Atomic‐Local Environments of Single‐Atom Catalysts: Synthesis,Electronic Structure,and Activity

Single‐atom catalysts (SACs) hold great promise for maximizing atomic efficiency of supported metals via the ultimate utilization of every single atom. The foreign isolated substitutions anchored on different supports build varieties of local structural centers, changing the physical and chemical properties. Thus, distinct atomic local environments for single‐atom catalysts are essential for determining superior catalytic performance for a wide variety of chemical reactions. The examples of synthesizing single atoms on various supports presented here deepen the understanding of the different structural and electronic properties of SACs, in which the metal single atom does not bind with any other atoms of this metal, but substantially interacts with the support ions. Due to the strong support effects, the ubiquitous aggregation of metal single atoms can be addressed, achieving highly stable SACs. This review discusses recent progress in theoretical electronic effects between atomic dopants and supports, which reveal the electronic structures of various SACs and offers guidance for rational prediction and design of highly stable and reactive SACs. It is argued that tuning this interaction by the selection of the supports toward favorable atomic and electronic structures on the surface should be taken into consideration for the development of more efficient SACs.     

Single‐Atom Catalysts: Emerging Multifunctional Materials in Heterogeneous Catalysis

Supported metal nanoparticles are the most widely investigated heterogeneous catalysts in catalysis community. The size of metal nanostructures is an important parameter in influencing the activity of constructed catalysts. Especially, as coordination unsaturated metal atoms always work as the catalytically active centers, decreasing the particle size of the catalyst can greatly boost the specific activity per metal atom. Single‐atom catalysts (SACs), containing single metal atoms anchored on supports, represent the utmost utilization of metallic catalysts and thus maximize the usage efficiency of metal atom. However, with the decreasing of particle size, the surface free energy increases obviously, and tends to aggregate into clusters or particles. Selection of an appropriate support is necessary to interact with isolated atoms strongly, and thus prevents the movement and aggregation of isolated atoms, creating stable, finely dispersed active sites. Furthermore, with uniform single‐atom dispersion and well‐defined configuration, SACs afford great space for optimizing high selectivity and activity. In this review, a detailed discussion of preparing, characterizing, and catalytically testing within this family is provided, including the theoretical understanding of key aspects of SACs materials. The main advantages of SACs as catalysts and the challenges faced for further improving catalytic performance are also highlighted.     

Oxygen Reduction Reactions on Single‐ or Few‐Atom Discrete Active Sites for Heterogeneous Catalysis

The oxygen reduction reaction (ORR) is of great importance in energy‐converting processes such as fuel cells and in metal–air batteries and is vital to facilitate the transition toward a nonfossil dependent society. The ORR has been associated with expensive noble metal catalysts that facilitate the O₂ adsorption, dissociation, and subsequent electron transfer. Single‐ or few‐atom motifs based on earth‐abundant transition metals, such as Fe, Co, and Mo, combined with nonmetallic elements, such as P, S, and N, embedded in a carbon‐based matrix represent one of the most promising alternatives. Often these are referred to as single atom catalysts; however, the coordination number of the metal atom as well as the type and nearest neighbor configuration has a strong influence on the function of the active sites, and a more adequate term to describe them is metal‐coordinated motifs. Despite intense research, their function and catalytic mechanism still puzzle researchers. They are not molecular systems with discrete energy states; neither can they fully be described by theories that are adapted for heterogeneous bulk catalysts. Here, recent results on single‐ and few‐atom electrocatalyst motifs are reviewed with an emphasis on reports discussing the function and the mechanism of the active sites.     

Structural Regulation and Support Coupling Effect of Single‐Atom Catalysts for Heterogeneous Catalysis

Single atom catalysts (SACs) that integrate the merits of homogeneous and heterogeneous catalysts have been attracting considerable attention in recent years. The individual metal atoms of SACs can be stabilized on supports through various unsaturated chemical sites or space confinement for achieving the maximized atom utilization efficiency. Aside from the development of strategies for preparing high loading and high purity SACs, another key challenge in this field is precisely manipulating the geometric and electronic structure of catalytically active single metal sites, thus rendering the catalysts exceptionally reactive, selective, and stabile compared to their bulk counterparts. This review summarizes recent advancements in SACs for heterogeneous catalysis from the perspective of local structural regulation and the synergistic coupling effect between metal species and supports. Special emphasis is placed on the elucidation of the catalytic structure‐performance relationship in terms of coordination environment, valence state and metal‐support interactions by advanced characterization and theoretical studies. Select in situ or operando characterization techniques for tracking the SACs’ structure evolution under realistic conditions are highlighted. Finally, the challenges and opportunities are discussed to offer insight into the rational design of more intriguing SACs with high activity and distinct chemoselectivity.     

Carbon‐Microcuboid‐Supported Phosphorus‐Coordinated Single Atomic Copper with Ultrahigh Content and Its Abnormal Modification to Na Storage Behaviors

Carbon‐supported single atomic metals (SAMs) have aroused great interest in energy conversion and storage fields. However, metal content has to date, been far below expectation. Additionally, theoretical calculations show that SAMs are superb anchoring sites for alkali metal‐ion storage, but the experimental research remains untouched. Herein, a metal–organophosphine framework derived strategy is proposed to prepare carbon microcuboids‐supported single atomic Cu with a high content of 26.3 wt%. Atomic Cu is stabilized mainly by P moieties, exhibiting robust stability even in concentrated HCl and HNO₃. Interestingly, experimental investigations and first‐principle calculations indicate that Cu atoms can alter the Na storage behavior and enable Na to maintain an ionic state at a fully discharging state for sodium‐ion batteries, which may be a new pathway to mitigate safety concerns of dendrite formation. The Cu atoms also enhance electron transfer and diffusion kinetics. As a result, the carbon cuboids can deliver a high capacity of 107.7 mAh g^?1 at 5 A g^?1 and show a long life of 1000 cycles for Na storage. This strategy offers a new possibility for fabricating high‐content P‐coordinated atomic metals for energy conversion and storage.     

Uniform Lithium Deposition Assisted by Single‐Atom Doping toward High‐Performance Lithium Metal Anodes

For a long time lithium (Li) metal has been considered one of the most promising anodes for next‐generation rechargeable batteries. Despite decades of concentrated research, its practical application is still hindered by dendritic Li deposition and infinite volume change of Li metal anodes. Here, atomically dispersed metals doped graphene is synthesized to regulate Li metal nucleation and guide Li metal deposition. The single‐atom (SA) metals, supported on the nitrogen‐doped graphene can not only increase the Li adsorption energy of the localized area around the metal atomic sites with a moderate adsorption energy gradient but also improve the atomic structural stability of the overall materials by constructing a coordination mode of M‐N_x‐C (M, N, and C denoted as metal, nitrogen, and carbon atoms, respectively). As a result, the as‐obtained electrode exhibits an ultralow voltage hysteresis of 19 mV, a high average Coulombic efficiency of 98.45% over 250 cycles, and a stable Li plating/stripping performance even at a high current density of 4.0 mA cm^?2. This work demonstrates the application of SA metal doping in the rational design of Li metal anodes and provides a new concept for further development of Li metal batteries.     

Controlling the Active Sites of Sulfur‐Doped Carbon Nanotube–Graphene Nanolobes for Highly Efficient Oxygen Evolution and Reduction Catalysis

Controlling active sites of metal‐free catalysts is an important strategy to enhance activity of the oxygen evolution reaction (OER). Many attempts have been made to develop metal‐free catalysts, but the lack of understanding of active‐sites at the atomic‐level has slowed the design of highly active and stable metal‐free catalysts. A sequential two‐step strategy to dope sulfur into carbon nanotube–graphene nanolobes is developed. This bidoping strategy introduces stable sulfur–carbon active‐sites. Fluorescence emission of the sulfur K‐edge by X‐ray absorption near edge spectroscopy (XANES) and scanning transmission electron microscopy electron energy loss spectroscopy (STEM‐EELS) mapping and spectra confirm that increasing the incorporation of heterocyclic sulfur into the carbon ring of CNTs not only enhances OER activity with an overpotential of 350 mV at a current density of 10 mA cm^?2, but also retains 100% of stability after 75 h. The bidoped sulfur carbon nanotube–graphene nanolobes behave like the state‐of‐the‐art catalysts for OER but outperform those systems in terms of turnover frequency (TOF) which is two orders of magnitude greater than (20% Ir/C) at 400 mV overpotential with very high mass activity 1000 mA cm^?2 at 570 mV. Moreover, the sulfur bidoping strategy shows high catalytic activity for the oxygen reduction reaction (ORR). Stable bifunctional (ORR and OER) catalysts are low cost, and light‐weight bidoped sulfur carbon nanotubes are potential candidates for next‐generation metal‐free regenerative fuel cells.     

Implanting Isolated Ru Atoms into Edge‐Rich Carbon Matrix for Efficient Electrocatalytic Hydrogen Evolution

Although the maximized dispersion of metal atoms has been realized in the single‐atom catalysts, further improving the intrinsic activity of the catalysts is of vital importance. Here, the decoration of isolated Ru atoms into an edge‐rich carbon matrix is reported for the electrocatalytic hydrogen evolution reaction. The developed catalyst displays high catalytic performance with low overpotentials of 63 and 102 mV for achieving the current densities of 10 and 50 mA cm^?2, respectively. Its mass activity is about 9.6 times higher than that of the commercial Pt/C‐20% catalyst at an overpotential of 100 mV. Experimental results and density functional theory calculations suggest that the edges in the carbon matrix enhance the local electric field at the Ru site and accelerate the reaction kinetics for the hydrogen evolution. The present work may provide insights into electrocatalytic behavior and guide the design of advanced electrocatalysts.     

Oriented Transformation of Co‐LDH into 2D/3D ZIF‐67 to Achieve Co–N–C Hybrids for Efficient Overall Water Splitting

Construction of well‐defined metal–organic framework precursor is vital to derive highly efficient transition metal–carbon‐based electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in water splitting. Herein, a novel strategy involving an in situ transformation of ultrathin cobalt layered double hydroxide into 2D cobalt zeolitic imidazolate framework (ZIF‐67) nanosheets grafted with 3D ZIF‐67 polyhedra supported on the surface of carbon cloth (2D/3D ZIF‐67@CC) precursor is proposed. After a low‐temperature pyrolysis, this precursor can be further converted into hybrid composites composed of ultrafine cobalt nanoparticles embedded within 2D N‐doped carbon nanosheets and 3D N‐doped hollow carbon polyhedra (Co@N‐CS/N‐HCP@CC). Experimental and density functional theory calculations results indicate that such composites have the advantages of a large number of accessible active sites, accelerated charge/mass transfer ability, the synergistic effect of components as well as an optimal water adsorption energy change. As a result, the obtained Co@N‐CS/N‐HCP@CC catalyst requires overpotentials of only 66 and 248 mV to reach a current density of 10 mA cm^?2 for HER and OER in 1.0 m KOH, respectively. Remarkably, it enables an alkali‐electrolyzer with a current density of 10 mA cm^?2 at a low cell voltage of 1.545 V, superior to that of the IrO₂@CC||Pt/C@CC couple (1.592 V).     

Activation of Ni Particles into Single Ni–N Atoms for Efficient Electrochemical Reduction of CO2

Electrochemical reduction of carbon dioxide (CO₂) to fuels and value‐added industrial chemicals is a promising strategy for keeping a healthy balance between energy supply and net carbon emissions. Here, the facile transformation of residual Ni particle catalysts in carbon nanotubes into thermally stable single Ni atoms with a possible NiN₃ moiety is reported, surrounded with a porous N‐doped carbon sheath through a one‐step nanoconfined pyrolysis strategy. These structural changes are confirmed by X‐ray absorption fine structure analysis and density functional theory (DFT) calculations. The dispersed Ni single atoms facilitate highly efficient electrocatalytic CO₂ reduction at low overpotentials to yield CO, providing a CO faradaic efficiency exceeding 90%, turnover frequency approaching 12 000 h^?1, and metal mass activity reaching about 10 600 mA mg^?1, outperforming current state‐of‐the‐art single atom catalysts for CO₂ reduction to CO. DFT calculations suggest that the Ni@N₃ (pyrrolic) site favors *COOH formation with lower free energy than Ni@N₄, in addition to exothermic CO desorption, hence enhancing electrocatalytic CO₂ conversion. This finding provides a simple, scalable, and promising route for the preparation of low‐cost, abundant, and highly active single atom catalysts, benefiting future practical CO₂ electrolysis.     

Surface Engineering of 3D Gas Diffusion Electrodes for High‐Performance H2 Production with Nonprecious Metal Catalysts

In this work, a methodology is demonstrated to engineer gas diffusion electrodes for nonprecious metal catalysts. Highly active transition metal phosphides are prepared on carbon‐based gas diffusion electrodes with low catalyst loadings by modifying the O/C ratio at the surface of the electrode. These nonprecious metal catalysts yield extraordinary performance as measured by low overpotentials (51 mV at ?10 mA cm^?2), unprecedented mass activities (>800 A g^?1 at 100 mV overpotential), high turnover frequencies (6.96 H₂ s^?1 at 100 mV overpotential), and high durability for a precious metal‐free catalyst in acidic media. It is found that a high O/C ratio induces a more hydrophilic surface directly impacting the morphology of the CoP catalyst. The improved hydrophilicity, stemming from introduced oxyl groups on the carbon electrode, creates an electrode surface that yields a well‐distributed growth of cobalt electrodeposits and thus a well‐dispersed catalyst layer with high surface area upon phosphidation. This report demonstrates the high‐performance achievable by CoP at low loadings which facilitates further cost reduction, an important part of enabling the large‐scale commercialization of non‐platinum group metal catalysts. The fabrication strategies described herein offer a pathway to lower catalyst loading while achieving high efficiency and promising stability on a 3D electrode.     

General Dimension‐Controlled Synthesis of Hollow Carbon Embedded with Metal Singe Atoms or Core–Shell Nanoparticles for Energy Storage Applications

Metal–organic framework (MOF) derived carbonaceous nanocomposites have recently received enormous interest due to their intriguing physiochemical properties and diverse energy applications. However, there is a lack of general synthetic approaches that can achieve flexible dimension control while manipulating metal dispersion of MOF derived carbon composites. Herein, the authors present an attractive route for the growth of zeolitic imidazolate frameworks (ZIFs) with different dimensions and types of metal nodes that can be further transformed into either core–shell nanoparticles or metal single atoms. The formation of a ZIF‐8 seed layer on ZnO template is identified as the key step, enabling uniform growth of various ZIF materials (e.g., Zn/Co‐ZIF, Zn/Fe‐ZIF, and ZIF‐7) with different dimensions (1D, 2D, and 3D). Simultaneously, this approach avoids free growth of 0D MOF particles and diminishing of the ZnO template. To demonstrate the importance of dimensional control over the growth of ZIF materials for energy application, the 1D and 2D ZnO@ZIF precursors are converted into carbon nanotube and carbon nanoplate, which are decorated with Co/CoS₂ nanoparticles and Fe single atoms, respectively. Two high dimensional carbon nanocomposites deliver significantly enhanced performances compared to their 0D counterparts when employed as the Li‐ion battery anode and bifunctional oxygen electrocatalyst.     

Electronically Double‐Layered Metal Boride Hollow Nanoprism as an Excellent and Robust Water Oxidation Electrocatalysts

Metal–metalloid compounds have been paid much attention as new high‐performance water oxidation catalysts due to their exceptional durability for water oxidation in alkaline media originating from the multi‐dimensional covalent bonding of the metalloid with the surrounding metal atoms. However, compared to the excellent stability, a relatively low catalytic activity of metal‐metalloids often limits their practical application as high‐performance water oxidation catalysts. Here, for the first time, disclosed is a novel self‐templating strategy combined with atomic layer deposition (ALD) to design the electrochemically active and stable quaternary metal boride (vanadium‐doped cobalt nickel boride, VCNB), hollow nanoprism by inducing electronic double layers on the surface. The incorporation of V in a double‐layered structure can substantially increase the number of surface active sites with unsaturated electronic structure. Furthermore, the induced electronic double layers of V can effectively protect the dissolution of the surface active sites. In addition, density functional theory (DFT) calculations reveal that the impressive water oxidation properties of VCNB originate from the synergetic physicochemical effects of the different metal elements, Co and B as active sites, Ni as a surface electronic structure modifier, and V as a charge carrier transporter and supplier.     

Sequential Synthesis and Active‐Site Coordination Principle of Precious Metal Single‐Atom Catalysts for Oxygen Reduction Reaction and PEM Fuel Cells

Carbon‐supported precious metal single‐atom catalysts (PM SACs) have shown promising application in proton exchange membrane fuel cells (PEMFCs). However, the coordination principle of the active site, consisting of one PM atom and several coordinating anions, is still unclear for PM SACs. Here, a sequential coordination method is developed to dope a large amount of PM atoms (Ir, Rh, Pt and Pd) into a zeolite imidazolate framework (ZIF), which are further pyrolyzed into nitrogen‐coordinated PM SACs. The PM loadings are as high as 1.2–4.5 wt%, achieving the highest PM loadings in ZIF‐derived SACs to date. In the acidic half‐cell, Ir₁‐N/C and Rh₁‐N/C exhibit much higher oxygen reduction reaction (ORR) activities than nanoparticle catalysts Ir/C and Rh/C. In the contrast, the activities of Pd₁‐N/C and Pt₁‐N/C are considerably lower than Pd/C and Pt/C. Density function theory (DFT) calculations reveal that the ORR activity of PM SAC depends on the match between the OH* adsorption on PM and the electronegativity of coordinating anions, and the stronger OH* adsorption is, the higher electronegativity is needed for the coordinating anions. PEMFC tests confirm the active‐site coordination principle and show the extremely high atomic efficiency of Ir₁‐N/C. The revealed principle provides guidance for designing future PM SACs for PEMFCs.     

Atomic‐Level Reactive Sites for Semiconductor‐Based Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction is an effective means to generate renewable energy. It involves redox reactions, reduction of CO₂ and oxidation of water, that leads to the production of solar fuel. Significant research effort has therefore been made to develop inexpensive and practically sustainable semiconductor‐based photocatalysts. The exploration of atomic‐level active sites on the surface of semiconductors can result in an improved understanding of the mechanism of CO₂ photoreduction. This can be applied to the design and synthesis of efficient photocatalysts. In this review, atomic‐level reactive sites are classified into four types: vacancies, single atoms, surface functional groups, and frustrated Lewis pairs (FLPs). These different photocatalytic reactive sites are shown to have varied affinity to reactants, intermediates, and products. This changes pathways for CO₂ reduction and significantly impacts catalytic activity and selectivity. The design of a photocatalyst from an atomic‐level perspective can therefore be used to maximize atomic utilization efficiency and lead to a high selectivity. The prospects for fabrication of effective photocatalysts based on an in‐depth understanding are highlighted.     

Engineering Local Coordination Environments of Atomically Dispersed and Heteroatom‐Coordinated Single Metal Site Electrocatalysts for Clean Energy‐Conversion

Carbon‐based heteroatom‐coordinated single‐atom catalysts (SACs) are promising candidates for energy‐related electrocatalysts because of their low‐cost, tunable catalytic activity/selectivity, and relatively homogeneous morphologies. Unique interactions between single metal sites and their surrounding coordination environments play a significant role in modulating the electronic structure of the metal centers, leading to unusual scaling relationships, new reaction mechanisms, and improved catalytic performance. This review summarizes recent advancements in engineering of the local coordination environment of SACs for improved electrocatalytic performance for several crucial energy‐convention electrochemical reactions: oxygen reduction reaction, hydrogen evolution reaction, oxygen evolution reaction, CO₂ reduction reaction, and nitrogen reduction reaction. Various engineering strategies including heteroatom‐doping, changing the location of SACs on their support, introducing external ligands, and constructing dual metal sites are comprehensively discussed. The controllable synthetic methods and the activity enhancement mechanism of state‐of‐the‐art SACs are also highlighted. Recent achievements in the electronic modification of SACs will provide an understanding of the structure–activity relationship for the rational design of advanced electrocatalysts.     

Single‐Atom to Single‐Atom Grafting of Pt1 onto FeN4 Center: Pt1@FeNC Multifunctional Electrocatalyst with Significantly Enhanced Properties

Nonprecious metal catalysts (NPMCs) Fe?N?C are promising alternatives to noble metal Pt as the oxygen reduction reaction (ORR) catalysts for proton‐exchange‐membrane fuel cells. Herein, a new modulation strategy is reported to the active moiety Fe?N₄ via a precise “single‐atom to single‐atom” grafting of a Pt atom onto the Fe center through a bridging oxygen molecule, creating a new active moiety of Pt₁?O₂?Fe₁?N₄. The modulated Fe?N?C exhibits remarkably improved ORR stabilities in acidic media. Moreover, it shows unexpectedly high catalytic activities toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), with overpotentials of 310 mV for OER in alkaline solution and 60 mV for HER in acidic media at a current density of 10 mA cm^?2, outperforming the benchmark RuO₂ and comparable with Pt/C(20%), respectively. The enhanced multifunctional electrocatalytic properties are associated with the newly constructed active moiety Pt₁?O₂?Fe₁?N₄, which protects Fe sites from harmful species. Density functional theory calculations reveal the synergy in the new active moiety, which promotes the proton adsorption and reduction kinetics. In addition, the grafted Pt₁?O₂? dangling bonds may boost the OER activity. This study paves a new way to improve and extend NPMCs electrocatalytic properties through a precisely single‐atom to single‐atom grafting strategy.     

In Situ “Chainmail Catalyst” Assembly in Low‐Tortuosity,Hierarchical Carbon Frameworks for Efficient and Stable Hydrogen Generation

The chainmail catalysts (transition metals or metal alloys encapsulated in carbon) are regarded as stable and efficient electrocatalysts for hydrogen generation. However, the fabrication of chainmail catalysts usually involves complex chemical vapor deposition (CVD) or prolonged calcination in a furnace, and the slurry‐based electrode assembly of the chainmail catalysts often suffers from inferior mass transfer and an underutilized active surface. In this work, a freestanding wood‐based open carbon framework is designed embedded with nitrogen (N) doped, few‐graphene‐layer‐encapsulated nickel iron (NiFe) alloy nanoparticles (N‐C‐NiFe). 3D wood‐derived carbon framework with numerous open and low‐tortuosity lumens, which are decorated with carbon nanotubes (CNTs) “villi”, can facilitate electrolyte permeation and hydrogen gas removal. The chainmail catalysts of the N‐C‐NiFe are uniformly in situ assembled on the CNT “villi” using a rapid heat shock treatment. The high heating and quenching rates of the heat shock method lead to formation of the well‐dispersed ultrafine nanoparticles. The self‐supported wood‐based carbon framework decorated with the chainmail catalyst displays high electrocatalytic activity and superior cycling durability for hydrogen evolution. The unique heat shock method offers a promising strategy to rapidly synthesize well‐dispersed binary and polynary metallic nanoparticles in porous matrices for high‐efficiency electrochemical energy storage and conversion.     

3D Synergistically Active Carbon Nanofibers for Improved Oxygen Evolution

Developing earth‐abundant and active electrocatalysts for the oxygen evolution reaction (OER) as replacements for conventional noble metal catalysts is of scientific and technological importance for achieving cost‐effective and efficient conversion and storage of renewable energy. However, most of the promising candidates thus far are exclusively metal‐based catalysts, which are disadvantaged by relatively restricted electron mobility, corrosion susceptibility, and detrimental environmental influences. Herein, hierarchically porous nitrogen (N) and phosphorus (P) codoped carbon nanofibers directly grown on conductive carbon paper are prepared through an electrochemically induced polymerization process in the presence of aniline monomer and phosphonic acid. The resultant material exhibits robust stability (little activity attenuation after 12 h continuous operation) and high activity with low overpotential (310 mV at 10 mA cm^?2) toward electrocatalytic oxygen production, with performance comparable to that of the precious iridium oxide (IrO₂) benchmark. Experimental measurements reveal that dual doping of N and P can result in an increased active surface area and abundant active sites in comparison with the single doped and pristine carbon counterparts, and density functional theory calculations indicate that N and P dopants can coactivate the adjacent C atoms, inducing synergistically enhanced activity toward OER.