Balancing Light Absorption and Charge Transport in Vertical SnS2 Nanoflake Photoanodes with Stepped Layers and Large Intrinsic Mobility

Significant optical absorption in the blue–green spectral range, high intralayer carrier mobility, and band alignment suitable for water splitting suggest tin disulfide (SnS₂) as a candidate material for photo‐electrochemical applications. In this work, vertically aligned SnS₂ nanoflakes are synthesized directly on transparent conductive substrates using a scalable close space sublimation (CSS) method. Detailed characterization by time‐resolved terahertz and time‐resolved photoluminescence spectroscopies reveals a high intrinsic carrier mobility of 330 cm² V^?1 s^?1 and photoexcited carrier lifetimes of 1.3 ns in these nanoflakes, resulting in a long vertical diffusion length of ≈1 µm. The highest photo‐electrochemical performance is achieved by growing SnS₂ nanoflakes with heights that are between this diffusion length and the optical absorption depth of ≈2 µm, which balances the competing requirements of charge transport and light absorption. Moreover, the unique stepped morphology of these CSS‐grown nanoflakes improves photocurrent by exposing multiple edge sites in every nanoflake. The optimized vertical SnS₂ nanoflake photoanodes produce record photocurrents of 4.5 mA cm^?2 for oxidation of a sulfite hole scavenger and 2.6 mA cm^?2 for water oxidation without any hole scavenger, both at 1.23 V_RHE in neutral electrolyte under simulated AM1.5G sunlight, and stable photocurrents for iodide oxidation in acidic electrolyte.     

Overcoming Charge Collection Limitation at Solid/Liquid Interface by a Controllable Crystal Deficient Overlayer

Bulk and surface charge recombination of photoelectrode are two key processes that significantly hinder solar‐to‐fuel conversion of photoelectrochemical cell (PEC). In this study, the function of a “crystal‐deficient” overlayer is unveiled, which outperforms a traditionally used amorphous or crystalline overlayer in PEC water splitting by exhibiting a high conductivity and large electron diffusion length to enable unlimited electron collection. The optimized ≈2.5 nm thickness of the “crystal‐deficient” shell results in a depletion layer with a width of 3 nm, which overcomes the flat band limitation of the photovoltage and increases the light absorptivity in the wavelength range from 300 to 420 nm. In addition, a 50‐fold increase in the conductivity yields a one‐order‐of‐magnitude increase in the diffusion length of an electron (L_n )(≈20 μm), allowing for unlimited electron collection in the 1.9 μm TiO₂ nanowire array with the “crystal‐deficient” shell. The controllable “crystal‐deficient” overlayer in rutile TiO₂ nanowires photoanode achieves a photocurrent density greater than 2.0 mA cm^?2 at 1.23 V versus reversible hydrogen electrode (RHE), a 1.18% applied bias photon‐to‐current efficiency at 0.49 V versus RHE, a faradaic efficiency greater than 93.5% at 0.6 V versus Pt under air mass 1.5G simulated solar light illumination (100 mW cm^?2).     

Facile and Efficient Atomic Hydrogenation Enabled Black TiO2 with Enhanced Photo‐Electrochemical Activity via a Favorably Low‐Energy‐Barrier Pathway

Black TiO₂ has demonstrated a great potential for a variety of renewable energy technologies. However, its practical application is heavily hindered due to lack of efficient hydrogenation methods and a deeper understanding of hydrogenation mechanisms. Here, a simple and straightforward hot wire annealing (HWA) method is presented to prepare black TiO₂ (H–TiO₂) nanorods with enhanced photo‐electrochemical (PEC) activity by means of atomic hydrogen [H]. Compared to conventional molecular hydrogen approaches, the HWA shows remarkable effectiveness without any detrimental side effects on the device structure, and simultaneously the photocurrent density of H–TiO₂ reaches 2.5 mA cm^?2 (at 1.23 V vs reversible hydrogen electrode (RHE)). Due to the controllable and reproducible [H] flux, the HWA can be developed as a standard hydrogenation method for black TiO₂. Meanwhile, the relationships between the wire temperatures, structural, optical, and photo‐electrochemical properties are systematically investigated to verify the improved PEC activity. Furthermore, the density functional theory (DFT) study provides a comprehensive insight not only into the highly efficient mechanism of the HWA approach but also its favorably low‐energy‐barrier hydrogenation pathway. The findings will have a profound impact on the broad energy applications of H–TiO₂ and contribute to the fundamental understanding of its hydrogenation.     

Retarded Charge–Carrier Recombination in Photoelectrochemical Cells from Plasmon‐Induced Resonance Energy Transfer

N‐type metal oxides such as hematite (α‐Fe₂O₃) and bismuth vanadate (BiVO₄) are promising candidate materials for efficient photoelectrochemical water splitting; however, their short minority carrier diffusion length and restricted carrier lifetime result in undesired rapid charge recombination. Herein, a 2D arranged globular Au nanosphere (NS) monolayer array with a highly ordered hexagonal hole pattern (hereafter, Au array) is introduced onto the surface of photoanodes comprised of metal oxide films via a facile drying and transfer‐printing process. Through plasmon‐induced resonance energy transfer, the Au array provides a strong electromagnetic field in the near‐surface area of the metal oxide film. The near‐field coupling interaction and amplification of the electromagnetic field suppress the charge recombination with long‐lived photogenerated holes and simultaneously enhance the light harvesting and charge transfer efficiencies. Consequently, an over 3.3‐fold higher photocurrent density at 1.23 V versus reversible hydrogen electrode (RHE) is achieved for the Au array/α‐Fe₂O₃. Furthermore, the high versatility of this transfer printing of Au arrays is demonstrated by introducing it on the molybdenum‐doped BiVO₄ film, resulting in 1.5‐fold higher photocurrent density at 1.23 V versus RHE. The tailored metal film design can provide a potential strategy for the versatile application in various light‐mediated energy conversion and optoelectronic devices.     

3D Porous Pyramid Heterostructure Array Realizing Efficient Photo‐Electrochemical Performance

Direct photo‐electrochemical (PEC) water splitting is of great practical interest for developing a sustainable energy systems, but remains a big challenge owing to sluggish charge separation, low efficiency, and poor stability. Herein, a 3D porous In₂O₃/In₂S₃ pyramid heterostructure array on a fluorine‐doped tin oxide substrate is fabricated by an ion exchange–induced synthesis strategy. Based on the synergistic structural and electronic modulations from density functional theory calculations and experimental observations, 3D porous In₂O₃/In₂S₃ photoanode by the protective layer delivers a low onset potential of ≈0.02 V versus reversible hydrogen electrode (RHE), the highest photocurrent density of 8.2 mA cm^?2 at 1.23 V versus RHE among all the In₂S₃ photoanodes reported to date, an incident photon‐to‐current efficiency of 76% at 400 nm, and high stability over 20 h for PEC water splitting are reported. This work provides an alternative promising prototype for the design and construction of novel heterostructures in robust PEC water splitting applications.     

Creation of 3D Textured Graphene/Si Schottky Junction Photocathode for Enhanced Photo‐Electrochemical Efficiency and Stability

This work presents a novel photo‐electrochemical architecture based on the 3D pyramid‐like graphene/p‐Si Schottky junctions. Overcoming the conventional transfer technique by which only planar graphene/Si Schottky junctions are currently available, this work demonstrates the 3D pyramid‐like graphene/p‐Si Schottky junction photocathode, which greatly enhances light harvesting efficiency and exhibits promising photo‐electrochemical performance for hydrogen generation. The formation of 3D pyramid‐like graphene/p‐Si Schottky junctions exhibits enhanced electrochemical activity and promotes charge separation efficiency compared with the bare pyramid Si surface without graphene. The inherent chemical inertness of graphene significantly improves the operational stability of 3D graphene/p‐Si Schottky junction photo‐electrochemical cells. The 3D pyramid‐like graphene/p‐Si Schottky junction photocathode delivers an onset potential of 0.41 V and a saturated photocurrent density of ?32.5 mA cm^?2 at 0 V (vs RHE) with excellent stability comparable to values reported for textured or nanostructured p‐Si photocathodes coated with ultrathin oxide layers by the conventional atomic layer deposition technique. These results suggest that the formation of graphene/Si Schottky junctions with a 3D architecture is a promising approach to improve the performance and durability of Si‐based photo‐electrochemical systems for water splitting or solar‐to‐fuel conversion.     

Efficient and Stable TiO2:Pt–Cu(In,Ga)Se2 Composite Photoelectrodes for Visible Light Driven Hydrogen Evolution

Novel thin film composite photocathodes based on device‐grade Cu(In,Ga)Se₂ chalcopyrite thin film absorbers and transparent conductive oxide Pt‐implemented TiO₂ layers on top are presented for an efficient and stable solar‐driven hydrogen evolution. Thin films of phase‐pure anatase TiO₂ are implemented with varying Pt‐concentrations in order to optimize simultaneously i) conductivity of the films, ii) electrocatalytic activity, and iii) light‐guidance toward the chalcopyrite. Thereby, high incident‐photon‐to‐current‐efficiencies of more than 80% can be achieved over the full visible light range. In acidic electrolyte (pH 0.3), the most efficient Pt‐implemented TiO₂–Cu(In,Ga)Se₂ composite electrodes reveal i) photocurrent densities up to 38 mA cm^?2 in the saturation region (?0.4 V RHE, reversible hydrogen electrode), ii) 15 mA cm^?2 at the thermodynamic potential for H₂‐evolution (0 V RHE), and iii) an anodic onset potential shift for the hydrogen evolution (+0.23 V RHE). It is shown that the gradual increase of the Pt‐concentration within the TiO₂ layers passes through an efficiency‐ and stability‐maximum of the device (5 vol% of Pt precursor solution). At this maximum, optimized light‐incoupling into the device‐grade chalcopyrite light‐absorber as well as electron conductance properties within the surface layer are achieved while no degradation are observed over more than 24 h of operation.     

MOF‐Based Transparent Passivation Layer Modified ZnO Nanorod Arrays for Enhanced Photo‐Electrochemical Water Splitting

This study introduces zeolitic imidazolate framework‐8 (ZIF‐8) as the first metal‐organic framework based transparent surface passivation layer for photo‐electrochemical (PEC) water splitting. A significant enhancement for PEC water oxidation is demonstrated based on the in situ seamless coating of ZIF‐8 surface passivation layer on Ni foam (NF) supported ZnO nanorod arrays photoanode. The PEC performance is improved by optimizing the ZIF‐8 thickness and by grafting Ni(OH)₂ nanosheets as synergetic co‐catalyst. With respect to ZnO/NF, the optimized Ni(OH)₂/ZIF‐8/ZnO/NF photoanode exhibits a two times larger photocurrent density of 1.95 mA cm^?2 and also a two times larger incident photon to current conversion efficiency of 40.05% (350 nm) at 1.23 V versus RHE (V_RHE) under AM 1.5 G. The synergetic surface passivation and the co‐catalyst modification contribute to prolonging the charge lifetime, to promoting the charge transfer, and to decreasing the overpotential for water oxidation.     

(040)‐Crystal Facet Engineering of BiVO4 Plate Photoanodes for Solar Fuel Production

A (040)‐crystal facet engineered BiVO₄ ((040)‐BVO) photoanode is investigated for solar fuel production. The (040)‐BVO photoanode is favorable for improved charge carrier mobility and high photocatalytic active sites for solar light energy conversion. This crystal facet design of the (040)‐BVO photoanode leads to an increase in the energy conversion efficiency for solar fuel production and an enhancement of the oxygen evolution rate. The photocurrent density of the (040)‐BVO photoanode is determined to be 0.94 mA cm^?2 under AM 1.5 G illumination and produces 42.1% of the absorbed photon‐to‐current conversion efficiency at 1.23 V (vs RHE, reversible hydrogen electrode). The enhanced charge separation efficiency and improved charge injection efficiency driven by (040) facet can produce hydrogen with 0.02 mmol h^?1 at 1.23 V. The correlation between the (040)‐BVO photoanode and the solar fuel production is investigated. The results provide a promising approach for the development of solar fuel production using a BiVO₄ photoanode.     

Moisture‐Assisted Preparation of Compact GaN:ZnO Photoanode Toward Efficient Photoelectrochemical Water Oxidation

Developing strategies that can promote charge transportation in photodevices is crucial for achieving high solar energy conversion efficiency. Herein a moisture‐assisted nitridation approach is presented for the fabrication of efficient gallium‐zinc oxynitride (GaN:ZnO) photoanode with compact structure to facilitate the charge transportation. With moisture‐assisted nitridation, the charge separation efficiency and injection efficiency obtained on GaN:ZnO photoanode are significantly enhanced. Correspondingly, the photocurrent at 1.23 V vs reversible hydrogen electrode (RHE) has 18 folds improvement compared with that prepared without moisture assistance. Furthermore, via treating with HCl acid and modification with cobalt phosphate (CoPi) as a cocatalyst, state‐of‐the‐art photocurrent over 2.0 mA cm^?2 is achieved on independent GaN:ZnO photoanode when bias is higher than 1.4 V vs RHE. To the best of our knowledge, this is the first paradigm of moisture‐assisted preparing oxynitride‐based photoanode. The participation of moisture is found to improve the interconnection between adjacent GaN:ZnO nanoparticles as well as that between the GaN:ZnO film and the underlying substrate. Moreover, the volatilization of Zn can be substantially suppressed due to the modulation of reaction pathway by moisture. These two factors are confirmed to be the main reasons for the enhanced charge transportation and PEC performance obtained on GaN:ZnO photoanode.     

Scalable Triple Cation Mixed Halide Perovskite–BiVO4 Tandems for Bias‐Free Water Splitting

Strong interest exists in the development of organic–inorganic lead halide perovskite photovoltaics and of photoelectrochemical (PEC) tandem absorber systems for solar fuel production. However, their scalability and durability have long been limiting factors. In this work, it is revealed how both fields can be seamlessly merged together, to obtain scalable, bias‐free solar water splitting tandem devices. For this purpose, state‐of‐the‐art cesium formamidinium methylammonium (CsFAMA) triple cation mixed halide perovskite photovoltaic cells with a nickel oxide (NiO_x) hole transport layer are employed to produce Field's metal‐epoxy encapsulated photocathodes. Their stability (up to 7 h), photocurrent density (–12.1 ± 0.3 mA cm^?2 at 0 V versus reversible hydrogen electrode, RHE), and reproducibility enable a matching combination with robust BiVO₄ photoanodes, resulting in 0.25 cm² PEC tandems with an excellent stability of up to 20 h and a bias‐free solar‐to‐hydrogen efficiency of 0.35 ± 0.14%. The high reliability of the fabrication procedures allows scaling of the devices up to 10 cm², with a slight decrease in bias‐free photocurrent density from 0.39 ± 0.15 to 0.23 ± 0.10 mA cm^?2 due to an increasing series resistance. To characterize these devices, a versatile 3D‐printed PEC cell is also developed.     

Engineering of Mesoscale Pores in Balancing Mass Loading and Rate Capability of Hematite Films for Electrochemical Capacitors

Design and synthesis of metal oxide‐based pseudocapacitive materials to simultaneously achieve high mass loading (e.g., up to 10 mg cm^?2) and excellent rate capability for electrochemical capacitors is a long‐lasting challenge. These two characteristics are usually mutually exclusive due to the poor ion diffusion kinetics of most metal oxides. Here, a glucose‐assisted hydrothermal method to prepare thick hematite film (>1 µm) with engineerable mesopore size through controlled variation of glucose concentration is demonstrated. The capability of controlling the size of mesopores offers a unique opportunity to investigate for the first time the interplay between mesopore size and electrochemical performance of hematite films. The hematite film with an average mesopore size of 3 nm at an ultrahigh loading of 10 mg cm^?2 exhibits an areal capacitance of 1502 mF cm^?2 at 1 mA cm^?2, and retains 871.2 mF cm^?2 at 50 mA cm^?2. Such performance, to the best of the authors' knowledge, is at the top of the reported hematite electrodes with comparable or even lower mass loadings. The strategy demonstrated herein may be extended to fabricate diverse types of mesoporous metal oxide architectures with improved ion diffusion kinetics, which is critical for a broad range of devices for energy storage and conversion.     

Geogrid‐Inspired Nanostructure to Reinforce a CuxZnySnzS Nanowall Electrode for High‐Stability Electrochemical Energy Conversion Devices

Inspired by geogrids commonly applied in construction engineering to reinforce side slopes and retaining walls, the use of a “nano‐geogrid” to reinforce a Cu_x Zn_y Sn_z S (CZTS) nanowall electrode for application in electrochemical reactions is demonstrated. The CZTS nanowall electrode reinforced by the nano‐geogrid (denoted as NWD) shows not only remarkable mechanical and electrochemical stability but also considerable electrochemical performances. The NWD demonstrated as a counter electrode in a dye‐sensitized solar cell shows a power conversion efficiency of 7.44 ± 0.04%, comparable with the device using Pt as electrode, and also significantly improves device stability as compared with that afforded by an electrode comprising a CZTS nanowall without the nano‐geogrid (denoted as NOD). In addition, applying the NWD electrode as a cathode in photo‐electrochemical hydrogen evolution reactions (HERs) yields a photocurrent density of ?10 mA cm^?2 at ?0.162 V (vs RHE) under AM 1.5 illumination. Moreover, when HERs are conducted under extreme conditions, the NWD electrode remains intact, whereas the NOD electrode is completely peeled off after 10 min of reaction. Therefore, the concept of using a mimetic rational nanostructure could pave the way for the possibility of improving the performance and stability of various devices.     

Photoelectrochemical Wiring of Paulschulzia pseudovolvox (Algae) to Osmium Polymer Modified Electrodes for Harnessing Solar Energy

Studies on biological photovoltaics based on intact organisms are challenging and in most cases include diffusing mediators to facilitate electrochemical communication with electrodes. However, using such mediators is impractical. Instead, surface confined Os‐polymers have been successfully used in electrochemical studies including oxidoreductases and bacterial cells but not with algae. Photoelectrogenic activity of a green alga, Paulschulzia pseudovolvox, immobilized on graphite or Os‐polymer modified graphite is demonstrated. Direct electron transfer is revealed, when no mediator is added, between algae and electrodes with electrons emerging from photolysis of water via the cells to the electrode exhibiting a photocurrent density of 0.02 μA cm^?2. Os‐polymers with different redox potentials and structures are used to optimize the energy gap between the photosynthetic complexes of the cells and the Os‐polymers and those of greater solubility, better accessibility with membranes, and relatively higher potentials yielded a photocurrent density of 0.44 μA cm^?2. When benzoquinone is included to the electrolyte, the photocurrent density reaches 6.97 μA cm^?2. The photocurrent density is improved to 11.50 μA cm^?2, when the cells are protected from reactive oxygen species when either superoxide dismutase or catalase is added. When adding an inhibitor specific for photosystem II, diuron, the photocurrent is decreased by 50%.     

A Delaminated Defect‐Rich ZrO2 Hierarchical Nanowire Photocathode for Efficient Photoelectrochemical Hydrogen Evolution

An efficient way to combat the energy crisis and the greenhouse gas effect of fossil fuels is the production of hydrogen fuel from solar‐driven water splitting reaction. Here, this study presents a p‐type ZrO₂ nanoplate‐decorated ZrO₂ nanowire photocathode with a high photoconversion efficiency that makes it potentially viable for commercial solar H₂ production. The composition of oxygen vacancy defects, low charge carrier transport property, and high specific surface area of these as‐grown hierarchical nanowires are further improved by an hydrofluoric acid (HF) treatment, which causes partial delamination and produces a thin amorphous ZrO₂ layer on the surface of the as‐grown nanostructured film. The presence of different types of oxygen vacancies (neutral, singly charged, and doubly charged defects) and their compositional correlation to the Zr^x+ oxidation states (4 > x > 2) are found to affect the charge transfer process, the p‐type conductivity, and the photocatalytic activity of the ZrO₂ nanostructured film. The resulting photocathode provides the highest overall photocurrent (?42.3 mA cm^?2 at 0 V vs reversible hydrogen electrode (RHE)) among all the photocathodes reported to date, and an outstanding 3.1% half‐cell solar‐to‐hydrogen conversion efficiency with a Faradaic efficiency of 97.8%. Even more remarkable is that the majority of the photocurrent (69%) is produced in the visible light region.     

Efficient Plasmonic Au/CdSe Nanodumbbell for Photoelectrochemical Hydrogen Generation beyond Visible Region

In this communication, light harvesting and photoelectrochemical (PEC) hydrogen generation beyond the visible region are realized by an anisotropic plasmonic metal/semiconductor hybrid photocatalyst with precise control of their topology and heterointerface. Controlling the intended configuration of the photocatalytic semiconductor to anisotropic Au nanorods' plasmonic hot spots, through a water phase cation exchange strategy, the site‐selective overgrowth of a CdSe shell evolving from a core/shell to a nanodumbbell is realized successfully. Using this strategy, tip‐preferred efficient photoinduced electron/hole separation and plasmon enhancement can be realized. Thus, the PEC hydrogen generation activity of the Au/CdSe nanodumbbell is 45.29 µmol cm^?2 h^?1 (nearly 4 times than the core/shell structure) beyond vis (λ > 700 nm) illumination and exhibits a high faradic efficiency of 96% and excellent stability with a constant photocurrent for 5 days. Using surface photovoltage microscopy, it is further demonstrated that the efficient plasmonic hot charge spatial separation, which hot electrons can inject into CdSe semiconductors, leads to excellent performance in the Au/CdSe nanodumbbell.     

Extended Light Harvesting with Dual Cu2O‐Based Photocathodes for High Efficiency Water Splitting

Cu₂O is one of the most promising light absorbing materials for solar energy conversion. Previous studies with Cu₂O for water splitting usually deliver high photocurrent or high photovoltage, but not both. Here, a Cu₂O/Ga₂O₃/TiO₂/RuO_x photocathode that benefits from a high quality thermally oxidized Cu₂O layer and good band alignment of the Ga₂O₃ buffer layer is reported, yielding a photocurrent of 6 mA cm^?2 at 0 V versus reversible hydrogen electrode (RHE), an onset potential of 0.9 V versus RHE, and 3.5 mA cm^?2 at 0.5 V versus RHE. The quantum efficiency spectrum (incident photon to current efficiency, IPCE) reveals a dramatically improved green/red response and a decreased blue response compared with electrodeposited Cu₂O films. Light intensity dependence and photocurrent transient studies enable the identification of the limitations in the performance. Due to the complementary IPCE curves of thermally oxidized and electrodeposited Cu₂O photocathodes, a dual photocathode is fabricated to maximize the absorption over the entire range of above band gap radiation. Photocurrents of 7 mA cm^?2 at 0 V versus RHE are obtained in the dual photocathodes, with an onset potential of 0.9 V versus RHE and a thermodynamically based energy conversion efficiency of 1.9%.     

Barium Bismuth Niobate Double Perovskite/Tungsten Oxide Nanosheet Photoanode for High‐Performance Photoelectrochemical Water Splitting

Recently, a new method to effectively engineer the bandgap of barium bismuth niobate (BBNO) double perovskite was reported. However, the planar electrodes based on BBNO thin films show low photocurrent densities for water oxidation owing to their poor electrical conductivity. Here, it is reported that the photoelectrochemical (PEC) activity of BBNO‐based electrodes can be dramatically enhanced by coating thin BBNO layers on tungsten oxide (WO₃) nanosheets to solve the poor conductivity issue while maintaining strong light absorption. The PEC activity of BBNO/WO₃ nanosheet photoanodes can be further enhanced by applying Co_0.8Mn_0.2O_x nanoparticles as a co‐catalyst. A photocurrent density of 6.02 mA cm^?2 at 1.23 V (vs reversible hydrogen electrode (RHE)) is obtained using three optically stacked, but electrically parallel, BBNO/WO₃ nanosheet photoanodes. The BBNO/WO₃ nanosheet photoanodes also exhibit excellent stability in a high‐pH alkaline solution; the photoanodes demonstrate negligible photocurrent density decay while under continuous PEC operation for more than 7 h. This work suggests a viable approach to improve the PEC performance of BBNO absorber‐based devices.     

3D Printing of Tunable Energy Storage Devices with Both High Areal and Volumetric Energy Densities

Developing advanced supercapacitors with both high areal and volumetric energy densities remains challenging. In this work, self‐supported, compact carbon composite electrodes are designed with tunable thickness using 3D printing technology for high‐energy‐density supercapacitors. The 3D carbon composite electrodes are composed of the closely stacked and aligned active carbon/carbon nanotube/reduced graphene oxide (AC/CNT/rGO) composite filaments. The AC microparticles are uniformly embedded in the wrinkled CNT/rGO conductive networks without using polymer binders, which contributes to the formation of abundant open and hierarchical pores. The 3D‐printed ultrathick AC/CNT/rGO composite electrode (ten layers) features high areal and volumetric mass loadings of 56.9 mg cm^?2 and 256.3 mg cm^?3, respectively. The symmetric cell assembled with the 3D‐printed thin GO separator and ultrathick AC/CNT/rGO electrodes can possess both high areal and volumetric capacitances of 4.56 F cm^?2 and 10.28 F cm^?3, respectively. Correspondingly, the assembled ultrathick and compact symmetric cell achieves high areal and volumetric energy densities of 0.63 mWh cm^?2 and 1.43 mWh cm^?3, respectively. The all‐component extrusion‐based 3D printing offers a promising strategy for the fabrication of multiscale and multidimensional structures of various high‐energy‐density electrochemical energy storage devices.     

Ni/Fe Codoped In2S3 Nanosheet Arrays Boost Photo‐Electrochemical Performance of Planar Si Photocathodes

The photo‐electrochemical performance of the Si photocathode is seriously restricted by the severe charge recombination at the Si/electrolyte interface and sluggish hydrogen evolution reaction (HER) kinetics. Herein, a facile hydrothermal process is reported to integrate Ni/Fe codoped In₂S₃ nanosheet arrays onto the surface of unmodified a p‐Si photocathode for water reduction. The experimental results and density functional theory calculations indicate that the Ni and Fe codoping of In₂S₃ contributes to small surface transfer impedance, prolonged carrier lifetime, increased charge carrier concentration, and reduced overpotential for HER. Moreover, a p–n junction formed at the interface of Si and Ni/Fe:In₂S₃ promotes the photogenerated electron–hole separation and reduces the recombination in the bulk. As a result, the Si–Ni/Fe:In₂S₃ photocathode exhibits high performance with significantly enhanced photocurrent of ?80.9 mA cm^?2 at ?1.3 V_RHE and positive onset potential of 0.44 V_RHE.