Hollow NiCo2S4 Nanospheres Hybridized with 3D Hierarchical Porous rGO/Fe2O3 Composites toward High‐Performance Energy Storage Device

Hierarchical hollow NiCo₂S₄ microspheres with a tunable interior architecture are synthesized by a facile and cost‐effective hydrothermal method, and used as a cathode material. A three‐dimensional (3D) porous reduced graphene oxide/Fe₂O₃ composite (rGO/Fe₂O₃) with precisely controlled particle size and morphology is successfully prepared through a scalable facile approach, with well‐dispersed Fe₂O₃ nanoparticles decorating the surface of rGO sheets. The fixed Fe₂O₃ nanoparticles in graphene efficiently prevent the intermediates during the redox reaction from dissolving into the electrolyte, resulting in long cycle life. KOH activation of the rGO/Fe₂O₃ composite is conducted for the preparation of an activated carbon material–based hybrid to transform into a 3D porous carbon material–based hybrid. An energy storage device consisting of hollow NiCo₂S₄ microspheres as the positive electrode, the 3D porous rGO/Fe₂O₃ composite as the negative electrode, and KOH solution as the electrolyte with a maximum energy density of 61.7 W h kg^?1 is achieved owing to its wide operating voltage range of 0–1.75 V and the designed 3D structure. Moreover, the device exhibits a high power density of 22 kW kg^?1 and a long cycle life with 90% retention after 1000 cycles at the current density of 1 A g^?1.     

Ultrathin and Porous Ni3S2/CoNi2S4 3D‐Network Structure for Superhigh Energy Density Asymmetric Supercapacitors

3D‐networked, ultrathin, and porous Ni₃S₂/CoNi₂S₄ on Ni foam (NF) is successfully designed and synthesized by a simple sulfidation process from 3D Ni–Co precursors. Interestingly, the edge site‐enriched Ni₃S₂/CoNi₂S₄/NF 3D‐network is realized by the etching‐like effect of S^2? ions, which made the surfaces of Ni₃S₂/CoNi₂S₄/NF with a ridge‐like feature. The intriguing structural/compositional/componental advantages endow 3D‐networked‐free‐standing Ni₃S₂/CoNi₂S₄/NF electrodes better electrochemical performance with specific capacitance of 2435 F g^?1 at a current density of 2 A g^?1 and an excellent rate capability of 80% at 20 A g^?1. The corresponding asymmetric supercapacitor achieves a high energy density of 40.0 W h kg^?1 at an superhigh power density of 17.3 kW kg^?1, excellent specific capacitance (175 F g^?1 at 1A g^?1), and electrochemical cycling stability (92.8% retention after 6000 cycles) with Ni₃S₂/CoNi₂S₄/NF as the positive electrode and activated carbon/NF as the negative electrode. Moreover, the temperature dependences of cyclic voltammetry curve polarization and specific capacitances are carefully investigated, and become more obvious and higher, respectively, with the increase of test temperature. These can be attributed to the components' synergetic effect assuring rich redox reactions, high conductivity as well as highly porous but robust architectures. This work provides a general, low‐cost route to produce high performance electrode materials for portable supercapacitor applications on a large scale.     

Activation of Wnt/β‐catenin signalling is required for TGF‐β/Smad2/3 signalling during myofibroblast proliferation

Fibrosis in animal models and human diseases is associated with aberrant activation of the Wnt/β‐catenin pathway. Despite extensive research efforts, effective therapies are still not available. Myofibroblasts are major effectors, responsible for extracellular matrix deposition. Inhibiting the proliferation of the myofibroblast is crucial for treatment of fibrosis. Proliferation of myofibroblasts can have many triggering effects that result in fibrosis. In recent years, the Wnt pathway has been studied as an underlying factor as a primary contributor to fibrotic diseases. These efforts notwithstanding, the specific mechanisms by which Wnt‐mediated promotes fibrosis reaction remain obscure. The central role of the transforming growth factor‐β (TGF‐β) and myofibroblast activity in the pathogenesis of fibrosis has become generally accepted. The details of interaction between these two processes are not obvious. The present investigation was conducted to evaluate the level of sustained expression of fibrosis iconic proteins (vimentin, α‐SMA and collagen I) and the TGF‐β signalling pathway that include smad2/3 and its phosphorylated form p‐smad2/3. Detailed analysis of the possible molecular mechanisms mediated by β‐catenin revealed epithelial–mesenchymal transition and additionally demonstrated transitions of fibroblasts to myofibroblast cell forms, along with increased activity of β‐catenin in regulation of the signalling network, which acts to counteract autocrine TGF‐β/smad2/3 signalling. A major outcome of this study is improved insight into the mechanisms by which epithelial and mesenchymal cells activated by TGFβ1‐smad2/3 signalling through Wnt/β‐catenin contribute to lung fibrosis.     

幂指数异速生长机制模型综述

 个体大小对生物的各种生理属性有重要意义, 描述个体大小和生理属性关系的规律叫做异速生长。生物的异速生长通常以幂函数的形 式表示, 在众多的异速生长关系中, Kleiber定律所描述的新陈代谢率和个体大小的3/4幂指数关系最为重要和基本, 解释此有充分数据支持的 定律的机理也最具挑战性。围绕该著名的3/4幂指数异速生长关系, 该文回顾历史上主要的有关模型假说, 并重点介绍1990年代中期以来, 由 West等提出的分形分配网络模型和由其它研究人员建立的代表性模型: 最少载体网络模型、多因理论、最小总熵理论、构造理论、细胞优化生 长理论和能量消耗理论。     

A 3D Trilayered CNT/MoSe2/C Heterostructure with an Expanded MoSe2 Interlayer Spacing for an Efficient Sodium Storage

Freestanding composite structures with embedded transition metal dichalcogenides (TMDCs) as the active material are highly attractive in the development of advanced electrodes for energy storage devices. Most 3D electrodes consist of a bilayer design involving a core–shell combination. To further enhance the gravimetric and areal capacities, a 3D trilayer design is proposed that has MoSe₂ as the TMDC sandwiched in‐between an inner carbon nanotube (CNT) core and an outer carbon layer to form a CNT/MoSe₂/C framework. The CNT core creates interconnected pathways for the e^?/Na⁺ conduction, while the conductive inert carbon layer not only protects the corrosive environment between the electrolyte and MoSe₂ but also is fully tunable for an optimized Na⁺ storage. This unique heterostructure is synthesized via a solvothermal‐carbonization approach. Due to annealing under a confined structural configuration, MoSe₂ interlayer spaces are expanded to facilitate a faster Na⁺ diffusion. It is shown that an ≈3 nm thick carbon layer yielded an optimized anode for a sodium‐ion battery. The 3D porosity of the heterostructure remains intact after an intense densification process to produce a high areal capacity of 4.0 mAh cm^?2 and a high mass loading of 13.9 mg cm^?2 with a gravimetric capacity of 347 mAh g^?1 at 500 mA g^?1 after 500 cycles.     

Highly Efficient and Stable Solar Cells with 2D MA3Bi2I9/3D MAPbI3 Heterostructured Perovskites

Organic–inorganic hybrid lead halide perovskites are emerging as highly promising candidates for highly efficient thin film photovoltaics due to their excellent optoelectronic properties and low‐temperature process capability. However, the long‐term stability in ambient air still is a key issue limiting their further practical applications. Herein, the enhancement of both performance and stability of perovskite solar cells is reported by employing 2D and 3D heterostructured perovskite films with unique nanoplate/nanocrystalline morphology. The 2D/3D heterostructured perovskites combine advantages of the high‐performance lead‐based perovskite 3D CH₃NH₃PbI₃ (MAPbI₃) and the air‐stable bismuth‐based quasi‐perovskite 2D MA₃Bi₂I₉. In the 2D/3D heterostructure, the hydrophobic MA₃Bi₂I₉ platelets vertically situate between the MAPbI₃ grains, forming a lattice‐like structure to tightly enclose the 3D MAPbI₃ perovskite grains. The solar cell based on the optimal 2D/3D (9.2%) heterostructured film achieves a high efficiency of 18.97%, with remarkably reduced hysteresis and significantly improved stability. The work demonstrates that construction of 2D/3D heterostructured films by hybridizing different species of perovskite materials is a feasible way to simultaneously enhance both efficiency and stability of perovskite solar cells.     

Characterization of (2S,2'R,3'R)-2-(2',3'-[3H]-Dicarboxycyclopropyl)glycine Binding in Rat Brain

Abstract: [(2S,2′R,3′R)-2-(2′,3′-[³H]Dicarboxycyclopropyl)glycine ([³H]DCG IV) binding was characterized in vitro in rat brain cortex homogenates and rat brain sections. In cortex homogenates, the binding was saturable and the saturation isotherm indicated the presence of a single binding site with a K_D value of 180 ± 33 nM and a B_max of 780 ± 70 fmol/mg of protein. The nonspecific binding, measured using 100 µM LY354740, was <30%. NMDA, AMPA, kainate, l (?)-threo-3-hydroxyaspartic acid, and (S)-3,5-dihydroxyphenylglycine were all inactive in [³H]DCG IV binding up to 1 mM. However, several compounds inhibited [³H]DCG IV binding in a concentration-dependent manner with the following rank order of potency: LY341495 = LY354740 > DCG IV = (2S,1′S,2′S)-2-(2-carboxycyclopropyl)glycine > (1S,3R)-1-aminocyclopentane-1,3-dicarboxylic acid > (2S,1′S,2′S)-2-methyl-2-(2-carboxycyclopropyl)glycine > l -glutamate = ibotenate > quisqualate > (RS)-α-methyl-4-phosphonophenylglycine = l (+)-2-amino-3-phosphonopropionic acid > (S)-α-methyl-4-carboxyphenylglycine > (2S)-α-ethylglutamic acid > l (+)-2-amino-4-phosphonobutyric acid. N-Acetyl-l -aspartyl-l -glutamic acid inhibited the binding in a biphasic manner with an IC₅₀ of 0.2 µM for the high-affinity component. The binding was also affected by GTPγS, reducing agents, and CdCl₂. In parasagittal sections of rat brain, a high density of specific binding was observed in the accessory olfactory bulb, cortical regions (layers 1, 3, and 4 > 2, 5, and 6), caudate putamen, molecular layers of the hippocampus and dentate gyrus, subiculum, presubiculum, retrosplenial cortex, anteroventral thalamic nuclei, and cerebellar granular layer, reflecting its preferential (perhaps not exclusive) affinity for pre- and postsynaptic metabotropic glutamate mGlu2 receptors. Thus, the pharmacology, tissue distribution, and sensitivity to GTPγS show that [³H]DCG IV binding is probably to group II metabotropic glutamate receptors in rat brain.     

Membrane‐Free Zn/MnO2 Flow Battery for Large‐Scale Energy Storage

The traditional Zn/MnO₂ battery has attracted great interest due to its low cost, high safety, high output voltage, and environmental friendliness. However, it remains a big challenge to achieve long‐term stability, mainly owing to the poor reversibility of the cathode reaction. Different from previous studies where the cathode redox reaction of MnO₂/MnOOH is in solid state with limited reversibility, here a new aqueous rechargeable Zn/MnO₂ flow battery is constructed with dissolution–precipitation reactions in both cathodes (Mn²⁺/MnO₂) and anodes (Zn²⁺/Zn), which allow mixing of anolyte and catholyte into only one electrolyte and remove the requirement for an ion selective membrane for cost reduction. Impressively, this new battery exhibits a high discharge voltage of ≈1.78 V, good rate capability (10C discharge), and excellent cycling stability (1000 cycles without decay) at the areal capacity ranging from 0.5 to 2 mAh cm^‐2. More importantly, this battery can be readily enlarged to a bench scale flow cell of 1.2 Ah with good capacity retention of 89.7% at the 500th cycle, displaying great potential for large‐scale energy storage.     

Mir‐29b promotes human aortic valve interstitial cell calcification via inhibiting TGF‐β3 through activation of wnt3/β‐catenin/Smad3 signaling

Herein, we hypothesized that pro‐osteogenic MicroRNAs (miRs) could play functional roles in the calcification of the aortic valve and aimed to explore the functional role of miR‐29b in the osteoblastic differentiation of human aortic valve interstitial cells (hAVICs) and the underlying molecular mechanism. Osteoblastic differentiation of hAVICs isolated from human calcific aortic valve leaflets obtained intraoperatively was induced with an osteogenic medium. Alizarin red S staining was used to evaluate calcium deposition. The protein levels of osteogenic markers and other proteins were evaluated using western blotting and/or immunofluorescence while qRT‐PCR was applied for miR and mRNA determination. Bioinformatics and luciferase reporter assay were used to identify the possible interaction between miR‐29b and TGF‐β3. Calcium deposition and the number of calcification nodules were pointedly and progressively increased in hAVICs during osteogenic differentiation. The levels of osteogenic and calcification markers were equally increased, thus confirming the mineralization of hAVICs. The expression of miR‐29b was significantly increased during osteoblastic differentiation. Furthermore, the osteoblastic differentiation of hAVICs was significantly inhibited by the miR‐29b inhibition. TGF‐β3 was markedly downregulated while Smad3, Runx2, wnt3, and β‐catenin were significantly upregulated during osteogenic induction at both the mRNA and protein levels. These effects were systematically induced by miR‐29b overexpression while the inhibition of miR‐29b showed the inverse trends. Moreover, TGF‐β3 was a direct target of miR‐29b. Inhibition of miR‐29b hinders valvular calcification through the upregulation of the TGF‐β3 via inhibition of wnt/β‐catenin and RUNX2/Smad3 signaling pathways.