Copper–Nickel Nitride Nanosheets as Efficient Bifunctional Catalysts for Hydrazine‐Assisted Electrolytic Hydrogen Production

Electrocatalytic water splitting is one of the sustainable and promising strategies to generate hydrogen fuel but still remains a great challenge because of the sluggish anodic oxygen evolution reaction (OER). A very effective approach to dramatically decrease the input cell voltage of water electrolysis is to replace the anodic OER with hydrazine oxidation reaction (HzOR) due to its lower thermodynamic oxidation potential. Therefore, developing the low‐cost and efficient HzOR catalysts, coupled with the cathodic hydrogen evolution reaction (HER), is tremendously important for energy‐saving electrolytic hydrogen production. Herein, a new‐type of copper–nickel nitride (Cu₁Ni₂‐N) with rich Cu₄N/Ni₃N interface is rationally constructed on carbon fiber cloth. The 3D electrode exhibits extraordinary HER performance with an overpotential of 71.4 mV at 10 mA cm^?2 in 1.0 m KOH, simultaneously delivering an ultralow potential of 0.5 mV at 10 mA cm^?2 for HzOR in a 1.0 m KOH/0.5 m hydrazine electrolyte. Moreover, the electrolytic cell utilizing the synthesized Cu₁Ni₂‐N electrode as both the cathode and anode display a cell voltage of 0.24 V at 10 mA cm^?2 with an excellent stability over 75 h. The present work develops the promising copper–nickel‐based nitride as a bifunctional electrocatalyst through hydrazine‐assistance for energy‐saving electrolytic hydrogen production.     

Synergistically Tuning Water and Hydrogen Binding Abilities Over Co4N by Cr Doping for Exceptional Alkaline Hydrogen Evolution Electrocatalysis

Searching for highly efficient and cost‐effective electrocatalysts toward the hydrogen evolution reaction (HER) in alkaline electrolyte is highly desirable for the development of alkaline water splitting, but still remains a significant challenge. Herein, the rational design of Cr‐doped Co₄N nanorod arrays grown on carbon cloth (Cr–Co₄N/CC) that can efficiently catalyze the HER in alkaline media is reported. It displays outstanding performance, with the exceptionally small overpotential of 21 mV to obtain the current density of 10 mA cm^?2 and good stability in 1.0 m KOH, which is even better than the commercial Pt/C electrocatalyst, and much lower than most of the reported transition metal nitride‐based and other non‐noble metal‐based electrocatalysts toward the alkaline HER. Density functional theory (DFT) calculations and experimental results reveal that the Cr atoms not only act as oxophilic sites for boosting water adsorption and dissociation, but also modulate the electronic structure of Co₄N to endow optimized hydrogen binding abilities on Co atoms, thereby leading to accelerating both the alkaline Volmer and Heyrovsky reaction kinetics. In addition, this strategy can be extended to other metals (such as Mo, Mn, and Fe) doped Co₄N electrocatalysts, thus may open up a new avenue for the rational design of highly efficient transition metal nitride‐based HER catalysts and beyond.     

Dual‐Functional N Dopants in Edges and Basal Plane of MoS2 Nanosheets Toward Efficient and Durable Hydrogen Evolution

Herein, the authors explicitly reveal the dual‐functions of N dopants in molybdenum disulfide (MoS₂) catalyst through a combined experimental and first‐principles approach. The authors achieve an economical, ecofriendly, and most efficient MoS₂‐based hydrogen evolution reaction (HER) catalyst of N‐doped MoS₂ nanosheets, exhibiting an onset overpotential of 35 mV, an overpotential of 121 mV at 100 mA cm^?2 and a Tafel slope of 41 mV dec^?1. The dual‐functions of N dopants are (1) activating the HER catalytic activity of MoS₂ S‐edge and (2) enhancing the conductivity of MoS₂ basal plane to promote rapid charge transfer. Comprehensive electrochemical measurements prove that both the amount of active HER sites and the conductivity of N‐doped MoS₂ increase as a result of doping N. Systematic first‐principles calculations identify the active HER sites in N‐doped MoS₂ edges and also illustrate the conducting charges spreading over N‐doped basal plane induced by strong Mo 3d –S 2p –N 2p hybridizations at Fermi level. The experimental and theoretical research on the efficient HER catalysis of N‐doped MoS₂ nanosheets possesses great potential for future sustainable hydrogen production via water electrolysis and will stimulate further development on nonmetal‐doped MoS₂ systems to bring about novel high‐performance HER catalysts.     

Interface Engineering of Hierarchical Branched Mo‐Doped Ni3S2/NixPy Hollow Heterostructure Nanorods for Efficient Overall Water Splitting

Rational design and construction of bifunctional electrocatalysts with excellent activity and durability is imperative for water splitting. Herein, a novel top‐down strategy to realize a hierarchical branched Mo‐doped sulfide/phosphide heterostructure (Mo‐Ni₃S₂/Ni_xP_y hollow nanorods), by partially phosphating Mo‐Ni₃S₂/NF flower clusters, is proposed. Benefitting from the optimized electronic structure configuration, hierarchical branched hollow nanorod structure, and abundant heterogeneous interfaces, the as‐obtained multisite Mo‐Ni₃S₂/Ni_xP_y/NF electrode has remarkable stability and bifunctional electrocatalytic activity in the hydrogen evolution reaction (HER)/oxygen evolution reaction (OER) in 1 m KOH solutions. It possesses an extremely low overpotential of 238 mV at the current density of 50 mA cm^?2 for OER. Importantly, when assembled as anode and cathode simultaneously, it merely requires an ultralow cell voltage of 1.46 V to achieve the current density of 10 mA cm^?2, with excellent durability for over 72 h, outperforming most of the reported Ni‐based bifunctional materials. Density functional theory results further confirm that the doped heterostructure can synergistically optimize Gibbs free energies of H and O‐containing intermediates (OH*, O*, and OOH*) during HER and OER processes, thus accelerating the catalytic kinetics of electrochemical water splitting. This work demonstrates the importance of the rational combination of metal doping and interface engineering for advanced catalytic materials.     

Unsaturated Sulfur Edge Engineering of Strongly Coupled MoS2 Nanosheet–Carbon Macroporous Hybrid Catalyst for Enhanced Hydrogen Generation

The low hydrogen adsorption free energy and strong acid/alkaline resistance of layered MoS₂ render it an excellent pH‐universal electrocatalyst for hydrogen evolution reaction (HER). However, the catalytic activity is dominantly suppressed by its limited active‐edge‐site density. Herein, a new strategy is reported for making a class of strongly coupled MoS₂ nanosheet–carbon macroporous hybrid catalysts with engineered unsaturated sulfur edges for boosting HER catalysis by controlling the precursor decomposition and subsequent sodiation/desodiation. Both surface chemical state analysis and first‐principles calculations verify that the resultant catalysts exhibit a desirable valence‐electron state with high exposure of unsaturated sulfur edges and an optimized hydrogen adsorption free energy, significantly improving the intrinsic HER catalytic activity. Such an electrocatalyst exhibits superior and stable catalytic activity toward HER with small overpotentials of 136 mV in 0.5 m H₂SO₄ and 155 mV in 1 m KOH at 10 mA cm^?2, which is the best report for MoS₂–C hybrid electrocatalysts to date. This work paves a new avenue to improve the intrinsic catalytic activity of 2D materials for hydrogen generation.     

Ni Strongly Coupled with Mo2C Encapsulated in Nitrogen‐Doped Carbon Nanofibers as Robust Bifunctional Catalyst for Overall Water Splitting

It is urgently required to develop highly efficient and stable bifunctional non‐noble metal electrocatalysts for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) for water splitting. In this study, a facile electrospinning followed by a post‐carbonization treatment to synthesize nitrogen‐doped carbon nanofibers (NCNFs) integrated with Ni and Mo₂C nanoparticles (Ni/Mo₂C‐NCNFs) as water splitting electrocatalysts is developed. Owing to the strong hydrogen binding energy on Mo₂C and high electrical conductivity of Ni, synergetic effect between Ni and Mo₂C nanoparticles significantly promote both HER and OER activities. The optimized hybrid (Ni/Mo₂C(1:2)‐NCNFs) delivers low overpotentials of 143 mV for HER and 288 mV for OER at a current density of 10 mA cm^?2. An alkaline electrolyzer with Ni/Mo₂C(1:2)‐NCNFs as catalysts for both anode and cathode exhibits a current density of 10 mA cm^?2 at a voltage of 1.64 V, which is only 0.07 V larger than the benchmark of Pt/C‐RuO₂ electrodes. In addition, an outstanding long‐term durability during 100 h testing without obvious degradation is achieved, which is superior to most of the noble‐metal‐free electrocatalysts reported to date. This work provides a simple and effective approach for the preparation of low‐cost and high‐performance bifunctional electrocatalysts for efficient overall water splitting.     

Superb Alkaline Hydrogen Evolution and Simultaneous Electricity Generation by Pt‐Decorated Ni3N Nanosheets

The development of efficient hydrogen evolution reaction electrocatalysts is critical to the realization of clean hydrogen fuel production, while the sluggish kinetics of the Volmer‐step substantially restricts the catalyst performances in alkali electrolyzers, even for noble metal catalysts such as Pt. Here, a Pt‐decorated Ni₃N nanosheet electrocatalyst is developed to achieve a top performance of hydrogen evolution in alkaline conditions. Possessing a high metallic conductivity and an atomic‐thin semiconducting hydroxide surface, the Ni₃N nanosheets serve as not only an efficient electron pathway without the hindrance of Schottky barriers, but also provide abundant active sites for water dissociation and generation of hydrogen intermediates, which are further adsorbed on the Pt surface to recombine to H₂. The Pt‐decorated Ni₃N nanosheet catalyst exhibits a hydrogen evolution current density of 200 mA cm^?2 at an overpotential of 160 mV versus reversible hydrogen electrode, a Tafel slope of ≈36.5 mV dec^?1, and excellent stability of 82.5% current retention after 24 h of operation. Moreover, a hybrid cell consisting of a Pt‐decorated Ni₃N nanosheet cathode and a Li‐metal anode is assembled to achieve simultaneous hydrogen evolution and electricity generation, exhibiting >60 h long‐term hydrogen evolution reaction stability and an output voltage ranging from 1.3 to 2.2 V.     

Molybdenum Disulfide/Nitrogen‐Doped Reduced Graphene Oxide Nanocomposite with Enlarged Interlayer Spacing for Electrocatalytic Hydrogen Evolution

Facile design of low‐cost and highly active catalysts from earth‐abundant elements is favorable for the industrial application of water splitting. Here, a simple strategy to synthesize an ultrathin molybdenum disulfide/nitrogen‐doped reduced graphene oxide (MoS₂/N‐RGO‐180) nanocomposite with the enlarged interlayer spacing of 9.5 Å by a one‐step hydrothermal method is reported. The synergistic effects between the layered MoS₂ nanosheets and N‐doped RGO films contribute to the high activity for hydrogen evolution reaction (HER). MoS₂/N‐RGO‐180 exhibits the excellent catalytic activity with a low onset potential of ?5 mV versus reversible hydrogen elelctrode (RHE), a small Tafel slope of 41.3 mV dec^?1, a high exchange current density of 7.4 × 10^?4 A cm^?2, and good stability over 5 000 cycles under acidic conditions. The HER performance of MoS₂/N‐RGO‐180 nanocomposite is superior to the most reported MoS₂‐based catalysts, especially its onset potential and exchange current density. In this work, a novel and simple method to the preparation of low‐cost MoS₂‐based electrocatalysts with the extraordinary HER performance is presented.     

Electroless Plating of Highly Efficient Bifunctional Boride‐Based Electrodes toward Practical Overall Water Splitting

Exploring highly‐efficient and low‐cost electrodes for both hydrogen and oxygen evolution reaction (HER and OER) is of primary importance to economical water splitting. Herein, a series of novel and robust bifunctional boride‐based electrodes are successfully fabricated using a versatile Et₂NHBH₃‐involved electroless plating (EP) approach via deposition of nonprecious boride‐based catalysts on various substrates. Owing to the unique binder‐free porous nodule structure induced by the hydrogen release EP reaction, most of the nonprecious boride‐based electrodes are highly efficient for overall water splitting. As a distinctive example, the Co‐B/Ni electrode can afford 10 mA cm^?2 at overpotentials of only 70 mV for HER and 140 mV for OER, and can also survive at large current density of 1000 mA cm^?2 for over 20 h without performance degradation in 1.0 m KOH. Several boride‐based two‐electrode electrolyzers can achieve 10 mA cm^?2 at low voltages of around 1.4 V. Moreover, the facile EP approach is economically viable for flexible and large size electrode production.     

From Water Oxidation to Reduction: Homologous Ni–Co Based Nanowires as Complementary Water Splitting Electrocatalysts

A homologous Ni–Co based nanowire system, consisting of both nickel cobalt oxide and nickel cobalt sulfide nanowires, is developed for efficient, complementary water splitting. The spinel‐type nickel cobalt oxide (NiCo₂O₄) nanowires are hydrothermally synthesized and can serve as an excellent oxygen evolution reaction catalyst. Subsequent sulfurization of the NiCo₂O₄ nanowires leads to the formation of pyrite‐type nickel cobalt sulfide (Ni_0.33Co_0.67S₂) nanowires. Due to the 1D nanowire morphology and enhanced charge transport capability, the Ni_0.33Co_0.67S₂ nanowires function as an efficient, stable, and robust nonnoble metal electrocatalyst for hydrogen evolution reaction (HER), substantially exceeding CoS₂ or NiS₂ nanostructures synthesized under similar methods. The Ni_0.33Co_0.67S₂ nanowires exhibit low onset potential of ?65, ?39, and ?50 mV versus reversible hydrogen electrode, Tafel slopes of 44, 68, and 118 mV dec^?1 at acidic, neutral, and basic conditions, respectively, and excellent stability, comparable to the best reported non‐noble metal‐based HER catalysts. Furthermore, the homologous Ni_0.33Co_0.67S₂ nanowires and NiCo₂O₄ nanowires are assembled into an all‐nanowire based water splitting electrolyzer with a current density of 5 mA cm^?2 at a voltage as 1.65 V, thus suggesting a unique homologous, earth abundant material system for water splitting.     

One‐Step Controllable Synthesis of Catalytic Ni4Mo/MoOx/Cu Nanointerfaces for Highly Efficient Water Reduction

Currently, in addition to the electroactive non‐noble metal water‐splitting electrocatalysts, a scalable synthetic route and simple activity enhancement strategy is also urgently needed. In particular, the well‐controlled synthesis of the well‐recognized metal–metal nanointer face in a single step remains a key challenge. Here, the synthesis of Cu‐supported Ni₄Mo nanodots on MoO_x nanosheets (Ni₄Mo/MoO_x) with controllable Ni₄Mo particle size and d‐band structure is reported via a facile one‐step electrodeposition process. Density functional theory (DFT) calculations reveal that the active open‐shell effect from Ni‐3d‐band optimizes the electronic configuration. The Cu‐substrate enables the surface Ni–Mo alloy dots to be more electron‐rich, forming a local connected electron‐rich network, which boosts the charge transfer for effective binding of O‐related species and proton–electron charge exchange in the hydrogen evolution reaction. The Cu‐supported Ni₄Mo/MoO_x shows an ultralow overpotential of 16 mV at a current density of 10 mA cm^?2 in 1 m KOH, demonstrating the smallest overpotential, at loadings as low as 0.27 mg cm^?2, among all non‐noble metal catalysts reported to date. Moreover, an overpotential of 105 mV allows it to achieve a current density of 250 mA cm^?2 in 70 °C 30% KOH, a remarkable performance for alkaline hydrogen evolution with competitive potential for applications.     

Earth‐Abundant Iron Diboride (FeB2) Nanoparticles as Highly Active Bifunctional Electrocatalysts for Overall Water Splitting

Developing efficient, durable, and earth‐abundant electrocatalysts for both hydrogen and oxygen evolution reactions is important for realizing large‐scale water splitting. The authors report that FeB₂ nanoparticles, prepared by a facile chemical reduction of Fe²⁺ using LiBH₄ in an organic solvent, are a superb bifunctional electrocatalyst for overall water splitting. The FeB₂ electrode delivers a current density of 10 mA cm^?2 at overpotentials of 61 mV for hydrogen evolution reaction (HER) and 296 mV for oxygen evolution reaction (OER) in alkaline electrolyte with Tafel slopes of 87.5 and 52.4 mV dec^?1, respectively. The electrode can sustain the HER at an overpotential of 100 mV for 24 h and OER for 1000 cyclic voltammetry cycles with negligible degradation. Density function theory calculations demonstrate that the boron‐rich surface possesses appropriate binding energy for chemisorption and desorption of hydrogen‐containing intermediates, thus favoring the HER process. The excellent OER activity of FeB₂ is ascribed to the formation of a FeOOH/FeB₂ heterojunction during water oxidation. An alkaline electrolyzer is constructed using two identical FeB₂‐NF electrodes as both anode and cathode, which can achieve a current density of 10 mA cm^?2 at 1.57 V for overall water splitting with a faradaic efficiency of nearly 100%, rivalling the integrated state‐of‐the‐art Pt/C and RuO₂/C.     

Oriented Transformation of Co‐LDH into 2D/3D ZIF‐67 to Achieve Co–N–C Hybrids for Efficient Overall Water Splitting

Construction of well‐defined metal–organic framework precursor is vital to derive highly efficient transition metal–carbon‐based electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in water splitting. Herein, a novel strategy involving an in situ transformation of ultrathin cobalt layered double hydroxide into 2D cobalt zeolitic imidazolate framework (ZIF‐67) nanosheets grafted with 3D ZIF‐67 polyhedra supported on the surface of carbon cloth (2D/3D ZIF‐67@CC) precursor is proposed. After a low‐temperature pyrolysis, this precursor can be further converted into hybrid composites composed of ultrafine cobalt nanoparticles embedded within 2D N‐doped carbon nanosheets and 3D N‐doped hollow carbon polyhedra (Co@N‐CS/N‐HCP@CC). Experimental and density functional theory calculations results indicate that such composites have the advantages of a large number of accessible active sites, accelerated charge/mass transfer ability, the synergistic effect of components as well as an optimal water adsorption energy change. As a result, the obtained Co@N‐CS/N‐HCP@CC catalyst requires overpotentials of only 66 and 248 mV to reach a current density of 10 mA cm^?2 for HER and OER in 1.0 m KOH, respectively. Remarkably, it enables an alkali‐electrolyzer with a current density of 10 mA cm^?2 at a low cell voltage of 1.545 V, superior to that of the IrO₂@CC||Pt/C@CC couple (1.592 V).     

Atomically Dispersed Mo Supported on Metallic Co9S8 Nanoflakes as an Advanced Noble‐Metal‐Free Bifunctional Water Splitting Catalyst Working in Universal pH Conditions

Water splitting requires development of cost‐effective multifunctional materials that can catalyze both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) efficiently. Currently, the OER relies on the noble‐metal catalysts; since with other catalysts, its operation environment is greatly limited in alkaline conditions. Herein, an advanced water oxidation catalyst based on metallic Co₉S₈ decorated with single‐atomic Mo (0.99 wt%) is synthesized (Mo‐Co₉S₈@C). It exhibits pronounced water oxidization activity in acid, alkali, and neutral media by showing positive onset potentials of 200, 90, and 290 mV, respectively, which manifests the best Co₉S₈‐based single‐atom Mo catalyst till now. Moreover, it also demonstrates excellent HER performance over a wide pH range. Consequently, the catalyst even outperforms noble metal Pt/IrO₂‐based catalysts for overall water splitting (only requiring 1.68 V in acid, and 1.56 V in alkaline). Impressively, it works under a current density of 10 mA cm^?2 with no obvious decay during a 24 h (0.5 m H₂SO₄) and 72 h (1.0 m KOH) durability experiment. Density functional theory (DFT) simulations reveal that the synergistic effects of atomically dispersed Mo with Co‐containing substrates can efficiently alter the binding energies of adsorbed intermediate species and decrease the overpotentials of the water splitting.     

Ruthenium Triazine Composite: A Good Match for Increasing Hydrogen Evolution Activity through Contact Electrification

The development of Pt‐free catalysts for the alkaline hydrogen evolution reaction (HER), which is widely used in industrial scale water‐alkali electrolyzers, remains a contemporary and pressing challenge. Ruthenium (Ru) has excellent water‐dissociation abilities and could be an alternative water splitting catalyst. However, its large hydrogen binding energy limits HER activity. Here, a new approach is proposed to boost the HER activity of Ru through uniform loading of Ru nanoparticles on triazine‐ring (C₃N₃)‐doped carbon (triNC). The composite (Ru/triNC) exhibits outstanding HER activity with an ultralow overpotential of ≈2 mV at 10 mA cm^?2; thereby making it the best performing electrocatalyst hitherto reported for alkaline HER. The calculated metal mass activity of Ru/triNC is >10 and 15 times higher than that of Pt/C and Pt/triNC. Both theoretical and experimental studies reveal that the triazine‐ring is a good match for Ru to weaken the hydrogen binding on Ru through interfacial charge transfer via increased contact electrification. Therefore, Ru/triNC can provide the optimal hydrogen adsorption free energy (approaching zero), while maintaining the strong water‐dissociation activity. This study provides a new avenue for designing highly efficient and stable electrocatalysts for water splitting.     

Vertical CoP Nanoarray Wrapped by N,P‐Doped Carbon for Hydrogen Evolution Reaction in Both Acidic and Alkaline Conditions

Hydrogen evolution reaction (HER) is a key reaction in water splitting, and developing efficient and robust non‐noble electrocatalysts for HER is still a great challenge for large‐scale hydrogen production. Herein, a vertically aligned core–shell structure grown on Ti foil with CoP nanoarray as a core and N,P‐doped carbon (NPC) as a shell (CoP/NPC/TF) is first reported as an efficient electrocatalyst for HER. Results indicate that CoP/NPC/TF only demands the overpotentials of 91 and 80 mV to drive the current density of 10 mA cm^?2 in acidic and alkaline solutions. The electrochemical measurements and theoretical calculations show that the synergy of CoP nanorod core and porous NPC shell enhances HER performance significantly, because the introduction of porous NPC shell not only offers more active sites but also improves the electrical conductivity and durability of the sample in acidic and alkaline solutions. Density functional theory calculation further reveals that all the C atoms between N and P atoms in CoP/NPC are the most efficient active sites, which greatly improve the HER performance. The identification of active species in this work provides an effective strategy to design and synthesize the low‐cost, high‐efficient, and robust CoP‐based electrocatalysts.     

Ultrafine Pt Nanoparticle‐Decorated Pyrite‐Type CoS2 Nanosheet Arrays Coated on Carbon Cloth as a Bifunctional Electrode for Overall Water Splitting

To improve the utilization efficiency of precious metals, metal‐supported materials provide a direction for fabricating highly active and stable heterogeneous catalysts. Herein, carbon cloth (CC)‐supported Earth‐abundant CoS₂ nanosheet arrays (CoS₂/CC) are presented as ideal substrates for ultrafine Pt deposition (Pt‐CoS₂/CC) to achieve remarkable performance toward the hydrogen and oxygen evolution reactions (HER/OER) in alkaline solutions. Notably, the Pt‐CoS₂/CC hybrid delivers an overpotential of 24 mV at 10 mA cm^?2 and a mass activity of 3.89 A Pt_mg^?1, which is 4.7 times higher than that of commercial Pt/C, at an overpotential of 130 mV for catalyzing the HER. An alkali‐electrolyzer using Pt‐CoS₂/CC as a bifunctional electrode enables a water‐splitting current density of 10 mA cm^?2 at a low voltage of 1.55 V and can sustain for more than 20 h, which is superior to that of the state‐of‐the‐art Pt/C+RuO₂ catalyst. Further experimental and theoretical simulation studies demonstrate that strong electronic interaction between Pt and CoS₂ synergistically optimize hydrogen adsorption/desorption behaviors and facilitate the in situ generation of OER active species, enhancing the overall water‐splitting performance. This work highlights the regulation of interfacial and electronic synergy in pursuit of highly efficient and durable supported catalysts for hydrogen and oxygen electrocatalytic applications.     

Active Edge Sites Engineering in Nickel Cobalt Selenide Solid Solutions for Highly Efficient Hydrogen Evolution

An effective multifaceted strategy is demonstrated to increase active edge site concentration in Ni_0.33Co_0.67Se₂ solid solutions prepared by in situ selenization process of nickel cobalt precursor. The simultaneous control of surface, phase, and morphology result in as‐prepared ternary solid solution with extremely high electrochemically active surface area (C _dl = 197 mF cm^?2), suggesting significant exposure of active sites in this ternary compound. Coupled with metallic‐like electrical conductivity and lower free energy for atomic hydrogen adsorption in Ni_0.33Co_0.67Se₂, identified by temperature‐dependent conductivities and density functional theory calculations, the authors have achieved unprecedented fast hydrogen evolution kinetics, approaching that of Pt. Specifically, the Ni_0.33Co_0.67Se₂ solid solutions show a low overpotential of 65 mV at ?10 mV cm^?2, with onset potential of mere 18 mV, an impressive small Tafel slope of 35 mV dec^?1, and a large exchange current density of 184 µA cm^?2 in acidic electrolyte. Further, it is shown that the as‐prepared Ni_0.33Co_0.67Se₂ solid solution not only works very well in acidic electrolyte but also delivers exceptional hydrogen evolution reaction (HER) performance in alkaline media. The outstanding HER performance makes this solid solution a promising candidate for mass hydrogen production.     

Integration of FeOOH and Zeolitic Imidazolate Framework‐Derived Nanoporous Carbon as an Efficient Electrocatalyst for Water Oxidation

As a cost‐effective catalyst for the oxygen evolution reaction (OER), the potential use of FeOOH is hindered by its intrinsic poor electron conductivity. Here, the significant enhancement of OER activity and long‐term stability of electrodeposited FeOOH on zeolitic imidazolate framework‐derived N‐doped porous carbons (NPCs) are reported. In alkaline media, FeOOH/NPC supported on nickel foam as a 3D electrode delivers a current density of 100 mA cm^?2 at a small overpotential of 230 mV and exhibits a low Tafel slope of 33.8 mV dec^?1 as well as excellent durability, making it one of the most active OER catalysts. Such high performance is attributed to a combined effect of the excellent electron conductivity of NPC and the synergy between FeOOH and NiO derived from Ni substrate.     

Single‐Atom to Single‐Atom Grafting of Pt1 onto FeN4 Center: Pt1@FeNC Multifunctional Electrocatalyst with Significantly Enhanced Properties

Nonprecious metal catalysts (NPMCs) Fe?N?C are promising alternatives to noble metal Pt as the oxygen reduction reaction (ORR) catalysts for proton‐exchange‐membrane fuel cells. Herein, a new modulation strategy is reported to the active moiety Fe?N₄ via a precise “single‐atom to single‐atom” grafting of a Pt atom onto the Fe center through a bridging oxygen molecule, creating a new active moiety of Pt₁?O₂?Fe₁?N₄. The modulated Fe?N?C exhibits remarkably improved ORR stabilities in acidic media. Moreover, it shows unexpectedly high catalytic activities toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), with overpotentials of 310 mV for OER in alkaline solution and 60 mV for HER in acidic media at a current density of 10 mA cm^?2, outperforming the benchmark RuO₂ and comparable with Pt/C(20%), respectively. The enhanced multifunctional electrocatalytic properties are associated with the newly constructed active moiety Pt₁?O₂?Fe₁?N₄, which protects Fe sites from harmful species. Density functional theory calculations reveal the synergy in the new active moiety, which promotes the proton adsorption and reduction kinetics. In addition, the grafted Pt₁?O₂? dangling bonds may boost the OER activity. This study paves a new way to improve and extend NPMCs electrocatalytic properties through a precisely single‐atom to single‐atom grafting strategy.