and rational design of 3D ordered structure. These results demonstrate the potential applications of ordered CNT‐rGO aerogel platform to support transition‐metal‐dichalcogenides (i.e., WS₂) for energy storage devices and open up a route for material design for future generation energy storage devices.     

High Volumetric Capacitance,Ultralong Life Supercapacitors Enabled by Waxberry‐Derived Hierarchical Porous Carbon Materials

Supercapacitors with fast charge/discharge rate and long cycling stability (>50 000 cycles) are attractive for energy storage and mobile power supply. In this paper, a facile strategy is developed to fabricate an Fe₂O₃/FeS‐decorated N, S‐codoped hierarchical porous carbon hybrid. Its microstructure and compositions can be readily controlled through adjusting the hydrothermal reaction between waxberry and iron sulfate. The constructed supercapacitors with the as‐prepared carbon materials from this reaction are able to exhibit outstanding capacitive performance with a superfast charge/discharge rate (<1 s), ultralong cycle life (>50 000 cycles, 80 A g⁻¹), ultrahigh volumetric capacitance (1320.4 F cm⁻³, 0.1 A g⁻¹), and high energy density (100.9 W h kg⁻¹, 221.9 W h L⁻¹). The outstanding performance makes it one of the best biomass‐derived supercapacitors. The superior capacitive behavior is likely to arise from the N and S codoping on the surface/edge/skeleton of the carbon microspheres and nanosheet composites coupled with the fast redox reaction of Fe₂O₃/FeS. Overall, this research presents a new avenue for developing the next generation of sustainable high‐performance energy storage device.     

Chemically Exfoliating Biomass into a Graphene‐like Porous Active Carbon with Rational Pore Structure,Good Conductivity,and Large Surface Area for High‐Performance Supercapacitors

Active carbons have unique physicochemical properties, but their conductivities and surface to weight ratios are much poorer than graphene. A unique and facile method is innovated to chemically process biomass by “drilling” holes with H₂O₂ and exfoliating into graphene‐like nanosheets with HAc, followed by carbonization at a high temperature for highly graphitized activated carbon with greatly enhanced porosity, unique pore structure, high conductivity, and large surface area. This graphene‐like carbon exhibits extremely high specific capacitance (340 F g^?1 at 0.5 A g^?1) and high specific energy density (23.33 to 16.67 W h kg^?1) with excellent rate capability and long cycling stability (remains 98% after 10 000 cycles), which is much superior to all reported carbons including graphene. Synthesis mechanism for deriving biomass into porous graphene‐like carbons is discussed in detail. The enhancement mechanism for the porous graphene‐like carbon electrode reveals that rationally designed meso‐ and macropores are very critical in porous electrode performance, which can network micropores for diffusion freeways, high conductivity, and high utilization. This work has universal significance in producing highly porous and conductive carbons from biomass including biowastes for various energy storage/conversion applications.     

Hierarchical NiCo2S4@NiO Core–Shell Heterostructures as Catalytic Cathode for Long‐Life Li‐O2 Batteries

The critical challenges of Li‐O₂ batteries lie in sluggish oxygen redox kinetics and undesirable parasitic reactions during the oxygen reduction reaction and oxygen evolution reaction processes, inducing large overpotential and inferior cycle stability. Herein, an elaborately designed 3D hierarchical heterostructure comprising NiCo₂S₄@NiO core–shell arrays on conductive carbon paper is first reported as a freestanding cathode for Li‐O₂ batteries. The unique hierarchical array structures can build up multidimensional channels for oxygen diffusion and electrolyte impregnation. A built‐in interfacial potential between NiCo₂S₄ and NiO can drastically enhance interfacial charge transfer kinetics. According to density functional theory calculations, intrinsic LiO₂‐affinity characteristics of NiCo₂S₄ and NiO play an importantly synergistic role in promoting the formation of large peasecod‐like Li₂O₂, conducive to construct a low‐impedance Li₂O₂/cathode contact interface. As expected, Li‐O₂ cells based on NiCo₂S₄@NiO electrode exhibit an improved overpotential of 0.88 V, a high discharge capacity of 10 050 mAh g^?1 at 200 mA g^?1, an excellent rate capability of 6150 mAh g^?1 at 1.0 A g^?1, and a long‐term cycle stability under a restricted capacity of 1000 mAh g^?1 at 200 mA g^?1. Notably, the reported strategy about heterostructure accouplement may pave a new avenue for the effective electrocatalyst design for Li‐O₂ batteries.