Photoelectrocatalytic Materials for Solar Water Splitting

Photoelectrocatalytic water splitting offers a promising approach to convert sunlight into sustainable hydrogen energy. A thorough understanding of the relationships between the properties and functions of photoelectrocatalytic materials plays a crucial role in the design and fabrication of efficient photoelectrochemical systems for water splitting. This review presents the advances in the development of efficient photoelectrocatalytic materials. First, the fundamentals involved in the photoelectrocatalytic water splitting are elaborated. Then, the critical properties of photoelectrocatalytic materials are classified and discussed according to the associated photoelectrochemical processes, including light absorption, charge separation, charge transportation, and photoelectrocatalytic reactions. The importance of heterointerfaces in photoelectrodes is also mentioned in conjunction with the illustration of some functional interlayer materials. Finally, some strategies that can be employed in material screening and optimization for the construction of highly efficient photoelectrochemical devices for water splitting are also discussed.     

A Floating Sheet for Efficient Photocatalytic Water Splitting

Solar photocatalytic water splitting has been a promising way to provide clean hydrogen energy. There are two weaknesses in the typical photocatalytic process in which photocatalysts are generally dispersing in water under stir. One is the inadequate utilization of light energy and the other one is the cumbersome operation in the recycling procedure. This study demonstrates an efficient solar photocatalytic water splitting using a floating sheet with a novel WSe₂ cocatalyst. The sheet is fabricated by laser‐depositing WSe₂ film on a carbon foam (CF) substrate and drop‐casting of the synthesized nanodiamond‐embedded Cu₂O (NEC) photocatalysts. This is a new‐type artificial photocatalytic system that overcomes the above‐mentioned weaknesses of a powder‐dispersing system. The WSe₂ cocatalyst acts as an electron sink to promote electron–hole separation, resulting in the further improvement of photocatalytic performance. This floating NEC/WSe₂/CF structure achieves efficient water splitting upon simulated solar irradiation with an increased H₂ evolution rate, which is 13.2 times that of the powder‐dispersing system. This study offers a strategy for the design of new‐type photocatalytic system and discovery of alternative noble metal‐free cocatalysts.     

Energetic Efficiency of Hydrogen Photoevolution by Algal Water Splitting

Absolute thermodynamic efficiencies of conversion of light energy into chemical-free energy of molecular hydrogen by intact microalgae have been measured with an original physical measuring technique using a tin-oxide semiconducting gas sensor. Thin films of microalgae comprising of 5 to 20 cellular monolayers have been entrapped on filter paper, thereby constraining them in a well-defined circular geometry. Based on absolute light absorption of visible polychromatic illumination in the low-intensity region of the light saturation curve, conversion efficiencies of 6 to 24% have been obtained. These values are the highest ever measured for hydrogen evolution by green algae.     

Progress in Developing Metal Oxide Nanomaterials for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting represents an environmentally friendly and sustainable method to obtain hydrogen fuel. Semiconductor materials as the central components in PEC water splitting cells have decisive influences on the device's solar‐to‐hydrogen conversion efficiency. Among semiconductors, metal oxides have received a lot of attention due to their outstanding (photo)‐electrochemical stability, low cost, favorable band edge positions and wide distribution of bandgaps. In the past decades, significant processes have been made in developing metal oxide nanomaterials for PEC water splitting. In this review, the recent progress using metal oxides as photoelectrodes and co‐catalysts for PEC water splitting is summarized. Their performance, limitations and potentials are also discussed. Last, the key challenges and opportunities in the development and implementation of metal oxide nanomaterials for PEC water splitting are discussed.     

A Perovskite Nanorod as Bifunctional Electrocatalyst for Overall Water Splitting

The development of highly efficient and low‐cost electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is paramount for water splitting associated with the storage of clean and renewable energy. Here, this study reports its findings in the development of a nanostructured perovskite oxide as OER/HER bifunctional electrocatalyst for overall water splitting. Prepared by a facile electrospinning method, SrNb_0.1Co_0.7Fe_0.2O_3–δ perovskite nanorods (SNCF‐NRs) display excellent OER and HER activity and stability in an alkaline solution, benefiting from the catalytic nature of perovskites and unique structural features. More importantly, the SNCF‐NR delivers a current density of 10 mA cm^?2 at a cell voltage of merely ≈1.68 V while maintaining remarkable durability when used as both anodic and cathodic catalysts in an alkaline water electrolyzer. The performance of this bifunctional perovskite material is among the best ever reported for overall water splitting, offering a cost‐effective alternative to noble metal based electrocatalysts.     

Bandgap Engineering of Organic Semiconductors for Highly Efficient Photocatalytic Water Splitting

The bandgap engineering of semiconductors, in particular low‐cost organic/polymeric photocatalysts could directly influence their behavior in visible photon harvesting. However, an effective and rational pathway to stepwise change of the bandgap of an organic/polymeric photocatalyst is still very challenging. An efficient strategy is demonstrated to tailor the bandgap from 2.7 eV to 1.9 eV of organic photocatalysts by carefully manipulating the linker/terminal atoms in the chains via innovatively designed polymerization. These polymers work in a stable and efficient manner for both H₂ and O₂ evolution at ambient conditions (420 nm < λ < 710 nm), exhibiting up to 18 times higher hydrogen evolution rate (HER) than a reference photocatalyst g‐C₃N₄ and leading to high apparent quantum yields (AQYs) of 8.6%/2.5% at 420/500 nm, respectively. For the oxygen evolution rate (OER), the optimal polymer shows 19 times higher activity compared to g‐C₃N₄ with excellent AQYs of 4.3%/1.0% at 420/500 nm. Both theoretical modeling and spectroscopic results indicate that such remarkable enhancement is due to the increased light harvesting and improved charge separation. This strategy thus paves a novel avenue to fabricate highly efficient organic/polymeric photocatalysts with precisely tunable operation windows and enhanced charge separation.     

Water Splitting Progress in Tandem Devices: Moving Photolysis beyond Electrolysis

Water photolysis is a sustainable technology to convert natural solar energy and water into chemical fuels and is thus considered a thorough solution to the forthcoming energy crises. Unassisted water splitting that could directly harvest solar light and subsequently split water in a single device has become an important research theme. Three types of tandem devices including photoelectrochemical (PEC), photovoltaic (PV) cell/PEC and PV/electrolyser tandem cells are proposed to realize water photolysis at different levels of integration and component. Recent progress in tandem water splitting devices is summarized, and crucial issues on device optimization from the perspective of each photo‐absorber functionalities in band edge potential, light absorptivity and transmittance are discussed. By increasing the performances of stand‐alone PEC or PV devices, a 20% solar to hydrogen efficiency is predicted that is a significant value towards further application in practice. Accordingly, the challenges for materials development and configuration optimization are further outlined.     

New Insights into Defect‐Mediated Heterostructures for Photoelectrochemical Water Splitting

Understanding the interfacial electronic structures of heterojunctions, a challenging undertaking, is extremely important to the design of photoelectrodes for efficient water splitting. The heterostructured interfaces in terms of crystal defects at the atomic‐level exemplified by TiO₂/BiVO₄ are studied. Results from both experimental observations and theoretical calculations clearly confirm the spontaneous formation of defective interfaces in the heterostructures. TiO₂/BiVO₄ junction with engineered interfacial defects can efficiently increase the carrier density and extend the lifetime of electrons. The inherent phenomenon of defective electronic structures in different heterostructures creates a significant impact on their photoelectrochemical performance. The synergetic effect between defect‐mediated mechanism and organic quantum dots sensitization yields significantly increased photoconversion efficiency, which is even superior to that of common metal sulfide sensitized ones. This result demonstrates an approach worthy for the design and fabrication of defect‐mediated heterostructures for water splitting, without utilizing harmful metal sulfides. Moreover, new insights into the influence of intrinsic defects on the interfacial charge transfer process between two different semiconductors for energy‐related applications have also been provided.     

Bismuth Tantalum Oxyhalogen: A Promising Candidate Photocatalyst for Solar Water Splitting

As wide range of light absorption and suitable redox potentials are prerequisites for photocatalytic water splitting, exploring new semiconductor‐based materials with proper band structures for water splitting still calls for longstanding efforts. In this work, a series of photocatalysts, bismuth tantalum oxyhalide, Bi₄TaO₈X (X = Cl, Br), with valence band and conduction band positions at ≈?0.70 and ≈1.80 eV versus the reversible hydrogen electrode (RHE), respectively, are found to be capable for both water oxidation and reduction under visible light irradiation. Using flux synthetic methods, Bi₄TaO₈X (X = Cl, Br) with microplatelet morphology can be successfully prepared. The photocatalyst based on these materials shows an apparent quantum efficiency as high as 20% at 420 nm for water oxidation. In addition, a Z‐scheme system coupling Bi₄TaO₈Br with Ru/SrTiO₃:Rh is successfully achieved for overall water splitting with a stoichiometric ratio of H₂ and O₂ evolutions. This work demonstrates a new series of semiconductors Bi₄TaO₈X (X = Cl, Br) with the promising application in the field of solar energy utilization.     

Building Electron/Proton Nanohighways for Full Utilization of Water Splitting Catalysts

Low electron/proton conductivities of electrochemical catalysts, especially earth‐abundant nonprecious metal catalysts, severely limit their ability to satisfy the triple‐phase boundary (TPB) theory, resulting in extremely low catalyst utilization and insufficient efficiency in energy devices. Here, an innovative electrode design strategy is proposed to build electron/proton transport nanohighways to ensure that the whole electrode meets the TPB, therefore significantly promoting enhance oxygen evolution reactions and catalyst utilizations. It is discovered that easily accessible/tunable mesoporous Au nanolayers (AuNLs) not only increase the electrode conductivity by more than 4000 times but also enable the proton transport through straight mesopores within the Debye length. The catalyst layer design with AuNLs and ultralow catalyst loading (≈0.1 mg cm^?2) augments reaction sites from 1D to 2D, resulting in an 18‐fold improvement in mass activities. Furthermore, using microscale visualization and unique coplanar‐electrode electrolyzers, the relationship between the conductivity and the reaction site is revealed, allowing for the discovery of the conductivity‐determining and Debye‐length‐determining regions for water splitting. These findings and strategies provide a novel electrode design (catalyst layer + functional sublayer + ion exchange membrane) with a sufficient electron/proton transport path for high‐efficiency electrochemical energy conversion devices.