In Situ Transmission Electron Microscopy on Energy‐Related Catalysis

Energy‐related catalytic reactions have been extensively investigated in past years in order to efficiently utilize clean and environmentally benign energy sources. In these systems, the catalysts and the catalyst/active medium interfaces play a crucial role in determining their performance. Thus, understanding the physical and chemical properties of catalysts during reactions is of importance to provide fundamental insights for designing the devices. Transmission electron microscopy can provide tremendous information regarding materials' morphology, microstructure, and chemical properties at nanoscales. With in situ electron microscopy, dynamic processes of catalytic reactions in both gas and liquid environments have been investigated in real time. In this paper, the recent research progress of in situ and operando electron microscopy techniques are introduced with the representative works in energy‐related reactions, including electrochemical catalysis in liquid media and heterogeneous catalysis in gas media. The uniqueness of the specific electron microscopy methods and scientific merits of each work are highlighted. Finally, outlooks on emerging research opportunities are discussed.     

Weak Electron Phonon Coupling and Deep Level Impurity for High Thermoelectric Performance Pb1−xGaxTe

High ZT of 1.34 at 766 K and a record high average ZT above 1 in the temperature range of 300‐864 K are attained in n‐type PbTe by engineering the temperature‐dependent carrier concentration and weakening electron–phonon coupling upon Ga doping. The experimental studies and first principles band structure calculations show that doping with Ga introduces a shallow level impurity contributing extrinsic carriers and imparts a deeper impurity level that ionizes at higher temperatures. This adjusts the carrier concentration closer to the temperature‐dependent optimum and thus maximizes the power factor in a wide temperature range. The maximum power factor of 35 µW cm⁻¹ K⁻² is achieved for the Pb_0.98Ga_0.02Te compound, and is maintained over 20 µWcm⁻¹ K⁻² from 300 to 767 K. Band structure calculations and X‐ray photoelectron spectroscopy corroborate the amphoteric role of Ga in PbTe as the origin of shallow and deep levels. Additionally, Ga doping weakens the electron–phonon coupling, leading to high carrier mobilities in excess of 1200 cm² V⁻¹ s⁻¹. Enhanced point defect phonon scattering yields a reduced lattice thermal conductivity. This work provides a new avenue, beyond the conventional shallow level doping, for further improving the average ZT in thermoelectric materials.     

Strong Visible‐Light Absorption and Hot‐Carrier Injection in TiO2/SrRuO3 Heterostructures

Correlated electron oxides prove a diverse landscape of exotic materials' phenomena and properties. One example of such a correlated oxide material is strontium ruthenate (SrRuO₃) which is known to be a metallic itinerant ferromagnet and for its widespread utility as a conducting electrode in oxide heterostructures. We observe that the complex electronic structure of SrRuO₃ is also responsible for unexpected optical properties including high absorption across the visible spectrum (commensurate with a low band gap semiconductor) and remarkably low reflection compared to traditional metals. By coupling this material to a wide band gap semiconductor (TiO₂) we demonstrate dramatically enhanced visible light absorption and large photocatalytic activities. The devices function by photo‐excited hot‐carrier injection from the SrRuO₃ to the TiO₂ and the effect is enhanced in thin films due to electronic structure changes. This observation provides an exciting new approach to the challenge of designing visible‐light photosensitive materials.     

Multifunctional Transition Metal‐Based Phosphides in Energy‐Related Electrocatalysis

The exploitation of cheap and efficient electrocatalysts is the key to make energy‐related electrocatalytic techniques commercially viable. In recent years, transition metal phosphides (TMPs) electrocatalysts have gained a great deal of attention owing to their multifunctional active sites, tunable structure, and composition, as well as unique physicochemical properties. This review summarizes the up‐to‐date progress on TMPs in energy‐related electrocatalysis from diversified synthetic methods, ingenious‐modulated strategies, and novel applications. In order to set forth theory–structure–performance relationships upon TMPs, the corresponding reaction mechanisms, electrocatalytsts' structure/composition designs and desired electrochemical performance are jointly discussed, along with demonstrating their practical electrocatalytic applications in overall water splitting, metal–air batteries, lithium–sulfur batteries, etc. In the end, some underpinning issues and research orientations of TMPs toward efficient energy‐related electrocatalysis are briefly proposed.     

Grain Boundary Scattering of Charge Transport in n‐Type (Hf,Zr)CoSb Half‐Heusler Thermoelectric Materials

High thermoelectric figure of merit zT of ≈1.0 has been reported in both n‐ and p‐type (Hf,Zr)CoSb‐based half‐Heusler compounds, and further improvement of thermoelectric performance relies on the insightful understanding of electron and phonon transport mechanisms. In this work, the thermoelectric transport features are analyzed for (Hf_0.3Zr_0.7)_1?xNb_xCoSb (x = 0.02–0.3) with a wide range of carrier concentration. It is found that, although both temperature and energy dependencies of charge transport resemble ionized impurity scattering, the grain boundary scattering is the dominant scattering mechanism near room temperature. With increasing carrier concentration and grain size, the influence of the grain boundary scattering on electron transport weakens. The dominant scattering mechanism changes from grain boundary scattering to acoustic phonon scattering as temperature rises. The lattice thermal conductivity decreases with increasing Nb doping content due to the increased strain field fluctuations. These results provide an in‐depth understanding of the transport mechanisms and guidance for further optimizing thermoelectric properties of half‐Heusler alloys and other thermoelectric systems.     

Elucidating the Irreversible Mechanism and Voltage Hysteresis in Conversion Reaction for High‐Energy Sodium–Metal Sulfide Batteries

Irreversible electrochemical behavior and large voltage hysteresis are commonly observed in battery materials, in particular for materials reacting through conversion reaction, resulting in undesirable round‐trip energy loss and low coulombic efficiency. Seeking solutions to these challenges relies on the understanding of the underlying mechanism and physical origins. Here, this study combines in operando 2D transmission X‐ray microscopy with X‐ray absorption near edge structure, 3D tomography, and galvanostatic intermittent titration techniques to uncover the conversion reaction in sodium–metal sulfide batteries, a promising high‐energy battery system. This study shows a high irreversible electrochemistry process predominately occurs at first cycle, which can be largely linked to Na ion trapping during the first desodiation process and large interfacial ion mobility resistance. Subsequently, phase transformation evolution and electrochemical reaction show good reversibility at multiple discharge/charge cycles due to materials' microstructural change and equilibrium. The origin of large hysteresis between discharge and charge is investigated and it can be attributed to multiple factors including ion mobility resistance at the two‐phase interface, intrinsic slow sodium ion diffusion kinetics, and irreversibility as well as ohmic voltage drop and overpotential. This study expects that such understandings will help pave the way for engineering design and optimization of materials microstructure for future‐generation batteries.     

On the Active Surface State of Nickel‐Ceria Solid Oxide Fuel Cell Anodes During Methane Electrooxidation

Solid oxide fuel cells (SOFCs) have grown in recognition as a viable technology able to convert chemical energy directly into electricity, with higher efficiencies than conventional thermal engines. Direct feeding of the SOFCs anode with hydrocarbons from fossil or renewable sources, appears more attractive compared to the use of hydrogen as a fuel. The addition of mixed oxide‐ion/electron conductors, like gadolinium‐doped ceria (GDC), to commonly used nickel‐based anodes is a well–known strategy that significantly enhances the performance of the SOFCs. Here we provide in situ experimental evidence of the active surface oxidation state and composition of Ni/GDC anodes during methane electroxidation using realistic solid oxide electrode assemblies. Ambient pressure X‐ray photoelectron and near edge X‐ray absorption fine structure spectroscopies (APPES and NEXAFS respectively) combined with on line electrical and gas phase measurements, were used to directly associate the surface state and the electrocatalytic performance of Ni/GDC anodes working at intermediate temperatures (700°C). A reduced anode surface (Ce³⁺ and Ni), with an optimum Ni to Ce surface composition, were found to be the most favorable configuration for maximum cell currents. Experimental results are rationalized on the basis of first principles calculations, proposing a detailed mechanism of the cell function.     

Unlocking Few‐Layered Ternary Chalcogenides for High‐Performance Potassium‐Ion Storage

Potassium‐ion batteries (KIBs) have attracted increasing attention for grid‐scale energy storage due to the abundance of potassium resources, low cost, and competitive energy density. The key challenge for KIBs is to develop high‐performance electrode materials. However, the exploration of high‐capacity and ultrastable electrodes for KIBs remains challenging because of the sluggish diffusion kinetics of K⁺ ions during the charging/discharging processes. This study reports for the first time a facile ion‐intercalation‐mediated exfoliation method with Mg²⁺ cations and NO₃^– anions as ion assistants for the fabrication of expanded few‐layered ternary Ta₂NiSe₅ (EF‐TNS) flakes with interlayer spacing up to 1.1 nm and abundant Se sites (NiSe₄ tetrahedra/TaSe₆ octahedra clusters) for superior potassium‐ion storage. The EF‐TNS deliver a high capacity of 315 mAh g^–1, excellent rate capability (121 mAh g^–1 at a current density of 1000 mA g^–1), and ultrastable cycling performance (81.4% capacity retention after 1100 cycles). Detailed theoretical analysis via first‐principles calculations and experimental results elucidate that K⁺ ions intercalate through the expanded interlayers effectively and prefer to transport along zigzag pathways in layered Ta₂NiSe₅. This work provides a new avenue for designing novel ternary intercalation/pseudocapacitance‐type KIBs with high capacity, excellent rate capability, and superior long‐term cycling performance.     

Dopant‐Free,Donor–Acceptor‐Type Polymeric Hole‐Transporting Materials for the Perovskite Solar Cells with Power Conversion Efficiencies over 20%

The rich molecular design of electron donor (D)–acceptor (A) polymers offers many valuable clues to obtain high‐efficiency hole‐transporting materials (HTMs) for use in perovskite solar cells (PVSCs). The fused aromatic or heteroaromatic units can increase the conjugation of the polymer backbone to facilitate electron delocalization, which increases the rigidity of adjacent units to prevent rotational disorder and lower the reorganization energy, leading to improved carrier mobility and optimized film morphology. In this work, fused‐ring ladder‐type indacenodithiophene and indacenodithieno[3,2‐b]thiophene are used as D units, benzodithiophene‐4,8‐dione as the A unit, and thienothiophene as a π‐bridge to form the D–A polymers PBDTT and PBTTT, respectively. Both polymers exhibit favorable properties as HTMs including suitable energy levels, high hole mobility, and excellent film quality. Both dopant‐free HTMs endow n‐i‐p PVSCs with promising performance and stability. A maximum power conversion efficiency of 20.28% is achieved for PBDTT‐based devices, which is among the highest values reported to date.     

Direct Imaging of Cl‐ and Cu‐Induced Short‐Circuit Efficiency Changes in CdTe Solar Cells

To achieve high‐efficiency polycrystalline CdTe‐based thin‐film solar cells, the CdTe absorbers must go through a post‐deposition CdCl₂ heat treatment followed by a Cu diffusion step. To better understand the roles of each treatment with regard to improving grains, grain boundaries, and interfaces, CdTe solar cells with and without Cu diffusion and CdCl₂ heat treatments are investigated using cross‐sectional electron beam induced current, electron backscatter diffraction, and scanning transmission electron microscope techniques. The evolution of the cross‐sectional carrier collection profile due to these treatments that cause an increase in short‐circuit current and higher open‐circuit voltage are identified. Additionally, an increased carrier collection in grain boundaries after either/both of these treatments is revealed. The increased current at the grain boundaries is shown to be due to the presence of a space charge region with an intrinsic carrier collection profile width of ≈350 nm. Scanning transmission electron microscope electron‐energy loss spectroscopy shows a decreased Te and increased Cl concentration in grain boundaries after treatment, which causes the inversion. Each treatment improves the overall carrier collection efficiency of the cell separately, and, therefore, the benefits realized by each treatment are shown to be independent of each other.     

Synthesis,Chiroptical Properties and Density Functional Theory Calculations of 3,3’‐Biphenyl‐2,2’‐BiTropone

The synthesis of new bitropone derivatives, namely, 3,3'‐biphenyl‐2,2'‐bitropone and 7,7’‐biphenyl‐2,2'‐bitropone, are reported. Isolation of enantiomers arising from restricted rotation around the C‐C bond connecting the tropone moieties was attempted by means of chiral high performance liquid chromatography (HPLC). No separation was obtained for 7,7’‐biphenyl‐2,2'‐bitropone. For 3,3'‐biphenyl‐2,2'‐bitropone, difficulties were encountered because of the low separation factor of the peaks and the presence of a rapid racemization process. However, quantitative chiroptical data on the antipodes were obtained by linking a circular dichroism (CD) spectrometer and a UV–vis spectrophotometric detector in series to the HPLC instrument. The analysis of the CD and UV–vis spectra in terms of absolute conformations was done with the help of theoretical calculations performed at the Density Functional Theory (DFT) level. The most stable conformations of the 3,3'‐biphenyl‐2,2'‐bitropone in its ground state were obtained. Starting from these minimum energy conformations, it was possible to compute theoretical CD and UV absorption spectra that fit well with the experimental ones. From this comparison the absolute configuration to the antipodes was assigned. Finally, the effect of the presence of the two lateral phenyl substituents on the structure of the bitropone and hence on the CD spectrum is discussed. Chirality 25:648–655, 2013. © 2013 Wiley Periodicals, Inc.     

NiFe‐Based Metal–Organic Framework Nanosheets Directly Supported on Nickel Foam Acting as Robust Electrodes for Electrochemical Oxygen Evolution Reaction

It is of great significance to develop highly efficient and superior stable oxygen evolution reaction (OER) electrocatalysts for upcoming electrochemical conversion technologies and clean energy systems. Here, an assembled 3D electrode is synthesized by a one‐step solvothermal process using such an original OER electrocatalyst. During the solvothermal process, Ni ions released from Ni foam in acidic solution and Fe ions added exogenously act as metal centers and coordinate with terephthalic acid (TPA) organic molecules by robust coordinate bonds, and finally, NiFe‐based metal–organic framework (MOF) nanosheets in situ grown on Ni foam, i.e., MIL‐53(FeNi)/NF, are prepared. This binder‐free 3D electrode shows superior OER activity with high current density (50 mA cm^?2) at an overpotential of 233 mV, a Tafel slope of 31.3 mV dec^?1, and excellent stability in alkaline aqueous solution (1 m KOH). It is discovered that introduction of Fe into MIL‐53 structure increases electrochemically‐active areas as well as reaction sites, accelerated electron transport capability, and modulated electronic structure to enhance catalytic performance. Besides, first principles calculations show that MIL‐53(FeNi) is more favorable for foreign atoms' adsorption and has increased 3d orbital electron density boosting intrinsic activity. This work elucidates a promising electrode for electrocatalysts and enriches direct application of MOF materials.     

Slow Organic‐to‐Inorganic Sub‐Lattice Thermalization in Methylammonium Lead Halide Perovskites Observed by Ultrafast Photoluminescence

Carrier dynamics in methylammonium lead halide (CH₃NH₃PbI_3–xCl_x) perovskite thin films, of differing crystal morphology, are examined as functions of temperature and excitation wavelength. At room temperature, long‐lived (>nanosecond) transient absorption signals indicate negligible carrier trapping. However, in measurements of ultrafast photoluminescence excited at 400 nm, a heretofore unexplained, large amplitude (50%–60%), 45 ps decay process is observed. This feature persists for temperatures down to the orthorhombic phase transition. Varying pump photon energy reveals that the fast, band‐edge photoluminescence (PL) decay only appears for excitation ≥2.38 eV (520 nm), with larger amplitudes for higher pump energies. Lower photon‐energy excitation yields slow dynamics consistent with negligible carrier trapping. Further, sub‐bandgap two‐photon pumping yields identical PL dynamics as direct absorption, signifying sensitivity to the total deposited energy and insensitivity to interfacial effects. Together with first principles electronic structure and ab initio molecular dynamics calculations, the results suggest the fast PL decay stems from excitation of high energy phonon modes associated with the organic sub‐lattice that temporarily enhance wavefunction overlap within the inorganic component owing to atomic displacement, thereby transiently changing the PL radiative rate during thermalization. Hence, the fast PL decay relates a characteristic organic‐to‐inorganic sub‐lattice equilibration timescale at optoelectronic‐relevant excitation energies.     

Electrical conduction behavior of organic light‐emitting diodes using fluorinated self‐assembled monolayer with molybdenum oxide‐doped hole transporting layer

The electrical conductivity behavior of a fluorinated self‐assembled monolayer (FSAM) of a molybdenum oxide (MoOx)‐doped α‐naphthyl diamine derivative (α‐NPD) in organic light‐emitting diodes (OLEDs) was investigated. The current density of the MoOx‐doped α‐NPD/FSAM device was proportional to its voltage owing to smooth carrier injection through the FSAM and the high carrier density of its bulk. The temperature‐dependent characteristics of this device were investigated. The current density–voltage characteristics at different temperatures were almost the same owing to its very low activation energy. The activation energy of the device was estimated to be 1.056 × 10^?2 [eV] and was very low due to the inelastic electron tunneling of FSAM molecules. Copyright © 2014 John Wiley & Sons, Ltd.     

A Layered–Tunnel Intergrowth Structure for High‐Performance Sodium‐Ion Oxide Cathode

Delivery of high‐energy density with long cycle life is facing a severe challenge in developing cathode materials for rechargeable sodium‐ion batteries (SIBs). Here a composite Na_0.6MnO₂ with layered–tunnel structure combining intergrowth morphology of nanoplates and nanorods for SIBs, which is clearly confirmed by micro scanning electron microscopy, high‐resolution transmission electron microscopy as well as scanning transmission electron microscopy with atomic resolution is presented. Owing to the integrated advantages of P2 layered structure with high capacity and that of the tunnel structure with excellent cycling stability and superior rate performance, the composite electrode delivers a reversible discharge capacity of 198.2 mAh g^?1 at 0.2C rate, leading to a high‐energy density of 520.4 Wh kg^?1. This intergrowth integration engineering strategy may modulate the physical and chemical properties in oxide cathodes and provide new perspectives on the optimal design of high‐energy density and high‐stable materials for SIBs.     

Unsaturated Sulfur Edge Engineering of Strongly Coupled MoS2 Nanosheet–Carbon Macroporous Hybrid Catalyst for Enhanced Hydrogen Generation

The low hydrogen adsorption free energy and strong acid/alkaline resistance of layered MoS₂ render it an excellent pH‐universal electrocatalyst for hydrogen evolution reaction (HER). However, the catalytic activity is dominantly suppressed by its limited active‐edge‐site density. Herein, a new strategy is reported for making a class of strongly coupled MoS₂ nanosheet–carbon macroporous hybrid catalysts with engineered unsaturated sulfur edges for boosting HER catalysis by controlling the precursor decomposition and subsequent sodiation/desodiation. Both surface chemical state analysis and first‐principles calculations verify that the resultant catalysts exhibit a desirable valence‐electron state with high exposure of unsaturated sulfur edges and an optimized hydrogen adsorption free energy, significantly improving the intrinsic HER catalytic activity. Such an electrocatalyst exhibits superior and stable catalytic activity toward HER with small overpotentials of 136 mV in 0.5 m H₂SO₄ and 155 mV in 1 m KOH at 10 mA cm^?2, which is the best report for MoS₂–C hybrid electrocatalysts to date. This work paves a new avenue to improve the intrinsic catalytic activity of 2D materials for hydrogen generation.     

Graded Bandgap Perovskite with Intrinsic n–p Homojunction Expands Photon Harvesting Range and Enables All Transport Layer‐Free Perovskite Solar Cells

Organic–inorganic halide perovskites are promising materials for next‐generation photovoltaic device due to their attractive photoelectrical properties such as strong light absorption, high carrier mobility, and tunable bandgap. Generally, perovskite solar cells require carrier transport layers (CTL) to provide a built‐in electric field and reduce the recombination rate. However, the construction of suitable electron‐ and hole‐transport layers is not cost effective, impairing the commercial application of the devices. An n–p perovskite homojunction absorber with a graded bandgap is developed by introducing a three‐step dynamic spin‐coating strategy and variable valence Sn elements. The bandgap of the perovskite absorber is gradually manipulated from 1.53 eV (the bottom) to 1.27 eV (the top). The electronic behavior is also transformed from n‐type (excess PbI₂, the bottom) to p‐type (Sn vacancy, the top) in a very short distance (50 nm). This designed perovskite homojunction electronic structure not only expands the light harvesting range from 800 to 970 nm which provides potential to break the PCE limits, but also promotes oriented carrier transportation and weakens the dependence on CTL. The demonstrated asymmetrical active layer shows a brand‐new approach to simplify the device structure and boost the performance of CTL‐free perovskite solar cells.     

Wet‐Chemical Processing of Phosphorus Composite Nanosheets for High‐Rate and High‐Capacity Lithium‐Ion Batteries

Phosphorus‐based materials are promising for high‐performance lithium‐ion battery (LIB) applications due to their high theoretical specific capacity. Currently, the existing physical methods render great difficulty toward rational engineering on the nanostructural phosphorus or its composites, thus limiting its high‐rate LIB applications. For the first time, a sublimation‐induced synthesis of phosphorus‐based composite nanosheets by a chemistry‐based solvothermal reaction is reported. Its formation mechanism involves solid–vapor–solid transformation driven by continuous vaporization–condensation process, as well as subsequent bottom‐up assembly growth. The proof‐of‐concept LIBs composed of the phosphorus‐based nanosheets achieve a high capacity of 630 mAh g^?1 at an ultrahigh current density of 20 A g^?1, which is attributed to efficient lithium‐ion diffusion and electron transfer. Such simple sublimation‐induced transformation opens up new prospects for rational engineering of phosphorus‐based materials for enhancing electrochemical performance.     

High‐Performance Lithium‐Sulfur Batteries with a Self‐Supported, 3D Li2S‐Doped Graphene Aerogel Cathodes

Lithium‐sulfur (Li‐S) batteries are being considered as the next‐generation high‐energy‐storage system due to their high theoretical energy density. However, the use of a lithium‐metal anode poses serious safety concerns due to lithium dendrite formation, which causes short‐circuiting, and possible explosions of the cell. One feasible way to address this issue is to pair a fully lithiated lithium sulfide (Li₂S) cathode with lithium metal‐free anodes. However, bulk Li₂S particles face the challenges of having a large activation barrier during the initial charge, low active‐material utilization, poor electrical conductivity, and fast capacity fade, preventing their practical utility. Here, the development of a self‐supported, high capacity, long‐life cathode material is presented for Li‐S batteries by coating Li₂S onto doped graphene aerogels via a simple liquid infiltration–evaporation coating method. The resultant cathodes are able to lower the initial charge voltage barrier and attain a high specific capacity, good rate capability, and excellent cycling stability. The improved performance can be attributed to the (i) cross‐linked, porous graphene network enabling fast electron/ion transfer, (ii) coated Li₂S on graphene with high utilization and a reduced energy barrier, and (iii) doped heteroatoms with a strong binding affinity toward Li₂S/lithium polysulfides with reduced polysulfide dissolution based on first‐principles calculations.     

Ambient‐Pressure Relithiation of Degraded LixNi0.5Co0.2Mn0.3O2 (0 < x < 1) via Eutectic Solutions for Direct Regeneration of Lithium‐Ion Battery Cathodes

With the rapid growth of the lithium‐ion battery (LIBs) market, recycling and re‐use of end‐of‐life LIBs to reclaim lithium (Li) and transition metal (TM) resources (e.g., Co, Ni), as well as eliminating pollution from disposal of waste batteries, has become an urgent task. Here, for the first time the ambient‐pressure relithiation of degraded LiNi_0.5Co_0.2Mn_0.3O₂ (NCM523) cathodes via eutectic Li⁺ molten‐salt solutions is successfully demonstrated. Combining such a low‐temperature relithiation process with a well‐designed thermal annealing step, NCM523 cathode particles with significant Li loss (≈40%) and capacity degradation (≈50%) can be successfully regenerated to achieve their original composition and crystal structures, leading to effective recovery of their capacity, cycling stability, and rate capability to the levels of the pristine materials. Advanced characterization tools including atomic resolution electron microscopy imaging and electron energy loss spectroscopy are combined to demonstrate that NCM523's original layered crystal structure is recovered. For the first time, it is shown that layer‐to‐rock salt phase change on the surfaces and subsurfaces of the cathode materials can be reversed if lithium can be incorporated back to the material. The result suggests the great promise of using eutectic Li⁺ molten–salt solutions for ambient‐pressure relithiation to recycle and remanufacture degraded LIB cathode materials.